arm: omap3: Fix tao3530/omap3_ha SPL boot hangup (GPIO clocks not enabled)
PATCH 1/1 arm: omap3: Fix tao3530/omap3_ha SPL boot hangup (GPIO clocks not enabled)
Patch f33b9bd3
[arm: omap3: Enable clocks for peripherals only if they are used] breaks SPL booting on tao3530. Since some gpio input's are read to detect the board revision. But with this patch above, the clocks to the GPIO subsystems are not enabled per default any more. The GPIO banks need to be configured specifically now.
--- include/configs/tao3530.h | 7 +++++++ 1 file changed, 7 insertions(+)
include/configs/tao3530.h +7 -0
@@ -83,6 +83,13 @@#define CONFIG_OMAP_HSMMC #define CONFIG_DOS_PARTITION +/* GPIO banks */ +#define CONFIG_OMAP3_GPIO_2 /* GPIO32 ..63 is in GPIO bank 2 */ +#define CONFIG_OMAP3_GPIO_3 /* GPIO64 ..95 is in GPIO bank 3 */ +#define CONFIG_OMAP3_GPIO_4 /* GPIO96 ..127 is in GPIO bank 4 */ +#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */ +#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ +/* commands to include */ #include <config_cmd_default.h>
Signature · 1 line
1.8.5.4
PATCH 1/1 arm: omap3: Fix tao3530/omap3_ha SPL boot hangup (GPIO clocks not enabled)
Hi Stefan,
Quoted 23 lines · Stefan Roese
Patch
f33b9bd3
[arm: omap3: Enable clocks for peripherals only if they are used] breaks SPL booting on tao3530. Since some gpio input's are read to detect the board revision. But with this patch above, the clocks to the GPIO subsystems are not enabled per default any more. The GPIO banks need to be configured specifically now.Signed-off-by Stefan Roese <[email protected]>Cc Tom Rini <[email protected]>Cc Michael Trimarchi <[email protected]>--- include/configs/tao3530.h | 7 +++++++ 1 file changed, 7 insertions(+)include/configs/tao3530.h +0
-0@@ -83,6 +83,13 @@#define CONFIG_OMAP_HSMMC #define CONFIG_DOS_PARTITION
include/configs/tao3530.h line 95
Quoted 10 lines
include/configs/tao3530.h +7
-0+/* GPIO banks */ +#define CONFIG_OMAP3_GPIO_2 /* GPIO32 ..63 is in GPIO bank 2 */ +#define CONFIG_OMAP3_GPIO_3 /* GPIO64 ..95 is in GPIO bank 3 */ +#define CONFIG_OMAP3_GPIO_4 /* GPIO96 ..127 is in GPIO bank 4 */ +#define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */ +#define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */ +/* commands to include */ #include <config_cmd_default.h>
I confirm the issue, I will send a similar patch for the mcx board.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
Quoted 11 lines · Stefan Roese
Patch
f33b9bd3
[arm: omap3: Enable clocks for peripherals only if they are used] breaks SPL booting on tao3530. Since some gpio input's are read to detect the board revision. But with this patch above, the clocks to the GPIO subsystems are not enabled per default any more. The GPIO banks need to be configured specifically now.Signed-off-by Stefan Roese <[email protected]>Cc Tom Rini <[email protected]>Cc Michael Trimarchi <[email protected]>Reviewed-by Stefano Babic <[email protected]>
Applied to u-boot-ti/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140221/2fdff101/attachment.pgp>