xfsprogs: mkfs fixes
cover xfsprogs: mkfs fixes
Hi folks,
The first patch is an update to the patch I sent a while back to reduce the default log size of small filesystems back to new to the 3.1.x sizes. I've incorporated the changes Brian an I discussed, and it makes all the xfstets that expect specific log sizes for certain sized filesystems pass again.
The second patch fixes an oversight when adding dirent ftype support to mkfs - the protofile code that creates files in the filesystem at mkfs time does nto set the ftype value in the directory structures, so xfs_repair complains on a freshly made filesystem that the ftypes aren't correct.
Cheers,
Dave.
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
PATCH 1/2 mkfs: default log size for small filesystems too large
From: Dave Chinner <[email protected]>
Recent changes to the log size scaling have resulted in using the default size multiplier for the log size even on small filesystems. Commit 88cd79b ("xfs: Add xfs_log_rlimit.c") changed the calculation of the maximum transaction size that the kernel would issues and that significantly increased the minimum size of the default log. As such the size of the log on small filesystems was typically larger than the prefious default, even though the previous default was still larger than the minimum needed.
Rework the default log size calculation such that it will use the original log size default if it is larger than the minimum log size required, and only use a larger log if the configuration of the filesystem requires it.
This is especially obvious in xfs/216, where the default log size is 10MB all the way up to 16GB filesystems. The current mkfs selects a log size of 50MB for the same size filesystems and this is unnecessarily large.
Return the scaling of the log size for small filesystems to something similar to what xfs/216 expects.
--- mkfs/xfs_mkfs.c | 48 ++++++++++++++++++++++++++++-------------------- 1 file changed, 28 insertions(+), 20 deletions(-)
mkfs/xfs_mkfs.c +28 -20
@@ -2366,32 +2366,40 @@ _("size %s specified for log subvolume is too large, maximum is %lld blocks\n"), }else if (!loginternal && !xi.logdev) { logblocks =0 ; }else if (loginternal && !logsize) { -/* -* With a 2GB max log size, default to maximum size -* at 4TB. This keeps the same ratio from the older -* max log size of 128M at 256GB fs size. IOWs, -* the ratio of fs size to log size is 2048:1. -*/ - logblocks = (dblocks << blocklog) /2048 ; - logblocks = logblocks >> blocklog; - logblocks =MAX (min_logblocks, logblocks); -/* -* If the default log size doesn't fit in the AG size, use the -* minimum log size instead. This ensures small filesystems -* don't use excessive amounts of space for the log. -*/ -if (min_logblocks *XFS_DFL_LOG_FACTOR >= agsize) { +if (dblocks <GIGABYTES (1 , blocklog)) { +/* tiny filesystems get minimum sized logs. */ logblocks = min_logblocks; + }else if (dblocks <GIGABYTES (16 , blocklog)) { + +/* +* For small filesystems, we want to use the +* XFS_MIN_LOG_BYTES for filesystems smaller than 16G if +* at all possible, ramping up to 128MB at 256GB. +*/ + logblocks =MIN (XFS_MIN_LOG_BYTES >> blocklog, + min_logblocks *XFS_DFL_LOG_FACTOR ); }else { - logblocks =MAX (logblocks, -MAX (XFS_DFL_LOG_SIZE , - min_logblocks *XFS_DFL_LOG_FACTOR )); +/* +* With a 2GB max log size, default to maximum size +* at 4TB. This keeps the same ratio from the older +* max log size of 128M at 256GB fs size. IOWs, +* the ratio of fs size to log size is 2048:1. +*/ + logblocks = (dblocks << blocklog) /2048 ; + logblocks = logblocks >> blocklog; + logblocks =MAX (min_logblocks, logblocks); } + +/* make sure the log fits wholly within an AG */ +if (logblocks >= agsize) + logblocks = min_logblocks; + +/* and now clamp the size to the maximum supported size */ logblocks =MIN (logblocks,XFS_MAX_LOG_BLOCKS ); -if ((logblocks << blocklog) >XFS_MAX_LOG_BYTES ) { +if ((logblocks << blocklog) >XFS_MAX_LOG_BYTES ) logblocks =XFS_MAX_LOG_BYTES >> blocklog; - } + }validate_log_size (logblocks, blocklog, min_logblocks);
Signature · 6 lines
1.8.4.rc3 _______________________________________________ xfs mailing list [email protected] http://oss.sgi.com/mailman/listinfo/xfs
Re: [PATCH 1/2] mkfs: default log size for small filesystems too large
Quoted 16 lines · Dave Chinner
From: Dave Chinner <[email protected]>
Recent changes to the log size scaling have resulted in using the default size multiplier for the log size even on small filesystems. Commit 88cd79b ("xfs: Add
xfs_log_rlimit.c") changed the calculation of the maximum transaction size that the kernel would issues and that significantly increased the minimum size of the default log. As such the size of the log on small filesystems was typically larger than the prefious default, even though the previous default was still larger than the minimum needed.Rework the default log size calculation such that it will use the original log size default if it is larger than the minimum log size required, and only use a larger log if the configuration of the filesystem requires it.
Quoted 7 lines
This is especially obvious in xfs/216, where the default log size is 10MB all the way up to 16GB filesystems. The current mkfs selects a log size of 50MB for the same size filesystems and this is unnecessarily large.
Return the scaling of the log size for small filesystems to something similar to what xfs/216 expects.
I can confirm that this fixes xfs/216, but I've lost the thread on why log size scaling was changed at all in 88cd79b, and why we now end up with something different in mkfs.xfs than what we originally had.... Are there resulting functional changes? Cosmetic? What's going on with log scaling, and who moved my cheese? :)
-Eric
Quoted 61 lines
Signed-off-by Dave Chinner <[email protected]>--- mkfs/xfs_mkfs.c | 48 ++++++++++++++++++++++++++++-------------------- 1 file changed, 28 insertions(+), 20 deletions(-)mkfs/xfs_mkfs.c +25
-18@@ -2366,32 +2366,40 @@ _("size %s specified for log subvolume is too large, maximum is %lld blocks\n"), }else if (!loginternal && !xi.logdev) { logblocks =0 ; }else if (loginternal && !logsize) { -/* -* With a 2GB max log size, default to maximum size -* at 4TB. This keeps the same ratio from the older -* max log size of 128M at 256GB fs size. IOWs, -* the ratio of fs size to log size is 2048:1. -*/ - logblocks = (dblocks << blocklog) /2048 ; - logblocks = logblocks >> blocklog; - logblocks =MAX (min_logblocks, logblocks); -/* -* If the default log size doesn't fit in the AG size, use the -* minimum log size instead. This ensures small filesystems -* don't use excessive amounts of space for the log. -*/ -if (min_logblocks *XFS_DFL_LOG_FACTOR >= agsize) { +if (dblocks <GIGABYTES (1 , blocklog)) { +/* tiny filesystems get minimum sized logs. */ logblocks = min_logblocks; + }else if (dblocks <GIGABYTES (16 , blocklog)) { + +/* +* For small filesystems, we want to use the +* XFS_MIN_LOG_BYTES for filesystems smaller than 16G if +* at all possible, ramping up to 128MB at 256GB. +*/ + logblocks =MIN (XFS_MIN_LOG_BYTES >> blocklog, + min_logblocks *XFS_DFL_LOG_FACTOR ); }else { - logblocks =MAX (logblocks, -MAX (XFS_DFL_LOG_SIZE , - min_logblocks *XFS_DFL_LOG_FACTOR )); +/* +* With a 2GB max log size, default to maximum size +* at 4TB. This keeps the same ratio from the older +* max log size of 128M at 256GB fs size. IOWs, +* the ratio of fs size to log size is 2048:1. +*/ + logblocks = (dblocks << blocklog) /2048 ; + logblocks = logblocks >> blocklog; + logblocks =MAX (min_logblocks, logblocks); } + +/* make sure the log fits wholly within an AG */ +if (logblocks >= agsize) + logblocks = min_logblocks; +
mkfs/xfs_mkfs.c _("size %s specified for log subvolume is too large, maximum is %lld blocks\n"), · line 2405
Quoted 10 lines
mkfs/xfs_mkfs.c +3
-2+/* and now clamp the size to the maximum supported size */ logblocks =MIN (logblocks,XFS_MAX_LOG_BLOCKS ); -if ((logblocks << blocklog) >XFS_MAX_LOG_BYTES ) { +if ((logblocks << blocklog) >XFS_MAX_LOG_BYTES ) logblocks =XFS_MAX_LOG_BYTES >> blocklog; - } + }validate_log_size (logblocks, blocklog, min_logblocks);
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Re: [PATCH 1/2] mkfs: default log size for small filesystems too large
Quoted 22 lines · Eric Sandeen
Quoted 21 lines · Dave Chinner
From: Dave Chinner <[email protected]>
Recent changes to the log size scaling have resulted in using the default size multiplier for the log size even on small filesystems. Commit 88cd79b ("xfs: Add
xfs_log_rlimit.c") changed the calculation of the maximum transaction size that the kernel would issues and that significantly increased the minimum size of the default log. As such the size of the log on small filesystems was typically larger than the prefious default, even though the previous default was still larger than the minimum needed.Rework the default log size calculation such that it will use the original log size default if it is larger than the minimum log size required, and only use a larger log if the configuration of the filesystem requires it.
This is especially obvious in xfs/216, where the default log size is 10MB all the way up to 16GB filesystems. The current mkfs selects a log size of 50MB for the same size filesystems and this is unnecessarily large.
Quoted 8 lines
Quoted 2 lines
Return the scaling of the log size for small filesystems to something similar to what xfs/216 expects.
I can confirm that this fixes xfs/216, but I've lost the thread on why log size scaling was changed at all in 88cd79b, and why we now end up with something different in mkfs.xfs than what we originally had.... Are there resulting functional changes? Cosmetic? What's going on with log scaling, and who moved my cheese? :)
tl;dr: I screwed up with the original change that caused the log size to increase. It wasn't caught by review, it caused quite a few problems for xfstests, and some of the things it was doing made no sense. So this patch is reverting the behaviour back to -almost- the same as the 3.1.x series.
The only difference is that now the minimum log size takes into account sunit padding on log writes IOWs, the log sizes should be identical to 3.1.x for filesystems with lsu=0 and that's why tests like xfs/216 pass again....
Cheers,
Dave.
Signature · 7 lines
Dave Chinner [email protected] _______________________________________________ xfs mailing list [email protected] http://oss.sgi.com/mailman/listinfo/xfs
Re: [PATCH 1/2] mkfs: default log size for small filesystems too large
In reply to Dave ChinnerQuoted 21 lines · Dave Chinner
From: Dave Chinner <[email protected]>
Recent changes to the log size scaling have resulted in using the default size multiplier for the log size even on small filesystems. Commit 88cd79b ("xfs: Add
xfs_log_rlimit.c") changed the calculation of the maximum transaction size that the kernel would issues and that significantly increased the minimum size of the default log. As such the size of the log on small filesystems was typically larger than the prefious default, even though the previous default was still larger than the minimum needed.Rework the default log size calculation such that it will use the original log size default if it is larger than the minimum log size required, and only use a larger log if the configuration of the filesystem requires it.
This is especially obvious in xfs/216, where the default log size is 10MB all the way up to 16GB filesystems. The current mkfs selects a log size of 50MB for the same size filesystems and this is unnecessarily large.
Quoted 4 lines
Return the scaling of the log size for small filesystems to something similar to what xfs/216 expects.
Signed-off-by Dave Chinner <[email protected]>
Looks good.
Quoted 60 lines
--- mkfs/xfs_mkfs.c | 48 ++++++++++++++++++++++++++++-------------------- 1 file changed, 28 insertions(+), 20 deletions(-)mkfs/xfs_mkfs.c +25
-18@@ -2366,32 +2366,40 @@ _("size %s specified for log subvolume is too large, maximum is %lld blocks\n"), }else if (!loginternal && !xi.logdev) { logblocks =0 ; }else if (loginternal && !logsize) { -/* -* With a 2GB max log size, default to maximum size -* at 4TB. This keeps the same ratio from the older -* max log size of 128M at 256GB fs size. IOWs, -* the ratio of fs size to log size is 2048:1. -*/ - logblocks = (dblocks << blocklog) /2048 ; - logblocks = logblocks >> blocklog; - logblocks =MAX (min_logblocks, logblocks); -/* -* If the default log size doesn't fit in the AG size, use the -* minimum log size instead. This ensures small filesystems -* don't use excessive amounts of space for the log. -*/ -if (min_logblocks *XFS_DFL_LOG_FACTOR >= agsize) { +if (dblocks <GIGABYTES (1 , blocklog)) { +/* tiny filesystems get minimum sized logs. */ logblocks = min_logblocks; + }else if (dblocks <GIGABYTES (16 , blocklog)) { + +/* +* For small filesystems, we want to use the +* XFS_MIN_LOG_BYTES for filesystems smaller than 16G if +* at all possible, ramping up to 128MB at 256GB. +*/ + logblocks =MIN (XFS_MIN_LOG_BYTES >> blocklog, + min_logblocks *XFS_DFL_LOG_FACTOR ); }else { - logblocks =MAX (logblocks, -MAX (XFS_DFL_LOG_SIZE , - min_logblocks *XFS_DFL_LOG_FACTOR )); +/* +* With a 2GB max log size, default to maximum size +* at 4TB. This keeps the same ratio from the older +* max log size of 128M at 256GB fs size. IOWs, +* the ratio of fs size to log size is 2048:1. +*/ + logblocks = (dblocks << blocklog) /2048 ; + logblocks = logblocks >> blocklog; + logblocks =MAX (min_logblocks, logblocks); } + +/* make sure the log fits wholly within an AG */ +if (logblocks >= agsize) + logblocks = min_logblocks; +
mkfs/xfs_mkfs.c _("size %s specified for log subvolume is too large, maximum is %lld blocks\n"), · line 2405
Quoted 10 lines
mkfs/xfs_mkfs.c +3
-2+/* and now clamp the size to the maximum supported size */ logblocks =MIN (logblocks,XFS_MAX_LOG_BLOCKS ); -if ((logblocks << blocklog) >XFS_MAX_LOG_BYTES ) { +if ((logblocks << blocklog) >XFS_MAX_LOG_BYTES ) logblocks =XFS_MAX_LOG_BYTES >> blocklog; - } + }validate_log_size (logblocks, blocklog, min_logblocks);
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Re: [PATCH 1/2] mkfs: default log size for small filesystems too large
In reply to Dave ChinnerQuoted 21 lines · Dave Chinner
From: Dave Chinner <[email protected]>
Recent changes to the log size scaling have resulted in using the default size multiplier for the log size even on small filesystems. Commit 88cd79b ("xfs: Add
xfs_log_rlimit.c") changed the calculation of the maximum transaction size that the kernel would issues and that significantly increased the minimum size of the default log. As such the size of the log on small filesystems was typically larger than the prefious default, even though the previous default was still larger than the minimum needed.Rework the default log size calculation such that it will use the original log size default if it is larger than the minimum log size required, and only use a larger log if the configuration of the filesystem requires it.
This is especially obvious in xfs/216, where the default log size is 10MB all the way up to 16GB filesystems. The current mkfs selects a log size of 50MB for the same size filesystems and this is unnecessarily large.
Quoted 5 lines
Return the scaling of the log size for small filesystems to something similar to what xfs/216 expects.
Signed-off-by Dave Chinner <[email protected]>---
The code for the <16GB case still looks funny to me, but we beat that horse to death on irc. ;) I do like the breakdown of logic to select the log size calculation based on the particular situation, and the end result seems to be what we want. The additional comments help too. :)
Quoted 75 lines
mkfs/xfs_mkfs.c | 48 ++++++++++++++++++++++++++++-------------------- 1 file changed, 28 insertions(+), 20 deletions(-)mkfs/xfs_mkfs.c +28
-20@@ -2366,32 +2366,40 @@ _("size %s specified for log subvolume is too large, maximum is %lld blocks\n"), }else if (!loginternal && !xi.logdev) { logblocks =0 ; }else if (loginternal && !logsize) { -/* -* With a 2GB max log size, default to maximum size -* at 4TB. This keeps the same ratio from the older -* max log size of 128M at 256GB fs size. IOWs, -* the ratio of fs size to log size is 2048:1. -*/ - logblocks = (dblocks << blocklog) /2048 ; - logblocks = logblocks >> blocklog; - logblocks =MAX (min_logblocks, logblocks); -/* -* If the default log size doesn't fit in the AG size, use the -* minimum log size instead. This ensures small filesystems -* don't use excessive amounts of space for the log. -*/ -if (min_logblocks *XFS_DFL_LOG_FACTOR >= agsize) { +if (dblocks <GIGABYTES (1 , blocklog)) { +/* tiny filesystems get minimum sized logs. */ logblocks = min_logblocks; + }else if (dblocks <GIGABYTES (16 , blocklog)) { + +/* +* For small filesystems, we want to use the +* XFS_MIN_LOG_BYTES for filesystems smaller than 16G if +* at all possible, ramping up to 128MB at 256GB. +*/ + logblocks =MIN (XFS_MIN_LOG_BYTES >> blocklog, + min_logblocks *XFS_DFL_LOG_FACTOR ); }else { - logblocks =MAX (logblocks, -MAX (XFS_DFL_LOG_SIZE , - min_logblocks *XFS_DFL_LOG_FACTOR )); +/* +* With a 2GB max log size, default to maximum size +* at 4TB. This keeps the same ratio from the older +* max log size of 128M at 256GB fs size. IOWs, +* the ratio of fs size to log size is 2048:1. +*/ + logblocks = (dblocks << blocklog) /2048 ; + logblocks = logblocks >> blocklog; + logblocks =MAX (min_logblocks, logblocks); } + +/* make sure the log fits wholly within an AG */ +if (logblocks >= agsize) + logblocks = min_logblocks; + +/* and now clamp the size to the maximum supported size */ logblocks =MIN (logblocks,XFS_MAX_LOG_BLOCKS ); -if ((logblocks << blocklog) >XFS_MAX_LOG_BYTES ) { +if ((logblocks << blocklog) >XFS_MAX_LOG_BYTES ) logblocks =XFS_MAX_LOG_BYTES >> blocklog; - } + }validate_log_size (logblocks, blocklog, min_logblocks);Signature · 6 lines
1.8.4.rc3 _______________________________________________ xfs mailing list [email protected] http://oss.sgi.com/mailman/listinfo/xfs
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
PATCH 2/2 mkfs: proto file creation does not set ftype correctly
In reply to Dave ChinnerFrom: Dave Chinner <[email protected]>
Hence running xfs_repair on a ftype enable filesystem that has contents created by a proto file will throw warnings on mismatched ftype entries and correct them. xfs/031 fails due to this problem.
Fix it by settin gup the xname structure with the correct type fields.
--- mkfs/proto.c | 8 ++++++++ 1 file changed, 8 insertions(+)
mkfs/proto.c +8 -0
@@ -438,6 +438,7 @@ parseproto( creds.cr_gid = (int )getnum (pp); xname.name = (uchar_t *)name; xname.len = name ?strlen (name) :0 ; + xname.type =0 ; tp =libxfs_trans_alloc (mp,0 ); flags =XFS_ILOG_CORE ;xfs_bmap_init (&flist, &first);
@@ -453,6 +454,7 @@ parseproto(if (buf)free (buf);libxfs_trans_ijoin (tp, pip,0 ); + xname.type =XFS_DIR3_FT_REG_FILE ;newdirent (mp, tp, pip, &xname, ip->i_ino, &first, &flist);libxfs_trans_ihold (tp, pip);break ;
@@ -469,6 +471,7 @@ parseproto(libxfs_trans_ijoin (tp, pip,0 ); + xname.type =XFS_DIR3_FT_REG_FILE ;newdirent (mp, tp, pip, &xname, ip->i_ino, &first, &flist);libxfs_trans_ihold (tp, pip);libxfs_trans_log_inode (tp, ip, flags);
@@ -490,6 +493,7 @@ parseproto(fail (_ ("Inode allocation failed" ), error); }libxfs_trans_ijoin (tp, pip,0 ); + xname.type =XFS_DIR3_FT_BLKDEV ;newdirent (mp, tp, pip, &xname, ip->i_ino, &first, &flist);libxfs_trans_ihold (tp, pip); flags |=XFS_ILOG_DEV ;
@@ -504,6 +508,7 @@ parseproto(if (error)fail (_ ("Inode allocation failed" ), error);libxfs_trans_ijoin (tp, pip,0 ); + xname.type =XFS_DIR3_FT_CHRDEV ;newdirent (mp, tp, pip, &xname, ip->i_ino, &first, &flist);libxfs_trans_ihold (tp, pip); flags |=XFS_ILOG_DEV ;
@@ -516,6 +521,7 @@ parseproto(if (error)fail (_ ("Inode allocation failed" ), error);libxfs_trans_ijoin (tp, pip,0 ); + xname.type =XFS_DIR3_FT_FIFO ;newdirent (mp, tp, pip, &xname, ip->i_ino, &first, &flist);libxfs_trans_ihold (tp, pip);break ;
@@ -529,6 +535,7 @@ parseproto(fail (_ ("Inode allocation failed" ), error); flags |=newfile (tp, ip, &flist, &first,1 ,1 , buf, len);libxfs_trans_ijoin (tp, pip,0 ); + xname.type =XFS_DIR3_FT_SYMLINK ;newdirent (mp, tp, pip, &xname, ip->i_ino, &first, &flist);libxfs_trans_ihold (tp, pip);break ;
@@ -546,6 +553,7 @@ parseproto( isroot =1 ; }else {libxfs_trans_ijoin (tp, pip,0 ); + xname.type =XFS_DIR3_FT_DIR ;newdirent (mp, tp, pip, &xname, ip->i_ino, &first, &flist); pip->i_d.di_nlink++;
Signature · 6 lines
1.8.4.rc3 _______________________________________________ xfs mailing list [email protected] http://oss.sgi.com/mailman/listinfo/xfs
Re: [PATCH 2/2] mkfs: proto file creation does not set ftype correctly
Quoted 7 lines · Dave Chinner
From: Dave Chinner <[email protected]>
Hence running
xfs_repairon a ftype enable filesystem that has contents created by a proto file will throw warnings on mismatched ftype entries and correct them. xfs/031 fails due to this problem.Fix it by settin gup the xname structure with the correct type
"setting up"
Quoted 3 lines
fields.
Signed-off-by Dave Chinner <[email protected]>
huh, surprised that hung out there for so long ;)
I guess the root inode is handled by core mkfs code, right? (around line 544)
And I notice that "r" filetypes aren't documented in the manpage but that's a different issue.
As long as I'm right about the root inode,
Quoted 66 lines
--- mkfs/proto.c | 8 ++++++++ 1 file changed, 8 insertions(+)mkfs/proto.c +7
-0@@ -438,6 +438,7 @@ parseproto( creds.cr_gid = (int )getnum (pp); xname.name = (uchar_t *)name; xname.len = name ?strlen (name) :0 ; + xname.type =0 ; tp =libxfs_trans_alloc (mp,0 ); flags =XFS_ILOG_CORE ;xfs_bmap_init (&flist, &first);@@ -453,6 +454,7 @@ parseproto(if (buf)free (buf);libxfs_trans_ijoin (tp, pip,0 ); + xname.type =XFS_DIR3_FT_REG_FILE ;newdirent (mp, tp, pip, &xname, ip->i_ino, &first, &flist);libxfs_trans_ihold (tp, pip);break ;@@ -469,6 +471,7 @@ parseproto(libxfs_trans_ijoin (tp, pip,0 ); + xname.type =XFS_DIR3_FT_REG_FILE ;newdirent (mp, tp, pip, &xname, ip->i_ino, &first, &flist);libxfs_trans_ihold (tp, pip);libxfs_trans_log_inode (tp, ip, flags);@@ -490,6 +493,7 @@ parseproto(fail (_ ("Inode allocation failed" ), error); }libxfs_trans_ijoin (tp, pip,0 ); + xname.type =XFS_DIR3_FT_BLKDEV ;newdirent (mp, tp, pip, &xname, ip->i_ino, &first, &flist);libxfs_trans_ihold (tp, pip); flags |=XFS_ILOG_DEV ;@@ -504,6 +508,7 @@ parseproto(if (error)fail (_ ("Inode allocation failed" ), error);libxfs_trans_ijoin (tp, pip,0 ); + xname.type =XFS_DIR3_FT_CHRDEV ;newdirent (mp, tp, pip, &xname, ip->i_ino, &first, &flist);libxfs_trans_ihold (tp, pip); flags |=XFS_ILOG_DEV ;@@ -516,6 +521,7 @@ parseproto(if (error)fail (_ ("Inode allocation failed" ), error);libxfs_trans_ijoin (tp, pip,0 ); + xname.type =XFS_DIR3_FT_FIFO ;newdirent (mp, tp, pip, &xname, ip->i_ino, &first, &flist);libxfs_trans_ihold (tp, pip);break ;@@ -529,6 +535,7 @@ parseproto(fail (_ ("Inode allocation failed" ), error); flags |=newfile (tp, ip, &flist, &first,1 ,1 , buf, len);libxfs_trans_ijoin (tp, pip,0 ); + xname.type =XFS_DIR3_FT_SYMLINK ;newdirent (mp, tp, pip, &xname, ip->i_ino, &first, &flist);libxfs_trans_ihold (tp, pip);break ;
mkfs/proto.c parseproto( · line 559
Quoted 7 lines
mkfs/proto.c +1
-0@@ -546,6 +553,7 @@ parseproto( isroot =1 ; }else {libxfs_trans_ijoin (tp, pip,0 ); + xname.type =XFS_DIR3_FT_DIR ;newdirent (mp, tp, pip, &xname, ip->i_ino, &first, &flist); pip->i_d.di_nlink++;
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Re: [PATCH 2/2] mkfs: proto file creation does not set ftype correctly
Quoted 9 lines · Eric Sandeen
Quoted 7 lines · Dave Chinner
From: Dave Chinner <[email protected]>
Hence running
xfs_repairon a ftype enable filesystem that has contents created by a proto file will throw warnings on mismatched ftype entries and correct them. xfs/031 fails due to this problem.Fix it by settin gup the xname structure with the correct type
Quoted 7 lines
"setting up"
Quoted 3 lines
fields.
Signed-off-by Dave Chinner <[email protected]>huh, surprised that hung out there for so long ;)
Just shows how long it took my backlog down far enough to deal with non-critical xfstests failures on CRC enabled filesystems...
Quoted 2 lines
I guess the root inode is handled by core mkfs code, right? (around line 544)
Yes - and the root inode is indexed in a directory (it's indexed by the superblock), so there's not ftype entry to be set up.
Quoted 2 lines
And I notice that "r" filetypes aren't documented in the manpage but that's a different issue.
Patch? ;)
Quoted 3 lines
As long as I'm right about the root inode,
Reviewed-by Eric Sandeen <[email protected]>
Cheers,
Dave.
Signature · 7 lines
Dave Chinner [email protected] _______________________________________________ xfs mailing list [email protected] http://oss.sgi.com/mailman/listinfo/xfs