Skip to contentSkip to conversation

Where are you going with 2.4.x?

DISCUSSION Andriy Korud 4 participants 7 messages Feb 11, 2001 – Feb 13, 2001

lore
Share & tools
lore
#0 lore raw

Hello all,
I'd like to post here me experience of using new Linux kernels both at home and on enterprise server.
At home I'm using new branch since 2.3.x - it works really fine for home work, multimedia, etc. Nice work, thanks.
But on our enterprise server It's something awful.
Server hardware is: PIII 500Mhz, Intel 440GX, 512 ECC RAM, 2xAdaptec 7xxx + Mylex AccelRAID 250 disk subsystem.
Server software is 2 instances of Oracle 8i (8.1.6 and 8.1.7). No kernel modules, no inet services, only Oracle.
On 2.2.x this run more or less stable (it usually crash or hang once per month, but it's acceptable).
I've installed 2.4.x there. Just immedualtely I've noticed performance improve, responce time improve.
BUT: All kernels prior to 2.1.4-ac8 hangs during first few hours of work on heavy disk (Mylex) activity.
2.1.4-ac8 was the first kernel which was able to work nore then 24 hours. But on 26'th our of work it crashed with:

       Kernel panic: Aiee:, killing interrupt handler!
       In interrupt handler - not syncing

So, again I've downgraded kernel to 2.2.18 again :(

Can I know your thoughts about target market of 2.4.x kernel? I assume that the goal is to make it feature-rich multimedia desktop system? Personally I now look how to run Oracle under FreeBSD which is much more stable on the same hardware at high load (corporate Squid).

Signature · 8 lines
Best regards,
 Andriy                          mailto:[email protected]


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
#1 lore raw
Quoted 2 lines

I've installed 2.4.x there. Just immedualtely I've noticed performance improve, responce time improve.

That is good news

Quoted 2 lines

BUT: All kernels prior to 2.1.4-ac8 hangs during first few hours of work on heavy disk (Mylex) activity.

Ok Im glad to know we have made some progress there

Quoted 5 lines

2.1.4-ac8 was the first kernel which was able to work nore then 24 hours. But on 26'th our of work it crashed with:

       Kernel panic: Aiee:, killing interrupt handler!
       In interrupt handler - not syncing

What is the oops data before the kernel panic. I need that to debug the driver. Also did you build the DAC960 support with gcc 2.96-x x<74 ?

Quoted 2 lines

Can I know your thoughts about target market of 2.4.x kernel? I assume that the goal is to make it feature-rich multimedia desktop system?

And a rock solid server and anything else people want it to be. -
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#2 lore raw

Alan> What is the oops data before the kernel panic. I need that to debug the Alan> driver. Also did you build the DAC960 support with gcc 2.96-x x<74 ? My system compiler is:
gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)
Shoud I upgrade it to gcc 2.95.x or 2.96.x?

And since my last post 2.4.1-ac8 crashed again with:
kswapd: Cannot dereference NULL pointer.

On the next crash I'll try write down all traces. BTW, is there some way to log it somewhere to file?

Signature · 8 lines
Best regards,
 Andriy                            mailto:[email protected]


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
#3 lore raw
Quoted 4 lines

Alan> driver. Also did you build the DAC960 support with gcc 2.96-x x<74 ? My system compiler is:

   gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)

Shoud I upgrade it to gcc 2.95.x or 2.96.x?

No that one is fine. I have a known problem with DAC960 and cvs gcc or gcc 2.96.x x<74 where struct sizes change and it doesnt work.

Quoted 2 lines

On the next crash I'll try write down all traces. BTW, is there some way to log it somewhere to file?

On a crash we don't log it to a file. The problem is that you cannot be sure of the state of the system so your logging might itself crash or do more harm.

The important bit is the EIP value and the call trace.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#4 lore raw
In reply to Alan Cox
Quoted 11 lines · Andriy Korud

Alan> What is the oops data before the kernel panic. I need that to debug the Alan> driver. Also did you build the DAC960 support with gcc 2.96-x x<74 ? My system compiler is:

   gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)

Shoud I upgrade it to gcc 2.95.x or 2.96.x?

And since my last post 2.4.1-ac8 crashed again with:
kswapd: Cannot dereference NULL pointer.

On the next crash I'll try write down all traces. BTW, is there some way to log it somewhere to file?

Considering this is an enterprise-server, you should have a serial-console to it; this will allow you to log all error-messages. Alternatively (not as nice, though), is to connect a printer to the parallel-port and use the parallelconsole option.

Then there's always the LKCD-patches, by SGI, if I'm not all wrong.

/David Weinehall
_ _
// David Weinehall <[email protected]> /> Northern lights wander \\

//  Project MCA Linux hacker        //  Dance across the winter sky //
\>  http://www.acc.umu.se/~tao/    </   Full colour fire           </

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#5 lore raw
In reply to Alan Cox
Quoted 4 lines · David Weinehall

Considering this is an enterprise-server, you should have a serial-console to it; this will allow you to log all error-messages. Alternatively (not as nice, though), is to connect a printer to the parallel-port and use the parallelconsole option.

I wrote I little palm app some time ago that can capture serial console output. If anyone is interested I'll build a tar ball with sources an binary.

regards Christian

Signature · 6 lines
THAT'S ALL FOLKS!
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://vger.kernel.org/lkml/
#6 lore raw

Serial Console and plam (was: Where are you going with 2.4.x?)

In reply to Alan Cox
Quoted 3 lines · On Mon, Feb 12, 2001 at 05:32:39PM +0100, I wrote:

I wrote a little palm app some time ago that can capture serial console output. If anyone is interested I'll build a tar ball with sources and binary.

It is now availiable at http://www.mathematik.uni-ulm.de/~ehrhardt/serial/

Sorry for the slightly off topic post but I think enough people showed interest to justify this.

regards Christian Ehrhardt

Signature · 1 line
THAT'S ALL FOLKS!