Skip to contentSkip to conversation

Add support for gluster backing store

PATCH Applied Dan Lambright 2 participants 2 messages Mar 14, 2014 – Mar 16, 2014 Kbuild

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 Add support for gluster backing store

Gluster is a distributed file system (www.gluster.org). The backing store gives block access protocols such as iSCSI access to data within gluster.

Gluster data resides on volumes which are physically located on servers. A "LUN" is represented by a file within a volume. To specify which file to use:

--bstype=glfs
--backing-store="volume@hostname:filename"

Optionally, logs may be specified. See README.glfs

All I/Os are synchronous. This is based off the rdrw and rbd backend storage drivers.

Fix stylistic errors

---
 Makefile        |   1 +
 doc/README.glfs |  50 +++++
 usr/Makefile    |   7 +
 usr/bs_glfs.c   | 558 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 616 insertions(+)
 create mode 100644 doc/README.glfs
 create mode 100644 usr/bs_glfs.c
Makefile +1 -0
index b74f4ae..5fb6cfa 100644
@@ -12,6 +12,7 @@ export VERSION PREFIX
 # Export the feature switches so sub-make knows about them
 export ISCSI_RDMA
 export CEPH_RBD
+export GLFS_BD
 
 .PHONY: all
 all: programs doc conf scripts
doc/README.glfs new file +50 -0

50 lines not on this page · raw message

usr/Makefile +7 -0
index e29826c..6234f3f 100644
@@ -17,6 +17,10 @@ ifneq ($(CEPH_RBD),)
 MODULES += bs_rbd.so
 endif
 
+ifneq ($(GLFS_BD),)
+MODULES += bs_glfs.so
+endif
+
 ifneq ($(shell test -e /usr/include/sys/eventfd.h && test -e /usr/include/libaio.h && echo 1),)
 CFLAGS += -DUSE_EVENTFD
 TGTD_OBJS += bs_aio.o
@@ -88,6 +92,9 @@ tgtimg: $(TGTIMG_OBJS)
 bs_rbd.so: bs_rbd.c
 	$(CC) -shared $(CFLAGS) bs_rbd.c -o bs_rbd.so -lrados -lrbd
 
+bs_glfs.so: bs_glfs.c
+	$(CC) -I/usr/include/glusterfs/api -shared $(CFLAGS) bs_glfs.c -o bs_glfs.so -lgfapi
+
 .PHONY: install
 install: $(PROGRAMS) $(MODULES)
 	install -d -m 755 $(DESTDIR)$(sbindir)
usr/bs_glfs.c new file +558 -0

558 lines not on this page · raw message

Signature · 1 line
1.8.5.3
#1 lore raw
Quoted 19 lines · On Fri, 14 Mar 2014 17:29:50 -0400 Dan Lambright <[email protected]> wrote:

Gluster is a distributed file system (www.gluster.org). The backing store gives block access protocols such as iSCSI access to data within gluster.

Gluster data resides on volumes which are physically located on servers. A "LUN" is represented by a file within a volume. To specify which file to use:

--bstype=glfs
--backing-store="volume@hostname:filename"

Optionally, logs may be specified. See README.glfs

All I/Os are synchronous. This is based off the rdrw and rbd backend storage drivers.

Fix stylistic errors

Quoted 8 lines
---
 Makefile        |   1 +
 doc/README.glfs |  50 +++++
 usr/Makefile    |   7 +
 usr/bs_glfs.c   | 558 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 616 insertions(+)
 create mode 100644 doc/README.glfs
 create mode 100644 usr/bs_glfs.c

Applied, thanks a lot!