tools, perf: Allow the user to disable time stamps
PATCH 1/1 tools, perf: Allow the user to disable time stamps
From: Andi Kleen <[email protected]>
[post with updated description]
Time stamps are always implicitely enabled for record currently. The old --time/-T option is a nop.
The time stamps are needed to handle library mmaps correctly. This mainly matters at program startup, but is not useful when profiling long running programs.
Allow the user to disable timestamps by using --no-time
This can cause some minor misaccounting, but lowers the size of the perf.data nicely:
% perl -e 'while(1) {}' &
[1] 5827
% perf record -p 5827 --no-time -c 1000003 sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.089 MB perf.data (~3872 samples) ] % perf record -p 5827 -c 1000003 sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.114 MB perf.data (~4967 samples) ]
22% smaller data file, even though we got more samples. It also seems to speed up perf slightly, that is why we get more samples.
The defaults are unchanged.
--- tools/perf/builtin-record.c | 1 + tools/perf/util/evsel.c | 9 ++++++--- 2 files changed, 7 insertions(+), 3 deletions(-)
tools/perf/builtin-record.c +1 -0
@@ -800,6 +800,7 @@ static const char * const record_usage[] = {*/ static struct record record = { .opts = { + .sample_time = true, .mmap_pages =UINT_MAX , .user_freq =UINT_MAX , .user_interval =ULLONG_MAX ,
tools/perf/util/evsel.c +6 -3
@@ -613,9 +613,12 @@ void perf_evsel__config(struct perf_evsel *evsel, struct record_opts *opts)if (opts->period)perf_evsel__set_sample_bit (evsel,PERIOD ); -if (!perf_missing_features.sample_id_all && - (opts->sample_time || !opts->no_inherit || -target__has_cpu (&opts->target) || per_cpu)) +/* +* When the user explicitely disabled time don't force it here. +*/ +if (opts->sample_time && + (!perf_missing_features.sample_id_all && + (!opts->no_inherit ||target__has_cpu (&opts->target) || per_cpu)))perf_evsel__set_sample_bit (evsel,TIME );if (opts->raw_samples) {
Signature · 1 line
1.8.5.3
Quoted 26 lines · Andi Kleen
From: Andi Kleen <[email protected]>
[post with updated description]
Time stamps are always implicitely enabled for record currently. The old --time/-T option is a nop.
The time stamps are needed to handle library mmaps correctly. This mainly matters at program startup, but is not useful when profiling long running programs.
Allow the user to disable timestamps by using --no-time
This can cause some minor misaccounting, but lowers the size of the perf.data nicely:
% perl -e 'while(1) {}' &
[1] 5827
% perf record -p 5827 --no-time -c 1000003 sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.089 MB perf.data (~3872 samples) ] % perf record -p 5827 -c 1000003 sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.114 MB perf.data (~4967 samples) ]
Quoted 4 lines
22% smaller data file, even though we got more samples. It also seems to speed up perf slightly, that is why we get more samples.
But that measure of the number of samples is bogus most of the time. It is an estimate based on a standard sample size.
Timestamp are useful to order samples during reporting. How do you do with it if you monitor multi-threaded (multi-cpu) workloads. This is only good for single thread or single CPU measurements. Or am I missing something?
Quoted 44 lines
The defaults are unchanged.
Signed-off-by Andi Kleen <[email protected]>--- tools/perf/builtin-record.c | 1 + tools/perf/util/evsel.c | 9 ++++++--- 2 files changed, 7 insertions(+), 3 deletions(-)tools/perf/builtin-record.c +1
-0@@ -800,6 +800,7 @@ static const char * const record_usage[] = {*/ static struct record record = { .opts = { + .sample_time = true, .mmap_pages =UINT_MAX , .user_freq =UINT_MAX , .user_interval =ULLONG_MAX ,tools/perf/util/evsel.c +6
-4@@ -613,9 +613,12 @@ void perf_evsel__config(struct perf_evsel *evsel, struct record_opts *opts)if (opts->period)perf_evsel__set_sample_bit (evsel,PERIOD ); -if (!perf_missing_features.sample_id_all && - (opts->sample_time || !opts->no_inherit || -target__has_cpu (&opts->target) || per_cpu)) +/* +* When the user explicitely disabled time don't force it here. +*/ +if (opts->sample_time && + (!perf_missing_features.sample_id_all && + (!opts->no_inherit ||target__has_cpu (&opts->target) || per_cpu)))perf_evsel__set_sample_bit (evsel,TIME );if (opts->raw_samples) { --1.8.5.3
Quoted 5 lines
Timestamp are useful to order samples during reporting. How do you do with it if you monitor multi-threaded (multi-cpu) workloads. This is only good for single thread or single CPU measurements. Or am I missing something?
For a perf report order doesn't matter (except against mmaps) The CPUs are still separated of course
You're right for some special analysis it matters, that is why it is only an option.
But for the standard "only care about perf report and don't care about about program startup" case it's a nice saving.
-Andi
Quoted 9 lines · Andi Kleen
Quoted 5 lines
Timestamp are useful to order samples during reporting. How do you do with it if you monitor multi-threaded (multi-cpu) workloads. This is only good for single thread or single CPU measurements. Or am I missing something?
For a perf report order doesn't matter (except against mmaps) The CPUs are still separated of course
But getting the mmaps at the right moment is crucial for some apps especially if address space is recycled otherwise symbolization may be incorrect.
Quoted 6 lines
You're right for some special analysis it matters, that is why it is only an option.
But for the standard "only care about perf report and don't care about about program startup" case it's a nice saving.
How do you know in advance you won't need mmap ordering?
Quoted 4 lines · Stephane Eranian
Quoted 1 line
But getting the mmaps at the right moment is crucial for some apps especially if address space is recycled otherwise symbolization may be incorrect.
Yes that is why it is only an option and not default. You need to know what you're doing.
BTW I think the recycle case is not very likely on non JIT.
Quoted 7 lines
Quoted 6 lines
You're right for some special analysis it matters, that is why it is only an option.
But for the standard "only care about perf report and don't care about about program startup" case it's a nice saving.
How do you know in advance you won't need mmap ordering?
When I measure a long running process and I know it doesn't fork/dlopen/jit. Using --initial-delay also helps to skip the startup phase or attaching later.
I believe it's actually a good choice for most non forky workloads. But yes it cannot be made default.
-Andi
Signature · 1 line
[email protected] -- Speaking for myself only
Also here's updated data with ls -lh. 24% saving here. The perf output is actually not that inaccurate for this case.
% perf record --no-time -c 100003 -p 10247 sleep 1
% ls -lh perf.data
-rw------- 1 ak users 681K Mar 25 14:04 perf.data
% perf record -c 100003 -p 10247 sleep 1
[ perf record: Woken up 4 times to write data ]
[ perf record: Captured and wrote 0.869 MB perf.data (~37982 samples) ] % ls -lh perf.data
-rw------- 1 ak users 893K Mar 25 14:04 perf.data
-Andi