Skip to contentSkip to conversation

Quake 3 demo

DISCUSSION [email protected] 2 participants 3 messages Jul 26, 2004 – Aug 2, 2004 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

Anyone tried to investigate why the Quake 3 demo doesn't work with ALSA?

I've tried running it directly, but it fails with :

------- sound initialization -------
/dev/dsp: Broken pipe
Could not toggle.

Then, when running with aoss I get this:

trFMV::play(), playing idlogo.RoQ
q3demo.x86: pcm.c:5957: snd_pcm_mmap_commit: Assertion `frames <= snd_pcm_mmap_avail(pcm)' failed. Received signal 6, exiting...

Any ideas?

Francisco

-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click

#1 lore raw

At Mon, 26 Jul 2004 19:44:23 -0400,

Quoted 9 lines · [email protected] wrote:

Anyone tried to investigate why the Quake 3 demo doesn't work with ALSA?

I've tried running it directly, but it fails with :

------- sound initialization -------
/dev/dsp: Broken pipe
Could not toggle.

Quoted 5 lines

Then, when running with aoss I get this:

trFMV::play(), playing idlogo.RoQ
q3demo.x86: pcm.c:5957: snd_pcm_mmap_commit: Assertion `frames <= snd_pcm_mmap_avail(pcm)' failed. Received signal 6, exiting...

Which driver?

assertion means some unexpected fatal sitution...

Takashi

-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com

#3 lore raw
In reply to a message not in the archive

At Fri, 30 Jul 2004 19:25:25 -0400,

Quoted 22 lines · Francisco Moraes
Quoted 6 lines · Takashi Iwai
Quoted 6 lines

------- sound initialization -------
/dev/dsp: Broken pipe
Could not toggle.

Then, when running with aoss I get this:

Quoted 10 lines
Quoted 5 lines

trFMV::play(), playing idlogo.RoQ
q3demo.x86: pcm.c:5957: snd_pcm_mmap_commit: Assertion `frames <= snd_pcm_mmap_avail(pcm)' failed. Received signal 6, exiting...

Which driver?

emu10k1x driver. I will do a strace level check when I test the driver again.

Quoted 6 lines
Quoted 3 lines

assertion means some unexpected fatal sitution...

I understand. It is just strange that the regular oss mapping doesn't work at all, fails with the broken pipe and then using aoss gives a different result.

EPIPE is a buffer XRUN, so the problem is likely in the driver.

Takashi

-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com