lpfc 10.2.8001.0: Fix ExpressLane priority setup

PATCH Superseded James Smart 1 participant 1 message May 21, 2014

Subsystems (2)

SCSI Emulex/Broadcom lpfc FC/FCoE SCSI driver

lore

Share & tools

lore

James Smart

author

2014-05-21 12:05 UTC #0 lore raw

PATCH v2 4/5 lpfc 10.2.8001.0: Fix ExpressLane priority setup

Fix ExpressLane priority setup

Signed-off-by James Smart <[email protected]>

---

 lpfc_attr.c |    2 +-
 lpfc_sli.c  |    1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

drivers/scsi/lpfc/lpfc_attr.c +1 -1

diff -upNr a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
@@ -4660,7 +4660,7 @@ LPFC_ATTR_R(EnableXLane, 0, 0, 1, "Enabl
 #       0x0 - 0x7f  = CS_CTL field in FC header (high 7 bits)
 # Value range is [0x0,0x7f]. Default value is 0
 */
-LPFC_ATTR_R(XLanePriority, 0, 0x0, 0x7f, "CS_CTL for Express Lane Feature.");
+LPFC_ATTR_RW(XLanePriority, 0, 0x0, 0x7f, "CS_CTL for Express Lane Feature.");
 
 /*
 # lpfc_enable_bg: Enable BlockGuard (Emulex's Implementation of T10-DIF)

drivers/scsi/lpfc/lpfc_sli.c +1 -0

diff -upNr a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
@@ -8187,6 +8187,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba
 	abort_tag = (uint32_t) iocbq->iotag;
 	xritag = iocbq->sli4_xritag;
 	wqe->generic.wqe_com.word7 = 0; /* The ct field has moved so reset */
+	wqe->generic.wqe_com.word10 = 0;
 	/* words0-2 bpl convert bde */
 	if (iocbq->iocb.un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) {
 		numBdes = iocbq->iocb.un.genreq64.bdl.bdeSize /