hwmon: (atxp1) Convert to devm_hwmon_device_register_with_groups
PATCH 1/1 hwmon: (atxp1) Convert to devm_hwmon_device_register_with_groups
Use ATTRIBUTE_GROUPS macro and devm_hwmon_device_register_with_groups. This simplifies the code a bit.
Also move atxp1_id and atxp1_driver to proper place to avoid forward declaration.
---
Hi,
I don't have the h/w to test, I'd appreciate if someone can review and test this patch.
Thanks,
Axel
drivers/hwmon/atxp1.c | 95 +++++++++++++++++---------------------------------- 1 file changed, 31 insertions(+), 64 deletions(-)
drivers/hwmon/atxp1.c +31 -64
@@ -45,32 +45,8 @@ MODULE_AUTHOR("Sebastian Witt <[email protected]>");static const unsigned short normal_i2c[] = {0x37 ,0x4e ,I2C_CLIENT_END }; -static int atxp1_probe (struct i2c_client *client, -const struct i2c_device_id *id); -static int atxp1_remove (struct i2c_client *client); -static struct atxp1_data *atxp1_update_device (struct device *dev); -static int atxp1_detect (struct i2c_client *client,struct i2c_board_info *info); - -static const struct i2c_device_id atxp1_id[] = { - {"atxp1" ,0 }, - { } -}; -MODULE_DEVICE_TABLE (i2c, atxp1_id); - -static struct i2c_driver atxp1_driver = { - .class =I2C_CLASS_HWMON , - .driver = { - .name ="atxp1" , - }, - .probe = atxp1_probe, - .remove = atxp1_remove, - .id_table = atxp1_id, - .detect = atxp1_detect, - .address_list = normal_i2c, -}; -struct atxp1_data { -struct device *hwmon_dev; +struct i2c_client *client;struct mutex update_lock;unsigned long last_updated;u8 valid;
@@ -85,11 +61,8 @@ struct atxp1_data {static struct atxp1_data *atxp1_update_device (struct device *dev) { -struct i2c_client *client; -struct atxp1_data *data; - - client =to_i2c_client (dev); - data =i2c_get_clientdata (client); +struct atxp1_data *data =dev_get_drvdata (dev); +struct i2c_client *client = data->client;mutex_lock (&data->update_lock);
@@ -284,17 +257,13 @@ static ssize_t atxp1_storegpio2(struct device *dev,*/ static DEVICE_ATTR(gpio2, S_IRUGO | S_IWUSR, atxp1_showgpio2, atxp1_storegpio2); -static struct attribute *atxp1_attributes[] = { +static struct attribute *atxp1_attrs[] = { &dev_attr_gpio1.attr, &dev_attr_gpio2.attr, &dev_attr_cpu0_vid.attr,NULL }; - -static const struct attribute_group atxp1_group = { - .attrs = atxp1_attributes, -}; - +ATTRIBUTE_GROUPS (atxp1);/* Return 0 if detection is successful, -ENODEV otherwise */ static int atxp1_detect(struct i2c_client *new_client,
@@ -338,52 +307,50 @@ static int atxp1_detect(struct i2c_client *new_client,return 0 ; } -static int atxp1_probe (struct i2c_client *new_client, +static int atxp1_probe (struct i2c_client *client,const struct i2c_device_id *id) { +struct device *dev = &client->dev;struct atxp1_data *data; -int err; +struct device *hwmon_dev; - data =devm_kzalloc (&new_client->dev,sizeof (struct atxp1_data ), -GFP_KERNEL ); + data =devm_kzalloc (dev,sizeof (struct atxp1_data ),GFP_KERNEL );if (!data)return -ENOMEM ;/* Get VRM */ data->vrm =vid_which_vrm (); -i2c_set_clientdata (new_client, data); + data->client = client;mutex_init (&data->update_lock); -/* Register sysfs hooks */ - err =sysfs_create_group (&new_client->dev.kobj, &atxp1_group); -if (err) -return err; + hwmon_dev =devm_hwmon_device_register_with_groups (dev, client->name, + data, + atxp1_groups); +if (IS_ERR (hwmon_dev)) +return PTR_ERR (hwmon_dev); - data->hwmon_dev =hwmon_device_register (&new_client->dev); -if (IS_ERR (data->hwmon_dev)) { - err =PTR_ERR (data->hwmon_dev); - goto exit_remove_files; - } - -dev_info (&new_client->dev,"Using VRM: %d.%d\n" , - data->vrm /10 , data->vrm %10 ); +dev_info (&client->dev,"Using VRM: %d.%d\n" , data->vrm /10 , + data->vrm %10 );return 0 ; - -exit_remove_files: -sysfs_remove_group (&new_client->dev.kobj, &atxp1_group); -return err; }; -static int atxp1_remove (struct i2c_client *client) -{ -struct atxp1_data *data =i2c_get_clientdata (client); - -hwmon_device_unregister (data->hwmon_dev); -sysfs_remove_group (&client->dev.kobj, &atxp1_group); +static const struct i2c_device_id atxp1_id[] = { + {"atxp1" ,0 }, + { } +}; +MODULE_DEVICE_TABLE (i2c, atxp1_id); -return 0 ; +static struct i2c_driver atxp1_driver = { + .class =I2C_CLASS_HWMON , + .driver = { + .name ="atxp1" , + }, + .probe = atxp1_probe, + .id_table = atxp1_id, + .detect = atxp1_detect, + .address_list = normal_i2c, };module_i2c_driver (atxp1_driver);
Signature · 9 lines
1.8.3.2 _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Guenter Roeck
maintainerQuoted 6 lines · Axel Lin
Use
ATTRIBUTE_GROUPSmacro anddevm_hwmon_device_register_with_groups. This simplifies the code a bit.Also move
atxp1_idandatxp1_driverto proper place to avoid forward declaration.
Please split this into two patches, one per logical change.
Content-wise, you missed the necessary changes in the store functions.
`client = to_i2c_client(dev);
no longer works. You have to get client from data->client. As a general guideline, any leftover to_2c_client() are wrong most of the time.
Quoted 117 lines
Signed-off-by Axel Lin <[email protected]>---
Hi,
I don't have the h/w to test, I'd appreciate if someone can review and test this patch.
Thanks,
Axeldrivers/hwmon/atxp1.c | 95 +++++++++++++++++---------------------------------- 1 file changed, 31 insertions(+), 64 deletions(-)drivers/hwmon/atxp1.c +15
-45@@ -45,32 +45,8 @@ MODULE_AUTHOR("Sebastian Witt <[email protected]>");static const unsigned short normal_i2c[] = {0x37 ,0x4e ,I2C_CLIENT_END }; -static int atxp1_probe (struct i2c_client *client, -const struct i2c_device_id *id); -static int atxp1_remove (struct i2c_client *client); -static struct atxp1_data *atxp1_update_device (struct device *dev); -static int atxp1_detect (struct i2c_client *client,struct i2c_board_info *info); - -static const struct i2c_device_id atxp1_id[] = { - {"atxp1" ,0 }, - { } -}; -MODULE_DEVICE_TABLE (i2c, atxp1_id); - -static struct i2c_driver atxp1_driver = { - .class =I2C_CLASS_HWMON , - .driver = { - .name ="atxp1" , - }, - .probe = atxp1_probe, - .remove = atxp1_remove, - .id_table = atxp1_id, - .detect = atxp1_detect, - .address_list = normal_i2c, -}; -struct atxp1_data { -struct device *hwmon_dev; +struct i2c_client *client;struct mutex update_lock;unsigned long last_updated;u8 valid;@@ -85,11 +61,8 @@ struct atxp1_data {static struct atxp1_data *atxp1_update_device (struct device *dev) { -struct i2c_client *client; -struct atxp1_data *data; - - client =to_i2c_client (dev); - data =i2c_get_clientdata (client); +struct atxp1_data *data =dev_get_drvdata (dev); +struct i2c_client *client = data->client;mutex_lock (&data->update_lock);@@ -284,17 +257,13 @@ static ssize_t atxp1_storegpio2(struct device *dev,*/ static DEVICE_ATTR(gpio2, S_IRUGO | S_IWUSR, atxp1_showgpio2, atxp1_storegpio2); -static struct attribute *atxp1_attributes[] = { +static struct attribute *atxp1_attrs[] = { &dev_attr_gpio1.attr, &dev_attr_gpio2.attr, &dev_attr_cpu0_vid.attr,NULL }; - -static const struct attribute_group atxp1_group = { - .attrs = atxp1_attributes, -}; - +ATTRIBUTE_GROUPS (atxp1);/* Return 0 if detection is successful, -ENODEV otherwise */ static int atxp1_detect(struct i2c_client *new_client,@@ -338,52 +307,50 @@ static int atxp1_detect(struct i2c_client *new_client,return 0 ; } -static int atxp1_probe (struct i2c_client *new_client, +static int atxp1_probe (struct i2c_client *client,const struct i2c_device_id *id) { +struct device *dev = &client->dev;struct atxp1_data *data; -int err; +struct device *hwmon_dev; - data =devm_kzalloc (&new_client->dev,sizeof (struct atxp1_data ), -GFP_KERNEL ); + data =devm_kzalloc (dev,sizeof (struct atxp1_data ),GFP_KERNEL );if (!data)return -ENOMEM ;/* Get VRM */ data->vrm =vid_which_vrm (); -i2c_set_clientdata (new_client, data); + data->client = client;mutex_init (&data->update_lock); -/* Register sysfs hooks */ - err =sysfs_create_group (&new_client->dev.kobj, &atxp1_group); -if (err) -return err; + hwmon_dev =devm_hwmon_device_register_with_groups (dev, client->name, + data, + atxp1_groups); +if (IS_ERR (hwmon_dev)) +return PTR_ERR (hwmon_dev);
drivers/hwmon/atxp1.c static int atxp1_detect(struct i2c_client *new_client, · line 333
Quoted 10 lines
drivers/hwmon/atxp1.c +1
-8- data->hwmon_dev =hwmon_device_register (&new_client->dev); -if (IS_ERR (data->hwmon_dev)) { - err =PTR_ERR (data->hwmon_dev); - goto exit_remove_files; - } - -dev_info (&new_client->dev,"Using VRM: %d.%d\n" , - data->vrm /10 , data->vrm %10 ); + dev_info(&client->dev, "Using VRM: %d.%d\n", data->vrm / 10,
Please use the newly introduced dev here.
Quoted 40 lines
drivers/hwmon/atxp1.c +15
-11+ data->vrm % 10);return 0 ; - -exit_remove_files: -sysfs_remove_group (&new_client->dev.kobj, &atxp1_group); -return err; }; -static int atxp1_remove (struct i2c_client *client) -{ -struct atxp1_data *data =i2c_get_clientdata (client); - -hwmon_device_unregister (data->hwmon_dev); -sysfs_remove_group (&client->dev.kobj, &atxp1_group); +static const struct i2c_device_id atxp1_id[] = { + {"atxp1" ,0 }, + { } +}; +MODULE_DEVICE_TABLE (i2c, atxp1_id); -return 0 ; +static struct i2c_driver atxp1_driver = { + .class =I2C_CLASS_HWMON , + .driver = { + .name ="atxp1" , + }, + .probe = atxp1_probe, + .id_table = atxp1_id, + .detect = atxp1_detect, + .address_list = normal_i2c, };module_i2c_driver (atxp1_driver);Signature · 1 line
1.8.3.2
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors