ucm: Document PlaybackPCMIsDummy and CapturePCMIsDummy values
PATCH 1/1 ucm: Document PlaybackPCMIsDummy and CapturePCMIsDummy values
At least PulseAudio needs special handling for dummy devices. To allow that to happen automatically, the UCM configuration should contain the information about which PCMs are dummy.
Signed-off-by Tanu Kaskinen <[email protected]>
--- include/use-case.h | 10 ++++++++++ 1 file changed, 10 insertions(+)
include/use-case.h +10 -0
@@ -258,7 +258,17 @@ int snd_use_case_get_list(snd_use_case_mgr_t *uc_mgr,* Recommended names for values: * TQ - Tone Quality * PlaybackPCM - full PCM playback device name +* PlaybackPCMIsDummy - Valid values: "yes" and "no". If set to "yes", the +* PCM named by the PlaybackPCM value is a dummy device, +* meaning that opening it enables an audio path in the +* hardware, but writing to the PCM device has no +* effect. * CapturePCM - full PCM capture device name +* CapturePCMIsDummy - Valid values: "yes" and "no". If set to "yes", the +* PCM named by the CapturePCM value is a dummy device, +* meaning that opening it enables an audio path in the +* hardware, but reading from the PCM device has no +* effect. * PlaybackRate - playback device sample rate * PlaybackChannels - playback device channel count * PlaybackCTL - playback control device name
Signature · 1 line
1.9.3
Quoted 5 lines · Tanu Kaskinen
At least PulseAudio needs special handling for dummy devices. To allow that to happen automatically, the UCM configuration should contain the information about which PCMs are dummy.
Signed-off-by Tanu Kaskinen <[email protected]>
Acked-by Liam Girdwood <[email protected]>
Takashi Iwai
AppliedAt Thu, 26 Jun 2014 13:30:25 +0300,
Quoted 6 lines · Tanu Kaskinen
At least PulseAudio needs special handling for dummy devices. To allow that to happen automatically, the UCM configuration should contain the information about which PCMs are dummy.
Signed-off-by Tanu Kaskinen <[email protected]>
Thanks, applied with Liam's ack.
Takashi
Quoted 34 lines
--- include/use-case.h | 10 ++++++++++ 1 file changed, 10 insertions(+)include/use-case.h +10
-0@@ -258,7 +258,17 @@ int snd_use_case_get_list(snd_use_case_mgr_t *uc_mgr,* Recommended names for values: * TQ - Tone Quality * PlaybackPCM - full PCM playback device name +* PlaybackPCMIsDummy - Valid values: "yes" and "no". If set to "yes", the +* PCM named by the PlaybackPCM value is a dummy device, +* meaning that opening it enables an audio path in the +* hardware, but writing to the PCM device has no +* effect. * CapturePCM - full PCM capture device name +* CapturePCMIsDummy - Valid values: "yes" and "no". If set to "yes", the +* PCM named by the CapturePCM value is a dummy device, +* meaning that opening it enables an audio path in the +* hardware, but reading from the PCM device has no +* effect. * PlaybackRate - playback device sample rate * PlaybackChannels - playback device channel count * PlaybackCTL - playback control device name Signature · 6 lines
1.9.3 _______________________________________________ Alsa-devel mailing list [email protected] http://mailman.alsa-project.org/mailman/listinfo/alsa-devel