USB: ehci-pci: USB host controller support for Intel Quark X1000
Subsystems (2)
PATCH v5 1/1 USB: ehci-pci: USB host controller support for Intel Quark X1000
From: Bryan O'Donoghue <[email protected]>
The EHCI packet buffer in/out threshold is programmable for Intel Quark X1000 USB host controller, and the default value is 0x20 dwords. The in/out threshold can be programmed to 0x80 dwords (512 Bytes) to maximize the perfomrance, but only when isochronous/interrupt transactions are not initiated by the USB host controller. This patch is to reconfigure the packet buffer in/out threshold as maximal as possible to maximize the performance, and 0x7F dwords (508 Bytes) should be used because the USB host controller initiates isochronous/interrupt transactions.
---
Changlog v5:
* Correct the wrong comment style.
drivers/usb/host/ehci-pci.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
drivers/usb/host/ehci-pci.c +25 -0
@@ -35,6 +35,21 @@ static const char hcd_name[] = "ehci-pci";#define PCI_DEVICE_ID_INTEL_CE4100_USB 0x2e70/*-------------------------------------------------------------------------*/ +#define PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC 0x0939 +static inline bool is_intel_quark_x1000 (struct pci_dev *pdev) +{ +return pdev->vendor ==PCI_VENDOR_ID_INTEL && + pdev->device ==PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC ; +} + +/* +* 0x84 is the offset of in/out threshold register, +* and it is the same offset as the register of 'hostpc'. +*/ +#define intel_quark_x1000_insnreg01 hostpc + +/* Maximum usable threshold value is 0x7f dwords for both IN and OUT */ +#define INTEL_QUARK_X1000_EHCI_MAX_THRESHOLD 0x007f007f/* called after powerup, by probe or system-pm "wakeup" */ static int ehci_pci_reinit (struct ehci_hcd *ehci,struct pci_dev *pdev)
@@ -50,6 +65,16 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)if (!retval)ehci_dbg (ehci,"MWI active\n" ); +/* Reset the threshold limit */ +if (is_intel_quark_x1000 (pdev)) { +/* +* For the Intel QUARK X1000, raise the I/O threshold to the +* maximum usable value in order to improve performance. +*/ +ehci_writel (ehci,INTEL_QUARK_X1000_EHCI_MAX_THRESHOLD , + ehci->regs->intel_quark_x1000_insnreg01); + } +return 0 ; }
Signature · 1 line
1.7.9.5
Greg Kroah-Hartman
maintainerQuoted 15 lines · Alvin
From: Bryan O'Donoghue <[email protected]>
The EHCI packet buffer in/out threshold is programmable for Intel Quark X1000 USB host controller, and the default value is
0x20dwords. The in/out threshold can be programmed to0x80dwords (512 Bytes) to maximize the perfomrance, but only when isochronous/interrupt transactions are not initiated by the USB host controller. This patch is to reconfigure the packet buffer in/out threshold as maximal as possible to maximize the performance, and0x7Fdwords (508 Bytes) should be used because the USB host controller initiates isochronous/interrupt transactions.Signed-off-by Bryan O'Donoghue <[email protected]>Signed-off-by Alvin (Weike) Chen <[email protected]>Acked-by Alan Stern <[email protected]>Reviewed-by Jingoo Han <[email protected]>
Quoted 6 lines
---
Changlog v5:
* Correct the wrong comment style.drivers/usb/host/ehci-pci.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+)
This should go to stable kernel releases as well, right?
thanks,
greg k-h