Skip to contentSkip to conversation

regulator: arizona-ldo1: remove bypass functionality

PATCH Superseded Nikesh Oswal 2 participants 2 messages Jul 3, 2014

Subsystems (2)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 regulator: arizona-ldo1: remove bypass functionality

From: Nikesh Oswal <[email protected]>

WM5110/8280 devices do not support bypass mode for LDO1 so remove the bypass callbacks registered with regulator core.

---
 drivers/regulator/arizona-ldo1.c |    2 --
 1 file changed, 2 deletions(-)
drivers/regulator/arizona-ldo1.c +0 -2
index 04f262a..4c9db58 100644
@@ -143,8 +143,6 @@ static struct regulator_ops arizona_ldo1_ops = {
 	.map_voltage = regulator_map_voltage_linear,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
-	.get_bypass = regulator_get_bypass_regmap,
-	.set_bypass = regulator_set_bypass_regmap,
 };
 
 static const struct regulator_desc arizona_ldo1 = {
Signature · 1 line
1.7.9.5
maintainer
#1 lore raw
Quoted 6 lines · Nikesh Oswal

From: Nikesh Oswal <[email protected]>

WM5110/8280 devices do not support bypass mode for LDO1 so remove the bypass callbacks registered with regulator core.

Please fix your configuration so that these two line up, it raises red flags that they don't even though it's fairly clear that they're most likely both for the same person.

I'd recommend not using your corporate mail for community work since if you reply from it and get a mail footer added (as is standard) people will tend not to respond positively.