Skip to contentSkip to conversation

SNB runtime PM fixes

PATCH In review Paulo Zanoni 3 participants 10 messages Jul 4, 2014 – Jul 10, 2014

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover SNB runtime PM fixes

From: Paulo Zanoni <[email protected]>

Hi

When I originally wrote and tested SNB runtime PM it was working without any errors, then I sent the patches to the mailing list and we ended up discarding one of the patches that was needed. We ended up replacing that patch with a few patches that only plugged the HSW holes, leaving SNB runtime PM broken since then. Since I never got any bug report about this, I assumed SNB runtime PM was working and didn't test things again... Then a long time later we got the bug reports, and now we have fixes :)

Also notice that patch 1 was also sent as part of the "Runtime PM on DPMS on HSW" series, so it's duplicated.

Thanks,
Paulo

Paulo Zanoni (4):
drm/i915: add POWER_DOMAIN_PLLS
drm/i915: check the power domains in ironlake_get_pipe_config() drm/i915: check the power domains in intel_lvds_get_hw_state() drm/i915: don't read LVDS regs at compute_config time

 drivers/gpu/drm/i915/i915_debugfs.c  |  2 ++
 drivers/gpu/drm/i915/i915_drv.h      |  1 +
 drivers/gpu/drm/i915/intel_display.c | 14 ++++++++++++++
 drivers/gpu/drm/i915/intel_lvds.c    | 18 ++++++++++++++----
 drivers/gpu/drm/i915/intel_pm.c      |  1 +
 5 files changed, 32 insertions(+), 4 deletions(-)
Signature · 1 line
2.0.0
#1 lore raw

PATCH 1/4 drm/i915: add POWER_DOMAIN_PLLS

From: Paulo Zanoni <[email protected]>

And get/put it when needed. The special thing about this commit is that it will now return false in ibx_pch_dpll_get_hw_state() in case the power domain is not enabled. This will fix some WARNs we have when we run pm_rpm on SNB.

Testcase: igt/pm_rpm Bugzilla:https://bugs.freedesktop.org/show_bug.cgi?id=80463

---
 drivers/gpu/drm/i915/i915_debugfs.c  |  2 ++
 drivers/gpu/drm/i915/i915_drv.h      |  1 +
 drivers/gpu/drm/i915/intel_display.c | 10 ++++++++++
 drivers/gpu/drm/i915/intel_pm.c      |  1 +
 4 files changed, 14 insertions(+)
drivers/gpu/drm/i915/i915_debugfs.c +2 -0
index 8da9985..18d4f9e 100644
@@ -2134,6 +2134,8 @@ static const char *power_domain_str(enum intel_display_power_domain domain)
 		return "VGA";
 	case POWER_DOMAIN_AUDIO:
 		return "AUDIO";
+	case POWER_DOMAIN_PLLS:
+		return "PLLS";
 	case POWER_DOMAIN_INIT:
 		return "INIT";
 	default:
drivers/gpu/drm/i915/i915_drv.h +1 -0
index ac06c0f..1cc1b8f 100644
@@ -129,6 +129,7 @@ enum intel_display_power_domain {
 	POWER_DOMAIN_PORT_OTHER,
 	POWER_DOMAIN_VGA,
 	POWER_DOMAIN_AUDIO,
+	POWER_DOMAIN_PLLS,
 	POWER_DOMAIN_INIT,
 
 	POWER_DOMAIN_NUM,
drivers/gpu/drm/i915/intel_display.c +10 -0
index c12a5da..3d69097 100644
@@ -1837,6 +1837,8 @@ static void intel_enable_shared_dpll(struct intel_crtc *crtc)
 	}
 	WARN_ON(pll->on);
 
+	intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
+
 	DRM_DEBUG_KMS("enabling %s\n", pll->name);
 	pll->enable(dev_priv, pll);
 	pll->on = true;
@@ -1873,6 +1875,8 @@ static void intel_disable_shared_dpll(struct intel_crtc *crtc)
 	DRM_DEBUG_KMS("disabling %s\n", pll->name);
 	pll->disable(dev_priv, pll);
 	pll->on = false;
+
+	intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS);
 }
 
 static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
@@ -11280,6 +11284,9 @@ static bool ibx_pch_dpll_get_hw_state(struct drm_i915_private *dev_priv,
 {
 	uint32_t val;
 
+	if (!intel_display_power_enabled(dev_priv, POWER_DOMAIN_PLLS))
+		return false;
+
 	val = I915_READ(PCH_DPLL(pll->id));
 	hw_state->dpll = val;
 	hw_state->fp0 = I915_READ(PCH_FP0(pll->id));
@@ -12845,6 +12852,9 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 
 		DRM_DEBUG_KMS("%s hw state readout: refcount %i, on %i\n",
 			      pll->name, pll->refcount, pll->on);
+
+		if (pll->refcount)
+			intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
 	}
 
 	list_for_each_entry(encoder, &dev->mode_config.encoder_list,
drivers/gpu/drm/i915/intel_pm.c +1 -0
index 31ae2b4..cf4c521 100644
@@ -6310,6 +6310,7 @@ EXPORT_SYMBOL_GPL(i915_release_power_well);
 	BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) |		\
 	BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) |		\
 	BIT(POWER_DOMAIN_PORT_CRT) |			\
+	BIT(POWER_DOMAIN_PLLS) |			\
 	BIT(POWER_DOMAIN_INIT))
 #define HSW_DISPLAY_POWER_DOMAINS (				\
 	(POWER_DOMAIN_MASK & ~HSW_ALWAYS_ON_POWER_DOMAINS) |	\
Signature · 1 line
2.0.0
#3 lore raw

PATCH 2/4 drm/i915: check the power domains in ironlake_get_pipe_config()

In reply to Paulo Zanoni

From: Paulo Zanoni <[email protected]>

Just like we already do in haswell_get_pipe_config(). This should prevent some WARNs when we run pm_rpm on SNB.

Testcase: igt/pm_rpm
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80463

---
 drivers/gpu/drm/i915/intel_display.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/gpu/drm/i915/intel_display.c +4 -0
index 3d69097..0e6217a 100644
@@ -7261,6 +7261,10 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t tmp;
 
+	if (!intel_display_power_enabled(dev_priv,
+					 POWER_DOMAIN_PIPE(crtc->pipe)))
+		return false;
+
 	pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
 	pipe_config->shared_dpll = DPLL_ID_PRIVATE;
 
Signature · 1 line
2.0.0
#5 lore raw

PATCH 3/4 drm/i915: check the power domains in intel_lvds_get_hw_state()

In reply to Paulo Zanoni

From: Paulo Zanoni <[email protected]>

Just like we do for the other encoders. This should fix some WARNs when running pm_rpm on SNB.

Testcase: igt/pm_rpm
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80463

---
 drivers/gpu/drm/i915/intel_lvds.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/i915/intel_lvds.c +5 -0
index 4d29a83..8aa7973 100644
@@ -71,8 +71,13 @@ static bool intel_lvds_get_hw_state(struct intel_encoder *encoder,
 	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
+	enum intel_display_power_domain power_domain;
 	u32 tmp;
 
+	power_domain = intel_display_port_power_domain(encoder);
+	if (!intel_display_power_enabled(dev_priv, power_domain))
+		return false;
+
 	tmp = I915_READ(lvds_encoder->reg);
 
 	if (!(tmp & LVDS_PORT_EN))
Signature · 1 line
2.0.0
#7 lore raw

PATCH 4/4 drm/i915: don't read LVDS regs at compute_config time

In reply to Paulo Zanoni

From: Paulo Zanoni <[email protected]>

We may reach this point while the machine is still runtime suspended, so we'll hit a WARN. The other encoders also don't touch registers at this point, so instead of waking the machine up, write some code to keep the register always at the same state, including after we runtime suspend/resume.

Testcase: igt/pm_rpm
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80463

---
 drivers/gpu/drm/i915/intel_lvds.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/intel_lvds.c +9 -4
index 8aa7973..c511287 100644
@@ -51,6 +51,7 @@ struct intel_lvds_encoder {
 
 	bool is_dual_link;
 	u32 reg;
+	u32 a3_power;
 
 	struct intel_lvds_connector *attached_connector;
 };
@@ -170,8 +171,11 @@ static void intel_pre_enable_lvds(struct intel_encoder *encoder)
 
 	/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
 	 * appropriately here, but we need to look more thoroughly into how
-	 * panels behave in the two modes.
+	 * panels behave in the two modes. For now, let's just maintain the
+	 * value we got from the BIOS.
 	 */
+	 temp &= ~LVDS_A3_POWER_MASK;
+	 temp |= lvds_encoder->a3_power;
 
 	/* Set the dithering flag on LVDS as needed, note that there is no
 	 * special lvds dither control bit on pch-split platforms, dithering is
@@ -269,7 +273,6 @@ static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder,
 				      struct intel_crtc_config *pipe_config)
 {
 	struct drm_device *dev = intel_encoder->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_lvds_encoder *lvds_encoder =
 		to_lvds_encoder(&intel_encoder->base);
 	struct intel_connector *intel_connector =
@@ -284,8 +287,7 @@ static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder,
 		return false;
 	}
 
-	if ((I915_READ(lvds_encoder->reg) & LVDS_A3_POWER_MASK) ==
-	    LVDS_A3_POWER_UP)
+	if (lvds_encoder->a3_power == LVDS_A3_POWER_UP)
 		lvds_bpp = 8*3;
 	else
 		lvds_bpp = 6*3;
@@ -1086,6 +1088,9 @@ out:
 	DRM_DEBUG_KMS("detected %s-link lvds configuration\n",
 		      lvds_encoder->is_dual_link ? "dual" : "single");
 
+	lvds_encoder->a3_power = I915_READ(lvds_encoder->reg) &
+				 LVDS_A3_POWER_MASK;
+
 	/*
 	 * Unlock registers and just
 	 * leave them unlocked
Signature · 1 line
2.0.0
Reviewed-by on v1 1/4
#2 lore raw

Re: [PATCH 1/4] drm/i915: add POWER_DOMAIN_PLLS

In reply to Paulo Zanoni
Quoted 10 lines · Paulo Zanoni

From: Paulo Zanoni <[email protected]>

And get/put it when needed. The special thing about this commit is that it will now return false in ibx_pch_dpll_get_hw_state() in case the power domain is not enabled. This will fix some WARNs we have when we run pm_rpm on SNB.

Testcase: igt/pm_rpm Bugzilla:https://bugs.freedesktop.org/show_bug.cgi?id=80463

Signature · 1 line
Damien
Quoted 93 lines
---
 drivers/gpu/drm/i915/i915_debugfs.c  |  2 ++
 drivers/gpu/drm/i915/i915_drv.h      |  1 +
 drivers/gpu/drm/i915/intel_display.c | 10 ++++++++++
 drivers/gpu/drm/i915/intel_pm.c      |  1 +
 4 files changed, 14 insertions(+)
drivers/gpu/drm/i915/i915_debugfs.c +2 -0
index 8da9985..18d4f9e 100644
@@ -2134,6 +2134,8 @@ static const char *power_domain_str(enum intel_display_power_domain domain)
 		return "VGA";
 	case POWER_DOMAIN_AUDIO:
 		return "AUDIO";
+	case POWER_DOMAIN_PLLS:
+		return "PLLS";
 	case POWER_DOMAIN_INIT:
 		return "INIT";
 	default:
drivers/gpu/drm/i915/i915_drv.h +1 -0
index ac06c0f..1cc1b8f 100644
@@ -129,6 +129,7 @@ enum intel_display_power_domain {
 	POWER_DOMAIN_PORT_OTHER,
 	POWER_DOMAIN_VGA,
 	POWER_DOMAIN_AUDIO,
+	POWER_DOMAIN_PLLS,
 	POWER_DOMAIN_INIT,
 
 	POWER_DOMAIN_NUM,
drivers/gpu/drm/i915/intel_display.c +10 -0
index c12a5da..3d69097 100644
@@ -1837,6 +1837,8 @@ static void intel_enable_shared_dpll(struct intel_crtc *crtc)
 	}
 	WARN_ON(pll->on);
 
+	intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
+
 	DRM_DEBUG_KMS("enabling %s\n", pll->name);
 	pll->enable(dev_priv, pll);
 	pll->on = true;
@@ -1873,6 +1875,8 @@ static void intel_disable_shared_dpll(struct intel_crtc *crtc)
 	DRM_DEBUG_KMS("disabling %s\n", pll->name);
 	pll->disable(dev_priv, pll);
 	pll->on = false;
+
+	intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS);
 }
 
 static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
@@ -11280,6 +11284,9 @@ static bool ibx_pch_dpll_get_hw_state(struct drm_i915_private *dev_priv,
 {
 	uint32_t val;
 
+	if (!intel_display_power_enabled(dev_priv, POWER_DOMAIN_PLLS))
+		return false;
+
 	val = I915_READ(PCH_DPLL(pll->id));
 	hw_state->dpll = val;
 	hw_state->fp0 = I915_READ(PCH_FP0(pll->id));
@@ -12845,6 +12852,9 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 
 		DRM_DEBUG_KMS("%s hw state readout: refcount %i, on %i\n",
 			      pll->name, pll->refcount, pll->on);
+
+		if (pll->refcount)
+			intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS);
 	}
 
 	list_for_each_entry(encoder, &dev->mode_config.encoder_list,
drivers/gpu/drm/i915/intel_pm.c +1 -0
index 31ae2b4..cf4c521 100644
@@ -6310,6 +6310,7 @@ EXPORT_SYMBOL_GPL(i915_release_power_well);
 	BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) |		\
 	BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) |		\
 	BIT(POWER_DOMAIN_PORT_CRT) |			\
+	BIT(POWER_DOMAIN_PLLS) |			\
 	BIT(POWER_DOMAIN_INIT))
 #define HSW_DISPLAY_POWER_DOMAINS (				\
 	(POWER_DOMAIN_MASK & ~HSW_ALWAYS_ON_POWER_DOMAINS) |	\
Signature · 6 lines
2.0.0

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v1 2/4
#4 lore raw

Re: [PATCH 2/4] drm/i915: check the power domains in ironlake_get_pipe_config()

In reply to Paulo Zanoni
Quoted 8 lines · Paulo Zanoni

From: Paulo Zanoni <[email protected]>

Just like we already do in haswell_get_pipe_config(). This should prevent some WARNs when we run pm_rpm on SNB.

Testcase: igt/pm_rpm
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80463

Signature · 1 line
Damien
Quoted 26 lines
---
 drivers/gpu/drm/i915/intel_display.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/gpu/drm/i915/intel_display.c +4 -0
index 3d69097..0e6217a 100644
@@ -7261,6 +7261,10 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t tmp;
 
+	if (!intel_display_power_enabled(dev_priv,
+					 POWER_DOMAIN_PIPE(crtc->pipe)))
+		return false;
+
 	pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
 	pipe_config->shared_dpll = DPLL_ID_PRIVATE;
 
Signature · 6 lines
2.0.0

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v1 3/4
#6 lore raw

Re: [PATCH 3/4] drm/i915: check the power domains in intel_lvds_get_hw_state()

In reply to Paulo Zanoni
Quoted 8 lines · Paulo Zanoni

From: Paulo Zanoni <[email protected]>

Just like we do for the other encoders. This should fix some WARNs when running pm_rpm on SNB.

Testcase: igt/pm_rpm
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80463

Signature · 1 line
Damien
Quoted 29 lines
---
 drivers/gpu/drm/i915/intel_lvds.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/gpu/drm/i915/intel_lvds.c +5 -0
index 4d29a83..8aa7973 100644
@@ -71,8 +71,13 @@ static bool intel_lvds_get_hw_state(struct intel_encoder *encoder,
 	struct drm_device *dev = encoder->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
+	enum intel_display_power_domain power_domain;
 	u32 tmp;
 
+	power_domain = intel_display_port_power_domain(encoder);
+	if (!intel_display_power_enabled(dev_priv, power_domain))
+		return false;
+
 	tmp = I915_READ(lvds_encoder->reg);
 
 	if (!(tmp & LVDS_PORT_EN))
Signature · 6 lines
2.0.0

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v1 4/4
#8 lore raw

Re: [PATCH 4/4] drm/i915: don't read LVDS regs at compute_config time

In reply to Paulo Zanoni
Quoted 11 lines · Paulo Zanoni

From: Paulo Zanoni <[email protected]>

We may reach this point while the machine is still runtime suspended, so we'll hit a WARN. The other encoders also don't touch registers at this point, so instead of waking the machine up, write some code to keep the register always at the same state, including after we runtime suspend/resume.

Testcase: igt/pm_rpm
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80463

I would store lvds_bpp directly in the encoder structure, have the logic around A3 power in the _init() function and don't bother re-writing the A3,B3 control. But anyway, this looks correct to me.

Signature · 1 line
Damien
Quoted 17 lines
---
 drivers/gpu/drm/i915/intel_lvds.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/intel_lvds.c +1 -0
index 8aa7973..c511287 100644
@@ -51,6 +51,7 @@ struct intel_lvds_encoder {
 
 	bool is_dual_link;
 	u32 reg;
+	u32 a3_power;
 
 	struct intel_lvds_connector *attached_connector;
 };

drivers/gpu/drm/i915/intel_lvds.c static void intel_pre_enable_lvds(struct intel_encoder *encoder) · line 178

Quoted 9 lines
drivers/gpu/drm/i915/intel_lvds.c +4 -1
@@ -170,8 +171,11 @@ static void intel_pre_enable_lvds(struct intel_encoder *encoder)
 
 	/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
 	 * appropriately here, but we need to look more thoroughly into how
-	 * panels behave in the two modes.
+	 * panels behave in the two modes. For now, let's just maintain the
+	 * value we got from the BIOS.
 	 */
+	 temp &= ~LVDS_A3_POWER_MASK;
+	 temp |= lvds_encoder->a3_power;

I guess we actually don't need this as we'll be just preserving what we read earlier.

Quoted 38 lines
drivers/gpu/drm/i915/intel_lvds.c +4 -3
 	/* Set the dithering flag on LVDS as needed, note that there is no
 	 * special lvds dither control bit on pch-split platforms, dithering is
@@ -269,7 +273,6 @@ static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder,
 				      struct intel_crtc_config *pipe_config)
 {
 	struct drm_device *dev = intel_encoder->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_lvds_encoder *lvds_encoder =
 		to_lvds_encoder(&intel_encoder->base);
 	struct intel_connector *intel_connector =
@@ -284,8 +287,7 @@ static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder,
 		return false;
 	}
 
-	if ((I915_READ(lvds_encoder->reg) & LVDS_A3_POWER_MASK) ==
-	    LVDS_A3_POWER_UP)
+	if (lvds_encoder->a3_power == LVDS_A3_POWER_UP)
 		lvds_bpp = 8*3;
 	else
 		lvds_bpp = 6*3;
@@ -1086,6 +1088,9 @@ out:
 	DRM_DEBUG_KMS("detected %s-link lvds configuration\n",
 		      lvds_encoder->is_dual_link ? "dual" : "single");
 
+	lvds_encoder->a3_power = I915_READ(lvds_encoder->reg) &
+				 LVDS_A3_POWER_MASK;
+
 	/*
 	 * Unlock registers and just
 	 * leave them unlocked
Signature · 6 lines
2.0.0

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#9 lore raw

Re: [PATCH 4/4] drm/i915: don't read LVDS regs at compute_config time

In reply to Paulo Zanoni
Quoted 7 lines · Paulo Zanoni

From: Paulo Zanoni <[email protected]>

We may reach this point while the machine is still runtime suspended, so we'll hit a WARN. The other encoders also don't touch registers at this point, so instead of waking the machine up, write some code to keep the register always at the same state, including after we runtime suspend/resume.

Excellent catch - we really don't want to touch the hw at all in the compute stage: Once we have atomic modeset we run this code for the test-only mode when userspace tries to figure out what's possible. Waking up the hardware here is really not what we want to do.

Quoted 3 lines

Testcase: igt/pm_rpm
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80463

Entire series pulled into dinq, thanks.
-Daniel

Quoted 64 lines
---
 drivers/gpu/drm/i915/intel_lvds.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/intel_lvds.c +9 -4
index 8aa7973..c511287 100644
@@ -51,6 +51,7 @@ struct intel_lvds_encoder {
 
 	bool is_dual_link;
 	u32 reg;
+	u32 a3_power;
 
 	struct intel_lvds_connector *attached_connector;
 };
@@ -170,8 +171,11 @@ static void intel_pre_enable_lvds(struct intel_encoder *encoder)
 
 	/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
 	 * appropriately here, but we need to look more thoroughly into how
-	 * panels behave in the two modes.
+	 * panels behave in the two modes. For now, let's just maintain the
+	 * value we got from the BIOS.
 	 */
+	 temp &= ~LVDS_A3_POWER_MASK;
+	 temp |= lvds_encoder->a3_power;
 
 	/* Set the dithering flag on LVDS as needed, note that there is no
 	 * special lvds dither control bit on pch-split platforms, dithering is
@@ -269,7 +273,6 @@ static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder,
 				      struct intel_crtc_config *pipe_config)
 {
 	struct drm_device *dev = intel_encoder->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_lvds_encoder *lvds_encoder =
 		to_lvds_encoder(&intel_encoder->base);
 	struct intel_connector *intel_connector =
@@ -284,8 +287,7 @@ static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder,
 		return false;
 	}
 
-	if ((I915_READ(lvds_encoder->reg) & LVDS_A3_POWER_MASK) ==
-	    LVDS_A3_POWER_UP)
+	if (lvds_encoder->a3_power == LVDS_A3_POWER_UP)
 		lvds_bpp = 8*3;
 	else
 		lvds_bpp = 6*3;
@@ -1086,6 +1088,9 @@ out:
 	DRM_DEBUG_KMS("detected %s-link lvds configuration\n",
 		      lvds_encoder->is_dual_link ? "dual" : "single");
 
+	lvds_encoder->a3_power = I915_READ(lvds_encoder->reg) &
+				 LVDS_A3_POWER_MASK;
+
 	/*
 	 * Unlock registers and just
 	 * leave them unlocked
Signature · 6 lines
2.0.0

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch