Skip to contentSkip to conversation

Support for 180 degree HW rotation

PATCH In review [email protected] 2 participants 18 messages Jul 8, 2014 – Jul 14, 2014

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

v3 cover Support for 180 degree HW rotation

From: Sonika Jindal <[email protected]>

Enables 180 degree rotation for sprite and primary planes.
Updated the primary plane rotation support as per the new universal plane design.
Most of these patches were already reviewed in intel-gfx in February 2014 thats why there is version history in few of them.

v2: Moved rotation_property to drm_plane. Added updation of FBC when rotation is again set to 0.

v3: Adding documentation patches in the series + adding reviewed-by tags to patches + adding mutex locks to update_fbc in "Add 180 degree primary plane rotation support"

Sagar Kamble (2):
Documentation: drm: Removing placeholders for generic drm properties
description
Documentation: drm: describing rotation property for i915

Sonika Jindal (2):
drm/i915: Add 180 degree primary plane rotation support
drm: Resetting rotation property

Ville Syrjälä (9):
drm: Move DRM_ROTATE bits out of omapdrm into drm_crtc.h
drm: Add support_bits parameter to drm_property_create_bitmask()
drm: Add drm_mode_create_rotation_property()
drm/omap: Switch omapdrm over to drm_mode_create_rotation_property()
drm: Add drm_rect rotation functions
drm: Add drm_rotation_simplify()
drm/i915: Add 180 degree sprite rotation support drm/i915: Make intel_plane_restore() return an error drm/i915: Add rotation property for sprites

 Documentation/DocBook/drm.tmpl       |   64 ++++------------
 drivers/gpu/drm/drm_crtc.c           |   65 +++++++++++++++-
 drivers/gpu/drm/drm_fb_helper.c      |   16 +++-
 drivers/gpu/drm/drm_rect.c           |  140 ++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/i915_reg.h      |    4 +
 drivers/gpu/drm/i915/intel_display.c |  109 ++++++++++++++++++++++++--
 drivers/gpu/drm/i915/intel_drv.h     |    3 +-
 drivers/gpu/drm/i915/intel_pm.c      |    7 ++
 drivers/gpu/drm/i915/intel_sprite.c  |   91 ++++++++++++++++++++--
 drivers/gpu/drm/omapdrm/omap_drv.h   |    7 --
 drivers/gpu/drm/omapdrm/omap_plane.c |   17 ++---
 include/drm/drm_crtc.h               |   16 +++-
 include/drm/drm_rect.h               |    6 ++
 13 files changed, 458 insertions(+), 87 deletions(-)
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH v3 1/13 drm: Move DRM_ROTATE bits out of omapdrm into drm_crtc.h

From: Ville Syrjälä <[email protected]>

The rotation property stuff should be standardized among all drivers. Move the bits to drm_crtc.h from omap_drv.h.

---
 drivers/gpu/drm/omapdrm/omap_drv.h |    7 -------
 include/drm/drm_crtc.h             |    8 ++++++++
 2 files changed, 8 insertions(+), 7 deletions(-)
drivers/gpu/drm/omapdrm/omap_drv.h +0 -7
index 284b80f..b08a450 100644
@@ -119,13 +119,6 @@ struct omap_drm_private {
 	struct omap_drm_irq error_handler;
 };
 
-/* this should probably be in drm-core to standardize amongst drivers */
-#define DRM_ROTATE_0	0
-#define DRM_ROTATE_90	1
-#define DRM_ROTATE_180	2
-#define DRM_ROTATE_270	3
-#define DRM_REFLECT_X	4
-#define DRM_REFLECT_Y	5
 
 #ifdef CONFIG_DEBUG_FS
 int omap_debugfs_init(struct drm_minor *minor);
include/drm/drm_crtc.h +8 -0
index 4ee7e26..bfc7235 100644
@@ -75,6 +75,14 @@ static inline uint64_t I642U64(int64_t val)
 	return (uint64_t)*((uint64_t *)&val);
 }
 
+/* rotation property bits */
+#define DRM_ROTATE_0	0
+#define DRM_ROTATE_90	1
+#define DRM_ROTATE_180	2
+#define DRM_ROTATE_270	3
+#define DRM_REFLECT_X	4
+#define DRM_REFLECT_Y	5
+
 enum drm_connector_force {
 	DRM_FORCE_UNSPECIFIED,
 	DRM_FORCE_OFF,
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

PATCH v3 2/13 drm: Add support_bits parameter to drm_property_create_bitmask()

In reply to [email protected]

From: Ville Syrjälä <[email protected]>

Make drm_property_create_bitmask() a bit more generic by allowing the caller to specify which bits are in fact supported. This allows multiple callers to use the same enum list, but still create different versions of the same property with different list of supported bits.

v2: Populate values[] array as non-sparse
Make supported_bits 64bit
Fix up omapdrm call site (Rob)

---
 drivers/gpu/drm/drm_crtc.c           |   17 +++++++++++++----
 drivers/gpu/drm/omapdrm/omap_plane.c |    5 ++++-
 include/drm/drm_crtc.h               |    3 ++-
 3 files changed, 19 insertions(+), 6 deletions(-)
drivers/gpu/drm/drm_crtc.c +13 -4
index 41c7212..2fbee61 100644
@@ -3395,19 +3395,28 @@ EXPORT_SYMBOL(drm_property_create_enum);
 struct drm_property *drm_property_create_bitmask(struct drm_device *dev,
 					 int flags, const char *name,
 					 const struct drm_prop_enum_list *props,
-					 int num_values)
+					 int num_props,
+					 uint64_t supported_bits)
 {
 	struct drm_property *property;
-	int i, ret;
+	int i, ret, index = 0;
+	int num_values = hweight64(supported_bits);
 
 	flags |= DRM_MODE_PROP_BITMASK;
 
 	property = drm_property_create(dev, flags, name, num_values);
 	if (!property)
 		return NULL;
+	for (i = 0; i < num_props; i++) {
+		if (!(supported_bits & (1ULL << props[i].type)))
+			continue;
 
-	for (i = 0; i < num_values; i++) {
-		ret = drm_property_add_enum(property, i,
+		if (WARN_ON(index >= num_values)) {
+			drm_property_destroy(dev, property);
+			return NULL;
+		}
+
+		ret = drm_property_add_enum(property, index++,
 				      props[i].type,
 				      props[i].name);
 		if (ret) {
drivers/gpu/drm/omapdrm/omap_plane.c +4 -1
index 3cf31ee..aff06e7 100644
@@ -317,7 +317,10 @@ void omap_plane_install_properties(struct drm_plane *plane,
 					{ DRM_REFLECT_Y,  "reflect-y" },
 			};
 			prop = drm_property_create_bitmask(dev, 0, "rotation",
-					props, ARRAY_SIZE(props));
+					props, ARRAY_SIZE(props),
+					BIT(DRM_ROTATE_0) | BIT(DRM_ROTATE_90) |
+					BIT(DRM_ROTATE_180) | BIT(DRM_ROTATE_270) |
+					BIT(DRM_REFLECT_X) | BIT(DRM_REFLECT_Y));
 			if (prop == NULL)
 				return;
 			priv->rotation_prop = prop;
include/drm/drm_crtc.h +2 -1
index bfc7235..cb4850a 100644
@@ -1006,7 +1006,8 @@ extern struct drm_property *drm_property_create_enum(struct drm_device *dev, int
 struct drm_property *drm_property_create_bitmask(struct drm_device *dev,
 					 int flags, const char *name,
 					 const struct drm_prop_enum_list *props,
-					 int num_values);
+					 int num_props,
+					 uint64_t supported_bits);
 struct drm_property *drm_property_create_range(struct drm_device *dev, int flags,
 					 const char *name,
 					 uint64_t min, uint64_t max);
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

PATCH v3 3/13 drm: Add drm_mode_create_rotation_property()

In reply to [email protected]

From: Ville Syrjälä <[email protected]>

Add a function to create a standards compliant rotation property.

---
 drivers/gpu/drm/drm_crtc.c |   18 ++++++++++++++++++
 include/drm/drm_crtc.h     |    2 ++
 2 files changed, 20 insertions(+)
drivers/gpu/drm/drm_crtc.c +18 -0
index 2fbee61..f224d4d 100644
@@ -4959,3 +4959,21 @@ void drm_mode_config_cleanup(struct drm_device *dev)
 	drm_modeset_lock_fini(&dev->mode_config.connection_mutex);
 }
 EXPORT_SYMBOL(drm_mode_config_cleanup);
+
+struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
+						       unsigned int supported_rotations)
+{
+	static const struct drm_prop_enum_list props[] = {
+		{ DRM_ROTATE_0,   "rotate-0" },
+		{ DRM_ROTATE_90,  "rotate-90" },
+		{ DRM_ROTATE_180, "rotate-180" },
+		{ DRM_ROTATE_270, "rotate-270" },
+		{ DRM_REFLECT_X,  "reflect-x" },
+		{ DRM_REFLECT_Y,  "reflect-y" },
+	};
+
+	return drm_property_create_bitmask(dev, 0, "rotation",
+					   props, ARRAY_SIZE(props),
+					   supported_rotations);
+}
+EXPORT_SYMBOL(drm_mode_create_rotation_property);
include/drm/drm_crtc.h +2 -0
index cb4850a..f7b383b 100644
@@ -1113,6 +1113,8 @@ extern int drm_format_plane_cpp(uint32_t format, int plane);
 extern int drm_format_horz_chroma_subsampling(uint32_t format);
 extern int drm_format_vert_chroma_subsampling(uint32_t format);
 extern const char *drm_get_format_name(uint32_t format);
+extern struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
+							      unsigned int supported_rotations);
 
 /* Helpers */
 
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

PATCH v3 4/13 drm/omap: Switch omapdrm over to drm_mode_create_rotation_property()

In reply to [email protected]

From: Ville Syrjälä <[email protected]>

Use the new drm_mode_create_rotation_property() in omapdrm.

---
 drivers/gpu/drm/omapdrm/omap_plane.c |   20 +++++++-------------
 1 file changed, 7 insertions(+), 13 deletions(-)
drivers/gpu/drm/omapdrm/omap_plane.c +7 -13
index aff06e7..da9d15d 100644
@@ -308,19 +308,13 @@ void omap_plane_install_properties(struct drm_plane *plane,
 	if (priv->has_dmm) {
 		prop = priv->rotation_prop;
 		if (!prop) {
-			const struct drm_prop_enum_list props[] = {
-					{ DRM_ROTATE_0,   "rotate-0" },
-					{ DRM_ROTATE_90,  "rotate-90" },
-					{ DRM_ROTATE_180, "rotate-180" },
-					{ DRM_ROTATE_270, "rotate-270" },
-					{ DRM_REFLECT_X,  "reflect-x" },
-					{ DRM_REFLECT_Y,  "reflect-y" },
-			};
-			prop = drm_property_create_bitmask(dev, 0, "rotation",
-					props, ARRAY_SIZE(props),
-					BIT(DRM_ROTATE_0) | BIT(DRM_ROTATE_90) |
-					BIT(DRM_ROTATE_180) | BIT(DRM_ROTATE_270) |
-					BIT(DRM_REFLECT_X) | BIT(DRM_REFLECT_Y));
+			prop = drm_mode_create_rotation_property(dev,
+								 BIT(DRM_ROTATE_0) |
+								 BIT(DRM_ROTATE_90) |
+								 BIT(DRM_ROTATE_180) |
+								 BIT(DRM_ROTATE_270) |
+								 BIT(DRM_REFLECT_X) |
+								 BIT(DRM_REFLECT_Y));
 			if (prop == NULL)
 				return;
 			priv->rotation_prop = prop;
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

PATCH v3 5/13 drm: Add drm_rect rotation functions

In reply to [email protected]

From: Ville Syrjälä <[email protected]>

Add some helper functions to move drm_rects between different rotated coordinate spaces. One function does the forward transform and another does the inverse.

---
 drivers/gpu/drm/drm_rect.c |  140 ++++++++++++++++++++++++++++++++++++++++++++
 include/drm/drm_rect.h     |    6 ++
 2 files changed, 146 insertions(+)
drivers/gpu/drm/drm_rect.c +140 -0
index 7047ca0..631f5af 100644
@@ -293,3 +293,143 @@ void drm_rect_debug_print(const struct drm_rect *r, bool fixed_point)
 		DRM_DEBUG_KMS("%dx%d%+d%+d\n", w, h, r->x1, r->y1);
 }
 EXPORT_SYMBOL(drm_rect_debug_print);
+
+/**
+ * drm_rect_rotate - Rotate the rectangle
+ * @r: rectangle to be rotated
+ * @width: Width of the coordinate space
+ * @height: Height of the coordinate space
+ * @rotation: Transformation to be applied
+ *
+ * Apply @rotation to the coordinates of rectangle @r.
+ *
+ * @width and @height combined with @rotation define
+ * the location of the new origin.
+ *
+ * @width correcsponds to the horizontal and @height
+ * to the vertical axis of the untransformed coordinate
+ * space.
+ */
+void drm_rect_rotate(struct drm_rect *r,
+		     int width, int height,
+		     unsigned int rotation)
+{
+	struct drm_rect tmp;
+
+	if (rotation & (BIT(DRM_REFLECT_X) | BIT(DRM_REFLECT_Y))) {
+		tmp = *r;
+
+		if (rotation & BIT(DRM_REFLECT_X)) {
+			r->x1 = width - tmp.x2;
+			r->x2 = width - tmp.x1;
+		}
+
+		if (rotation & BIT(DRM_REFLECT_Y)) {
+			r->y1 = height - tmp.y2;
+			r->y2 = height - tmp.y1;
+		}
+	}
+
+	switch (rotation & 0xf) {
+	case BIT(DRM_ROTATE_0):
+		break;
+	case BIT(DRM_ROTATE_90):
+		tmp = *r;
+		r->x1 = tmp.y1;
+		r->x2 = tmp.y2;
+		r->y1 = width - tmp.x2;
+		r->y2 = width - tmp.x1;
+		break;
+	case BIT(DRM_ROTATE_180):
+		tmp = *r;
+		r->x1 = width - tmp.x2;
+		r->x2 = width - tmp.x1;
+		r->y1 = height - tmp.y2;
+		r->y2 = height - tmp.y1;
+		break;
+	case BIT(DRM_ROTATE_270):
+		tmp = *r;
+		r->x1 = height - tmp.y2;
+		r->x2 = height - tmp.y1;
+		r->y1 = tmp.x1;
+		r->y2 = tmp.x2;
+		break;
+	default:
+		break;
+	}
+}
+EXPORT_SYMBOL(drm_rect_rotate);
+
+/**
+ * drm_rect_rotate_inv - Inverse rotate the rectangle
+ * @r: rectangle to be rotated
+ * @width: Width of the coordinate space
+ * @height: Height of the coordinate space
+ * @rotation: Transformation whose inverse is to be applied
+ *
+ * Apply the inverse of @rotation to the coordinates
+ * of rectangle @r.
+ *
+ * @width and @height combined with @rotation define
+ * the location of the new origin.
+ *
+ * @width correcsponds to the horizontal and @height
+ * to the vertical axis of the original untransformed
+ * coordinate space, so that you never have to flip
+ * them when doing a rotatation and its inverse.
+ * That is, if you do:
+ *
+ * drm_rotate(&r, width, height, rotation);
+ * drm_rotate_inv(&r, width, height, rotation);
+ *
+ * you will always get back the original rectangle.
+ */
+void drm_rect_rotate_inv(struct drm_rect *r,
+			 int width, int height,
+			 unsigned int rotation)
+{
+	struct drm_rect tmp;
+
+	switch (rotation & 0xf) {
+	case BIT(DRM_ROTATE_0):
+		break;
+	case BIT(DRM_ROTATE_90):
+		tmp = *r;
+		r->x1 = width - tmp.y2;
+		r->x2 = width - tmp.y1;
+		r->y1 = tmp.x1;
+		r->y2 = tmp.x2;
+		break;
+	case BIT(DRM_ROTATE_180):
+		tmp = *r;
+		r->x1 = width - tmp.x2;
+		r->x2 = width - tmp.x1;
+		r->y1 = height - tmp.y2;
+		r->y2 = height - tmp.y1;
+		break;
+	case BIT(DRM_ROTATE_270):
+		tmp = *r;
+		r->x1 = tmp.y1;
+		r->x2 = tmp.y2;
+		r->y1 = height - tmp.x2;
+		r->y2 = height - tmp.x1;
+		break;
+	default:
+		break;
+	}
+
+	if (rotation & (BIT(DRM_REFLECT_X) | BIT(DRM_REFLECT_Y))) {
+		tmp = *r;
+
+		if (rotation & BIT(DRM_REFLECT_X)) {
+			r->x1 = width - tmp.x2;
+			r->x2 = width - tmp.x1;
+		}
+
+		if (rotation & BIT(DRM_REFLECT_Y)) {
+			r->y1 = height - tmp.y2;
+			r->y2 = height - tmp.y1;
+		}
+	}
+}
+EXPORT_SYMBOL(drm_rect_rotate_inv);
include/drm/drm_rect.h +6 -0
index d128629..26bb55e 100644
@@ -163,5 +163,11 @@ int drm_rect_calc_vscale_relaxed(struct drm_rect *src,
 				 struct drm_rect *dst,
 				 int min_vscale, int max_vscale);
 void drm_rect_debug_print(const struct drm_rect *r, bool fixed_point);
+void drm_rect_rotate(struct drm_rect *r,
+		     int width, int height,
+		     unsigned int rotation);
+void drm_rect_rotate_inv(struct drm_rect *r,
+			 int width, int height,
+			 unsigned int rotation);
 
 #endif
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#6 lore raw

PATCH v3 6/13 drm: Add drm_rotation_simplify()

In reply to [email protected]

From: Ville Syrjälä <[email protected]>

drm_rotation_simplify() can be used to eliminate unsupported rotation flags. It will check if any unsupported flags are present, and if so it will modify the rotation to an alternate form by adding 180 degrees to rotation angle, and flipping the reflect x and y bits. The hope is that this identity transform will eliminate the unsupported flags.

Of course that might not result in any more supported rotation, so the caller is still responsible for checking the result afterwards.

---
 drivers/gpu/drm/drm_crtc.c |   30 ++++++++++++++++++++++++++++++
 include/drm/drm_crtc.h     |    2 ++
 2 files changed, 32 insertions(+)
drivers/gpu/drm/drm_crtc.c +30 -0
index f224d4d..89bab66 100644
@@ -4842,6 +4842,36 @@ int drm_format_vert_chroma_subsampling(uint32_t format)
 EXPORT_SYMBOL(drm_format_vert_chroma_subsampling);
 
 /**
+ * drm_rotation_simplify() - Try to simplify the rotation
+ * @rotation: Rotation to be simplified
+ * @supported_rotations: Supported rotations
+ *
+ * Attempt to simplify the rotation to a form that is supported.
+ * Eg. if the hardware supports everything except DRM_REFLECT_X
+ * one could call this function like this:
+ *
+ * drm_rotation_simplify(rotation, BIT(DRM_ROTATE_0) |
+ *                       BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_180) |
+ *                       BIT(DRM_ROTATE_270) | BIT(DRM_REFLECT_Y));
+ *
+ * to eliminate the DRM_ROTATE_X flag. Depending on what kind of
+ * transforms the hardware supports, this function may not
+ * be able to produce a supported transform, so the caller should
+ * check the result afterwards.
+ */
+unsigned int drm_rotation_simplify(unsigned int rotation,
+				   unsigned int supported_rotations)
+{
+	if (rotation & ~supported_rotations) {
+		rotation ^= BIT(DRM_REFLECT_X) | BIT(DRM_REFLECT_Y);
+		rotation = (rotation & ~0xf) | BIT((ffs(rotation & 0xf) + 1) % 4);
+	}
+
+	return rotation;
+}
+EXPORT_SYMBOL(drm_rotation_simplify);
+
+/**
  * drm_mode_config_init - initialize DRM mode_configuration structure
  * @dev: DRM device
  *
include/drm/drm_crtc.h +2 -0
index f7b383b..08ed55e 100644
@@ -1115,6 +1115,8 @@ extern int drm_format_vert_chroma_subsampling(uint32_t format);
 extern const char *drm_get_format_name(uint32_t format);
 extern struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
 							      unsigned int supported_rotations);
+extern unsigned int drm_rotation_simplify(unsigned int rotation,
+					  unsigned int supported_rotations);
 
 /* Helpers */
 
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#7 lore raw

PATCH v3 7/13 drm/i915: Add 180 degree sprite rotation support

In reply to [email protected]

From: Ville Syrjälä <[email protected]>

The sprite planes (in fact all display planes starting from gen4) support 180 degree rotation. Add the relevant low level bits to the sprite code to make use of that feature.

The upper layers are not yet plugged in.

v2: HSW handles the rotated buffer offset automagically

v3: BDW also handles the rotated buffer offset automagically

Testcase: igt/kms_rotation_crc

---
 drivers/gpu/drm/i915/i915_reg.h     |    3 +++
 drivers/gpu/drm/i915/intel_drv.h    |    1 +
 drivers/gpu/drm/i915/intel_sprite.c |   37 +++++++++++++++++++++++++++++++++++
 3 files changed, 41 insertions(+)
drivers/gpu/drm/i915/i915_reg.h +3 -0
index 3488567..c70c804 100644
@@ -4171,6 +4171,7 @@ enum punit_power_well {
 #define   DVS_YUV_ORDER_UYVY	(1<<16)
 #define   DVS_YUV_ORDER_YVYU	(2<<16)
 #define   DVS_YUV_ORDER_VYUY	(3<<16)
+#define   DVS_ROTATE_180	(1<<15)
 #define   DVS_DEST_KEY		(1<<2)
 #define   DVS_TRICKLE_FEED_DISABLE (1<<14)
 #define   DVS_TILED		(1<<10)
@@ -4241,6 +4242,7 @@ enum punit_power_well {
 #define   SPRITE_YUV_ORDER_UYVY		(1<<16)
 #define   SPRITE_YUV_ORDER_YVYU		(2<<16)
 #define   SPRITE_YUV_ORDER_VYUY		(3<<16)
+#define   SPRITE_ROTATE_180		(1<<15)
 #define   SPRITE_TRICKLE_FEED_DISABLE	(1<<14)
 #define   SPRITE_INT_GAMMA_ENABLE	(1<<13)
 #define   SPRITE_TILED			(1<<10)
@@ -4314,6 +4316,7 @@ enum punit_power_well {
 #define   SP_YUV_ORDER_UYVY		(1<<16)
 #define   SP_YUV_ORDER_YVYU		(2<<16)
 #define   SP_YUV_ORDER_VYUY		(3<<16)
+#define   SP_ROTATE_180			(1<<15)
 #define   SP_TILED			(1<<10)
 #define _SPALINOFF		(VLV_DISPLAY_BASE + 0x72184)
 #define _SPASTRIDE		(VLV_DISPLAY_BASE + 0x72188)
drivers/gpu/drm/i915/intel_drv.h +1 -0
index ab5962b..67b1c59 100644
@@ -437,6 +437,7 @@ struct intel_plane {
 	unsigned int crtc_w, crtc_h;
 	uint32_t src_x, src_y;
 	uint32_t src_w, src_h;
+	unsigned int rotation;
 
 	/* Since we need to change the watermarks before/after
 	 * enabling/disabling the planes, we need to store the parameters here
drivers/gpu/drm/i915/intel_sprite.c +37 -0
index 404335d..54d4224 100644
@@ -163,6 +163,7 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
 	sprctl &= ~SP_PIXFORMAT_MASK;
 	sprctl &= ~SP_YUV_BYTE_ORDER_MASK;
 	sprctl &= ~SP_TILED;
+	sprctl &= ~SP_ROTATE_180;
 
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_YUYV:
@@ -234,6 +235,14 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
 							fb->pitches[0]);
 	linear_offset -= sprsurf_offset;
 
+	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
+		sprctl |= SP_ROTATE_180;
+
+		x += src_w;
+		y += src_h;
+		linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
+	}
+
 	atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
 
 	intel_update_primary_plane(intel_crtc);
@@ -363,6 +372,7 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	sprctl &= ~SPRITE_RGB_ORDER_RGBX;
 	sprctl &= ~SPRITE_YUV_BYTE_ORDER_MASK;
 	sprctl &= ~SPRITE_TILED;
+	sprctl &= ~SPRITE_ROTATE_180;
 
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_XBGR8888:
@@ -424,6 +434,17 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 					       pixel_size, fb->pitches[0]);
 	linear_offset -= sprsurf_offset;
 
+	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
+		sprctl |= SPRITE_ROTATE_180;
+
+		/* HSW and BDW does this automagically in hardware */
+		if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
+			x += src_w;
+			y += src_h;
+			linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
+		}
+	}
+
 	atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
 
 	intel_update_primary_plane(intel_crtc);
@@ -569,6 +590,7 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	dvscntr &= ~DVS_RGB_ORDER_XBGR;
 	dvscntr &= ~DVS_YUV_BYTE_ORDER_MASK;
 	dvscntr &= ~DVS_TILED;
+	dvscntr &= ~DVS_ROTATE_180;
 
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_XBGR8888:
@@ -625,6 +647,14 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 					       pixel_size, fb->pitches[0]);
 	linear_offset -= dvssurf_offset;
 
+	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
+		dvscntr |= DVS_ROTATE_180;
+
+		x += src_w;
+		y += src_h;
+		linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
+	}
+
 	atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
 
 	intel_update_primary_plane(intel_crtc);
@@ -883,6 +913,9 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	max_scale = intel_plane->max_downscale << 16;
 	min_scale = intel_plane->can_scale ? 1 : (1 << 16);
 
+	drm_rect_rotate(&src, fb->width << 16, fb->height << 16,
+			intel_plane->rotation);
+
 	hscale = drm_rect_calc_hscale_relaxed(&src, &dst, min_scale, max_scale);
 	BUG_ON(hscale < 0);
 
@@ -921,6 +954,9 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 				     drm_rect_width(&dst) * hscale - drm_rect_width(&src),
 				     drm_rect_height(&dst) * vscale - drm_rect_height(&src));
 
+		drm_rect_rotate_inv(&src, fb->width << 16, fb->height << 16,
+				    intel_plane->rotation);
+
 		/* sanity check to make sure the src viewport wasn't enlarged */
 		WARN_ON(src.x1 < (int) src_x ||
 			src.y1 < (int) src_y ||
@@ -1296,6 +1332,7 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
 
 	intel_plane->pipe = pipe;
 	intel_plane->plane = plane;
+	intel_plane->rotation = BIT(DRM_ROTATE_0);
 	possible_crtcs = (1 << pipe);
 	ret = drm_plane_init(dev, &intel_plane->base, possible_crtcs,
 			     &intel_plane_funcs,
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#8 lore raw

PATCH v3 8/13 drm/i915: Make intel_plane_restore() return an error

In reply to [email protected]

From: Ville Syrjälä <[email protected]>

Propagate the error from intel_update_plane() up through intel_plane_restore() to the caller. This will be used for rollback purposes when setting properties fails.

---
 drivers/gpu/drm/i915/intel_drv.h    |    2 +-
 drivers/gpu/drm/i915/intel_sprite.c |   14 +++++++-------
 2 files changed, 8 insertions(+), 8 deletions(-)
drivers/gpu/drm/i915/intel_drv.h +1 -1
index 67b1c59..da5a3ca 100644
@@ -993,7 +993,7 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob);
 int intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane);
 void intel_flush_primary_plane(struct drm_i915_private *dev_priv,
 			       enum plane plane);
-void intel_plane_restore(struct drm_plane *plane);
+int intel_plane_restore(struct drm_plane *plane);
 void intel_plane_disable(struct drm_plane *plane);
 int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
 			      struct drm_file *file_priv);
drivers/gpu/drm/i915/intel_sprite.c +7 -7
index 54d4224..cbad738 100644
@@ -1202,18 +1202,18 @@ out_unlock:
 	return ret;
 }
 
-void intel_plane_restore(struct drm_plane *plane)
+int intel_plane_restore(struct drm_plane *plane)
 {
 	struct intel_plane *intel_plane = to_intel_plane(plane);
 
 	if (!plane->crtc || !plane->fb)
-		return;
+		return 0;
 
-	intel_update_plane(plane, plane->crtc, plane->fb,
-			   intel_plane->crtc_x, intel_plane->crtc_y,
-			   intel_plane->crtc_w, intel_plane->crtc_h,
-			   intel_plane->src_x, intel_plane->src_y,
-			   intel_plane->src_w, intel_plane->src_h);
+	return intel_update_plane(plane, plane->crtc, plane->fb,
+				  intel_plane->crtc_x, intel_plane->crtc_y,
+				  intel_plane->crtc_w, intel_plane->crtc_h,
+				  intel_plane->src_x, intel_plane->src_y,
+				  intel_plane->src_w, intel_plane->src_h);
 }
 
 void intel_plane_disable(struct drm_plane *plane)
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#9 lore raw

PATCH v3 9/13 drm/i915: Add rotation property for sprites

In reply to [email protected]

From: Ville Syrjälä <[email protected]>

Sprite planes support 180 degree rotation. The lower layers are now in place, so hook in the standard rotation property to expose the feature to the users.

v2: Moving rotation_property to drm_plane

---
 drivers/gpu/drm/i915/intel_sprite.c |   40 ++++++++++++++++++++++++++++++++++-
 include/drm/drm_crtc.h              |    1 +
 2 files changed, 40 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_sprite.c +39 -1
index cbad738..aa63027 100644
@@ -1202,6 +1202,29 @@ out_unlock:
 	return ret;
 }
 
+static int intel_plane_set_property(struct drm_plane *plane,
+				    struct drm_property *prop,
+				    uint64_t val)
+{
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+	uint64_t old_val;
+	int ret = -ENOENT;
+
+	if (prop == plane->rotation_property) {
+		/* exactly one rotation angle please */
+		if (hweight32(val & 0xf) != 1)
+			return -EINVAL;
+
+		old_val = intel_plane->rotation;
+		intel_plane->rotation = val;
+		ret = intel_plane_restore(plane);
+		if (ret)
+			intel_plane->rotation = old_val;
+	}
+
+	return ret;
+}
+
 int intel_plane_restore(struct drm_plane *plane)
 {
 	struct intel_plane *intel_plane = to_intel_plane(plane);
@@ -1228,6 +1251,7 @@ static const struct drm_plane_funcs intel_plane_funcs = {
 	.update_plane = intel_update_plane,
 	.disable_plane = intel_disable_plane,
 	.destroy = intel_destroy_plane,
+	.set_property = intel_plane_set_property,
 };
 
 static uint32_t ilk_plane_formats[] = {
@@ -1338,8 +1362,22 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
 			     &intel_plane_funcs,
 			     plane_formats, num_plane_formats,
 			     false);
-	if (ret)
+	if (ret) {
 		kfree(intel_plane);
+		goto out;
+	}
+
+	if (!intel_plane->base.rotation_property)
+		intel_plane->base.rotation_property =
+			drm_mode_create_rotation_property(dev,
+							  BIT(DRM_ROTATE_0) |
+							  BIT(DRM_ROTATE_180));
+
+	if (intel_plane->base.rotation_property)
+		drm_object_attach_property(&intel_plane->base.base,
+					   intel_plane->base.rotation_property,
+					   intel_plane->rotation);
 
+ out:
 	return ret;
 }
include/drm/drm_crtc.h +1 -0
index 08ed55e..6006c70 100644
@@ -615,6 +615,7 @@ struct drm_plane {
 
 	const struct drm_plane_funcs *funcs;
 
+	struct drm_property *rotation_property;
 	struct drm_object_properties properties;
 
 	enum drm_plane_type type;
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#10 lore raw

Re: [Intel-gfx] [v3 09/13] drm/i915: Add rotation property for sprites

Quoted 7 lines · On Tue, Jul 08, 2014 at 10:31:59AM +0530, [email protected] wrote:

From: Ville Syrjälä <[email protected]>

Sprite planes support 180 degree rotation. The lower layers are now in place, so hook in the standard rotation property to expose the feature to the users.

v2: Moving rotation_property to drm_plane

This change is wrong and I haven't figured out who suggested it. The actual property is global (i.e. we should only have 1), but then it can be attached to different pieces.

So here's what we need to do instead:
- Add the rotation property to dev->mode_config.
- Convert omapdrm to also store it there by moving it out of the omap driver private structure.
- Probably better to just unconditionally set it up, but not sure.
- Adjust the fb helper code accordingly.
- Rip the omap restore rotation code in lastclose since the fb helper will now take care of this.

I've merged the drm core parts for now but dropped the i915 implementation and the fb helper patch again.

Thanks, Daniel

Quoted 95 lines
---
 drivers/gpu/drm/i915/intel_sprite.c |   40 ++++++++++++++++++++++++++++++++++-
 include/drm/drm_crtc.h              |    1 +
 2 files changed, 40 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_sprite.c +39 -1
index cbad738..aa63027 100644
@@ -1202,6 +1202,29 @@ out_unlock:
 	return ret;
 }
 
+static int intel_plane_set_property(struct drm_plane *plane,
+				    struct drm_property *prop,
+				    uint64_t val)
+{
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+	uint64_t old_val;
+	int ret = -ENOENT;
+
+	if (prop == plane->rotation_property) {
+		/* exactly one rotation angle please */
+		if (hweight32(val & 0xf) != 1)
+			return -EINVAL;
+
+		old_val = intel_plane->rotation;
+		intel_plane->rotation = val;
+		ret = intel_plane_restore(plane);
+		if (ret)
+			intel_plane->rotation = old_val;
+	}
+
+	return ret;
+}
+
 int intel_plane_restore(struct drm_plane *plane)
 {
 	struct intel_plane *intel_plane = to_intel_plane(plane);
@@ -1228,6 +1251,7 @@ static const struct drm_plane_funcs intel_plane_funcs = {
 	.update_plane = intel_update_plane,
 	.disable_plane = intel_disable_plane,
 	.destroy = intel_destroy_plane,
+	.set_property = intel_plane_set_property,
 };
 
 static uint32_t ilk_plane_formats[] = {
@@ -1338,8 +1362,22 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
 			     &intel_plane_funcs,
 			     plane_formats, num_plane_formats,
 			     false);
-	if (ret)
+	if (ret) {
 		kfree(intel_plane);
+		goto out;
+	}
+
+	if (!intel_plane->base.rotation_property)
+		intel_plane->base.rotation_property =
+			drm_mode_create_rotation_property(dev,
+							  BIT(DRM_ROTATE_0) |
+							  BIT(DRM_ROTATE_180));
+
+	if (intel_plane->base.rotation_property)
+		drm_object_attach_property(&intel_plane->base.base,
+					   intel_plane->base.rotation_property,
+					   intel_plane->rotation);
 
+ out:
 	return ret;
 }
include/drm/drm_crtc.h +1 -0
index 08ed55e..6006c70 100644
@@ -615,6 +615,7 @@ struct drm_plane {
 
 	const struct drm_plane_funcs *funcs;
 
+	struct drm_property *rotation_property;
 	struct drm_object_properties properties;
 
 	enum drm_plane_type type;
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
#11 lore raw

Re: [v3 09/13] drm/i915: Add rotation property for sprites

Quoted 13 lines · Daniel Vetter
Quoted 7 lines · On Tue, Jul 08, 2014 at 10:31:59AM +0530, [email protected] wrote:

From: Ville Syrjälä <[email protected]>

Sprite planes support 180 degree rotation. The lower layers are now in place, so hook in the standard rotation property to expose the feature to the users.

v2: Moving rotation_property to drm_plane

This change is wrong and I haven't figured out who suggested it. The actual property is global (i.e. we should only have 1), but then it can be attached to different pieces.

Quoted 9 lines

So here's what we need to do instead:
- Add the rotation property to dev->mode_config.
- Convert omapdrm to also store it there by moving it out of the omap driver private structure.
- Probably better to just unconditionally set it up, but not sure.
- Adjust the fb helper code accordingly.
- Rip the omap restore rotation code in lastclose since the fb helper will now take care of this.

Ok, I will make this property a part of mode_config and will attach that to drm_plane, and will post the remaining patches. -Sonika

Quoted 101 lines

I've merged the drm core parts for now but dropped the i915 implementation and the fb helper patch again.

Thanks, Daniel

Quoted 95 lines
---
  drivers/gpu/drm/i915/intel_sprite.c |   40 ++++++++++++++++++++++++++++++++++-
  include/drm/drm_crtc.h              |    1 +
  2 files changed, 40 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_sprite.c +39 -1
index cbad738..aa63027 100644
@@ -1202,6 +1202,29 @@ out_unlock:
  	return ret;
  }
 
+static int intel_plane_set_property(struct drm_plane *plane,
+				    struct drm_property *prop,
+				    uint64_t val)
+{
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+	uint64_t old_val;
+	int ret = -ENOENT;
+
+	if (prop == plane->rotation_property) {
+		/* exactly one rotation angle please */
+		if (hweight32(val & 0xf) != 1)
+			return -EINVAL;
+
+		old_val = intel_plane->rotation;
+		intel_plane->rotation = val;
+		ret = intel_plane_restore(plane);
+		if (ret)
+			intel_plane->rotation = old_val;
+	}
+
+	return ret;
+}
+
  int intel_plane_restore(struct drm_plane *plane)
  {
  	struct intel_plane *intel_plane = to_intel_plane(plane);
@@ -1228,6 +1251,7 @@ static const struct drm_plane_funcs intel_plane_funcs = {
  	.update_plane = intel_update_plane,
  	.disable_plane = intel_disable_plane,
  	.destroy = intel_destroy_plane,
+	.set_property = intel_plane_set_property,
  };
 
  static uint32_t ilk_plane_formats[] = {
@@ -1338,8 +1362,22 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
  			     &intel_plane_funcs,
  			     plane_formats, num_plane_formats,
  			     false);
-	if (ret)
+	if (ret) {
  		kfree(intel_plane);
+		goto out;
+	}
+
+	if (!intel_plane->base.rotation_property)
+		intel_plane->base.rotation_property =
+			drm_mode_create_rotation_property(dev,
+							  BIT(DRM_ROTATE_0) |
+							  BIT(DRM_ROTATE_180));
+
+	if (intel_plane->base.rotation_property)
+		drm_object_attach_property(&intel_plane->base.base,
+					   intel_plane->base.rotation_property,
+					   intel_plane->rotation);
 
+ out:
  	return ret;
  }
include/drm/drm_crtc.h +1 -1
index 08ed55e..6006c70 100644
@@ -615,6 +615,7 @@ struct drm_plane {
 
  	const struct drm_plane_funcs *funcs;
 
+	struct drm_property *rotation_property;
  	struct drm_object_properties properties;
 
  	enum drm_plane_type type;
--

1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

#12 lore raw

Re: [Intel-gfx] [v3 09/13] drm/i915: Add rotation property for sprites

In reply to [email protected]
Quoted 6 lines · On Tue, Jul 08, 2014 at 10:31:59AM +0530, [email protected] wrote:

From: Ville Syrjälä <[email protected]>

Sprite planes support 180 degree rotation. The lower layers are now in place, so hook in the standard rotation property to expose the feature to the users.

Quoted 6 lines

v2: Moving rotation_property to drm_plane

Also this r-b tag was for v1 (which was ok), not for v2. If you carry over such a review-by tag and make functional changes not discussed with the reviewer you _must_ at least mark the r-b with a (v1) or if it's a big change, drop the tag completely.
-Daniel

Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
#13 lore raw

Re: [v3 09/13] drm/i915: Add rotation property for sprites

In reply to [email protected]
Quoted 8 lines · On Tue, Jul 08, 2014 at 10:31:59AM +0530, [email protected] wrote:

From: Ville Syrjälä <[email protected]>

Sprite planes support 180 degree rotation. The lower layers are now in place, so hook in the standard rotation property to expose the feature to the users.

v2: Moving rotation_property to drm_plane

Quoted 7 lines
---
 drivers/gpu/drm/i915/intel_sprite.c |   40 ++++++++++++++++++++++++++++++++++-
 include/drm/drm_crtc.h              |    1 +

One more: A patch titled with "drm/i915: ..." really shouldn't touch anything outside of drm/i915 directories and so shouldn't introduce any changes to core drm code. Such changes always need to be split out into a separate drm patch. Exceptions (like refactoring function interfaces) obviously apply.
-Daniel

Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
#14 lore raw

PATCH v3 10/13 drm/i915: Add 180 degree primary plane rotation support

In reply to [email protected]

From: Sonika Jindal <[email protected]>

Primary planes support 180 degree rotation. Expose the feature through rotation drm property.

v2: Calculating linear/tiled offsets based on pipe source width and height. Added 180 degree rotation support in ironlake_update_plane.

v3: Checking if CRTC is active before issueing update_plane. Added wait for vblank to make sure we dont overtake page flips. Disabling FBC since it does not work with rotated planes.

v4: Updated rotation checks for pending flips, fbc disable. Creating rotation property only for Gen4 onwards. Property resetting as part of lastclose.

v5: Resetting property in i915_driver_lastclose properly for planes and crtcs. Fixed linear offset calculation that was off by 1 w.r.t width in i9xx_update_plane and ironlake_update_plane. Removed tab based indentation and unnecessary braces in intel_crtc_set_property and intel_update_fbc. FBC and flip related checks should be done only for valid crtcs.

v6: Minor nits in FBC disable checks for comments in intel_crtc_set_property and positioning the disable code in intel_update_fbc.

v7: In case rotation property on inactive crtc is updated, we return successfully printing debug log as crtc is inactive and only property change is preserved.

v8: update_plane is changed to update_primary_plane, crtc->fb is changed to crtc->primary->fb and return value of update_primary_plane is ignored.

v9: added rotation property to primary plane instead of crtc. Removing reset of rotation property from lastclose. rotation_property is moved to drm_plane,so drm layer will take care of resetting.

v10: adding updation of fbc when rotation is set to 0.

v11: adding mutex locks for update_fbc. Allowing rotation only if value is different than old one. Other minor cleanups.

Testcase: igt/kms_rotation_crc

---
 drivers/gpu/drm/i915/i915_reg.h      |    1 +
 drivers/gpu/drm/i915/intel_display.c |  109 ++++++++++++++++++++++++++++++++--
 drivers/gpu/drm/i915/intel_pm.c      |    7 +++
 3 files changed, 112 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +1 -0
index c70c804..c600d3b 100644
@@ -4087,6 +4087,7 @@ enum punit_power_well {
 #define   DISPPLANE_NO_LINE_DOUBLE		0
 #define   DISPPLANE_STEREO_POLARITY_FIRST	0
 #define   DISPPLANE_STEREO_POLARITY_SECOND	(1<<18)
+#define   DISPPLANE_ROTATE_180         (1<<15)
 #define   DISPPLANE_TRICKLE_FEED_DISABLE	(1<<14) /* Ironlake */
 #define   DISPPLANE_TILED			(1<<10)
 #define _DSPAADDR				0x70184
drivers/gpu/drm/i915/intel_display.c +104 -5

187 lines not on this page · raw message

drivers/gpu/drm/i915/intel_pm.c +7 -0
index 2043c4b..bd6af91 100644
@@ -562,6 +562,13 @@ void intel_update_fbc(struct drm_device *dev)
 		goto out_disable;
 	}
 
+	if (INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev) &&
+	    to_intel_plane(crtc->primary)->rotation != BIT(DRM_ROTATE_0)) {
+		if (set_no_fbc_reason(dev_priv, FBC_UNSUPPORTED_MODE))
+			DRM_DEBUG_KMS("Rotation unsupported, disabling\n");
+		goto out_disable;
+	}
+
 	/* If the kernel debugger is active, always disable compression */
 	if (in_dbg_master())
 		goto out_disable;
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#15 lore raw

PATCH v3 11/13 drm: Resetting rotation property

In reply to [email protected]

From: Sonika Jindal <[email protected]>

Reset rotation property to 0 wherever applicable

v2: Also calling set_property of the plane to set the rotation in the plane structure.

---
 drivers/gpu/drm/drm_fb_helper.c |   16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)
drivers/gpu/drm/drm_fb_helper.c +15 -1
index d5d8cea..30806b4 100644
@@ -282,9 +282,23 @@ static bool restore_fbdev_mode(struct drm_fb_helper *fb_helper)
 
 	drm_warn_on_modeset_not_all_locked(dev);
 
-	list_for_each_entry(plane, &dev->mode_config.plane_list, head)
+	list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
+
+		if (plane->rotation_property) {
+			int ret = 0;
+			if (plane->funcs->set_property)
+				ret = plane->funcs->set_property(plane,
+					plane->rotation_property,
+					BIT(DRM_ROTATE_0));
+			if (!ret)
+				drm_object_property_set_value(&plane->base,
+					plane->rotation_property,
+					BIT(DRM_ROTATE_0));
+		}
+
 		if (plane->type != DRM_PLANE_TYPE_PRIMARY)
 			drm_plane_force_disable(plane);
+	}
 
 	for (i = 0; i < fb_helper->crtc_count; i++) {
 		struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set;
Signature · 1 line
1.7.10.4
#16 lore raw

PATCH v3 12/13 Documentation: drm: Removing placeholders for generic drm properties description

In reply to [email protected]

From: Sagar Kamble <[email protected]>

These property descriptions were kept as placeholder. Removing them for simplicity.

---
 Documentation/DocBook/drm.tmpl |   64 +++++++---------------------------------
 1 file changed, 10 insertions(+), 54 deletions(-)
Documentation/DocBook/drm.tmpl +10 -54
index 7df3134..4a0e932 100644
@@ -2648,8 +2648,8 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td rowspan="21" valign="top" >i915</td>
-	<td rowspan="3" valign="top" >Generic</td>
+	<td rowspan="20" valign="top" >i915</td>
+	<td rowspan="2" valign="top" >Generic</td>
 	<td valign="top" >"Broadcast RGB"</td>
 	<td valign="top" >ENUM</td>
 	<td valign="top" >{ "Automatic", "Full", "Limited 16:235" }</td>
@@ -2664,13 +2664,6 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td valign="top" >Standard name as in DRM</td>
-	<td valign="top" >Standard type as in DRM</td>
-	<td valign="top" >Standard value as in DRM</td>
-	<td valign="top" >Standard Object as in DRM</td>
-	<td valign="top" >TBD</td>
-	</tr>
-	<tr>
 	<td rowspan="17" valign="top" >SDVO-TV</td>
 	<td valign="top" >“mode”</td>
 	<td valign="top" >ENUM</td>
@@ -2799,8 +2792,8 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td rowspan="3" valign="top" >CDV gma-500</td>
-	<td rowspan="3" valign="top" >Generic</td>
+	<td rowspan="2" valign="top" >CDV gma-500</td>
+	<td rowspan="2" valign="top" >Generic</td>
 	<td valign="top" >"Broadcast RGB"</td>
 	<td valign="top" >ENUM</td>
 	<td valign="top" >{ “Full”, “Limited 16:235” }</td>
@@ -2815,15 +2808,8 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td valign="top" >Standard name as in DRM</td>
-	<td valign="top" >Standard type as in DRM</td>
-	<td valign="top" >Standard value as in DRM</td>
-	<td valign="top" >Standard Object as in DRM</td>
-	<td valign="top" >TBD</td>
-	</tr>
-	<tr>
-	<td rowspan="20" valign="top" >Poulsbo</td>
-	<td rowspan="2" valign="top" >Generic</td>
+	<td rowspan="19" valign="top" >Poulsbo</td>
+	<td rowspan="1" valign="top" >Generic</td>
 	<td valign="top" >“backlight”</td>
 	<td valign="top" >RANGE</td>
 	<td valign="top" >Min=0, Max=100</td>
@@ -2831,13 +2817,6 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td valign="top" >Standard name as in DRM</td>
-	<td valign="top" >Standard type as in DRM</td>
-	<td valign="top" >Standard value as in DRM</td>
-	<td valign="top" >Standard Object as in DRM</td>
-	<td valign="top" >TBD</td>
-	</tr>
-	<tr>
 	<td rowspan="17" valign="top" >SDVO-TV</td>
 	<td valign="top" >“mode”</td>
 	<td valign="top" >ENUM</td>
@@ -3064,7 +3043,7 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td rowspan="3" valign="top" >i2c/ch7006_drv</td>
+	<td rowspan="2" valign="top" >i2c/ch7006_drv</td>
 	<td valign="top" >Generic</td>
 	<td valign="top" >“scale”</td>
 	<td valign="top" >RANGE</td>
@@ -3073,14 +3052,7 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td rowspan="2" valign="top" >TV</td>
-	<td valign="top" >Standard names as in DRM</td>
-	<td valign="top" >Standard types as in DRM</td>
-	<td valign="top" >Standard Values as in DRM</td>
-	<td valign="top" >Standard object as in DRM</td>
-	<td valign="top" >TBD</td>
-	</tr>
-	<tr>
+	<td rowspan="1" valign="top" >TV</td>
 	<td valign="top" >“mode”</td>
 	<td valign="top" >ENUM</td>
 	<td valign="top" >{ "PAL", "PAL-M","PAL-N"}, ”PAL-Nc"
@@ -3089,7 +3061,7 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td rowspan="16" valign="top" >nouveau</td>
+	<td rowspan="15" valign="top" >nouveau</td>
 	<td rowspan="6" valign="top" >NV10 Overlay</td>
 	<td valign="top" >"colorkey"</td>
 	<td valign="top" >RANGE</td>
@@ -3198,14 +3170,6 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td valign="top" >Generic</td>
-	<td valign="top" >Standard name as in DRM</td>
-	<td valign="top" >Standard type as in DRM</td>
-	<td valign="top" >Standard value as in DRM</td>
-	<td valign="top" >Standard Object as in DRM</td>
-	<td valign="top" >TBD</td>
-	</tr>
-	<tr>
 	<td rowspan="2" valign="top" >omap</td>
 	<td rowspan="2" valign="top" >Generic</td>
 	<td valign="top" >“rotation”</td>
@@ -3236,7 +3200,7 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td rowspan="10" valign="top" >radeon</td>
+	<td rowspan="9" valign="top" >radeon</td>
 	<td valign="top" >DVI-I</td>
 	<td valign="top" >“coherent”</td>
 	<td valign="top" >RANGE</td>
@@ -3308,14 +3272,6 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td valign="top" >Generic</td>
-	<td valign="top" >Standard name as in DRM</td>
-	<td valign="top" >Standard type as in DRM</td>
-	<td valign="top" >Standard value as in DRM</td>
-	<td valign="top" >Standard Object as in DRM</td>
-	<td valign="top" >TBD</td>
-	</tr>
-	<tr>
 	<td rowspan="3" valign="top" >rcar-du</td>
 	<td rowspan="3" valign="top" >Generic</td>
 	<td valign="top" >"alpha"</td>
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#17 lore raw

PATCH v3 13/13 Documentation: drm: describing rotation property for i915

In reply to [email protected]

From: Sagar Kamble <[email protected]>

---
 Documentation/DocBook/drm.tmpl |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
Documentation/DocBook/drm.tmpl +9 -1
index 4a0e932..8ab1a05 100644
@@ -2648,7 +2648,7 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td rowspan="20" valign="top" >i915</td>
+	<td rowspan="21" valign="top" >i915</td>
 	<td rowspan="2" valign="top" >Generic</td>
 	<td valign="top" >"Broadcast RGB"</td>
 	<td valign="top" >ENUM</td>
@@ -2664,6 +2664,14 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
+	<td rowspan="1" valign="top" >Plane</td>
+	<td valign="top" >“rotation”</td>
+	<td valign="top" >BITMASK</td>
+	<td valign="top" >{ 0, "rotate-0" }, { 2, "rotate-180" }</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >TBD</td>
+	</tr>
+	<tr>
 	<td rowspan="17" valign="top" >SDVO-TV</td>
 	<td valign="top" >“mode”</td>
 	<td valign="top" >ENUM</td>
Signature · 6 lines
1.7.10.4

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx