Skip to contentSkip to conversation

Split a 7.1 device into 4 stereo devices

DISCUSSION Xavier Claessens 3 participants 3 messages Jul 8, 2014 – Jul 9, 2014

lore
Share & tools
lore
#0 lore raw

Hello,

I have a 7.1 sound device and speaker-test -c8 can output on each speaker. But what I would like to do is using it as 4 stereo devices so I could play different sounds on each of them.

Ideally I would like to avoid dmix and friends to be able to have gapless and bit-perfect output.

On IRC "debianuser" said it is possible with hdajackretask to make it appear as 4 different hw devices in "aplay -l" but we didn't succeed doing that. Anyone knows what configuration is needed for that?

Here is my setting:
http://www.alsa-project.org/db/?f=bf0744873d5e6d42d3adc0076c5f66189e9191b7

Regards,
Xavier Claessens.

#1 lore raw

08.07.2014 18:18, Xavier Claessens kirjoitti:

Quoted 10 lines

Hello,

I have a 7.1 sound device and speaker-test -c8 can output on each speaker. But what I would like to do is using it as 4 stereo devices so I could play different sounds on each of them.

Ideally I would like to avoid dmix and friends to be able to have gapless and bit-perfect output.

Quoted 6 lines

On IRC "debianuser" said it is possible with hdajackretask to make it appear as 4 different hw devices in "aplay -l" but we didn't succeed doing that. Anyone knows what configuration is needed for that?

Here is my setting:
http://www.alsa-project.org/db/?f=bf0744873d5e6d42d3adc0076c5f66189e9191b7

I guess this really belongs on alsa-user@ list, but oh well...

No idea about hdajackretask, but you can use e.g. "dshare" plugin.

Simple example below with 6ch split to three stereo devices, see documentation/Google for more information on options. You don't see the result in "aplay -l" but in "aplay -L".

pcm_slave.shared_dev {
        pcm "hw:CARD=PCH,DEV=7"
        channels 6
        rate 48000
}
pcm.kas {
        type dshare
        ipc_key 119922141
        slave shared_dev
        bindings {
                0 0
                1 1
        }
        hint.description "Channels 0 and 1"
}
pcm.mo {
        type dshare
        ipc_key 119922141
        slave shared_dev
        bindings {
                0 2
                1 3
        }
        hint.description "Channels 2 and 3"
}
pcm.foobar {
        type dshare
        ipc_key 119922141
        slave shared_dev
        bindings {
                0 4
                1 5
        }
        hint.description "Channels 4 and 5"
}
Signature · 1 line
Anssi Hannula
#2 lore raw
In reply to Xavier Claessens
Quoted 8 lines

I have a 7.1 sound device and speaker-test -c8 can output on each speaker. But what I would like to do is using it as 4 stereo devices so I could play different sounds on each of them.

Ideally I would like to avoid dmix and friends to be able to have gapless and bit-perfect output.

Quoted 7 lines

On IRC "debianuser" said it is possible with hdajackretask to make it appear as 4 different hw devices in "aplay -l" but we didn't succeed doing that. Anyone knows what configuration is needed for that?

Here is my setting:
http://www.alsa-project.org/db/?f=bf0744873d5e6d42d3adc0076c5f66189e9191b7

The easy way is to use jackd and alsa jack plugin

If you really need need four stereo devices, you need to customized snd_hda multiout_analog_open, snd_hda multiout_analog_prepare and snd_hda multiout_analog_cleanup similar to those alt_analog_capture_xxx function to use substream->number to provide four stereo devices

static const struct hda_pcm_stream pcm_analog_playback = { .substreams = 4,
.channels_min = 2,
.channels_max = 2,
/* NID is set in build_pcms */
.ops = {
.open = playback_pcm_open,
.close = playback_pcm_close,
.prepare = playback_pcm_prepare,
.cleanup = playback_pcm_cleanup
},
};

Since only those four retaskable jacks support HP, you may need to use input jacks if you want four headphones instead of four line out jackd