A question about hotplug and suspend-resume functionallity
Hi,
We are testing Intel Gigabit adapter driver (igb) under Fedora 20, kernel 3.14.4 for the following use-case:
(*) Adapter is connected to the PCIE slot
(*) We put the system under suspend by running pm-suspend from user-space (*) Remove the adapter from the PCIE slot
(*) Wake up the system
Currently, we got kernel panics and the system gets stuck.
My questions are -
1) in order to support hot-unplugging in igb driver, should I implement the check of device presence in igb_resume function?
2) After the system wakes up, I see in dmesg that the PCI device function igb refuses to change power state and remains in PCI power state D3. can I assume that after suspend-resume if the function remains in D3 and refuses to move to D1 then hot-unplug event has occured?
Thanks and BR,
Igor Bezukh
Quoted 11 lines · Igor Bezukh
Hi,
We are testing Intel Gigabit adapter driver (igb) under Fedora 20, kernel 3.14.4 for the following use-case:
(*) Adapter is connected to the PCIE slot
(*) We put the system under suspend by running pm-suspend from user-space (*) Remove the adapter from the PCIE slot
(*) Wake up the systemCurrently, we got kernel panics and the system gets stuck.
Not good, have you sent the kernel panic to the [email protected] mailing list and cc:ed the driver authors?
Quoted 6 lines
My questions are -
1) in order to support hot-unplugging in igb driver, should I implement the check of device presence inigb_resumefunction?2) After the system wakes up, I see in dmesg that the PCI device function igb refuses to change power state and remains in PCI power state D3. can I assume that after suspend-resume if the function remains in D3 and refuses to move to D1 then hot-unplug event has occured?
These questions would be best acked on the above list, the developers there should be able to help you out.
good luck,
greg k-h