rtc: Add pcf85063 support
PATCH 1/1 rtc: Add pcf85063 support
This is a patch to add support for the pcf85063 rtc chip
Signed-off-by Soeren Andersen <san at rosetechnology.dk>
--- Documentation/devicetree/bindings/i2c/trivial-devices.txt | 1 + drivers/rtc/Kconfig | 8 ++++++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-pcf85063.c | 204 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 214 insertions(+)
Documentation/devicetree/bindings/i2c/trivial-devices.txt +1 -0
@@ -69,6 +69,7 @@ nuvoton,npct501 i2c trusted platform module (TPM) nxp,pca9556 Octal SMBus and I2C registered interface nxp,pca9557 8-bit I2C-bus and SMBus I/O port with reset nxp,pcf8563 Real-time clock/calendar +nxp,pcf85063 Tiny Real-Time Clock ovti,ov5642 OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI and Embedded TrueFocus pericom,pt7c4338 Real-time Clock Module plx,pex8648 48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch
drivers/rtc/Kconfig +8 -0
@@ -373,6 +373,14 @@ config RTC_DRV_PCF8563 This driver can also be built as a module. If so, the module will be called rtc-pcf8563. +config RTC_DRV_PCF85063 + tristate "nxp PCF85063" + help + If you say yes here you get support for the PCF85063 RTC chip + + This driver can also be built as a module. If so, the module + will be called rtc-pcf85063. + config RTC_DRV_PCF8583 tristate "Philips PCF8583" help
drivers/rtc/Makefile +1 -0
@@ -93,6 +93,7 @@ obj-$(CONFIG_RTC_DRV_PCAP) += rtc-pcap.o obj-$(CONFIG_RTC_DRV_PCF2127) += rtc-pcf2127.o obj-$(CONFIG_RTC_DRV_PCF8523) += rtc-pcf8523.o obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o +obj-$(CONFIG_RTC_DRV_PCF85063) += rtc-pcf85063.o obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o obj-$(CONFIG_RTC_DRV_PCF2123) += rtc-pcf2123.o obj-$(CONFIG_RTC_DRV_PCF50633) += rtc-pcf50633.o
drivers/rtc/rtc-pcf85063.c new file +204 -0
204 lines not on this page · raw message