Skip to contentSkip to conversation

rcutorture: use bash shell for all the test scripts

PATCH Applied Pranith Kumar 3 participants 4 messages Jul 11, 2014 – Jul 13, 2014

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 rcutorture: use bash shell for all the test scripts

Some of the scripts encode a default /bin/sh shell. On systems which use dash as default shell, these scripts fail as they are bash scripts. I encountered this while testing the sprintf() changes on a Debian system where dash is the default shell.

This commit changes all such uses to use bash explicitly.

---
 tools/testing/selftests/rcutorture/bin/config2frag.sh      | 4 ++--
 tools/testing/selftests/rcutorture/bin/configcheck.sh      | 4 ++--
 tools/testing/selftests/rcutorture/bin/configinit.sh       | 4 ++--
 tools/testing/selftests/rcutorture/bin/kvm-build.sh        | 2 +-
 tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh | 2 +-
 tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh  | 2 +-
 tools/testing/selftests/rcutorture/bin/kvm-recheck.sh      | 2 +-
 tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh   | 2 +-
 tools/testing/selftests/rcutorture/bin/kvm.sh              | 2 +-
 tools/testing/selftests/rcutorture/bin/parse-build.sh      | 4 ++--
 tools/testing/selftests/rcutorture/bin/parse-console.sh    | 4 ++--
 tools/testing/selftests/rcutorture/bin/parse-torture.sh    | 4 ++--
 12 files changed, 18 insertions(+), 18 deletions(-)
tools/testing/selftests/rcutorture/bin/config2frag.sh +2 -2
index 9f9ffcd..4e394ef 100644
@@ -1,5 +1,5 @@
-#!/bin/sh
-# Usage: sh config2frag.sh < .config > configfrag
+#!/bin/bash
+# Usage: bash config2frag.sh < .config > configfrag
 #
 # Converts the "# CONFIG_XXX is not set" to "CONFIG_XXX=n" so that the
 # resulting file becomes a legitimate Kconfig fragment.
tools/testing/selftests/rcutorture/bin/configcheck.sh +2 -2
index d686537..6173ed5 100755
@@ -1,5 +1,5 @@
-#!/bin/sh
-# Usage: sh configcheck.sh .config .config-template
+#!/bin/bash
+# Usage: bash configcheck.sh .config .config-template
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/configinit.sh +2 -2
index 9c3f3d3..d8f7418 100755
@@ -1,6 +1,6 @@
-#!/bin/sh
+#!/bin/bash
 #
-# sh configinit.sh config-spec-file [ build output dir ]
+# bash configinit.sh config-spec-file [ build output dir ]
 #
 # Create a .config file from the spec file.  Run from the kernel source tree.
 # Exits with 0 if all went well, with 1 if all went well but the config
tools/testing/selftests/rcutorture/bin/kvm-build.sh +1 -1
index 7c1e56b..e4bfb91 100755
@@ -2,7 +2,7 @@
 #
 # Build a kvm-ready Linux kernel from the tree in the current directory.
 #
-# Usage: sh kvm-build.sh config-template build-dir more-configs
+# Usage: bash kvm-build.sh config-template build-dir more-configs
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh +1 -1
index 7f1ff1a..30cbb63 100755
@@ -2,7 +2,7 @@
 #
 # Analyze a given results directory for locktorture progress.
 #
-# Usage: sh kvm-recheck-lock.sh resdir
+# Usage: bash kvm-recheck-lock.sh resdir
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh +1 -1
index 307c4b9..6e94a5e 100755
@@ -2,7 +2,7 @@
 #
 # Analyze a given results directory for rcutorture progress.
 #
-# Usage: sh kvm-recheck-rcu.sh resdir
+# Usage: bash kvm-recheck-rcu.sh resdir
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/kvm-recheck.sh +1 -1
index 3f6c9b7..3482b3f 100755
@@ -4,7 +4,7 @@
 # check the build and console output for errors.  Given a directory
 # containing results directories, this recursively checks them all.
 #
-# Usage: sh kvm-recheck.sh resdir ...
+# Usage: bash kvm-recheck.sh resdir ...
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh +1 -1
index 0f69dcb..5c265da 100755
@@ -6,7 +6,7 @@
 # Execute this in the source tree.  Do not run it as a background task
 # because qemu does not seem to like that much.
 #
-# Usage: sh kvm-test-1-run.sh config builddir resdir minutes qemu-args boot_args
+# Usage: bash kvm-test-1-run.sh config builddir resdir minutes qemu-args boot_args
 #
 # qemu-args defaults to "-nographic", along with arguments specifying the
 #			number of CPUs and other options generated from
tools/testing/selftests/rcutorture/bin/kvm.sh +1 -1
index 589e9c3..ff147ad 100644
@@ -7,7 +7,7 @@
 # Edit the definitions below to set the locations of the various directories,
 # as well as the test duration.
 #
-# Usage: sh kvm.sh [ options ]
+# Usage: bash kvm.sh [ options ]
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/parse-build.sh +2 -2
index 5432309..41eeeef 100755
@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 #
 # Check the build output from an rcutorture run for goodness.
 # The "file" is a pathname on the local system, and "title" is
@@ -7,7 +7,7 @@
 # The file must contain kernel build output.
 #
 # Usage:
-#	sh parse-build.sh file title
+#	bash parse-build.sh file title
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/parse-console.sh +2 -2
index 4185d4c..2517eae 100755
@@ -1,11 +1,11 @@
-#!/bin/sh
+#!/bin/bash
 #
 # Check the console output from an rcutorture run for oopses.
 # The "file" is a pathname on the local system, and "title" is
 # a text string for error-message purposes.
 #
 # Usage:
-#	sh parse-console.sh file title
+#	bash parse-console.sh file title
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/parse-torture.sh +2 -2
index 3455560..bbec40b 100755
@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 #
 # Check the console output from a torture run for goodness.
 # The "file" is a pathname on the local system, and "title" is
@@ -8,7 +8,7 @@
 # with other dmesg text, as in console-log output.
 #
 # Usage:
-#	sh parse-torture.sh file title
+#	bash parse-torture.sh file title
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
Signature · 1 line
1.9.1
maintainer Reviewed-by on v1 1/1
#1 lore raw
Quoted 6 lines · Pranith Kumar

Some of the scripts encode a default /bin/sh shell. On systems which use dash as default shell, these scripts fail as they are bash scripts. I encountered this while testing the sprintf() changes on a Debian system where dash is the default shell.

This commit changes all such uses to use bash explicitly.

Good catch.

Since these all have #! lines, can you please set the executable bit on any that don't have it set (looks like just config2frag.sh and kvm.sh), and then change the Usage lines to drop the shell entirely and just invoke the program directly?

Quoted 1 line

With the above changed (perhaps in a separate patch):

Quoted 188 lines
 tools/testing/selftests/rcutorture/bin/config2frag.sh      | 4 ++--
 tools/testing/selftests/rcutorture/bin/configcheck.sh      | 4 ++--
 tools/testing/selftests/rcutorture/bin/configinit.sh       | 4 ++--
 tools/testing/selftests/rcutorture/bin/kvm-build.sh        | 2 +-
 tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh | 2 +-
 tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh  | 2 +-
 tools/testing/selftests/rcutorture/bin/kvm-recheck.sh      | 2 +-
 tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh   | 2 +-
 tools/testing/selftests/rcutorture/bin/kvm.sh              | 2 +-
 tools/testing/selftests/rcutorture/bin/parse-build.sh      | 4 ++--
 tools/testing/selftests/rcutorture/bin/parse-console.sh    | 4 ++--
 tools/testing/selftests/rcutorture/bin/parse-torture.sh    | 4 ++--
 12 files changed, 18 insertions(+), 18 deletions(-)
tools/testing/selftests/rcutorture/bin/config2frag.sh +2 -2
index 9f9ffcd..4e394ef 100644
@@ -1,5 +1,5 @@
-#!/bin/sh
-# Usage: sh config2frag.sh < .config > configfrag
+#!/bin/bash
+# Usage: bash config2frag.sh < .config > configfrag
 #
 # Converts the "# CONFIG_XXX is not set" to "CONFIG_XXX=n" so that the
 # resulting file becomes a legitimate Kconfig fragment.
tools/testing/selftests/rcutorture/bin/configcheck.sh +2 -2
index d686537..6173ed5 100755
@@ -1,5 +1,5 @@
-#!/bin/sh
-# Usage: sh configcheck.sh .config .config-template
+#!/bin/bash
+# Usage: bash configcheck.sh .config .config-template
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/configinit.sh +2 -2
index 9c3f3d3..d8f7418 100755
@@ -1,6 +1,6 @@
-#!/bin/sh
+#!/bin/bash
 #
-# sh configinit.sh config-spec-file [ build output dir ]
+# bash configinit.sh config-spec-file [ build output dir ]
 #
 # Create a .config file from the spec file.  Run from the kernel source tree.
 # Exits with 0 if all went well, with 1 if all went well but the config
tools/testing/selftests/rcutorture/bin/kvm-build.sh +1 -1
index 7c1e56b..e4bfb91 100755
@@ -2,7 +2,7 @@
 #
 # Build a kvm-ready Linux kernel from the tree in the current directory.
 #
-# Usage: sh kvm-build.sh config-template build-dir more-configs
+# Usage: bash kvm-build.sh config-template build-dir more-configs
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh +1 -1
index 7f1ff1a..30cbb63 100755
@@ -2,7 +2,7 @@
 #
 # Analyze a given results directory for locktorture progress.
 #
-# Usage: sh kvm-recheck-lock.sh resdir
+# Usage: bash kvm-recheck-lock.sh resdir
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh +1 -1
index 307c4b9..6e94a5e 100755
@@ -2,7 +2,7 @@
 #
 # Analyze a given results directory for rcutorture progress.
 #
-# Usage: sh kvm-recheck-rcu.sh resdir
+# Usage: bash kvm-recheck-rcu.sh resdir
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/kvm-recheck.sh +1 -1
index 3f6c9b7..3482b3f 100755
@@ -4,7 +4,7 @@
 # check the build and console output for errors.  Given a directory
 # containing results directories, this recursively checks them all.
 #
-# Usage: sh kvm-recheck.sh resdir ...
+# Usage: bash kvm-recheck.sh resdir ...
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh +1 -1
index 0f69dcb..5c265da 100755
@@ -6,7 +6,7 @@
 # Execute this in the source tree.  Do not run it as a background task
 # because qemu does not seem to like that much.
 #
-# Usage: sh kvm-test-1-run.sh config builddir resdir minutes qemu-args boot_args
+# Usage: bash kvm-test-1-run.sh config builddir resdir minutes qemu-args boot_args
 #
 # qemu-args defaults to "-nographic", along with arguments specifying the
 #			number of CPUs and other options generated from
tools/testing/selftests/rcutorture/bin/kvm.sh +1 -1
index 589e9c3..ff147ad 100644
@@ -7,7 +7,7 @@
 # Edit the definitions below to set the locations of the various directories,
 # as well as the test duration.
 #
-# Usage: sh kvm.sh [ options ]
+# Usage: bash kvm.sh [ options ]
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/parse-build.sh +2 -2
index 5432309..41eeeef 100755
@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 #
 # Check the build output from an rcutorture run for goodness.
 # The "file" is a pathname on the local system, and "title" is
@@ -7,7 +7,7 @@
 # The file must contain kernel build output.
 #
 # Usage:
-#	sh parse-build.sh file title
+#	bash parse-build.sh file title
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/parse-console.sh +2 -2
index 4185d4c..2517eae 100755
@@ -1,11 +1,11 @@
-#!/bin/sh
+#!/bin/bash
 #
 # Check the console output from an rcutorture run for oopses.
 # The "file" is a pathname on the local system, and "title" is
 # a text string for error-message purposes.
 #
 # Usage:
-#	sh parse-console.sh file title
+#	bash parse-console.sh file title
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/parse-torture.sh +2 -2
index 3455560..bbec40b 100755
@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 #
 # Check the console output from a torture run for goodness.
 # The "file" is a pathname on the local system, and "title" is
@@ -8,7 +8,7 @@
 # with other dmesg text, as in console-log output.
 #
 # Usage:
-#	sh parse-torture.sh file title
+#	bash parse-torture.sh file title
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
Signature · 1 line
1.9.1
#2 lore raw
Quoted 6 lines · On Fri, Jul 11, 2014 at 7:23 PM, <[email protected]> wrote:
Quoted 5 lines · Pranith Kumar

Some of the scripts encode a default /bin/sh shell. On systems which use dash as default shell, these scripts fail as they are bash scripts. I encountered this while testing the sprintf() changes on a Debian system where dash is the default shell.

Quoted 8 lines
Quoted 1 line

This commit changes all such uses to use bash explicitly.

Good catch.

Since these all have #! lines, can you please set the executable bit on any that don't have it set (looks like just config2frag.sh and kvm.sh), and then change the Usage lines to drop the shell entirely and just invoke the program directly?

OK. I will send that as a separate patch.

Quoted 194 lines
Quoted 2 lines

With the above changed (perhaps in a separate patch):

Quoted 188 lines
 tools/testing/selftests/rcutorture/bin/config2frag.sh      | 4 ++--
 tools/testing/selftests/rcutorture/bin/configcheck.sh      | 4 ++--
 tools/testing/selftests/rcutorture/bin/configinit.sh       | 4 ++--
 tools/testing/selftests/rcutorture/bin/kvm-build.sh        | 2 +-
 tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh | 2 +-
 tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh  | 2 +-
 tools/testing/selftests/rcutorture/bin/kvm-recheck.sh      | 2 +-
 tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh   | 2 +-
 tools/testing/selftests/rcutorture/bin/kvm.sh              | 2 +-
 tools/testing/selftests/rcutorture/bin/parse-build.sh      | 4 ++--
 tools/testing/selftests/rcutorture/bin/parse-console.sh    | 4 ++--
 tools/testing/selftests/rcutorture/bin/parse-torture.sh    | 4 ++--
 12 files changed, 18 insertions(+), 18 deletions(-)
tools/testing/selftests/rcutorture/bin/config2frag.sh +2 -2
index 9f9ffcd..4e394ef 100644
@@ -1,5 +1,5 @@
-#!/bin/sh
-# Usage: sh config2frag.sh < .config > configfrag
+#!/bin/bash
+# Usage: bash config2frag.sh < .config > configfrag
 #
 # Converts the "# CONFIG_XXX is not set" to "CONFIG_XXX=n" so that the
 # resulting file becomes a legitimate Kconfig fragment.
tools/testing/selftests/rcutorture/bin/configcheck.sh +2 -2
index d686537..6173ed5 100755
@@ -1,5 +1,5 @@
-#!/bin/sh
-# Usage: sh configcheck.sh .config .config-template
+#!/bin/bash
+# Usage: bash configcheck.sh .config .config-template
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/configinit.sh +2 -2
index 9c3f3d3..d8f7418 100755
@@ -1,6 +1,6 @@
-#!/bin/sh
+#!/bin/bash
 #
-# sh configinit.sh config-spec-file [ build output dir ]
+# bash configinit.sh config-spec-file [ build output dir ]
 #
 # Create a .config file from the spec file.  Run from the kernel source tree.
 # Exits with 0 if all went well, with 1 if all went well but the config
tools/testing/selftests/rcutorture/bin/kvm-build.sh +1 -1
index 7c1e56b..e4bfb91 100755
@@ -2,7 +2,7 @@
 #
 # Build a kvm-ready Linux kernel from the tree in the current directory.
 #
-# Usage: sh kvm-build.sh config-template build-dir more-configs
+# Usage: bash kvm-build.sh config-template build-dir more-configs
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh +1 -1
index 7f1ff1a..30cbb63 100755
@@ -2,7 +2,7 @@
 #
 # Analyze a given results directory for locktorture progress.
 #
-# Usage: sh kvm-recheck-lock.sh resdir
+# Usage: bash kvm-recheck-lock.sh resdir
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh +1 -1
index 307c4b9..6e94a5e 100755
@@ -2,7 +2,7 @@
 #
 # Analyze a given results directory for rcutorture progress.
 #
-# Usage: sh kvm-recheck-rcu.sh resdir
+# Usage: bash kvm-recheck-rcu.sh resdir
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/kvm-recheck.sh +1 -1
index 3f6c9b7..3482b3f 100755
@@ -4,7 +4,7 @@
 # check the build and console output for errors.  Given a directory
 # containing results directories, this recursively checks them all.
 #
-# Usage: sh kvm-recheck.sh resdir ...
+# Usage: bash kvm-recheck.sh resdir ...
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh +1 -1
index 0f69dcb..5c265da 100755
@@ -6,7 +6,7 @@
 # Execute this in the source tree.  Do not run it as a background task
 # because qemu does not seem to like that much.
 #
-# Usage: sh kvm-test-1-run.sh config builddir resdir minutes qemu-args boot_args
+# Usage: bash kvm-test-1-run.sh config builddir resdir minutes qemu-args boot_args
 #
 # qemu-args defaults to "-nographic", along with arguments specifying the
 #                    number of CPUs and other options generated from
tools/testing/selftests/rcutorture/bin/kvm.sh +1 -1
index 589e9c3..ff147ad 100644
@@ -7,7 +7,7 @@
 # Edit the definitions below to set the locations of the various directories,
 # as well as the test duration.
 #
-# Usage: sh kvm.sh [ options ]
+# Usage: bash kvm.sh [ options ]
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/parse-build.sh +2 -2
index 5432309..41eeeef 100755
@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 #
 # Check the build output from an rcutorture run for goodness.
 # The "file" is a pathname on the local system, and "title" is
@@ -7,7 +7,7 @@
 # The file must contain kernel build output.
 #
 # Usage:
-#    sh parse-build.sh file title
+#    bash parse-build.sh file title
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/parse-console.sh +2 -2
index 4185d4c..2517eae 100755
@@ -1,11 +1,11 @@
-#!/bin/sh
+#!/bin/bash
 #
 # Check the console output from an rcutorture run for oopses.
 # The "file" is a pathname on the local system, and "title" is
 # a text string for error-message purposes.
 #
 # Usage:
-#    sh parse-console.sh file title
+#    bash parse-console.sh file title
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/parse-torture.sh +2 -3
index 3455560..bbec40b 100755
@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 #
 # Check the console output from a torture run for goodness.
 # The "file" is a pathname on the local system, and "title" is
@@ -8,7 +8,7 @@
 # with other dmesg text, as in console-log output.
 #
 # Usage:
-#    sh parse-torture.sh file title
+#    bash parse-torture.sh file title
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
--

1.9.1

Signature · 1 line
Pranith
#3 lore raw
In reply to Pranith Kumar
Quoted 8 lines · Pranith Kumar

Some of the scripts encode a default /bin/sh shell. On systems which use dash as default shell, these scripts fail as they are bash scripts. I encountered this while testing the sprintf() changes on a Debian system where dash is the default shell.

This commit changes all such uses to use bash explicitly.

Queued with Josh's Reviewed-by, thank you both!

One nit: In the future, please capitalize the word following the ":" in the subject line. So, instead of:

[PATCH 1/1] rcutorture: use bash shell for all the test scripts

Write:

[PATCH 1/1] rcutorture: Use bash shell for all the test scripts

I fixed this one and will fix your later permissions patch, but again, please use this convention in future patches.

Thanx, Paul

Quoted 189 lines
---
 tools/testing/selftests/rcutorture/bin/config2frag.sh      | 4 ++--
 tools/testing/selftests/rcutorture/bin/configcheck.sh      | 4 ++--
 tools/testing/selftests/rcutorture/bin/configinit.sh       | 4 ++--
 tools/testing/selftests/rcutorture/bin/kvm-build.sh        | 2 +-
 tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh | 2 +-
 tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh  | 2 +-
 tools/testing/selftests/rcutorture/bin/kvm-recheck.sh      | 2 +-
 tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh   | 2 +-
 tools/testing/selftests/rcutorture/bin/kvm.sh              | 2 +-
 tools/testing/selftests/rcutorture/bin/parse-build.sh      | 4 ++--
 tools/testing/selftests/rcutorture/bin/parse-console.sh    | 4 ++--
 tools/testing/selftests/rcutorture/bin/parse-torture.sh    | 4 ++--
 12 files changed, 18 insertions(+), 18 deletions(-)
tools/testing/selftests/rcutorture/bin/config2frag.sh +2 -2
index 9f9ffcd..4e394ef 100644
@@ -1,5 +1,5 @@
-#!/bin/sh
-# Usage: sh config2frag.sh < .config > configfrag
+#!/bin/bash
+# Usage: bash config2frag.sh < .config > configfrag
 #
 # Converts the "# CONFIG_XXX is not set" to "CONFIG_XXX=n" so that the
 # resulting file becomes a legitimate Kconfig fragment.
tools/testing/selftests/rcutorture/bin/configcheck.sh +2 -2
index d686537..6173ed5 100755
@@ -1,5 +1,5 @@
-#!/bin/sh
-# Usage: sh configcheck.sh .config .config-template
+#!/bin/bash
+# Usage: bash configcheck.sh .config .config-template
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/configinit.sh +2 -2
index 9c3f3d3..d8f7418 100755
@@ -1,6 +1,6 @@
-#!/bin/sh
+#!/bin/bash
 #
-# sh configinit.sh config-spec-file [ build output dir ]
+# bash configinit.sh config-spec-file [ build output dir ]
 #
 # Create a .config file from the spec file.  Run from the kernel source tree.
 # Exits with 0 if all went well, with 1 if all went well but the config
tools/testing/selftests/rcutorture/bin/kvm-build.sh +1 -1
index 7c1e56b..e4bfb91 100755
@@ -2,7 +2,7 @@
 #
 # Build a kvm-ready Linux kernel from the tree in the current directory.
 #
-# Usage: sh kvm-build.sh config-template build-dir more-configs
+# Usage: bash kvm-build.sh config-template build-dir more-configs
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh +1 -1
index 7f1ff1a..30cbb63 100755
@@ -2,7 +2,7 @@
 #
 # Analyze a given results directory for locktorture progress.
 #
-# Usage: sh kvm-recheck-lock.sh resdir
+# Usage: bash kvm-recheck-lock.sh resdir
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh +1 -1
index 307c4b9..6e94a5e 100755
@@ -2,7 +2,7 @@
 #
 # Analyze a given results directory for rcutorture progress.
 #
-# Usage: sh kvm-recheck-rcu.sh resdir
+# Usage: bash kvm-recheck-rcu.sh resdir
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/kvm-recheck.sh +1 -1
index 3f6c9b7..3482b3f 100755
@@ -4,7 +4,7 @@
 # check the build and console output for errors.  Given a directory
 # containing results directories, this recursively checks them all.
 #
-# Usage: sh kvm-recheck.sh resdir ...
+# Usage: bash kvm-recheck.sh resdir ...
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh +1 -1
index 0f69dcb..5c265da 100755
@@ -6,7 +6,7 @@
 # Execute this in the source tree.  Do not run it as a background task
 # because qemu does not seem to like that much.
 #
-# Usage: sh kvm-test-1-run.sh config builddir resdir minutes qemu-args boot_args
+# Usage: bash kvm-test-1-run.sh config builddir resdir minutes qemu-args boot_args
 #
 # qemu-args defaults to "-nographic", along with arguments specifying the
 #			number of CPUs and other options generated from
tools/testing/selftests/rcutorture/bin/kvm.sh +1 -1
index 589e9c3..ff147ad 100644
@@ -7,7 +7,7 @@
 # Edit the definitions below to set the locations of the various directories,
 # as well as the test duration.
 #
-# Usage: sh kvm.sh [ options ]
+# Usage: bash kvm.sh [ options ]
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/parse-build.sh +2 -2
index 5432309..41eeeef 100755
@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 #
 # Check the build output from an rcutorture run for goodness.
 # The "file" is a pathname on the local system, and "title" is
@@ -7,7 +7,7 @@
 # The file must contain kernel build output.
 #
 # Usage:
-#	sh parse-build.sh file title
+#	bash parse-build.sh file title
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/parse-console.sh +2 -2
index 4185d4c..2517eae 100755
@@ -1,11 +1,11 @@
-#!/bin/sh
+#!/bin/bash
 #
 # Check the console output from an rcutorture run for oopses.
 # The "file" is a pathname on the local system, and "title" is
 # a text string for error-message purposes.
 #
 # Usage:
-#	sh parse-console.sh file title
+#	bash parse-console.sh file title
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
tools/testing/selftests/rcutorture/bin/parse-torture.sh +2 -2
index 3455560..bbec40b 100755
@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 #
 # Check the console output from a torture run for goodness.
 # The "file" is a pathname on the local system, and "title" is
@@ -8,7 +8,7 @@
 # with other dmesg text, as in console-log output.
 #
 # Usage:
-#	sh parse-torture.sh file title
+#	bash parse-torture.sh file title
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
Signature · 1 line
1.9.1