Skip to contentSkip to conversation

x86: fix kernel crash on boot due to NULL dereference

PATCH Superseded Andy Shevchenko 4 participants 5 messages Jul 17, 2014 – Jul 21, 2014 x86

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 x86: fix kernel crash on boot due to NULL dereference

The patch "x86, irq: Count legacy IRQs by legacy_pic->nr_legacy_irqs instead of NR_IRQS_LEGACY" (linux-next commit 95d76acc7518d566df18d67c1343bb375b78d1f3) removed reserved interrupts for the platforms that do not have a legacy IOAPIC. Meanwhile it breks a boot on Intel MID platforms such as Medfield.

[    0.000000] BUG: unable to handle kernel NULL pointer dereference at 0000003a
[    0.000000] IP: [<c107079a>] setup_irq+0xf/0x4d
[    0.000000] *pdpt = 0000000000000000 *pde = 9bbf32453167e510
[    0.000000] Oops: 0000 [#1] PREEMPT SMP
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.0-rc5-next-20140717-00043-g6ab7e8d-dirty #497
[    0.000000] task: c184bc80 ti: c183e000 task.ti: c183e000
[    0.000000] EIP: 0060:[<c107079a>] EFLAGS: 00210046 CPU: 0
[    0.000000] EIP is at setup_irq+0xf/0x4d
[    0.000000] EAX: 00000000 EBX: 00000002 ECX: 00000000 EDX: 00000002
[    0.000000] ESI: 000000d5 EDI: c184e280 EBP: c183ffc0 ESP: c183ffb4
[    0.000000]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[    0.000000] CR0: 8005003b CR2: 0000003a CR3: 0195b000 CR4: 000006b0
[    0.000000] Stack:
[    0.000000]  00000100 000000d5 c195c800 c183ffd0 c18eff07 c1935100 00010800 c183ffd8
[    0.000000]  c18efca0 c183ffe8 c18ec92e c1935100 00020800 c183fff8 c18ec2b4 00020800
[    0.000000]  c195c800 025e5003 00000000
[    0.000000] Call Trace:
[    0.000000]  [<c18eff07>] native_init_IRQ+0x265/0x273
[    0.000000]  [<c18efca0>] init_IRQ+0x2c/0x2e
[    0.000000]  [<c18ec92e>] start_kernel+0x1e4/0x32a
[    0.000000]  [<c18ec2b4>] i386_start_kernel+0x82/0x86
[    0.000000] Code: eb 05 bf ea ff ff ff 8b 83 c4 00 00 00 e8 f6 a3 01 00 8d 65 f4 89 f8 5b 5e 5f 5d c3 55 89 e5 57 89 d7 56 53 89 c3 e8 4b e4 ff ff <f6> 40 3a 02 89 c6 74 16 b8 2b 3e 77 c1 ba 0a 05 00 00 e8 83 60
[    0.000000] EIP: [<c107079a>] setup_irq+0xf/0x4d SS:ESP 0068:c183ffb4
[    0.000000] CR2: 000000000000003a
[    0.000000] ---[ end trace cb88537fdc8fa200 ]---
[    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[    0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!

The culprit is an uncoditional setting of the IRQ2 which is used as cascade IRQ on legacy platforms. It seems we have to check if we have enough legacy IRQs reserved before we can call setup_irq().

The proposed patch adds such check.

---
 arch/x86/kernel/irqinit.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/irqinit.c +1 -1
index 1e6cff5..44f1ed4 100644
@@ -203,7 +203,7 @@ void __init native_init_IRQ(void)
 		set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]);
 	}
 
-	if (!acpi_ioapic && !of_ioapic)
+	if (!acpi_ioapic && !of_ioapic && nr_legacy_irqs())
 		setup_irq(2, &irq2);
 
 #ifdef CONFIG_X86_32
Signature · 1 line
2.0.1
#1 lore raw

Hi Andy,

Thanks for the patch.

Quoted 4 lines · Andy Shevchenko

The patch "x86, irq: Count legacy IRQs by legacy_pic->nr_legacy_irqs instead of NR_IRQS_LEGACY" (linux-next commit 95d76acc7518d566df18d67c1343bb375b78d1f3) removed reserved interrupts for the platforms that do not have a legacy IOAPIC. Meanwhile it breks a boot on Intel MID platforms such as Medfield.

Have you tested it against Merrifield?

Br, David

Quoted 57 lines
[    0.000000] BUG: unable to handle kernel NULL pointer dereference at 0000003a
[    0.000000] IP: [<c107079a>] setup_irq+0xf/0x4d
[    0.000000] *pdpt = 0000000000000000 *pde = 9bbf32453167e510
[    0.000000] Oops: 0000 [#1] PREEMPT SMP
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.0-rc5-next-20140717-00043-g6ab7e8d-dirty #497
[    0.000000] task: c184bc80 ti: c183e000 task.ti: c183e000
[    0.000000] EIP: 0060:[<c107079a>] EFLAGS: 00210046 CPU: 0
[    0.000000] EIP is at setup_irq+0xf/0x4d
[    0.000000] EAX: 00000000 EBX: 00000002 ECX: 00000000 EDX: 00000002
[    0.000000] ESI: 000000d5 EDI: c184e280 EBP: c183ffc0 ESP: c183ffb4
[    0.000000]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[    0.000000] CR0: 8005003b CR2: 0000003a CR3: 0195b000 CR4: 000006b0
[    0.000000] Stack:
[    0.000000]  00000100 000000d5 c195c800 c183ffd0 c18eff07 c1935100 00010800 c183ffd8
[    0.000000]  c18efca0 c183ffe8 c18ec92e c1935100 00020800 c183fff8 c18ec2b4 00020800
[    0.000000]  c195c800 025e5003 00000000
[    0.000000] Call Trace:
[    0.000000]  [<c18eff07>] native_init_IRQ+0x265/0x273
[    0.000000]  [<c18efca0>] init_IRQ+0x2c/0x2e
[    0.000000]  [<c18ec92e>] start_kernel+0x1e4/0x32a
[    0.000000]  [<c18ec2b4>] i386_start_kernel+0x82/0x86
[    0.000000] Code: eb 05 bf ea ff ff ff 8b 83 c4 00 00 00 e8 f6 a3 01 00 8d 65 f4 89 f8 5b 5e 5f 5d c3 55 89 e5 57 89 d7 56 53 89 c3 e8 4b e4 ff ff <f6> 40 3a 02 89 c6 74 16 b8 2b 3e 77 c1 ba 0a 05 00 00 e8 83 60
[    0.000000] EIP: [<c107079a>] setup_irq+0xf/0x4d SS:ESP 0068:c183ffb4
[    0.000000] CR2: 000000000000003a
[    0.000000] ---[ end trace cb88537fdc8fa200 ]---
[    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[    0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!

The culprit is an uncoditional setting of the IRQ2 which is used as cascade IRQ on legacy platforms. It seems we have to check if we have enough legacy IRQs reserved before we can call setup_irq().

The proposed patch adds such check.

---
 arch/x86/kernel/irqinit.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/irqinit.c +1 -1
index 1e6cff5..44f1ed4 100644
@@ -203,7 +203,7 @@ void __init native_init_IRQ(void)
 		set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]);
 	}
 
-	if (!acpi_ioapic && !of_ioapic)
+	if (!acpi_ioapic && !of_ioapic && nr_legacy_irqs())
 		setup_irq(2, &irq2);
 
 #ifdef CONFIG_X86_32
Signature · 1 line
2.0.1
#2 lore raw
Quoted 11 lines · David Cohen

Hi Andy,

Thanks for the patch.

Quoted 4 lines · Andy Shevchenko

The patch "x86, irq: Count legacy IRQs by legacy_pic->nr_legacy_irqs instead of NR_IRQS_LEGACY" (linux-next commit 95d76acc7518d566df18d67c1343bb375b78d1f3) removed reserved interrupts for the platforms that do not have a legacy IOAPIC. Meanwhile it breks a boot on Intel MID platforms such as Medfield.

Have you tested it against Merrifield?

No, I have only Medfield device around me. If you can do that on Merrifield I will appreciate your Tested-by tag.

Quoted 65 lines

Br, David

Quoted 55 lines
[    0.000000] BUG: unable to handle kernel NULL pointer dereference at 0000003a
[    0.000000] IP: [<c107079a>] setup_irq+0xf/0x4d
[    0.000000] *pdpt = 0000000000000000 *pde = 9bbf32453167e510
[    0.000000] Oops: 0000 [#1] PREEMPT SMP
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.0-rc5-next-20140717-00043-g6ab7e8d-dirty #497
[    0.000000] task: c184bc80 ti: c183e000 task.ti: c183e000
[    0.000000] EIP: 0060:[<c107079a>] EFLAGS: 00210046 CPU: 0
[    0.000000] EIP is at setup_irq+0xf/0x4d
[    0.000000] EAX: 00000000 EBX: 00000002 ECX: 00000000 EDX: 00000002
[    0.000000] ESI: 000000d5 EDI: c184e280 EBP: c183ffc0 ESP: c183ffb4
[    0.000000]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[    0.000000] CR0: 8005003b CR2: 0000003a CR3: 0195b000 CR4: 000006b0
[    0.000000] Stack:
[    0.000000]  00000100 000000d5 c195c800 c183ffd0 c18eff07 c1935100 00010800 c183ffd8
[    0.000000]  c18efca0 c183ffe8 c18ec92e c1935100 00020800 c183fff8 c18ec2b4 00020800
[    0.000000]  c195c800 025e5003 00000000
[    0.000000] Call Trace:
[    0.000000]  [<c18eff07>] native_init_IRQ+0x265/0x273
[    0.000000]  [<c18efca0>] init_IRQ+0x2c/0x2e
[    0.000000]  [<c18ec92e>] start_kernel+0x1e4/0x32a
[    0.000000]  [<c18ec2b4>] i386_start_kernel+0x82/0x86
[    0.000000] Code: eb 05 bf ea ff ff ff 8b 83 c4 00 00 00 e8 f6 a3 01 00 8d 65 f4 89 f8 5b 5e 5f 5d c3 55 89 e5 57 89 d7 56 53 89 c3 e8 4b e4 ff ff <f6> 40 3a 02 89 c6 74 16 b8 2b 3e 77 c1 ba 0a 05 00 00 e8 83 60
[    0.000000] EIP: [<c107079a>] setup_irq+0xf/0x4d SS:ESP 0068:c183ffb4
[    0.000000] CR2: 000000000000003a
[    0.000000] ---[ end trace cb88537fdc8fa200 ]---
[    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[    0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!

The culprit is an uncoditional setting of the IRQ2 which is used as cascade IRQ on legacy platforms. It seems we have to check if we have enough legacy IRQs reserved before we can call setup_irq().

The proposed patch adds such check.

---
 arch/x86/kernel/irqinit.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/irqinit.c +1 -2
index 1e6cff5..44f1ed4 100644
@@ -203,7 +203,7 @@ void __init native_init_IRQ(void)
              set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]);
      }
 
-     if (!acpi_ioapic && !of_ioapic)
+     if (!acpi_ioapic && !of_ioapic && nr_legacy_irqs())
              setup_irq(2, &irq2);
 
 #ifdef CONFIG_X86_32
--
Quoted 2 lines

2.0.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#3 lore raw
In reply to Andy Shevchenko

Hi Andy,
Have you encountered any issue with another call site of
setup_irq() in arch/x86/kernel/time.c?

	void __init setup_default_timer_irq(void)
	{
	        setup_irq(0, &irq0);
	}
	Seems it may need the same protection for system without

legacy IRQ controller.
Regards!
Gerry

Quoted 59 lines · Andy Shevchenko

The patch "x86, irq: Count legacy IRQs by legacy_pic->nr_legacy_irqs instead of NR_IRQS_LEGACY" (linux-next commit 95d76acc7518d566df18d67c1343bb375b78d1f3) removed reserved interrupts for the platforms that do not have a legacy IOAPIC. Meanwhile it breks a boot on Intel MID platforms such as Medfield.

[    0.000000] BUG: unable to handle kernel NULL pointer dereference at 0000003a
[    0.000000] IP: [<c107079a>] setup_irq+0xf/0x4d
[    0.000000] *pdpt = 0000000000000000 *pde = 9bbf32453167e510
[    0.000000] Oops: 0000 [#1] PREEMPT SMP
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.0-rc5-next-20140717-00043-g6ab7e8d-dirty #497
[    0.000000] task: c184bc80 ti: c183e000 task.ti: c183e000
[    0.000000] EIP: 0060:[<c107079a>] EFLAGS: 00210046 CPU: 0
[    0.000000] EIP is at setup_irq+0xf/0x4d
[    0.000000] EAX: 00000000 EBX: 00000002 ECX: 00000000 EDX: 00000002
[    0.000000] ESI: 000000d5 EDI: c184e280 EBP: c183ffc0 ESP: c183ffb4
[    0.000000]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[    0.000000] CR0: 8005003b CR2: 0000003a CR3: 0195b000 CR4: 000006b0
[    0.000000] Stack:
[    0.000000]  00000100 000000d5 c195c800 c183ffd0 c18eff07 c1935100 00010800 c183ffd8
[    0.000000]  c18efca0 c183ffe8 c18ec92e c1935100 00020800 c183fff8 c18ec2b4 00020800
[    0.000000]  c195c800 025e5003 00000000
[    0.000000] Call Trace:
[    0.000000]  [<c18eff07>] native_init_IRQ+0x265/0x273
[    0.000000]  [<c18efca0>] init_IRQ+0x2c/0x2e
[    0.000000]  [<c18ec92e>] start_kernel+0x1e4/0x32a
[    0.000000]  [<c18ec2b4>] i386_start_kernel+0x82/0x86
[    0.000000] Code: eb 05 bf ea ff ff ff 8b 83 c4 00 00 00 e8 f6 a3 01 00 8d 65 f4 89 f8 5b 5e 5f 5d c3 55 89 e5 57 89 d7 56 53 89 c3 e8 4b e4 ff ff <f6> 40 3a 02 89 c6 74 16 b8 2b 3e 77 c1 ba 0a 05 00 00 e8 83 60
[    0.000000] EIP: [<c107079a>] setup_irq+0xf/0x4d SS:ESP 0068:c183ffb4
[    0.000000] CR2: 000000000000003a
[    0.000000] ---[ end trace cb88537fdc8fa200 ]---
[    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[    0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!

The culprit is an uncoditional setting of the IRQ2 which is used as cascade IRQ on legacy platforms. It seems we have to check if we have enough legacy IRQs reserved before we can call setup_irq().

The proposed patch adds such check.

---
 arch/x86/kernel/irqinit.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/irqinit.c +1 -1
index 1e6cff5..44f1ed4 100644
@@ -203,7 +203,7 @@ void __init native_init_IRQ(void)
 		set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]);
 	}
 
-	if (!acpi_ioapic && !of_ioapic)
+	if (!acpi_ioapic && !of_ioapic && nr_legacy_irqs())
 		setup_irq(2, &irq2);
 
 #ifdef CONFIG_X86_32
#4 lore raw
Quoted 3 lines · Jiang Liu

Hi Andy,
Have you encountered any issue with another call site of
setup_irq() in arch/x86/kernel/time.c?

No, since Intel MID uses its own .timer_init callback.

Quoted 6 lines
	void __init setup_default_timer_irq(void)
	{
	        setup_irq(0, &irq0);
	}
	Seems it may need the same protection for system without

legacy IRQ controller.

Agree.
I will add the same check there and resend v2.

Quoted 63 lines

Regards!
Gerry

Quoted 59 lines · Andy Shevchenko

The patch "x86, irq: Count legacy IRQs by legacy_pic->nr_legacy_irqs instead of NR_IRQS_LEGACY" (linux-next commit 95d76acc7518d566df18d67c1343bb375b78d1f3) removed reserved interrupts for the platforms that do not have a legacy IOAPIC. Meanwhile it breks a boot on Intel MID platforms such as Medfield.

[    0.000000] BUG: unable to handle kernel NULL pointer dereference at 0000003a
[    0.000000] IP: [<c107079a>] setup_irq+0xf/0x4d
[    0.000000] *pdpt = 0000000000000000 *pde = 9bbf32453167e510
[    0.000000] Oops: 0000 [#1] PREEMPT SMP
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.16.0-rc5-next-20140717-00043-g6ab7e8d-dirty #497
[    0.000000] task: c184bc80 ti: c183e000 task.ti: c183e000
[    0.000000] EIP: 0060:[<c107079a>] EFLAGS: 00210046 CPU: 0
[    0.000000] EIP is at setup_irq+0xf/0x4d
[    0.000000] EAX: 00000000 EBX: 00000002 ECX: 00000000 EDX: 00000002
[    0.000000] ESI: 000000d5 EDI: c184e280 EBP: c183ffc0 ESP: c183ffb4
[    0.000000]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[    0.000000] CR0: 8005003b CR2: 0000003a CR3: 0195b000 CR4: 000006b0
[    0.000000] Stack:
[    0.000000]  00000100 000000d5 c195c800 c183ffd0 c18eff07 c1935100 00010800 c183ffd8
[    0.000000]  c18efca0 c183ffe8 c18ec92e c1935100 00020800 c183fff8 c18ec2b4 00020800
[    0.000000]  c195c800 025e5003 00000000
[    0.000000] Call Trace:
[    0.000000]  [<c18eff07>] native_init_IRQ+0x265/0x273
[    0.000000]  [<c18efca0>] init_IRQ+0x2c/0x2e
[    0.000000]  [<c18ec92e>] start_kernel+0x1e4/0x32a
[    0.000000]  [<c18ec2b4>] i386_start_kernel+0x82/0x86
[    0.000000] Code: eb 05 bf ea ff ff ff 8b 83 c4 00 00 00 e8 f6 a3 01 00 8d 65 f4 89 f8 5b 5e 5f 5d c3 55 89 e5 57 89 d7 56 53 89 c3 e8 4b e4 ff ff <f6> 40 3a 02 89 c6 74 16 b8 2b 3e 77 c1 ba 0a 05 00 00 e8 83 60
[    0.000000] EIP: [<c107079a>] setup_irq+0xf/0x4d SS:ESP 0068:c183ffb4
[    0.000000] CR2: 000000000000003a
[    0.000000] ---[ end trace cb88537fdc8fa200 ]---
[    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[    0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!

The culprit is an uncoditional setting of the IRQ2 which is used as cascade IRQ on legacy platforms. It seems we have to check if we have enough legacy IRQs reserved before we can call setup_irq().

The proposed patch adds such check.

---
 arch/x86/kernel/irqinit.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/kernel/irqinit.c +1 -1
index 1e6cff5..44f1ed4 100644
@@ -203,7 +203,7 @@ void __init native_init_IRQ(void)
 		set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]);
 	}
 
-	if (!acpi_ioapic && !of_ioapic)
+	if (!acpi_ioapic && !of_ioapic && nr_legacy_irqs())
 		setup_irq(2, &irq2);
 
 #ifdef CONFIG_X86_32
Signature · 2 lines
Andy Shevchenko <[email protected]>
Intel Finland Oy