Skip to contentSkip to conversation

Adding a new board to U-Boot

U-Boot Robert Mortimer 2 participants 2 messages Dec 20, 2010 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): 1408012851.715.1292856000995.JavaMail.root@mailserver.xen.bluechiptechnology.co.uk

#1 lore raw

First off I aplogise for top posting. It is common on some of the groups I am in You will be glad to know I have registerd our board with the ARM registry I have updated my local git repo to reflect the number we were given. None of the porting guides I found round the internet seemed to include this step

Please could you confirm my understanding that the unique reference is passed to the loading Linux kernel to allow it to configure it's self for the target hardware.

Regards Rob

Blue Chip Technology Limited. Chowley Oak Lane, Tattenhall, Chester, Cheshire CH3 9EX Tel: 01829 772000 Registered in England 3110403 Vat No: GB 618 374134

#2 lore raw
Quoted 10 lines · Robert Mortimer

First off I aplogise for top posting. It is common on some of the groups I am in You will be glad to know I have registerd our board with the ARM registry I have updated my local git repo to reflect the number we were given. None of the porting guides I found round the internet seemed to include this step

Please could you confirm my understanding that the unique reference is passed to the loading Linux kernel to allow it to configure it's self for the target hardware.

The mach-type number has to be passed by the bootloader to the kernel via the register r1 in case of ARM based processors atleast.

You can refer to http://www.arm.linux.org.uk/developer/booting.php
and http://www.linux-arm.org/LinuxKernel/LinuxNewPlatformPort for more on this.

Regards,
Vaibhav