Skip to contentSkip to conversation

Warning Big Yield

DISCUSSION Joël Krähemann 3 participants 5 messages Aug 14, 2014 – Aug 18, 2014

lore
Share & tools
lore
#1 lore raw
Quoted 2 lines · Joël Krähemann

I'd really like to know if there's a common way to do syncing applications. What frequencies are required to run a GUI?

GUIs should be event based; the term "frequency" is not applicable.

Quoted 1 line

How does Xorg work

It's event based.

Quoted 1 line

how can I prevent interfering with ALSA output?

By doing sound stuff in a separate thread with higher priority.

Quoted 1 line

Warning you may experience big yield.

???

Regards,
Clemens

#2 lore raw
Quoted 7 lines · Clemens Ladisch
Quoted 2 lines · Joël Krähemann

I'd really like to know if there's a common way to do syncing applications. What frequencies are required to run a GUI?

GUIs should be event based; the term "frequency" is not applicable.

Quoted 1 line

How does Xorg work

It's event based.

Yes, event based.
For example, when using gtk ... if you want to update your GUI, you probably want to use the gtk timer to regularly update at a rate which suits your visual aesthetic.

You may already know this, but you can trigger a user function at regular intervals :
g_timeout_add
https://developer.gnome.org/glib/2.37/glib-The-Main-Event-Loop.html

Quoted 2 lines
Quoted 1 line

how can I prevent interfering with ALSA output?

By doing sound stuff in a separate thread with higher priority.

You can do something similar to what Jack does to ensure higher priority, check the file libjack/thread.c and look at the way they increment the priority.

You may already know this, however in case not, you can get low millisecond latency without dropping samples when using Linux ... i.e. no interferance. That was last time I checked ... it is possible that this has improved to a lower threshold since then !

Matt

Quoted 9 lines
Quoted 1 line

Warning you may experience big yield.

???

Regards,
Clemens
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

#3 lore raw
Quoted 43 lines · Matt Flax
Quoted 7 lines · Clemens Ladisch
Quoted 2 lines · Joël Krähemann

I'd really like to know if there's a common way to do syncing applications. What frequencies are required to run a GUI?

GUIs should be event based; the term "frequency" is not applicable.

Quoted 1 line

How does Xorg work

It's event based.

Yes, event based.
For example, when using gtk ... if you want to update your GUI, you probably want to use the gtk timer to regularly update at a rate which suits your visual aesthetic.

You may already know this, but you can trigger a user function at regular intervals :
g_timeout_add
https://developer.gnome.org/glib/2.37/glib-The-Main-Event-Loop.html

Quoted 2 lines
Quoted 1 line

how can I prevent interfering with ALSA output?

By doing sound stuff in a separate thread with higher priority.

You can do something similar to what Jack does to ensure higher priority, check the file libjack/thread.c and look at the way they increment the priority.

You may already know this, however in case not, you can get low millisecond latency without dropping samples when using Linux ... i.e. no interferance.
That was last time I checked ... it is possible that this has improved to a lower threshold since then !

Matt

Quoted 9 lines
Quoted 1 line

Warning you may experience big yield.

???

Regards,
Clemens
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Quoted 4 lines

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

I use 250 iterations of g_main_context_iteration() per second and application uses 1000 iterations per second.

And Herz is definitely a frequency.

regards
Joël

#4 lore raw
In reply to Matt Flax

Am Freitag, den 15.08.2014, 08:58 +1000 schrieb Matt Flax:

Quoted 43 lines · Clemens Ladisch
Quoted 7 lines
Quoted 2 lines · Joël Krähemann

I'd really like to know if there's a common way to do syncing applications. What frequencies are required to run a GUI?

GUIs should be event based; the term "frequency" is not applicable.

Quoted 1 line

How does Xorg work

It's event based.

Yes, event based.
For example, when using gtk ... if you want to update your GUI, you probably want to use the gtk timer to regularly update at a rate which suits your visual aesthetic.

You may already know this, but you can trigger a user function at regular intervals :
g_timeout_add
https://developer.gnome.org/glib/2.37/glib-The-Main-Event-Loop.html

Quoted 2 lines
Quoted 1 line

how can I prevent interfering with ALSA output?

By doing sound stuff in a separate thread with higher priority.

You can do something similar to what Jack does to ensure higher priority, check the file libjack/thread.c and look at the way they increment the priority.

You may already know this, however in case not, you can get low millisecond latency without dropping samples when using Linux ... i.e. no interferance.
That was last time I checked ... it is possible that this has improved to a lower threshold since then !

Matt

Quoted 9 lines
Quoted 1 line

Warning you may experience big yield.

???

Regards,
Clemens
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Quoted 4 lines

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

With big yield I mean you hear a noise assumed you would call pthread_yield to often.

It is strange how can I recognize more than 8 beats per second or even more ...

I have modified my application not to do so, anymore.

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel