treewide: Fix typo in printk
Subsystems (18)
PATCH 1/1 treewide: Fix typo in printk
This patch fix spelling typo in printk.
--- arch/m68k/Kconfig.devices | 2 +- arch/mips/lantiq/falcon/sysctrl.c | 2 +- arch/mips/lantiq/xway/sysctrl.c | 2 +- arch/mips/pci/pci-lantiq.c | 2 +- arch/powerpc/kvm/e500_mmu_host.c | 2 +- arch/powerpc/platforms/powernv/opal.c | 2 +- drivers/crypto/qat/qat_common/adf_ctl_drv.c | 2 +- drivers/infiniband/hw/ocrdma/ocrdma_verbs.c | 2 +- drivers/net/ethernet/mellanox/mlx4/cmd.c | 4 ++-- drivers/net/ethernet/via/via-velocity.c | 2 +- drivers/net/wireless/libertas/cfg.c | 2 +- drivers/scsi/fnic/fnic_debugfs.c | 2 +- drivers/scsi/fnic/fnic_trace.c | 2 +- drivers/video/backlight/88pm860x_bl.c | 2 +- net/netfilter/ipset/ip_set_core.c | 2 +- scripts/sign-file | 2 +- 16 files changed, 17 insertions(+), 17 deletions(-)
arch/m68k/Kconfig.devices +1 -1
@@ -73,7 +73,7 @@ config ATARI_ETHERNEC ROM port. The driver works by polling instead of interrupts, so it is quite slow. - This driver also suppports the ethernet part of the NetUSBee ROM + This driver also supports the ethernet part of the NetUSBee ROM port combined Ethernet/USB adapter. To compile the actual ethernet driver, choose Y or M in for the NE2000
arch/mips/lantiq/falcon/sysctrl.c +1 -1
@@ -221,7 +221,7 @@ void __init ltq_soc_init(void) (request_mem_region(res_sys[2].start, resource_size(&res_sys[2]), res_sys[2].name) < 0)) -pr_err ("Failed to request core reources" ); +pr_err ("Failed to request core resources" ); status_membase =ioremap_nocache (res_status.start,resource_size (&res_status));
arch/mips/lantiq/xway/sysctrl.c +1 -1
@@ -318,7 +318,7 @@ void __init ltq_soc_init(void) res_cgu.name) < 0) || (request_mem_region(res_ebu.start, resource_size(&res_ebu), res_ebu.name) < 0)) -pr_err ("Failed to request core reources" ); +pr_err ("Failed to request core resources" ); pmu_membase =ioremap_nocache (res_pmu.start,resource_size (&res_pmu)); ltq_cgu_membase = ioremap_nocache(res_cgu.start,
arch/mips/pci/pci-lantiq.c +1 -1
@@ -218,7 +218,7 @@ static int ltq_pci_probe(struct platform_device *pdev) res_cfg =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); res_bridge =platform_get_resource (pdev,IORESOURCE_MEM ,1 );if (!res_cfg || !res_bridge) { -dev_err (&pdev->dev,"missing memory reources\n" ); +dev_err (&pdev->dev,"missing memory resources\n" );return -EINVAL ; }
arch/powerpc/kvm/e500_mmu_host.c +1 -1
@@ -663,7 +663,7 @@ int kvmppc_load_last_inst(struct kvm_vcpu *vcpu, enum instruction_type type,if (unlikely ((pr && !(mas3 &MAS3_UX )) || (!pr && !(mas3 &MAS3_SX )))) {pr_err_ratelimited ( -"%s: Instuction emulation from guest addres %08lx without execute permission\n" , +"%s: Instuction emulation from guest address %08lx without execute permission\n" , __func__, geaddr);return EMULATE_AGAIN ; }
arch/powerpc/platforms/powernv/opal.c +1 -1
@@ -322,7 +322,7 @@ static void opal_handle_message(void)/* check for errors. */ if (ret) { -pr_warning ("%s: Failed to retrive opal message, err=%lld\n" , +pr_warning ("%s: Failed to retrieve opal message, err=%lld\n" , __func__, ret);return ; }
drivers/crypto/qat/qat_common/adf_ctl_drv.c +1 -1
@@ -436,7 +436,7 @@ static long adf_ctl_ioctl(struct file *fp, unsigned int cmd, unsigned long arg) ret =adf_ctl_ioctl_get_status (fp, cmd, arg);break ;default : -pr_err ("QAT: Invalid ioclt\n" ); +pr_err ("QAT: Invalid ioctl\n" ); ret = -EFAULT ;break ; }
drivers/infiniband/hw/ocrdma/ocrdma_verbs.c +1 -1
@@ -1870,7 +1870,7 @@ static int ocrdma_build_inline_sges(struct ocrdma_qp *qp, hdr->total_len =ocrdma_sglist_len (wr->sg_list, wr->num_sge);if (unlikely (hdr->total_len > qp->max_inline_data)) {pr_err ("%s() supported_len=0x%x,\n" -" unspported len req=0x%x\n" , __func__, +" unsupported len req=0x%x\n" , __func__, qp->max_inline_data, hdr->total_len);return -EINVAL ; }
drivers/net/ethernet/mellanox/mlx4/cmd.c +2 -2
@@ -1695,7 +1695,7 @@ static int mlx4_master_activate_admin_state(struct mlx4_priv *priv, int slave)if (err) { vp_oper->vlan_idx =NO_INDX ;mlx4_warn (&priv->dev, -"No vlan resorces slave %d, port %d\n" , +"No vlan resources slave %d, port %d\n" , slave, port);return err; }
@@ -1711,7 +1711,7 @@ static int mlx4_master_activate_admin_state(struct mlx4_priv *priv, int slave) err = vp_oper->mac_idx; vp_oper->mac_idx =NO_INDX ;mlx4_warn (&priv->dev, -"No mac resorces slave %d, port %d\n" , +"No mac resources slave %d, port %d\n" , slave, port);return err; }
drivers/net/ethernet/via/via-velocity.c +1 -1
@@ -2056,7 +2056,7 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx)struct sk_buff *skb;if (rd->rdesc0.RSR & (RSR_STP |RSR_EDP )) { -VELOCITY_PRT (MSG_LEVEL_VERBOSE ,KERN_ERR " %s : the received frame span multple RDs.\n" , vptr->netdev->name); +VELOCITY_PRT (MSG_LEVEL_VERBOSE ,KERN_ERR " %s : the received frame span multiple RDs.\n" , vptr->netdev->name); stats->rx_length_errors++;return -EINVAL ; }
drivers/net/wireless/libertas/cfg.c +1 -1
@@ -1353,7 +1353,7 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev,wait_event_interruptible_timeout (priv->scan_q, (priv->scan_req ==NULL ), (15 *HZ )); -lbs_deb_assoc ("assoc: scanning competed\n" ); +lbs_deb_assoc ("assoc: scanning completed\n" ); }/* Find the BSS we want using available scan results */
drivers/scsi/fnic/fnic_debugfs.c +1 -1
@@ -210,7 +210,7 @@ static ssize_t fnic_trace_ctrl_write(struct file *filp,else if (*trace_type == fc_trc_flag->fc_clear) fnic_fc_trace_cleared = val;else -pr_err ("fnic: cannot write to any debufs file\n" ); +pr_err ("fnic: cannot write to any debugfs file\n" ); (*ppos)++;
drivers/scsi/fnic/fnic_trace.c +1 -1
@@ -592,7 +592,7 @@ int fnic_fc_trace_set_data(u32 host_no, u8 frame_type,if (fnic_fc_trace_cleared ==1 ) { fc_trace_entries.rd_idx = fc_trace_entries.wr_idx =0 ; -pr_info ("fnic: Reseting the read idx\n" ); +pr_info ("fnic: Resetting the read idx\n" );memset ((void *)fnic_fc_ctlr_trace_buf_p,0 , fnic_fc_trace_max_pages *PAGE_SIZE ); fnic_fc_trace_cleared =0 ;
drivers/video/backlight/88pm860x_bl.c +1 -1
@@ -216,7 +216,7 @@ static int pm860x_backlight_probe(struct platform_device *pdev) data->reg_duty_cycle = res->start; res =platform_get_resource_byname (pdev,IORESOURCE_REG ,"always on" );if (!res) { -dev_err (&pdev->dev,"No REG resorce for always on\n" ); +dev_err (&pdev->dev,"No REG resource for always on\n" );return -ENXIO ; } data->reg_always_on = res->start;
net/netfilter/ipset/ip_set_core.c +1 -1
@@ -478,7 +478,7 @@ ip_set_test(ip_set_id_t index, const struct sk_buff *skb,if (ret == -EAGAIN ) {/* Type requests element to be completed */ -pr_debug ("element must be competed, ADD is triggered\n" ); +pr_debug ("element must be completed, ADD is triggered\n" );write_lock_bh (&set->lock); set->variant->kadt (set, skb, par,IPSET_ADD , opt);write_unlock_bh (&set->lock);
scripts/sign-file +1 -1
@@ -398,7 +398,7 @@ if ($verbose) { print "Size of signer's name : ", length($signers_name), "\n"; print "Size of key identifier : ", length($key_identifier), "\n"; print "Size of signature : ", length($signature), "\n"; - print "Size of informaton : ", length($info), "\n"; + print "Size of information : ", length($info), "\n"; print "Size of magic number : ", length($magic_number), "\n"; print "Signer's name : '", $signers_name, "'\n"; print "Digest : $dgst\n";
Signature · 1 line
1.9.3
arch/m68k/Kconfig.devices config ATARI_ETHERNEC · line 77
Quoted 11 lines · Masanari Iida
arch/m68k/Kconfig.devices +1
-1@@ -73,7 +73,7 @@ config ATARI_ETHERNEC ROM port. The driver works by polling instead of interrupts, so it is quite slow. - This driver also suppports the ethernet part of the NetUSBee ROM + This driver also supports the ethernet part of the NetUSBee ROM port combined Ethernet/USB adapter.
BTW, there are a few more you may want to fix:
$ git grep supppor arch/m68k/Kconfig.devices: This driver also suppports the ethernet part of the NetUSBee ROM drivers/scsi/esas2r/esas2r_flash.c: /* not suppported for now */; drivers/scsi/mpt3sas/mpt3sas_ctl.c:/*********** diagnostic trigger suppport *********************************/ drivers/scsi/mpt3sas/mpt3sas_ctl.c:/*********** diagnostic trigger suppport *** END ****************************/ drivers/staging/comedi/drivers/pcmuio.c: /* subdevices 0 and 2 can suppport interrupts */ drivers/usb/gadget/udc/Kconfig: high speed or full speed USB device. This driver supppors fs/f2fs/f2fs.h: /* For sysfs suppport */ include/uapi/linux/nl80211.h: * to work properly to suppport receiving regulatory hints from kernel/trace/trace.h: * Now if the arch does not suppport a feature, and it calls
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Quoted 12 lines · Geert Uytterhoeven
BTW, there are a few more you may want to fix:
$ git grep supppor arch/m68k/Kconfig.devices: This driver also suppports the ethernet part of the NetUSBee ROM drivers/scsi/esas2r/esas2r_flash.c: /* not suppported for now */; drivers/scsi/mpt3sas/mpt3sas_ctl.c:/*********** diagnostic trigger suppport *********************************/ drivers/scsi/mpt3sas/mpt3sas_ctl.c:/*********** diagnostic trigger suppport *** END ****************************/ drivers/staging/comedi/drivers/pcmuio.c: /* subdevices 0 and 2 can
Quoted 9 lines
suppport interrupts */ drivers/usb/gadget/udc/Kconfig: high speed or full speed USB device. This driver supppors fs/f2fs/f2fs.h: /* For sysfs suppport */ include/uapi/linux/nl80211.h: * to work properly to suppport receiving regulatory hints from kernel/trace/trace.h: * Now if the arch does not suppport a feature, and it calls
Thanks for suggestion.
I am working on fixing typos in printk messages and Documentations. Because these typos can be found by end users, while using Linux.
Masanari
Quoted 27 lines · Masanari Iida
This patch fix spelling typo in printk.
Signed-off-by Masanari Iida <[email protected]>--- arch/m68k/Kconfig.devices | 2 +- arch/mips/lantiq/falcon/sysctrl.c | 2 +- arch/mips/lantiq/xway/sysctrl.c | 2 +- arch/mips/pci/pci-lantiq.c | 2 +- arch/powerpc/kvm/e500_mmu_host.c | 2 +- arch/powerpc/platforms/powernv/opal.c | 2 +- drivers/crypto/qat/qat_common/adf_ctl_drv.c | 2 +- drivers/infiniband/hw/ocrdma/ocrdma_verbs.c | 2 +- drivers/net/ethernet/mellanox/mlx4/cmd.c | 4 ++-- drivers/net/ethernet/via/via-velocity.c | 2 +- drivers/net/wireless/libertas/cfg.c | 2 +- drivers/scsi/fnic/fnic_debugfs.c | 2 +- drivers/scsi/fnic/fnic_trace.c | 2 +- drivers/video/backlight/88pm860x_bl.c | 2 +- net/netfilter/ipset/ip_set_core.c | 2 +- scripts/sign-file | 2 +- 16 files changed, 17 insertions(+), 17 deletions(-)arch/powerpc/kvm/e500_mmu_host.c +0
-0
arch/powerpc/kvm/e500_mmu_host.c int kvmppc_load_last_inst(struct kvm_vcpu *vcpu, enum instruction_type type, · line 666
Quoted 5 lines
arch/powerpc/kvm/e500_mmu_host.c +1
-1@@ -663,7 +663,7 @@ int kvmppc_load_last_inst(struct kvm_vcpu *vcpu, enum instruction_type type,if (unlikely ((pr && !(mas3 &MAS3_UX )) || (!pr && !(mas3 &MAS3_SX )))) { pr_err_ratelimited( - "%s: Instuction emulation from guest addres %08lx without execute permission\n", + "%s: Instuction emulation from guest address %08lx without execute permission\n",
Instruction
drivers/net/ethernet/via/via-velocity.c static int velocity_receive_frame(struct velocity_info *vptr, int idx) · line 2059
Quoted 13 lines
arch/powerpc/kvm/e500_mmu_host.c +0
-0__func__, geaddr);return EMULATE_AGAIN ; }drivers/net/ethernet/via/via-velocity.c +1
-1@@ -2056,7 +2056,7 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx)struct sk_buff *skb;if (rd->rdesc0.RSR & (RSR_STP |RSR_EDP )) { -VELOCITY_PRT (MSG_LEVEL_VERBOSE ,KERN_ERR " %s : the received frame span multple RDs.\n" , vptr->netdev->name); +VELOCITY_PRT (MSG_LEVEL_VERBOSE ,KERN_ERR " %s : the received frame span multiple RDs.\n" , vptr->netdev->name);
spans
drivers/net/ethernet/via/via-velocity.c static int velocity_receive_frame(struct velocity_info *vptr, int idx) · line 2062
Quoted 3 lines
drivers/net/ethernet/via/via-velocity.c +0
-0stats->rx_length_errors++;return -EINVAL ; }
Thanks,
Signature · 1 line
~Randy
This patch fix spelling typo in printk.
--- arch/m68k/Kconfig.devices | 2 +- arch/mips/lantiq/falcon/sysctrl.c | 2 +- arch/mips/lantiq/xway/sysctrl.c | 2 +- arch/mips/pci/pci-lantiq.c | 2 +- arch/powerpc/kvm/e500_mmu_host.c | 2 +- arch/powerpc/platforms/powernv/opal.c | 2 +- drivers/crypto/qat/qat_common/adf_ctl_drv.c | 2 +- drivers/infiniband/hw/ocrdma/ocrdma_verbs.c | 2 +- drivers/net/ethernet/mellanox/mlx4/cmd.c | 4 ++-- drivers/net/ethernet/via/via-velocity.c | 2 +- drivers/net/wireless/libertas/cfg.c | 2 +- drivers/scsi/fnic/fnic_debugfs.c | 2 +- drivers/scsi/fnic/fnic_trace.c | 2 +- drivers/video/backlight/88pm860x_bl.c | 2 +- net/netfilter/ipset/ip_set_core.c | 2 +- scripts/sign-file | 2 +- 16 files changed, 17 insertions(+), 17 deletions(-)
arch/m68k/Kconfig.devices +1 -1
@@ -73,7 +73,7 @@ config ATARI_ETHERNEC ROM port. The driver works by polling instead of interrupts, so it is quite slow. - This driver also suppports the ethernet part of the NetUSBee ROM + This driver also supports the ethernet part of the NetUSBee ROM port combined Ethernet/USB adapter. To compile the actual ethernet driver, choose Y or M in for the NE2000
arch/mips/lantiq/falcon/sysctrl.c +1 -1
@@ -221,7 +221,7 @@ void __init ltq_soc_init(void) (request_mem_region(res_sys[2].start, resource_size(&res_sys[2]), res_sys[2].name) < 0)) -pr_err ("Failed to request core reources" ); +pr_err ("Failed to request core resources" ); status_membase =ioremap_nocache (res_status.start,resource_size (&res_status));
arch/mips/lantiq/xway/sysctrl.c +1 -1
@@ -318,7 +318,7 @@ void __init ltq_soc_init(void) res_cgu.name) < 0) || (request_mem_region(res_ebu.start, resource_size(&res_ebu), res_ebu.name) < 0)) -pr_err ("Failed to request core reources" ); +pr_err ("Failed to request core resources" ); pmu_membase =ioremap_nocache (res_pmu.start,resource_size (&res_pmu)); ltq_cgu_membase = ioremap_nocache(res_cgu.start,
arch/mips/pci/pci-lantiq.c +1 -1
@@ -218,7 +218,7 @@ static int ltq_pci_probe(struct platform_device *pdev) res_cfg =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); res_bridge =platform_get_resource (pdev,IORESOURCE_MEM ,1 );if (!res_cfg || !res_bridge) { -dev_err (&pdev->dev,"missing memory reources\n" ); +dev_err (&pdev->dev,"missing memory resources\n" );return -EINVAL ; }
arch/powerpc/kvm/e500_mmu_host.c +1 -1
@@ -663,7 +663,7 @@ int kvmppc_load_last_inst(struct kvm_vcpu *vcpu, enum instruction_type type,if (unlikely ((pr && !(mas3 &MAS3_UX )) || (!pr && !(mas3 &MAS3_SX )))) {pr_err_ratelimited ( -"%s: Instuction emulation from guest addres %08lx without execute permission\n" , +"%s: Instruction emulation from guest address %08lx without execute permission\n" , __func__, geaddr);return EMULATE_AGAIN ; }
arch/powerpc/platforms/powernv/opal.c +1 -1
@@ -322,7 +322,7 @@ static void opal_handle_message(void)/* check for errors. */ if (ret) { -pr_warning ("%s: Failed to retrive opal message, err=%lld\n" , +pr_warning ("%s: Failed to retrieve opal message, err=%lld\n" , __func__, ret);return ; }
drivers/crypto/qat/qat_common/adf_ctl_drv.c +1 -1
@@ -436,7 +436,7 @@ static long adf_ctl_ioctl(struct file *fp, unsigned int cmd, unsigned long arg) ret =adf_ctl_ioctl_get_status (fp, cmd, arg);break ;default : -pr_err ("QAT: Invalid ioclt\n" ); +pr_err ("QAT: Invalid ioctl\n" ); ret = -EFAULT ;break ; }
drivers/infiniband/hw/ocrdma/ocrdma_verbs.c +1 -1
@@ -1870,7 +1870,7 @@ static int ocrdma_build_inline_sges(struct ocrdma_qp *qp, hdr->total_len =ocrdma_sglist_len (wr->sg_list, wr->num_sge);if (unlikely (hdr->total_len > qp->max_inline_data)) {pr_err ("%s() supported_len=0x%x,\n" -" unspported len req=0x%x\n" , __func__, +" unsupported len req=0x%x\n" , __func__, qp->max_inline_data, hdr->total_len);return -EINVAL ; }
drivers/net/ethernet/mellanox/mlx4/cmd.c +2 -2
@@ -1695,7 +1695,7 @@ static int mlx4_master_activate_admin_state(struct mlx4_priv *priv, int slave)if (err) { vp_oper->vlan_idx =NO_INDX ;mlx4_warn (&priv->dev, -"No vlan resorces slave %d, port %d\n" , +"No vlan resources slave %d, port %d\n" , slave, port);return err; }
@@ -1711,7 +1711,7 @@ static int mlx4_master_activate_admin_state(struct mlx4_priv *priv, int slave) err = vp_oper->mac_idx; vp_oper->mac_idx =NO_INDX ;mlx4_warn (&priv->dev, -"No mac resorces slave %d, port %d\n" , +"No mac resources slave %d, port %d\n" , slave, port);return err; }
drivers/net/ethernet/via/via-velocity.c +1 -1
@@ -2056,7 +2056,7 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx)struct sk_buff *skb;if (rd->rdesc0.RSR & (RSR_STP |RSR_EDP )) { -VELOCITY_PRT (MSG_LEVEL_VERBOSE ,KERN_ERR " %s : the received frame span multple RDs.\n" , vptr->netdev->name); +VELOCITY_PRT (MSG_LEVEL_VERBOSE ,KERN_ERR " %s : the received frame spans multiple RDs.\n" , vptr->netdev->name); stats->rx_length_errors++;return -EINVAL ; }
drivers/net/wireless/libertas/cfg.c +1 -1
@@ -1353,7 +1353,7 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev,wait_event_interruptible_timeout (priv->scan_q, (priv->scan_req ==NULL ), (15 *HZ )); -lbs_deb_assoc ("assoc: scanning competed\n" ); +lbs_deb_assoc ("assoc: scanning completed\n" ); }/* Find the BSS we want using available scan results */
drivers/scsi/fnic/fnic_debugfs.c +1 -1
@@ -210,7 +210,7 @@ static ssize_t fnic_trace_ctrl_write(struct file *filp,else if (*trace_type == fc_trc_flag->fc_clear) fnic_fc_trace_cleared = val;else -pr_err ("fnic: cannot write to any debufs file\n" ); +pr_err ("fnic: cannot write to any debugfs file\n" ); (*ppos)++;
drivers/scsi/fnic/fnic_trace.c +1 -1
@@ -592,7 +592,7 @@ int fnic_fc_trace_set_data(u32 host_no, u8 frame_type,if (fnic_fc_trace_cleared ==1 ) { fc_trace_entries.rd_idx = fc_trace_entries.wr_idx =0 ; -pr_info ("fnic: Reseting the read idx\n" ); +pr_info ("fnic: Resetting the read idx\n" );memset ((void *)fnic_fc_ctlr_trace_buf_p,0 , fnic_fc_trace_max_pages *PAGE_SIZE ); fnic_fc_trace_cleared =0 ;
drivers/video/backlight/88pm860x_bl.c +1 -1
@@ -216,7 +216,7 @@ static int pm860x_backlight_probe(struct platform_device *pdev) data->reg_duty_cycle = res->start; res =platform_get_resource_byname (pdev,IORESOURCE_REG ,"always on" );if (!res) { -dev_err (&pdev->dev,"No REG resorce for always on\n" ); +dev_err (&pdev->dev,"No REG resource for always on\n" );return -ENXIO ; } data->reg_always_on = res->start;
net/netfilter/ipset/ip_set_core.c +1 -1
@@ -478,7 +478,7 @@ ip_set_test(ip_set_id_t index, const struct sk_buff *skb,if (ret == -EAGAIN ) {/* Type requests element to be completed */ -pr_debug ("element must be competed, ADD is triggered\n" ); +pr_debug ("element must be completed, ADD is triggered\n" );write_lock_bh (&set->lock); set->variant->kadt (set, skb, par,IPSET_ADD , opt);write_unlock_bh (&set->lock);
scripts/sign-file +1 -1
@@ -398,7 +398,7 @@ if ($verbose) { print "Size of signer's name : ", length($signers_name), "\n"; print "Size of key identifier : ", length($key_identifier), "\n"; print "Size of signature : ", length($signature), "\n"; - print "Size of informaton : ", length($info), "\n"; + print "Size of information : ", length($info), "\n"; print "Size of magic number : ", length($magic_number), "\n"; print "Signer's name : '", $signers_name, "'\n"; print "Digest : $dgst\n";
Signature · 1 line
2.1.0.24.g4109c28
Randy Dunlap
Acked-byQuoted 4 lines · Masanari Iida
This patch fix spelling typo in printk.
Signed-off-by Masanari Iida <[email protected]>
Thanks.
Quoted 18 lines
--- arch/m68k/Kconfig.devices | 2 +- arch/mips/lantiq/falcon/sysctrl.c | 2 +- arch/mips/lantiq/xway/sysctrl.c | 2 +- arch/mips/pci/pci-lantiq.c | 2 +- arch/powerpc/kvm/e500_mmu_host.c | 2 +- arch/powerpc/platforms/powernv/opal.c | 2 +- drivers/crypto/qat/qat_common/adf_ctl_drv.c | 2 +- drivers/infiniband/hw/ocrdma/ocrdma_verbs.c | 2 +- drivers/net/ethernet/mellanox/mlx4/cmd.c | 4 ++-- drivers/net/ethernet/via/via-velocity.c | 2 +- drivers/net/wireless/libertas/cfg.c | 2 +- drivers/scsi/fnic/fnic_debugfs.c | 2 +- drivers/scsi/fnic/fnic_trace.c | 2 +- drivers/video/backlight/88pm860x_bl.c | 2 +- net/netfilter/ipset/ip_set_core.c | 2 +- scripts/sign-file | 2 +- 16 files changed, 17 insertions(+), 17 deletions(-)
Signature · 1 line
~Randy