pull: third time lucky
Sami Kerola
v3 cover pull: third time lucky
Hello,
The following 15 patches are re-submission. Reply indicators are related to feedback from:
https://lists.01.org/pipermail/powertop/2014-August/001495.html
Quoted 4 lines
0- When creating your patches modify the patch set subject using: git
format-patch --cover-letter --subject-prefix="PATCH Vx"... Where x is the next version for your patches. For your next version use v3. This very useful for sorting purposes on my inbox.
That makes sense. Done.
Quoted 5 lines
1- Every time you make changes to your patches you would need to send
the entire set of patches with an updated version. This link explains patch best practices that we follow on PowerTOP and across the Linux kernel community:
http://kernelnewbies.org/OPWfirstpatch#head-067c0e555973ae364180b2e3fbe90544e6aa378e
Are you sure kernel newbies page is telling to resubmit long patch sets when there is only modest change is some in middle? IMHO resubmitting individual patches that has changed when combined with a git remote repository containing the full patch set is good way to do keep noise level low.
But then again all projects has some habits that I don't understand/agree with which shouldn't really be a problem. I will keep on resubmitting patch sets when requested to do so (and protest a bit by having the git remote available ;-)
Quoted 3 lines
3- It is a good practice to add the names of the people who reviewed
your patches, at the commit paragraph Reviewed_by:[the name of the person].
Done.
Quoted 4 lines
Here is my review to the 14 patches you sent on v2 of your code:
P1, P2, P4, P5, P6, P10, P11, P12, P13, and P14:
-Look good.
Great.
Quoted 5 lines
P3:
- Change the subject line to something more descriptive. Add a description of why are you making this change, and how it benefits PowerTOP. The subject lines and descriptions are very useful when bisecting the tree for debugging purposes.
Done: add src/cpu/rapl/.deps to .gitignore
Quoted 2 lines
P7:
- Please add a description to this patch. (Same reasoning as on P3)
See the patch 0007.
Quoted 7 lines
P8:
- I have a problem naming -h --html and -u --help. Please change -h to --help, and use another letter for --html for instance: r as of report would be more fitting. New users will want to do powertop -h and see the help not the html report and get totally lost. It is just matter of reusing the already established usability metaphors.
I did change -h to --help, which is ABI change to undocumented interface, which may or may not better than having unconventional short option assignment. BTW I think it would be good to add this change to release notes, just that no-one can later tell breaking changes happen without noise.
Quoted 2 lines
P9:
- Please abbreviate the subject and add a description to this patch.
Done.
Quoted 7 lines
- To make this a feature-complete Sergey's feedback should be
implemented: "...to extendui_notify_user()so it can cover both
cases: initialised ncurses -- callingmvprintw(), and uninitialised ncurses -- printf (to stdout). this will change a bit 'powertop --auto-tune' behaviour, since by default user will now see a 'list' of commands executed by powertop, but it's really easy to silent powertop via stdout redirection".
As Sergey mentioned the mvprintw() avoidance is not needed. But since I figured out how to make both cases, ncurses and console, work without pain a patch 0014 was added to the change set. At the moment one can say usefulness of the change is close to zero, as the ui_notify_user() is not reached in case of --auto-tune, but perhaps that changes in future. And then it's nice to have a facility in place that just works.
The following changes since commit cdff23d6e40e31a68286a51e3c94c8a901a74091:
powertop: remove temporary file (2014-08-22 09:18:34 -0700)
are available in the git repository at:
git://github.com/kerolasa/powertop.git sami
for you to fetch changes up to 295c86c4f5fa22024792e8e850f303eec7f4b6a3:
allow none-ncurses messaging with ui_notify_user() (2014-09-07 21:52:48 +0100)
----------------------------------------------------------------
Sami Kerola (15):
configure: use vertical lists
configure: prefer AS_IF macro rather than shell if statement add src/cpu/rapl/.deps to .gitignore
clean up Makefile.am files
fix clang++ compilation errors
remove unnecessary assignments
remove unnecessary code reported by cppcheck
add short options to usage, and reorder options in code do not use ncurses with --auto-tune
improve manual groff syntax
fix couple typos
wrap lines in README.traceevent
clean up .gitignore file
add --auto-tune and --workload to manual page allow none-ncurses messaging with ui_notify_user()
.gitignore | 110 ++++++++++------------- Makefile.am | 14 ++- README.traceevent | 21 +++-- configure.ac | 102 ++++++++++++++++----- doc/powertop.8 | 149 ++++++++++++++++--------------- src/Makefile.am | 193 +++++++++++++++++++++++++++++++--------- src/cpu/cpu.cpp | 18 ++-- src/cpu/rapl/rapl_interface.cpp | 4 +- src/devices/ahci.cpp | 3 +- src/devices/alsa.cpp | 1 - src/devices/device.cpp | 6 +- src/devlist.cpp | 3 +- src/display.cpp | 9 +- src/lib.cpp | 19 ++-- src/lib.h | 4 +- src/main.cpp | 181 +++++++++++++++++++------------------ src/process/do_process.cpp | 11 ++- src/report/report.cpp | 3 +- src/tuning/nl80211.h | 4 +- src/tuning/runtime.cpp | 4 - src/tuning/tuning.cpp | 11 +-- 21 files changed, 533 insertions(+), 337 deletions(-)
Signature · 1 line
2.1.0
Sami Kerola
PATCH v3 1/15 configure: use vertical lists
Horizontal lists has downside of being managed as a single entry in version control, which makes commits that add and remove items difficult to follow. With vertical lists each entry is managed separately, which is much nicer.
Additionally add project URL to autoconfig init, and pretty print macro expressions to have indentation, and bracing that follows more or less in K&R style.
--- configure.ac | 82 +++++++++++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 67 insertions(+), 15 deletions(-)
configure.ac +67 -15
@@ -2,15 +2,21 @@ # Process this file with autoconf to produce a configure script. AC_PREREQ([2.68]) -AC_INIT([powertop], [2.6.1], [powertop(a)lists.01.org]) -AM_INIT_AUTOMAKE([-Wall foreign ]) +AC_INIT([powertop], [2.6.1], [powertop(a)lists.01.org], [], [https://01.org/powertop]) +AM_INIT_AUTOMAKE([-Wall foreign]) AC_LANG([C++]) -AC_CONFIG_FILES([Makefile src/Makefile traceevent/Makefile po/Makefile.in doc/Makefile]) +AC_CONFIG_FILES([ + Makefile + src/Makefile + traceevent/Makefile + po/Makefile.in + doc/Makefile +]) AC_CONFIG_SRCDIR([src/main.cpp]) AC_CONFIG_MACRO_DIR([m4]) AC_CONFIG_HEADERS([config.h]) GETTEXT_PACKAGE=powertop -AC_SUBST(GETTEXT_PACKAGE) +AC_SUBST([GETTEXT_PACKAGE]) AM_SILENT_RULES([yes]) AM_GNU_GETTEXT([external]) AM_GNU_GETTEXT_VERSION([0.18])
@@ -26,7 +32,23 @@ AM_PROG_CC_C_O # Checks for libraries. # Checks for header files. -AC_CHECK_HEADERS([fcntl.h libintl.h limits.h locale.h malloc.h stdint.h stdlib.h string.h sys/ioctl.h sys/socket.h sys/statfs.h sys/time.h termios.h unistd.h ncurses.h]) +AC_CHECK_HEADERS([ \ + fcntl.h \ + libintl.h \ + limits.h \ + locale.h \ + malloc.h \ + ncurses.h \ + stdint.h \ + stdlib.h \ + string.h \ + sys/ioctl.h \ + sys/socket.h \ + sys/statfs.h \ + sys/time.h \ + termios.h \ + unistd.h \ +]) # Checks for typedefs, structures, and compiler characteristics. AC_HEADER_STDBOOL
@@ -44,20 +66,46 @@ AC_FUNC_MALLOC AC_FUNC_MMAP AC_FUNC_REALLOC AC_FUNC_STRTOD -AC_CHECK_FUNCS([fdatasync getpagesize gettimeofday memmove memset mkdir munmap pow realpath regcomp select setlocale socket sqrt strcasecmp strchr strdup strerror strncasecmp strstr strtoul strtoull]) +AC_CHECK_FUNCS([ \ + fdatasync \ + getpagesize \ + gettimeofday \ + memmove \ + memset \ + mkdir \ + munmap \ + pow \ + realpath \ + regcomp \ + select \ + setlocale \ + socket \ + sqrt \ + strcasecmp \ + strchr \ + strdup \ + strerror \ + strncasecmp \ + strstr \ + strtoul \ + strtoull \ +]) -PKG_CHECK_MODULES([NCURSES], [ncursesw ncurses], [LIBS="$LIBS $ncurses_LIBS"], - AC_SEARCH_LIBS([delwin], [ncursesw ncurses], [], AC_MSG_ERROR([ncurses is required but was not found]), [])) +PKG_CHECK_MODULES([NCURSES], [ncursesw ncurses], [LIBS="$LIBS $ncurses_LIBS"], [ + AC_SEARCH_LIBS([delwin], [ncursesw ncurses], [], [ + AC_MSG_ERROR([ncurses is required but was not found]) + ], []) +]) has_libpci=0 -PKG_CHECK_MODULES([PCIUTILS], [libpci],[has_libpci=1],[ - AC_SEARCH_LIBS([pci_get_dev], [pci],[has_libpci=1], [has_libpci=0] )]) +PKG_CHECK_MODULES([PCIUTILS], [libpci],[has_libpci=1], [ + AC_SEARCH_LIBS([pci_get_dev], [pci],[has_libpci=1], [has_libpci=0]) +]) has_libnl_ver=0 -# libnl-2 provides only libnl-2.0.pc file, so we check for separate libnl-genl-3.0.pc -# pkg-config file just for libnl-3.0 case. -# +dnl libnl-2 provides only libnl-2.0.pc file, so we check for separate +dnl libnl-genl-3.0.pc pkg-config file just for libnl-3.0 case. PKG_CHECK_MODULES([LIBNL], [libnl-3.0 >= 3.0 libnl-genl-3.0 >= 3.0], [has_libnl_ver=3], [ PKG_CHECK_MODULES([LIBNL], [libnl-2.0 >= 2.0], [has_libnl_ver=2], [ PKG_CHECK_MODULES([LIBNL], [libnl-1], [has_libnl_ver=1], [has_libnl_ver=0])])])
@@ -78,7 +126,11 @@ if (test "$has_libpci" -eq 0); then ]) fi -AC_SEARCH_LIBS([pthread_create], [pthread], [], AC_MSG_ERROR([libpthread is required but was not found]), []) -AC_SEARCH_LIBS([inet_aton], [resolv], [], AC_MSG_ERROR([libresolv is required but was not found]), []) +AC_SEARCH_LIBS([pthread_create], [pthread], [], [ + AC_MSG_ERROR([libpthread is required but was not found]) +], []) +AC_SEARCH_LIBS([inet_aton], [resolv], [], [ + AC_MSG_ERROR([libresolv is required but was not found]) +], []) AC_OUTPUT
Signature · 1 line
2.1.0
Joe Konno
Reviewed-by on v3 1/15Re: [Powertop] [PATCH v3 01/15] configure: use vertical lists
This series was merged 29 Sept, I know, but I had skin in this series, so here's the (belated) review...
LGTM.
Quoted 139 lines · Sami Kerola
Horizontal lists has downside of being managed as a single entry in version control, which makes commits that add and remove items difficult to follow. With vertical lists each entry is managed separately, which is much nicer.
Additionally add project URL to autoconfig init, and pretty print macro expressions to have indentation, and bracing that follows more or less in K&R style.
Signed-off-by Sami Kerola <kerolasa(a)iki.fi>--- configure.ac | 82 +++++++++++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 67 insertions(+), 15 deletions(-)configure.ac +67
-15@@ -2,15 +2,21 @@ # Process this file with autoconf to produce a configure script. AC_PREREQ([2.68]) -AC_INIT([powertop], [2.6.1], [powertop(a)lists.01.org]) -AM_INIT_AUTOMAKE([-Wall foreign ]) +AC_INIT([powertop], [2.6.1], [powertop(a)lists.01.org], [], [https://01.org/powertop]) +AM_INIT_AUTOMAKE([-Wall foreign]) AC_LANG([C++]) -AC_CONFIG_FILES([Makefile src/Makefile traceevent/Makefile po/Makefile.in doc/Makefile]) +AC_CONFIG_FILES([ + Makefile + src/Makefile + traceevent/Makefile + po/Makefile.in + doc/Makefile +]) AC_CONFIG_SRCDIR([src/main.cpp]) AC_CONFIG_MACRO_DIR([m4]) AC_CONFIG_HEADERS([config.h]) GETTEXT_PACKAGE=powertop -AC_SUBST(GETTEXT_PACKAGE) +AC_SUBST([GETTEXT_PACKAGE]) AM_SILENT_RULES([yes]) AM_GNU_GETTEXT([external]) AM_GNU_GETTEXT_VERSION([0.18])@@ -26,7 +32,23 @@ AM_PROG_CC_C_O # Checks for libraries. # Checks for header files. -AC_CHECK_HEADERS([fcntl.h libintl.h limits.h locale.h malloc.h stdint.h stdlib.h string.h sys/ioctl.h sys/socket.h sys/statfs.h sys/time.h termios.h unistd.h ncurses.h]) +AC_CHECK_HEADERS([ \ + fcntl.h \ + libintl.h \ + limits.h \ + locale.h \ + malloc.h \ + ncurses.h \ + stdint.h \ + stdlib.h \ + string.h \ + sys/ioctl.h \ + sys/socket.h \ + sys/statfs.h \ + sys/time.h \ + termios.h \ + unistd.h \ +]) # Checks for typedefs, structures, and compiler characteristics. AC_HEADER_STDBOOL@@ -44,20 +66,46 @@ AC_FUNC_MALLOC AC_FUNC_MMAP AC_FUNC_REALLOC AC_FUNC_STRTOD -AC_CHECK_FUNCS([fdatasync getpagesize gettimeofday memmove memset mkdir munmap pow realpath regcomp select setlocale socket sqrt strcasecmp strchr strdup strerror strncasecmp strstr strtoul strtoull]) +AC_CHECK_FUNCS([ \ + fdatasync \ + getpagesize \ + gettimeofday \ + memmove \ + memset \ + mkdir \ + munmap \ + pow \ + realpath \ + regcomp \ + select \ + setlocale \ + socket \ + sqrt \ + strcasecmp \ + strchr \ + strdup \ + strerror \ + strncasecmp \ + strstr \ + strtoul \ + strtoull \ +]) -PKG_CHECK_MODULES([NCURSES], [ncursesw ncurses], [LIBS="$LIBS $ncurses_LIBS"], - AC_SEARCH_LIBS([delwin], [ncursesw ncurses], [], AC_MSG_ERROR([ncurses is required but was not found]), [])) +PKG_CHECK_MODULES([NCURSES], [ncursesw ncurses], [LIBS="$LIBS $ncurses_LIBS"], [ + AC_SEARCH_LIBS([delwin], [ncursesw ncurses], [], [ + AC_MSG_ERROR([ncurses is required but was not found]) + ], []) +]) has_libpci=0 -PKG_CHECK_MODULES([PCIUTILS], [libpci],[has_libpci=1],[ - AC_SEARCH_LIBS([pci_get_dev], [pci],[has_libpci=1], [has_libpci=0] )]) +PKG_CHECK_MODULES([PCIUTILS], [libpci],[has_libpci=1], [ + AC_SEARCH_LIBS([pci_get_dev], [pci],[has_libpci=1], [has_libpci=0]) +]) has_libnl_ver=0 -# libnl-2 provides only libnl-2.0.pc file, so we check for separate libnl-genl-3.0.pc -# pkg-config file just for libnl-3.0 case. -# +dnl libnl-2 provides only libnl-2.0.pc file, so we check for separate +dnl libnl-genl-3.0.pc pkg-config file just for libnl-3.0 case. PKG_CHECK_MODULES([LIBNL], [libnl-3.0 >= 3.0 libnl-genl-3.0 >= 3.0], [has_libnl_ver=3], [ PKG_CHECK_MODULES([LIBNL], [libnl-2.0 >= 2.0], [has_libnl_ver=2], [ PKG_CHECK_MODULES([LIBNL], [libnl-1], [has_libnl_ver=1], [has_libnl_ver=0])])])@@ -78,7 +126,11 @@ if (test "$has_libpci" -eq 0); then ]) fi -AC_SEARCH_LIBS([pthread_create], [pthread], [], AC_MSG_ERROR([libpthread is required but was not found]), []) -AC_SEARCH_LIBS([inet_aton], [resolv], [], AC_MSG_ERROR([libresolv is required but was not found]), []) +AC_SEARCH_LIBS([pthread_create], [pthread], [], [ + AC_MSG_ERROR([libpthread is required but was not found]) +], []) +AC_SEARCH_LIBS([inet_aton], [resolv], [], [ + AC_MSG_ERROR([libresolv is required but was not found]) +], []) AC_OUTPUT
Sami Kerola
PATCH v3 2/15 configure: prefer AS_IF macro rather than shell if statement
In reply to Sami KerolaJumping in between shell and m4 syntaxes makes reading the code more difficult, so stick to m4 when ever possible.
--- configure.ac | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-)
configure.ac +11 -9
@@ -108,23 +108,25 @@ dnl libnl-2 provides only libnl-2.0.pc file, so we check for separate dnl libnl-genl-3.0.pc pkg-config file just for libnl-3.0 case. PKG_CHECK_MODULES([LIBNL], [libnl-3.0 >= 3.0 libnl-genl-3.0 >= 3.0], [has_libnl_ver=3], [ PKG_CHECK_MODULES([LIBNL], [libnl-2.0 >= 2.0], [has_libnl_ver=2], [ - PKG_CHECK_MODULES([LIBNL], [libnl-1], [has_libnl_ver=1], [has_libnl_ver=0])])]) -if (test "$has_libnl_ver" -eq 0); then - AC_MSG_ERROR(libnl and libnl-genl are required but were not found) -fi -if (test "$has_libnl_ver" -gt 1); then + PKG_CHECK_MODULES([LIBNL], [libnl-1], [has_libnl_ver=1], [has_libnl_ver=0]) + ]) +]) +AS_IF([test "$has_libnl_ver" -eq 0], [ + AC_MSG_ERROR([libnl and libnl-genl are required but were not found]) +]) +AS_IF([test "$has_libnl_ver" -gt 1], [ AC_DEFINE([HAVE_LIBNL20], [1], [Define if you have libnl-2.0 or higher]) -fi +]) -if (test "$has_libpci" -eq 0); then - AC_DEFINE([HAVE_NO_PCI],[1],[Define if pci is not supported]) +AS_IF([test "$has_libpci" -eq 0], [ + AC_DEFINE([HAVE_NO_PCI], [1], [Define if pci is not supported]) AC_MSG_WARN([ ************* LIBPCI SUPPORT NOT CONFIGURED************** If you need or want pci support, please install libpci and re-configure PowerTOP. ********************************************************* ]) -fi +]) AC_SEARCH_LIBS([pthread_create], [pthread], [], [ AC_MSG_ERROR([libpthread is required but was not found])
Signature · 1 line
2.1.0
Joe Konno
Reviewed-by on v3 2/15Re: [Powertop] [PATCH v3 02/15] configure: prefer AS_IF macro rather than shell if statement
LGTM.
Quoted 48 lines · Sami Kerola
Jumping in between shell and m4 syntaxes makes reading the code more difficult, so stick to m4 when ever possible.
Signed-off-by Sami Kerola <kerolasa(a)iki.fi>--- configure.ac | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-)configure.ac +11
-9@@ -108,23 +108,25 @@ dnl libnl-2 provides only libnl-2.0.pc file, so we check for separate dnl libnl-genl-3.0.pc pkg-config file just for libnl-3.0 case. PKG_CHECK_MODULES([LIBNL], [libnl-3.0 >= 3.0 libnl-genl-3.0 >= 3.0], [has_libnl_ver=3], [ PKG_CHECK_MODULES([LIBNL], [libnl-2.0 >= 2.0], [has_libnl_ver=2], [ - PKG_CHECK_MODULES([LIBNL], [libnl-1], [has_libnl_ver=1], [has_libnl_ver=0])])]) -if (test "$has_libnl_ver" -eq 0); then - AC_MSG_ERROR(libnl and libnl-genl are required but were not found) -fi -if (test "$has_libnl_ver" -gt 1); then + PKG_CHECK_MODULES([LIBNL], [libnl-1], [has_libnl_ver=1], [has_libnl_ver=0]) + ]) +]) +AS_IF([test "$has_libnl_ver" -eq 0], [ + AC_MSG_ERROR([libnl and libnl-genl are required but were not found]) +]) +AS_IF([test "$has_libnl_ver" -gt 1], [ AC_DEFINE([HAVE_LIBNL20], [1], [Define if you have libnl-2.0 or higher]) -fi +]) -if (test "$has_libpci" -eq 0); then - AC_DEFINE([HAVE_NO_PCI],[1],[Define if pci is not supported]) +AS_IF([test "$has_libpci" -eq 0], [ + AC_DEFINE([HAVE_NO_PCI], [1], [Define if pci is not supported]) AC_MSG_WARN([ ************* LIBPCI SUPPORT NOT CONFIGURED************** If you need or want pci support, please install libpci and re-configure PowerTOP. ********************************************************* ]) -fi +]) AC_SEARCH_LIBS([pthread_create], [pthread], [], [ AC_MSG_ERROR([libpthread is required but was not found])
Sami Kerola
PATCH v3 3/15 add src/cpu/rapl/.deps to .gitignore
In reply to Sami Kerola--- .gitignore | 1 + 1 file changed, 1 insertion(+)
.gitignore +1 -0
@@ -44,6 +44,7 @@ src/.deps/ src/Makefile src/calibrate/.deps/ src/cpu/.deps/ +src/cpu/rapl/.deps src/devices/.deps/ src/measurement/.deps/ src/parameters/.deps/
Signature · 1 line
2.1.0
Joe Konno
Reviewed-by on v3 3/15Re: [Powertop] [PATCH v3 03/15] add src/cpu/rapl/.deps to .gitignore
LGTM.
Quoted 18 lines · Sami Kerola
Signed-off-by Sami Kerola <kerolasa(a)iki.fi>--- .gitignore | 1 + 1 file changed, 1 insertion(+).gitignore +1
-0@@ -44,6 +44,7 @@ src/.deps/ src/Makefile src/calibrate/.deps/ src/cpu/.deps/ +src/cpu/rapl/.deps src/devices/.deps/ src/measurement/.deps/ src/parameters/.deps/
Sami Kerola
PATCH v3 4/15 clean up Makefile.am files
In reply to Sami KerolaUse vertical rather than horizontal lists, and get rid of deprecated ACLOCAL_AMFLAGS instruction. The src/Makefile.am source file list also needed sorting, as the items order seemed more or less random.
--- Makefile.am | 14 +++- src/Makefile.am | 193 +++++++++++++++++++++++++++++++++++++++++++------------- 2 files changed, 161 insertions(+), 46 deletions(-)
Makefile.am +11 -3
@@ -1,6 +1,14 @@ AUTOMAKE_OPTIONS = subdir-objects -ACLOCAL_AMFLAGS = -I m4 -SUBDIRS = traceevent src po doc +SUBDIRS = \ + traceevent \ + src \ + po \ + doc -EXTRA_DIST = README TODO Android.mk COPYING autogen.sh +EXTRA_DIST = \ + README \ + TODO \ + Android.mk \ + COPYING \ + autogen.sh
src/Makefile.am +150 -43
204 lines not on this page · raw message
Signature · 1 line
2.1.0
Joe Konno
Reviewed-by on v3 4/15Re: [Powertop] [PATCH v3 04/15] clean up Makefile.am files
Trivial nit, otherwise LGTM.
Quoted 86 lines · Sami Kerola
Use vertical rather than horizontal lists, and get rid of deprecated
ACLOCAL_AMFLAGSinstruction. The src/Makefile.am source file list also needed sorting, as the items order seemed more or less random.Signed-off-by Sami Kerola <kerolasa(a)iki.fi>--- Makefile.am | 14 +++- src/Makefile.am | 193 +++++++++++++++++++++++++++++++++++++++++++------------- 2 files changed, 161 insertions(+), 46 deletions(-)Makefile.am +11
-3@@ -1,6 +1,14 @@ AUTOMAKE_OPTIONS = subdir-objects -ACLOCAL_AMFLAGS = -I m4 -SUBDIRS = traceevent src po doc +SUBDIRS = \ + traceevent \ + src \ + po \ + doc -EXTRA_DIST = README TODO Android.mk COPYING autogen.sh +EXTRA_DIST = \ + README \ + TODO \ + Android.mk \ + COPYING \ + autogen.shsrc/Makefile.am +1
-43@@ -1,54 +1,161 @@ AUTOMAKE_OPTIONS = subdir-objects -ACLOCAL_AMFLAGS = -I ../m4 sbin_PROGRAMS = powertop nodist_powertop_SOURCES = css.h -powertop_SOURCES = parameters/persistent.cpp parameters/learn.cpp parameters/parameters.cpp \ - parameters/parameters.h display.cpp cpu/cpu_core.cpp cpu/cpudevice.cpp \ - cpu/cpu.cpp cpu/cpu.h cpu/cpu_linux.cpp cpu/abstract_cpu.cpp cpu/intel_cpus.h \ - cpu/cpu_package.cpp cpu/cpudevice.h cpu/intel_cpus.cpp devlist.h devlist.cpp \ - lib.cpp report/report.cpp process/process.cpp process/interrupt.h process/timer.h \ - process/processdevice.cpp process/powerconsumer.cpp process/work.h \ - process/timer.cpp process/process.h process/work.cpp process/do_process.cpp \ - process/processdevice.h process/interrupt.cpp process/powerconsumer.h report/report.h \ - perf/perf.cpp perf/perf_event.h perf/perf.h perf/perf_bundle.h perf/perf_bundle.cpp \ - display.h devices/rfkill.h devices/i915-gpu.cpp devices/device.cpp devices/alsa.cpp \ - devices/runtime_pm.cpp devices/thinkpad-fan.cpp devices/usb.cpp devices/ahci.cpp \ - devices/thinkpad-light.cpp devices/ahci.h devices/i915-gpu.h devices/network.h \ - devices/rfkill.cpp devices/alsa.h devices/thinkpad-fan.h devices/device.h \ - devices/usb.h devices/backlight.h devices/backlight.cpp devices/runtime_pm.h \ - devices/thinkpad-light.h devices/network.cpp lib.h \ - tuning/bluetooth.cpp tuning/tuning.cpp tuning/tuningusb.cpp \ - tuning/ethernet.cpp tuning/bluetooth.h tuning/tuning.h tuning/ethernet.h \ - tuning/tunable.cpp tuning/nl80211.h tuning/iw.c tuning/wifi.cpp tuning/tuningsysfs.h \ - tuning/tuningsysfs.cpp tuning/wifi.h tuning/runtime.cpp tuning/tunable.h \ - tuning/runtime.h tuning/tuningusb.h tuning/iw.h calibrate/calibrate.cpp \ - calibrate/calibrate.h measurement/measurement.cpp \ - measurement/measurement.h measurement/acpi.cpp measurement/sysfs.h measurement/sysfs.cpp \ - measurement/acpi.h measurement/extech.cpp measurement/extech.h \ - report/report-maker.cpp report/report-maker.h report/report-formatter.h \ - report/report-formatter-base.cpp report/report-formatter-base.h \ - report/report-formatter-csv.cpp report/report-formatter-csv.h \ - report/report-formatter-html.cpp report/report-formatter-html.h \ - report/report-data-html.cpp report/report-data-html.h \ - main.cpp css.h powertop.css cpu/intel_gpu.cpp \ - cpu/rapl/rapl_interface.cpp cpu/cpu_rapl_device.cpp cpu/rapl/rapl_interface.h\ - cpu/dram_rapl_device.cpp devices/gpu_rapl_device.cpp cpu/cpu_rapl_device.h \ - cpu/dram_rapl_device.h devices/gpu_rapl_device.h - - -powertop_CXXFLAGS = -fno-omit-frame-pointer -fstack-protector -Wall -Wshadow -Wformat $(NCURSES_CFLAGS) $(PCIUTILS_CFLAGS) $(LIBNL_CFLAGS) $(GLIB2_CFLAGS) - - -powertop_CPPFLAGS = -D_FORTIFY_SOURCE=2 $(NCURSES_CFLAGS) $(PCIUTILS_CFLAGS) $(LIBNL_CFLAGS) $(GLIB2_CFLAGS) $(LIBZ_CFLAGS) -DLOCALEDIR=\"$(localedir)\" - -powertop_LDADD = ../traceevent/libtraceevnet.la - -AM_LDFLAGS = $(LIBS) $(NCURSES_LIBS) $(PCIUTILS_LIBS) $(LIBNL_LIBS) $(LIBZ_LIBS) $(PTHREAD_LIBS) $(RESOLV_LIBS) +powertop_SOURCES = \
src/Makefile.am line 16
Quoted 10 lines
src/Makefile.am +10
-0+ css.h \ + devlist.cpp \ + devlist.h \ + display.cpp \ + display.h \ + lib.cpp \ + lib.h \ + main.cpp \ + powertop.css \ + \
Why the white line here?
Quoted 146 lines
src/Makefile.am +139
-0+ calibrate/calibrate.cpp \ + calibrate/calibrate.h \ + cpu/abstract_cpu.cpp \ + cpu/cpu.cpp \ + cpu/cpu.h \ + cpu/cpu_core.cpp \ + cpu/cpu_linux.cpp \ + cpu/cpu_package.cpp \ + cpu/cpu_rapl_device.cpp \ + cpu/cpu_rapl_device.h \ + cpu/cpudevice.cpp \ + cpu/cpudevice.h \ + cpu/dram_rapl_device.cpp \ + cpu/dram_rapl_device.h \ + cpu/intel_cpus.cpp \ + cpu/intel_cpus.h \ + cpu/intel_gpu.cpp \ + cpu/rapl/rapl_interface.cpp \ + cpu/rapl/rapl_interface.h \ + devices/ahci.cpp \ + devices/ahci.h \ + devices/alsa.cpp \ + devices/alsa.h \ + devices/backlight.cpp \ + devices/backlight.h \ + devices/device.cpp \ + devices/device.h \ + devices/gpu_rapl_device.cpp \ + devices/gpu_rapl_device.h \ + devices/i915-gpu.cpp \ + devices/i915-gpu.h \ + devices/network.cpp \ + devices/network.h \ + devices/rfkill.cpp \ + devices/rfkill.h \ + devices/runtime_pm.cpp \ + devices/runtime_pm.h \ + devices/thinkpad-fan.cpp \ + devices/thinkpad-fan.h \ + devices/thinkpad-light.cpp \ + devices/thinkpad-light.h \ + devices/usb.cpp \ + devices/usb.h \ + measurement/acpi.cpp \ + measurement/acpi.h \ + measurement/extech.cpp \ + measurement/extech.h \ + measurement/measurement.cpp \ + measurement/measurement.h \ + measurement/sysfs.cpp \ + measurement/sysfs.h \ + parameters/learn.cpp \ + parameters/parameters.cpp \ + parameters/parameters.h \ + parameters/persistent.cpp \ + perf/perf.cpp \ + perf/perf.h \ + perf/perf_bundle.cpp \ + perf/perf_bundle.h \ + perf/perf_event.h \ + process/do_process.cpp \ + process/interrupt.cpp \ + process/interrupt.h \ + process/powerconsumer.cpp \ + process/powerconsumer.h \ + process/process.cpp \ + process/process.h \ + process/processdevice.cpp \ + process/processdevice.h \ + process/timer.cpp \ + process/timer.h \ + process/work.cpp \ + process/work.h \ + report/report-data-html.cpp \ + report/report-data-html.h \ + report/report-formatter-base.cpp \ + report/report-formatter-base.h \ + report/report-formatter-csv.cpp \ + report/report-formatter-csv.h \ + report/report-formatter-html.cpp \ + report/report-formatter-html.h \ + report/report-formatter.h \ + report/report-maker.cpp \ + report/report-maker.h \ + report/report.cpp \ + report/report.h \ + tuning/bluetooth.cpp \ + tuning/bluetooth.h \ + tuning/ethernet.cpp \ + tuning/ethernet.h \ + tuning/iw.c \ + tuning/iw.h \ + tuning/nl80211.h \ + tuning/runtime.cpp \ + tuning/runtime.h \ + tuning/tunable.cpp \ + tuning/tunable.h \ + tuning/tuning.cpp \ + tuning/tuning.h \ + tuning/tuningsysfs.cpp \ + tuning/tuningsysfs.h \ + tuning/tuningusb.cpp \ + tuning/tuningusb.h \ + tuning/wifi.cpp \ + tuning/wifi.h + +powertop_CXXFLAGS = \ + -Wall \ + -Wformat \ + -Wshadow \ + -fno-omit-frame-pointer \ + -fstack-protector \ + $(GLIB2_CFLAGS) \ + $(LIBNL_CFLAGS) \ + $(NCURSES_CFLAGS) \ + $(PCIUTILS_CFLAGS) + + +powertop_CPPFLAGS = \ + -DLOCALEDIR=\"$(localedir)\" \ + -D_FORTIFY_SOURCE=2 \ + $(GLIB2_CFLAGS) \ + $(LIBNL_CFLAGS) \ + $(LIBZ_CFLAGS) \ + $(NCURSES_CFLAGS) \ + $(PCIUTILS_CFLAGS) + +powertop_LDADD = \ + ../traceevent/libtraceevnet.la + +AM_LDFLAGS = \ + $(LIBNL_LIBS) \ + $(LIBS) \ + $(LIBZ_LIBS) \ + $(NCURSES_LIBS) \ + $(PCIUTILS_LIBS) \ + $(PTHREAD_LIBS) \ + $(RESOLV_LIBS) BUILT_SOURCES = css.h CLEANFILES = css.h + css.h: powertop.css $(SHELL) ${srcdir}/csstoh.sh ${srcdir}/powertop.css css.h
Sami Kerola
Re: [Powertop] [PATCH v3 04/15] clean up Makefile.am files
Quoted 1 line · Joe Konno
On 09/07/2014 02:27 PM, Sami Kerola wrote:
[snip]
Quoted 2 lines
Quoted 2 lines
--- Makefile.am | 14 +++-
[snip]
Quoted 12 lines
src/Makefile.am line 16
Quoted 11 lines
src/Makefile.am +11
-0+powertop_SOURCES = \ + css.h \ + devlist.cpp \ + devlist.h \ + display.cpp \ + display.h \ + lib.cpp \ + lib.h \ + main.cpp \ + powertop.css \ + \
Quoted 1 line
Why the white line here?
To separate src/*.(cpp|h) file from files in sub-directory targets the way one very clearly see the difference. Sorting all the targets in simple alphabetical order would make the none-sub-directory objects to be here and there in middle of listing, so separating the lists seemed like clarity enhancement to me. If the empty line really annoys send a patch to remove it, I don't have too strong opinions either in favor or against it.
Signature · 2 lines
Sami Kerola http://www.iki.fi/kerolasa/
Sergey Senozhatsky
Re: [Powertop] [PATCH v3 04/15] clean up Makefile.am files
Quoted 17 lines · Sami Kerola
Quoted 2 lines
Quoted 2 lines
--- Makefile.am | 14 +++-[snip]
Quoted 12 lines
src/Makefile.am line 16
Quoted 11 lines
src/Makefile.am +11
-0+powertop_SOURCES = \ + css.h \ + devlist.cpp \ + devlist.h \ + display.cpp \ + display.h \ + lib.cpp \ + lib.h \ + main.cpp \ + powertop.css \ + \Quoted 1 line
Why the white line here?
Quoted 8 lines
To separate src/*.(cpp|h) file from files in sub-directory targets the way one very clearly see the difference. Sorting all the targets in simple alphabetical order would make the none-sub-directory objects to be here and there in middle of listing, so separating the lists seemed like clarity enhancement to me. If the empty line really annoys send a patch to remove it, I don't have too strong opinions either in favor or against it.
:-)
guys, this is Makefile.am
nobody goes there.
-ss
Sami Kerola
PATCH v3 5/15 fix clang++ compilation errors
In reply to Sami KerolaThe same error was fixed in multiple files to made clang++ work.
error: variable length array of non-POD element type 'string' (aka 'basic_string<char>')
--- src/cpu/cpu.cpp | 18 ++++++++++++------ src/devices/ahci.cpp | 3 ++- src/devices/device.cpp | 6 ++++-- src/devlist.cpp | 3 ++- src/process/do_process.cpp | 9 ++++++--- src/report/report.cpp | 3 ++- src/tuning/tuning.cpp | 10 ++++++---- 7 files changed, 34 insertions(+), 18 deletions(-)
src/cpu/cpu.cpp +12 -6
@@ -479,12 +479,12 @@ void report_display_cpu_cstates(void) /* Tables for PKG, CORE, CPU */ pkg_tbl_size.cols=2; pkg_tbl_size.rows= ((cstates_num+1)-LEVEL_HEADER)+1; - string pkg_data[pkg_tbl_size.cols * pkg_tbl_size.rows]; + string *pkg_data = new string[pkg_tbl_size.cols * pkg_tbl_size.rows]; core_tbl_size.cols=2; core_tbl_size.rows=(cstates_num *_package->children.size()) + _package->children.size(); - string core_data[core_tbl_size.cols * core_tbl_size.rows]; + string *core_data = new string[core_tbl_size.cols * core_tbl_size.rows]; int num_cpus=0, num_cores=0; for (core = 0; core < _package->children.size(); core++) {
@@ -506,7 +506,7 @@ void report_display_cpu_cstates(void) cpu_tbl_size.cols=(2 * (num_cpus / num_cores)) + 1; cpu_tbl_size.rows = ((cstates_num+1-LEVEL_HEADER) * _package->children.size()) + _package->children.size(); - string cpu_data[cpu_tbl_size.cols * cpu_tbl_size.rows]; + string *cpu_data = new string[cpu_tbl_size.cols * cpu_tbl_size.rows]; for (core = 0; core < _package->children.size(); core++) { cpu_data[idx3]=" ";
@@ -633,6 +633,9 @@ void report_display_cpu_cstates(void) init_cpu_table_attr(&std_table_css, title+1, cpu_tbl_size.rows, cpu_tbl_size.cols); report.add_table(cpu_data, &std_table_css); + delete [] pkg_data; + delete [] core_data; + delete [] cpu_data; } report.end_div(); }
@@ -688,11 +691,11 @@ void report_display_cpu_pstates(void) /* Tables for PKG, CORE, CPU */ pkg_tbl_size.cols=2; pkg_tbl_size.rows=((pstates_num+1)-LEVEL_HEADER)+2; - string pkg_data[pkg_tbl_size.cols * pkg_tbl_size.rows]; + string *pkg_data = new string[pkg_tbl_size.cols * pkg_tbl_size.rows]; core_tbl_size.cols=2; core_tbl_size.rows=((pstates_num+2) *_package->children.size()); - string core_data[core_tbl_size.cols * core_tbl_size.rows]; + string *core_data = new string[core_tbl_size.cols * core_tbl_size.rows]; /* PKG */ num_cpus=0;
@@ -717,7 +720,7 @@ void report_display_cpu_pstates(void) cpu_tbl_size.cols= (num_cpus/ num_cores) + 1; cpu_tbl_size.rows= (pstates_num+2) * _package->children.size() + _package->children.size(); - string cpu_data[cpu_tbl_size.cols * cpu_tbl_size.rows]; + string *cpu_data = new string[cpu_tbl_size.cols * cpu_tbl_size.rows]; /* Core */ for (core = 0; core < _package->children.size(); core++) {
@@ -818,6 +821,9 @@ void report_display_cpu_pstates(void) init_cpu_table_attr(&std_table_css, title, cpu_tbl_size.rows, cpu_tbl_size.cols); report.add_table(cpu_data, &std_table_css); + delete [] pkg_data; + delete [] core_data; + delete [] cpu_data; } report.end_div(); }
src/devices/ahci.cpp +2 -1
@@ -384,7 +384,7 @@ void ahci_create_device_stats_table(void) /* Set array of data in row Major order */ - string ahci_data[cols * rows]; + string *ahci_data = new string[cols * rows]; ahci_data[0]=__("Link"); ahci_data[1]=__("Active"); ahci_data[2]=__("Partial");
@@ -398,6 +398,7 @@ void ahci_create_device_stats_table(void) report.add_title(&title_attr, __("AHCI ALPM Residency Statistics")); report.add_table(ahci_data, &std_table_css); report.end_div(); + delete [] ahci_data; } void ahci::report_device_stats(string *ahci_data, int idx)
src/devices/device.cpp +4 -2
@@ -247,7 +247,7 @@ void show_report_devices(void) /* Device Summary */ int summary_size=2; - string summary[summary_size]; + string *summary = new string[summary_size]; pw = global_joules_consumed(); char buf[32]; if (pw > 0.0001) {
@@ -263,9 +263,10 @@ void show_report_devices(void) summary[1].append(" W"); report.add_summary_list(summary, summary_size); } + delete [] summary; /* Set array of data in row Major order */ - string device_data[cols * rows]; + string *device_data = new string[cols * rows]; device_data[0]= __("Usage"); device_data[1]= __("Device Name"); if (show_power)
@@ -308,6 +309,7 @@ void show_report_devices(void) /* Report Output */ report.add_title(&title_attr, __("Device Power Report")); report.add_table(device_data, &std_table_css); + delete [] device_data; }
src/devlist.cpp +2 -1
@@ -326,7 +326,7 @@ void report_show_open_devices(void) init_title_attr(&title_attr); /* Set array of data in row Major order */ - string process_data[cols * rows]; + string *process_data = new string[cols * rows]; sort(target->begin(), target->end(), devlist_sort); process_data[0]=__("Process");
@@ -348,5 +348,6 @@ void report_show_open_devices(void) /* No div attribute here inherits from device power report */ report.add_title(&title_attr, __("Process Device Activity")); report.add_table(process_data, &std_table_css); + delete [] process_data; report.end_div(); }
src/process/do_process.cpp +6 -3
@@ -918,7 +918,7 @@ void report_process_update_display(void) init_title_attr(&title_attr); /* Set array of data in row Major order */ - string software_data[cols * rows]; + string *software_data = new string[cols * rows]; software_data[0]=__("Usage"); software_data[1]=__("Wakeups/s"); software_data[2]=__("GPU ops/s");
@@ -1013,6 +1013,7 @@ void report_process_update_display(void) report.add_title(&title_attr, __("Overview of Software Power Consumers")); report.add_table(software_data, &std_table_css); report.end_div(); + delete [] software_data; } void report_summary(void)
@@ -1048,7 +1049,7 @@ void report_summary(void) /* Set array for summary */ int summary_size =12; - string summary[summary_size]; + string *summary = new string [summary_size]; summary[0]=__("Target:"); summary[1]=__("1 units/s"); summary[2]=__("System: ");
@@ -1068,7 +1069,7 @@ void report_summary(void) summary[11].append(__(" ops/s")); /* Set array of data in row Major order */ - string summary_data[cols * (rows+1)]; + string *summary_data = new string[cols * (rows + 1)]; summary_data[0]=__("Usage"); summary_data[1]=__("Events/s"); summary_data[2]=__("Category");
@@ -1134,6 +1135,8 @@ void report_summary(void) report.add_title(&title_attr, __("Top 10 Power Consumers")); report.add_table(summary_data, &std_table_css); report.end_div(); + delete [] summary; + delete [] summary_data; }
src/report/report.cpp +2 -1
@@ -115,7 +115,7 @@ static void system_info(void) init_title_attr(&title_attr); /* Set array of data in row Major order */ - string system_data[sys_table.rows * sys_table.cols]; + string *system_data = new string[sys_table.rows * sys_table.cols]; system_data[0]=__("PowerTOP Version"); system_data[1]=POWERTOP_VERSION;
@@ -159,6 +159,7 @@ static void system_info(void) report.end_div(); report.end_header(); report.add_navigation(); + delete [] system_data; } void init_report_output(char *filename_str, int iterations)
src/tuning/tuning.cpp +6 -4
@@ -230,7 +230,7 @@ void report_show_tunables(void) init_tune_table_attr(&tune_table_css, rows, cols); /* Set array of data in row Major order */ - string tunable_data[cols * rows]; + string *tunable_data = new string[cols * rows]; tunable_data[0]=__("Description"); tunable_data[1]=__("Script");
@@ -249,6 +249,7 @@ void report_show_tunables(void) /* Report Output */ report.add_title(&title_attr,__("Software Settings in Need of Tuning")); report.add_table(tunable_data, &tune_table_css); + delete [] tunable_data; } /* Second Table */
@@ -258,7 +259,7 @@ void report_show_tunables(void) init_tune_table_attr(&tune_table_css, rows, cols); /* Set array of data in row Major order */ - string untunable_data[rows]; + string *untunable_data = new string[rows]; untunable_data[0]=__("Description"); for (i = 0; i < all_untunables.size(); i++)
@@ -267,6 +268,7 @@ void report_show_tunables(void) /* Report Output */ report.add_title(&title_attr,__("Untunable Software Issues")); report.add_table(untunable_data, &tune_table_css); + delete [] untunable_data; /* Third Table */ /* Set Table attributes, rows, and cols */
@@ -275,7 +277,7 @@ void report_show_tunables(void) init_std_table_attr(&tune_table_css, rows, cols); /* Set array of data in row Major order */ - string tuned_data[rows]; + string *tuned_data = new string[rows]; tuned_data[0]=__("Description"); idx=cols; for (i = 0; i < all_tunables.size(); i++) {
@@ -291,7 +293,7 @@ void report_show_tunables(void) report.add_title(&title_attr,__("Optimal Tuned Software Settings")); report.add_table(tuned_data, &tune_table_css); report.end_div(); - + delete [] tuned_data; } void clear_tuning()
Signature · 1 line
2.1.0
Andreas Mohr
Re: [Powertop] [PATCH v3 05/15] fix clang++ compilation errors
Hi,
Quoted 39 lines · On Sun, Sep 07, 2014 at 02:28:11PM -0700, powertop-request(a)lists.01.org wrote:
Date: Sun, 7 Sep 2014 22:27:08 +0100
From: Sami Kerola <kerolasa(a)iki.fi>The same error was fixed in multiple files to made clang++ work.
error: variable length array of non-POD element type 'string' (aka 'basic_string<char>')
Signed-off-by Sami Kerola <kerolasa(a)iki.fi>src/cpu/cpu.cpp +3
-3@@ -479,12 +479,12 @@ void report_display_cpu_cstates(void) /* Tables for PKG, CORE, CPU */ pkg_tbl_size.cols=2; pkg_tbl_size.rows= ((cstates_num+1)-LEVEL_HEADER)+1; - string pkg_data[pkg_tbl_size.cols * pkg_tbl_size.rows]; + string *pkg_data = new string[pkg_tbl_size.cols * pkg_tbl_size.rows]; core_tbl_size.cols=2; core_tbl_size.rows=(cstates_num *_package->children.size()) + _package->children.size(); - string core_data[core_tbl_size.cols * core_tbl_size.rows]; + string *core_data = new string[core_tbl_size.cols * core_tbl_size.rows]; int num_cpus=0, num_cores=0; for (core = 0; core < _package->children.size(); core++) {@@ -506,7 +506,7 @@ void report_display_cpu_cstates(void) cpu_tbl_size.cols=(2 * (num_cpus / num_cores)) + 1; cpu_tbl_size.rows = ((cstates_num+1-LEVEL_HEADER) * _package->children.size()) + _package->children.size(); - string cpu_data[cpu_tbl_size.cols * cpu_tbl_size.rows]; + string *cpu_data = new string[cpu_tbl_size.cols * cpu_tbl_size.rows]; for (core = 0; core < _package->children.size(); core++) { cpu_data[idx3]=" ";
src/cpu/cpu.cpp void report_display_cpu_cstates(void) · line 641
Quoted 9 lines
src/cpu/cpu.cpp +3
-0@@ -633,6 +633,9 @@ void report_display_cpu_cstates(void) init_cpu_table_attr(&std_table_css, title+1, cpu_tbl_size.rows, cpu_tbl_size.cols); report.add_table(cpu_data, &std_table_css); + delete [] pkg_data; + delete [] core_data; + delete [] cpu_data; } report.end_div(); }
As a C++ developer with certain experience of sometimes (very) painful quality(the last VERY PAINFUL one less than 6 weeks ago...), I really wouldn't want to see open-coded, error-prone new/delete (or, heaven forbid, malloc/free used in C++ code) in new (pun not intended) code anywhere - nor non-scoped (omission-prone, return-hampered, exception-unsafe) handling
of any other, possibly more critical resources (think locks, files, ...).
Therefore I'd strongly recommend changing this patch
into using properly scoped resource handling such as std::vector
(std::array should also work, but since that is C++11 only
I'd prefer std::vector).
And possibly plus handling of std::bad_alloc cases, in this or outer scope...
Put differently, one could even say
that given an automated commit review system
any appearance of new/delete should automatically make the review fail, with subsequent manual white-listing needed for the few rare cases that do really want to have it (think class-internal handling of resources, or some such).
That said, thank you very much for enabling clang++ compatibility, and for all the other fixes!
I had wanted to venture into such areas myself, too
(e.g. for C++ diagnosis reasons), but simply haven't found the time yet.
Andreas Mohr
Alexandra Yates
Re: [Powertop] [PATCH v3 05/15] fix clang++ compilation errors
Quoted 86 lines
Hi,
Quoted 41 lines · On Sun, Sep 07, 2014 at 02:28:11PM -0700, powertop-request(a)lists.01.org wrote:
Date: Sun, 7 Sep 2014 22:27:08 +0100
From: Sami Kerola <kerolasa(a)iki.fi>The same error was fixed in multiple files to made clang++ work.
error: variable length array of non-POD element type 'string' (aka 'basic_string<char>')
Signed-off-by Sami Kerola <kerolasa(a)iki.fi>src/cpu/cpu.cpp +2
-2@@ -479,12 +479,12 @@ void report_display_cpu_cstates(void) /* Tables for PKG, CORE, CPU */ pkg_tbl_size.cols=2; pkg_tbl_size.rows= ((cstates_num+1)-LEVEL_HEADER)+1; - string pkg_data[pkg_tbl_size.cols * pkg_tbl_size.rows]; + string *pkg_data = new string[pkg_tbl_size.cols * pkg_tbl_size.rows]; core_tbl_size.cols=2; core_tbl_size.rows=(cstates_num *_package->children.size()) + _package->children.size(); - string core_data[core_tbl_size.cols * core_tbl_size.rows]; + string *core_data = new string[core_tbl_size.cols * core_tbl_size.rows]; int num_cpus=0, num_cores=0;src/cpu/cpu.cpp +1
-1for (core = 0; core < _package->children.size(); core++) {@@ -506,7 +506,7 @@ void report_display_cpu_cstates(void) cpu_tbl_size.cols=(2 * (num_cpus / num_cores)) + 1; cpu_tbl_size.rows = ((cstates_num+1-LEVEL_HEADER) * _package->children.size()) + _package->children.size(); - string cpu_data[cpu_tbl_size.cols * cpu_tbl_size.rows]; + string *cpu_data = new string[cpu_tbl_size.cols * cpu_tbl_size.rows]; for (core = 0; core < _package->children.size(); core++) {src/cpu/cpu.cpp +0
-0cpu_data[idx3]=" ";src/cpu/cpu.cpp void report_display_cpu_cstates(void) · line 641
Quoted 9 lines
src/cpu/cpu.cpp +3
-0@@ -633,6 +633,9 @@ void report_display_cpu_cstates(void) init_cpu_table_attr(&std_table_css, title+1, cpu_tbl_size.rows, cpu_tbl_size.cols); report.add_table(cpu_data, &std_table_css); + delete [] pkg_data; + delete [] core_data; + delete [] cpu_data; } report.end_div(); }As a C++ developer with certain experience of sometimes (very) painful quality(the last VERY PAINFUL one less than 6 weeks ago...), I really wouldn't want to see open-coded, error-prone new/delete (or, heaven forbid, malloc/free used in C++ code) in new (pun not intended) code anywhere -
nor non-scoped (omission-prone, return-hampered, exception-unsafe) handling
of any other, possibly more critical resources (think locks, files, ...). Therefore I'd strongly recommend changing this patch
into using properly scoped resource handling such asstd::vector(std::arrayshould also work, but since that is C++11 only I'd preferstd::vector).
And possibly plus handling ofstd::bad_alloccases, in this or outer scope...Put differently, one could even say
that given an automated commit review system
any appearance of new/delete should automatically make the review fail, with subsequent manual white-listing needed for the few rare cases that do really want to have it (think class-internal handling of resources,
or some such).That said, thank you very much for enabling clang++ compatibility, and for all the other fixes!
I had wanted to venture into such areas myself, too
(e.g. for C++ diagnosis reasons), but simply haven't found the time yet.
Quoted 6 lines
Andreas Mohr
_______________________________________________
PowerTop mailing list
PowerTop(a)lists.01.org
https://lists.01.org/mailman/listinfo/powertop
Andreas, feel free to submit a patch with this fix.
Thank you,
Alexandra.
Andreas Mohr
Re: [Powertop] [PATCH v3 05/15] fix clang++ compilation errors
Hi,
Quoted 12 lines · Alexandra Yates
Quoted 12 lines
any appearance of new/delete should automatically make the review fail, with subsequent manual white-listing needed for the few rare cases that do really want to have it (think class-internal handling of resources,
or some such).That said, thank you very much for enabling clang++ compatibility, and for all the other fixes!
I had wanted to venture into such areas myself, too
(e.g. for C++ diagnosis reasons), but simply haven't found the time yet.
Quoted 8 lines
Quoted 6 lines
Andreas Mohr
_______________________________________________
PowerTop mailing list
PowerTop(a)lists.01.org
https://lists.01.org/mailman/listinfo/powertopAndreas, feel free to submit a patch with this fix.
Right, that seems like a good idea
(although it's quite a bit of effort,
and all these areas have been committed now unfortunately).
I started to dive into it (did git pull of my existing
https://github.com/fenrus75/powertop ), but immediately hit a snag:
README said that I should apply the usual UNIX prayer of
./configure
make
make install
which obviously wasn't possible since in this repo-only content the automake step was not done (likely rightfully, I think, since these things should nicely fit the local environment, but then it should still have been explained in the README).
Running automake then failed (again!! Somehow I knew it, since these things magically have a tendency to fail almost always...):
# ./autogen.sh autoreconf: Entering directory `.' autoreconf: running: autopoint autoreconf: running: aclocal --output=aclocal.m4t aclocal: configure.ac: 20: macro `AM_SILENT_RULES' not found in library aclocal: macro `AM_PROG_MKDIR_P' required but not defined aclocal: macro `AM_PROG_MKDIR_P' required but not defined aclocal: macro `_LT_DECL_SED' required but not defined aclocal: macro `_LT_FUNC_STRIPNAME_CNF' required but not defined autoreconf: aclocal failed with exit status: 1
to which https://forum.videolan.org/viewtopic.php?f=13&t=84261
had the following wise words to say: "Use automake 1.11".
Fortunately there's an automake1.11 package on Debian, however there's also of course the "standard", "canonical version" "automake" package (oh darnit - which I currently don't even have installed, oops... can you tell that I'm a CMake guy already? ;)). So, since I only had older specific-version automake packages installed (a sufficiently medieval automake1.7),,
I installed the generic, version-progressing one.
But it still used the old version prior to an
update-alternatives --config automake
, at which point it worked.
So, now that this is documented for other people to be helped,
on to documenting README omissions and working on the scoped array handling commit.
Andreas Mohr
Sami Kerola
Re: [Powertop] [PATCH v3 05/15] fix clang++ compilation errors
Quoted 67 lines · Andreas Mohr
Quoted 12 lines · Alexandra Yates
Quoted 12 lines
any appearance of new/delete should automatically make the review fail, with subsequent manual white-listing needed for the few rare cases that do really want to have it (think class-internal handling of resources,
or some such).That said, thank you very much for enabling clang++ compatibility, and for all the other fixes!
I had wanted to venture into such areas myself, too
(e.g. for C++ diagnosis reasons), but simply haven't found the time yet.Quoted 8 lines
Quoted 6 lines
Andreas Mohr
_______________________________________________
PowerTop mailing list
PowerTop(a)lists.01.org
https://lists.01.org/mailman/listinfo/powertopAndreas, feel free to submit a patch with this fix.
Right, that seems like a good idea
(although it's quite a bit of effort,
and all these areas have been committed now unfortunately).I started to dive into it (did git pull of my existing
https://github.com/fenrus75/powertop ), but immediately hit a snag:README said that I should apply the usual UNIX prayer of
./configure
make
make installwhich obviously wasn't possible since in this repo-only content the automake step was not done (likely rightfully, I think, since these things should nicely fit the local environment, but then it should still have been explained in the README).
Running automake then failed (again!! Somehow I knew it, since these things magically have a tendency to fail almost always...):
# ./autogen.sh autoreconf: Entering directory `.' autoreconf: running: autopoint autoreconf: running: aclocal --output=aclocal.m4t aclocal: configure.ac: 20: macro `AM_SILENT_RULES' not found in library aclocal: macro `AM_PROG_MKDIR_P' required but not defined aclocal: macro `AM_PROG_MKDIR_P' required but not defined aclocal: macro `_LT_DECL_SED' required but not defined aclocal: macro `_LT_FUNC_STRIPNAME_CNF' required but not defined autoreconf: aclocal failed with exit status: 1to which https://forum.videolan.org/viewtopic.php?f=13&t=84261
had the following wise words to say: "Use automake 1.11".Fortunately there's an automake1.11 package on Debian, however there's also of course the "standard", "canonical version" "automake" package (oh darnit - which I currently don't even have installed, oops... can you tell that I'm a CMake guy already? ;)). So, since I only had older specific-version automake packages installed (a sufficiently medieval automake1.7),,
I installed the generic, version-progressing one.
But it still used the old version prior to an
update-alternatives --config automake
, at which point it worked.
Quoted 2 lines
So, now that this is documented for other people to be helped,
on to documenting README omissions and working on the scoped array handling commit.
Hi Andreas,
IMHO it would be better to require new enough automake as part of autotools configuration, than add notes to README. Something like this could do:
--->8----
From: Sami Kerola <kerolasa(a)iki.fi>
Date: Sat, 4 Oct 2014 14:54:23 +0100
Subject: [PATCH] configure: require the least automake version 1.11.1
Apparently some Debian has rather old automake, version 1.7, which is causing build from git to fail.
Set the requird automake version to be minimum of 1.11.1, that used to be the version GNU coreutils requied before they introduced AM_TESTS_ENVIRONMENT that works in 1.11.2 or later. As powertop does not have tests, the earlier GNU coreutils requirement an initial pick for this project.
p.s. The automake 1.11.1 has been a round since December 2009, so there really shouldn't be need for support anything older, like 1.7.9 that was released November 2003.
--- configure.ac | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
configure.ac +5 -1
@@ -3,7 +3,11 @@ AC_PREREQ([2.68]) AC_INIT([powertop], [2.6.1], [powertop(a)lists.01.org], [], [https://01.org/powertop]) -AM_INIT_AUTOMAKE([-Wall foreign]) +AM_INIT_AUTOMAKE([ + -Wall + 1.11.2 + foreign +]) AC_LANG([C++]) AC_CONFIG_FILES([ Makefile
Signature · 1 line
2.1.2
Sami Kerola
Re: [Powertop] [PATCH v3 05/15] fix clang++ compilation errors
configure.ac line 10
Quoted 6 lines · Sami Kerola
configure.ac +5
-1-AM_INIT_AUTOMAKE([-Wall foreign]) +AM_INIT_AUTOMAKE([ + -Wall + 1.11.2 + foreign +])
Uh oh... I meant
s/1.11.2/1.11.1/
But then again even the 1.11.2 is not crazy bleeding edge, so it would probably be a fine pick as well.
Signature · 2 lines
Sami Kerola http://www.iki.fi/kerolasa/
Andreas Mohr
Re: [Powertop] [PATCH v3 05/15] fix clang++ compilation errors
In reply to Sami KerolaHi,
Quoted 8 lines · Sami Kerola
Quoted 2 lines · Andreas Mohr
So, now that this is documented for other people to be helped,
on to documenting README omissions and working on the scoped array handling commit.Hi Andreas,
IMHO it would be better to require new enough automake as part of autotools configuration, than add notes to README. Something like this could do:
Not quite, people actually need to get to know that they need automake at all (to achieve availability of ./configure) ;)
(was mentioned shortly further below, but that's not enough)
Quoted 2 lines
Apparently some Debian has rather old automake, version 1.7, which is causing build from git to fail.
That's just my "historic" Debian installation (18 years and counting). (bo, woody, slink, hamm or some such?)
Oh crap, my 'puter just managed to get its driver's license ;) Another 3 years and it will be allowed to drink beer...
Quoted 5 lines
Set the requird automake version to be minimum of 1.11.1, that used to be the version GNU coreutils requied before they introduced
AM_TESTS_ENVIRONMENTthat works in 1.11.2 or later. As powertop does not have tests, the earlier GNU coreutils requirement an initial pick for this project.
Yup, since we *do* seem to use version-specific functionality, we likely *should* fend off version issues,
by demanding specific version requirements
in this AM_INIT_AUTOMAKE autoconf macro,
otherwise our behaviour is "improper", "weak".
Quoted 3 lines
p.s. The automake 1.11.1 has been a round since December 2009, so there really shouldn't be need for support anything older, like 1.7.9 that was released November 2003.
Ouch, that old?
In closing: patch seems fine to me (possibly except for the specific version number, that is).
Thanks,
Andreas Mohr
Sami Kerola
PATCH v3 6/15 remove unnecessary assignments
In reply to Sami KerolaFound using scan-build, Clang static analyzer.
--- src/lib.cpp | 8 ++++---- src/main.cpp | 6 ++++-- src/process/do_process.cpp | 2 +- 3 files changed, 9 insertions(+), 7 deletions(-)
src/lib.cpp +4 -4
@@ -472,10 +472,10 @@ int read_msr(int cpu, uint64_t offset, uint64_t *value) int fd; char msr_path[256]; - fd = sprintf(msr_path, "/dev/cpu/%d/msr", cpu); + sprintf(msr_path, "/dev/cpu/%d/msr", cpu); if (access(msr_path, R_OK) != 0){ - fd = sprintf(msr_path, "/dev/msr%d", cpu); + sprintf(msr_path, "/dev/msr%d", cpu); if (access(msr_path, R_OK) != 0){ fprintf(stderr,
@@ -504,10 +504,10 @@ int write_msr(int cpu, uint64_t offset, uint64_t value) int fd; char msr_path[256]; - fd = sprintf(msr_path, "/dev/cpu/%d/msr", cpu); + sprintf(msr_path, "/dev/cpu/%d/msr", cpu); if (access(msr_path, R_OK) != 0){ - fd = sprintf(msr_path, "/dev/msr%d", cpu); + sprintf(msr_path, "/dev/msr%d", cpu); if (access(msr_path, R_OK) != 0){ fprintf(stderr,
src/main.cpp +4 -2
@@ -315,8 +315,10 @@ static void powertop_init(void) rlmt.rlim_cur = rlmt.rlim_max = get_nr_open(); setrlimit (RLIMIT_NOFILE, &rlmt); - ret = system("/sbin/modprobe cpufreq_stats > /dev/null 2>&1"); - ret = system("/sbin/modprobe msr > /dev/null 2>&1"); + if (system("/sbin/modprobe cpufreq_stats > /dev/null 2>&1")) + fprintf(stderr, _("modprobe cpufreq_stats failed")); + if (system("/sbin/modprobe msr > /dev/null 2>&1")) + fprintf(stderr, _("modprobe msr failed")); statfs("/sys/kernel/debug", &st_fs); if (st_fs.f_type != (long) DEBUGFS_MAGIC) {
src/process/do_process.cpp +1 -1
@@ -579,7 +579,7 @@ void perf_process_bundle::handle_trace_point(void *trace, int cpu, uint64_t time consumer_child_time(cpu, t); } else if (strcmp(event->name, "cpu_idle") == 0) { - ret = pevent_get_field_val(NULL, event, "state", &rec, &val, 0); + pevent_get_field_val(NULL, event, "state", &rec, &val, 0); if (val == (unsigned int)-1) consume_blame(cpu); else
Signature · 1 line
2.1.0
Sami Kerola
PATCH v3 7/15 remove unnecessary code reported by cppcheck
In reply to Sami KerolaReturn values in c_rapl_interface::rapl_measure_energy() are set, but never read. The create_all_alsa_callback() variable is not in use. In cursor_up() if clause had same expression in both true and false cases. In add_runtime_tunables() filename variable was immediately overwrote. The report_show_tunables variable srt_tmp is not in use.
--- src/cpu/rapl/rapl_interface.cpp | 4 ++-- src/devices/alsa.cpp | 1 - src/display.cpp | 9 ++------- src/tuning/runtime.cpp | 4 ---- src/tuning/tuning.cpp | 1 - 5 files changed, 4 insertions(+), 15 deletions(-)
src/cpu/rapl/rapl_interface.cpp +2 -2
@@ -647,9 +647,9 @@ void c_rapl_interface::rapl_measure_energy() double pp0_joules = 0; double pp1_joules = 0; - ret = get_pkg_power_info(&thermal_spec_power, &max_power, &min_power, &max_time_window); + get_pkg_power_info(&thermal_spec_power, &max_power, &min_power, &max_time_window); RAPL_DBG_PRINT("Pkg Power Info: Thermal spec %f watts, max %f watts, min %f watts, max time window %f seconds\n", thermal_spec_power, max_power, min_power, max_time_window); - ret = get_dram_power_info(&thermal_spec_power, &max_power, &min_power, &max_time_window); + get_dram_power_info(&thermal_spec_power, &max_power, &min_power, &max_time_window); RAPL_DBG_PRINT("DRAM Power Info: Thermal spec %f watts, max %f watts, min %f watts, max time window %f seconds\n", thermal_spec_power, max_power, min_power, max_time_window); for (;;) {
src/devices/alsa.cpp +0 -1
@@ -154,7 +154,6 @@ static void create_all_alsa_callback(const char *d_name) { char filename[4096]; class alsa *bl; - ofstream file; if (strncmp(d_name, "hwC", 3) != 0) return;
src/display.cpp +2 -7
@@ -267,13 +267,8 @@ void cursor_up(void) if (w) { w->cursor_up(); if(w->ypad_pos > 0) { - if (tab_names[current_tab] == "Tunables") { - prefresh(w->win, --w->ypad_pos, w->xpad_pos, - 1, 0, LINES - 3, COLS - 1); - } else { - prefresh(w->win, --w->ypad_pos, w->xpad_pos, - 1, 0, LINES - 3, COLS - 1); - } + prefresh(w->win, --w->ypad_pos, w->xpad_pos, + 1, 0, LINES - 3, COLS - 1); } }
src/tuning/runtime.cpp +0 -4
@@ -139,10 +139,6 @@ void add_runtime_tunables(const char *bus) if (entry->d_name[0] == '.') continue; - sprintf(filename, "/sys/bus/%s/devices/%s", bus, entry->d_name); - - - sprintf(filename, "/sys/bus/%s/devices/%s/power/control", bus, entry->d_name); if (access(filename, R_OK) != 0)
src/tuning/tuning.cpp +0 -1
@@ -198,7 +198,6 @@ void report_show_tunables(void) unsigned int i; /* three tables; bad, unfixable, good */ sort_tunables(); - string srt_tmp; int idx, rows = 0, cols; /* First Table */
Signature · 1 line
2.1.0
Sami Kerola
PATCH v3 8/15 add short options to usage, and reorder options in code
In reply to Sami KerolaEarlier user experience was pretty unintuitive. For example -h is often help, and it generated following error message.
powertop: option requires an argument -- 'h'
This change re-assigned short option -h from --html to --help, and made -r to be assigned with --html. All other short vs long option pairs remain untouched.
The option data in struct option, print_usage(), getopt_long() optstring, and getopt_long switch() case, are reorderd be in same order in all four places. All options are in long-option alphabetical order, with exception of --version and --help that are the last in the lists.
Some options where meant to be used as long-only options. These are made unreachable by making the option character to be out side of range what user can type.
Finally if an unknown option is found exit the value is changed from zero to one to indicate an error.
--- src/main.cpp | 162 ++++++++++++++++++++++++++++++----------------------------- 1 file changed, 82 insertions(+), 80 deletions(-)
src/main.cpp +82 -80
@@ -69,22 +69,28 @@ int debug_learning = 0; unsigned time_out = 20; int leave_powertop = 0; +enum { + OPT_AUTO_TUNE = CHAR_MAX + 1, + OPT_EXTECH, + OPT_DEBUG +}; + static const struct option long_options[] = { /* These options set a flag. */ - {"debug", no_argument, &debug_learning, 'd'}, - {"version", no_argument, NULL, 'V'}, - {"help",no_argument, NULL, 'u'}, /* u for usage */ - {"calibrate",no_argument, NULL, 'c'}, - {"auto-tune",no_argument, NULL, 'a'}, - {"html", optional_argument, NULL, 'h'}, - {"csv", optional_argument, NULL, 'C'}, - {"extech", optional_argument, NULL, 'e'}, - {"time", optional_argument, NULL, 't'}, - {"iteration", optional_argument, NULL, 'i'}, - {"workload", optional_argument, NULL, 'w'}, - {"quiet", no_argument, NULL, 'q'}, - {NULL, 0, NULL, 0} + {"auto-tune", no_argument, NULL, OPT_AUTO_TUNE}, + {"calibrate", no_argument, NULL, 'c'}, + {"csv", optional_argument, NULL, 'C'}, + {"debug", no_argument, &debug_learning, OPT_DEBUG}, + {"extech", optional_argument, NULL, OPT_EXTECH}, + {"html", optional_argument, NULL, 'r'}, + {"iteration", optional_argument, NULL, 'i'}, + {"quiet", no_argument, NULL, 'q'}, + {"time", optional_argument, NULL, 't'}, + {"workload", optional_argument, NULL, 'w'}, + {"version", no_argument, NULL, 'V'}, + {"help", no_argument, NULL, 'h'}, + {NULL, 0, NULL, 0} }; static void print_version()
@@ -108,21 +114,21 @@ static bool set_refresh_timeout() static void print_usage() { - printf("%s\n\n",_("Usage: powertop [OPTIONS]")); - printf("--debug \t\t %s\n",_("run in \"debug\" mode")); - printf("--version \t\t %s\n",_("print version information")); - printf("--calibrate \t\t %s\n",_("runs powertop in calibration mode")); - printf("--auto-tune \t\t %s\n",_("Sets all tunable options to their GOOD setting")); - printf("--extech%s \t %s\n",_("[=devnode]"),_("uses an Extech Power Analyzer for measurements")); - printf("--html%s \t %s\n",_("[=FILENAME]"),_("generate a html report")); - printf("--csv%s \t %s\n",_("[=FILENAME]"),_("generate a csv report")); - printf("--time%s \t %s\n",_("[=seconds]"), _("generate a report for 'x' seconds")); - printf("--iteration%s\n", _("[=iterations] number of times to run each test")); - printf("--workload%s \t %s\n", _("[=workload]"), _("file to execute for workload")); - printf("--quiet \t\t %s\n", _("suppress stderr output")); - printf("--help \t\t\t %s\n",_("print this help menu")); + printf("%s\n\n", _("Usage: powertop [OPTIONS]")); + printf(" --auto-tune\t %s\n", _("sets all tunable options to their GOOD setting")); + printf(" -c, --calibrate\t %s\n", _("runs powertop in calibration mode")); + printf(" -C, --csv%s\t %s\n", _("[=filename]"), _("generate a csv report")); + printf(" --debug\t\t %s\n", _("run in \"debug\" mode")); + printf(" --extech%s\t %s\n", _("[=devnode]"), _("uses an Extech Power Analyzer for measurements")); + printf(" -r, --html%s\t %s\n", _("[=filename]"), _("generate a html report")); + printf(" -i, --iteration%s\n", _("[=iterations] number of times to run each test")); + printf(" -q, --quiet\t\t %s\n", _("suppress stderr output")); + printf(" -t, --time%s\t %s\n", _("[=seconds]"), _("generate a report for 'x' seconds")); + printf(" -w, --workload%s %s\n", _("[=workload]"), _("file to execute for workload")); + printf(" -V, --version\t\t %s\n", _("print version information")); + printf(" -h, --help\t\t %s\n", _("print this help menu")); printf("\n"); - printf("%s\n\n",_("For more help please refer to the README")); + printf("%s\n\n", _("For more help please refer to the 'man 8 powertop'")); } static void do_sleep(int seconds)
@@ -380,63 +386,59 @@ int main(int argc, char **argv) #endif while (1) { /* parse commandline options */ - c = getopt_long (argc, argv, "ch:C:i:t:uVw:q", long_options, &option_index); + c = getopt_long(argc, argv, "cC:r:i:qt:w:Vh", long_options, &option_index); /* Detect the end of the options. */ if (c == -1) break; - switch (c) { - case 'V': - print_version(); - exit(0); - break; - - case 'e': /* Extech power analyzer support */ - checkroot(); - extech_power_meter(optarg ? optarg : "/dev/ttyUSB0"); - break; - case 'u': - print_usage(); - exit(0); - break; - case 'a': - auto_tune = 1; - leave_powertop = 1; - break; - case 'c': - powertop_init(); - calibrate(); - break; - - case 'h': /* html report */ - reporttype = REPORT_HTML; - sprintf(filename, "%s", optarg ? optarg : "powertop.html" ); - break; - - case 't': - time_out = (optarg ? atoi(optarg) : 20); - break; - - case 'i': - iterations = (optarg ? atoi(optarg) : 1); - break; - - case 'w': /* measure workload */ - sprintf(workload, "%s", optarg ? optarg :'\0' ); - break; - case 'q': - if(freopen("/dev/null", "a", stderr)) - fprintf(stderr, _("Quite mode failed!\n")); - break; - - case 'C': /* csv report*/ - reporttype = REPORT_CSV; - sprintf(filename, "%s", optarg ? optarg : "powertop.csv"); - break; - case '?': /* Unknown option */ - /* getopt_long already printed an error message. */ - exit(0); - break; + case OPT_AUTO_TUNE: + auto_tune = 1; + leave_powertop = 1; + break; + case 'c': + powertop_init(); + calibrate(); + break; + case 'C': /* csv report */ + reporttype = REPORT_CSV; + sprintf(filename, "%s", optarg ? optarg : "powertop.csv"); + break; + case OPT_DEBUG: + /* implemented using getopt_long(3) flag */ + break; + case OPT_EXTECH: /* Extech power analyzer support */ + checkroot(); + extech_power_meter(optarg ? optarg : "/dev/ttyUSB0"); + break; + case 'r': /* html report */ + reporttype = REPORT_HTML; + sprintf(filename, "%s", optarg ? optarg : "powertop.html"); + break; + case 'i': + iterations = (optarg ? atoi(optarg) : 1); + break; + case 'q': + if (freopen("/dev/null", "a", stderr)) + fprintf(stderr, _("Quite mode failed!\n")); + break; + case 't': + time_out = (optarg ? atoi(optarg) : 20); + break; + case 'w': /* measure workload */ + sprintf(workload, "%s", optarg ? optarg : '\0'); + break; + case 'V': + print_version(); + exit(0); + break; + case 'h': + print_usage(); + exit(0); + break; + case '?': /* Unknown option */ + /* getopt_long already printed an error message. */ + exit(1); + break; } }
Signature · 1 line
2.1.0
Sami Kerola
PATCH v3 9/15 do not use ncurses with --auto-tune
In reply to Sami KerolaThe --auto-tune is not expected to be interactive, so all fiddling with ncurses can and should be skipped. This also makes the --auto-tune more suitable to be used in script(s).
--- src/main.cpp | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
src/main.cpp +6 -3
@@ -460,7 +460,8 @@ int main(int argc, char **argv) end_pci_access(); exit(0); } - init_display(); + if (!auto_tune) + init_display(); initialize_tuning(); /* first one is short to not let the user wait too long */ one_measurement(1, NULL);
@@ -473,11 +474,13 @@ int main(int argc, char **argv) } while (!leave_powertop) { - show_cur_tab(); + if (!auto_tune) + show_cur_tab(); one_measurement(time_out, NULL); learn_parameters(15, 0); } - endwin(); + if (!auto_tune) + endwin(); printf("%s\n", _("Leaving PowerTOP")); end_process_data();
Signature · 1 line
2.1.0
Sami Kerola
PATCH v3 10/15 improve manual groff syntax
In reply to Sami KerolaUse header macro .TH expected way. Use English spacing, that means two spaces after a dot. Use simple font macros, such as .B or .BR, where possible rather than \fB inline selectors. Highlight option arguments consistently, also in description segments. Convert interactive commands to a table. Use mail and web address macros when appropriate.
--- doc/powertop.8 | 141 +++++++++++++++++++++++++++++---------------------------- 1 file changed, 71 insertions(+), 70 deletions(-)
doc/powertop.8 +71 -70
@@ -1,94 +1,95 @@ -.TH POWERTOP 8 "June 1, 2012" "Linux" "powertop manual" +.TH POWERTOP "8" "2014-08-02" "powertop manual" "System Administration" .SH NAME powertop \- a power consumption and power management diagnosis tool. .SH SYNOPSIS .B powertop -.RB [ -.IR options -.RB ] +.RI [ options ] .SH DESCRIPTION -.P -\fBpowertop\fP is a program that helps to diagnose various issues with power consumption -and power management. It also has an interactive mode allowing one to -experiment with various power management settings. When invoking powertop -without arguments powertop starts in interactive mode. +.B powertop +is a program that helps to diagnose various issues with power consumption +and power management. It also has an interactive mode allowing one to +experiment with various power management settings. When invoking +powertop without arguments powertop starts in interactive mode. .SH OPTIONS .TP -\fB\-\-calibrate -runs powertop in calibration mode. When running on battery, powertop -can track power consumption as well as system activity. When there -are enough measurements, powertop can start to report power estimates. One +.B \-\-calibrate +Runs powertop in calibration mode. When running on battery, powertop can +track power consumption as well as system activity. When there are +enough measurements, powertop can start to report power estimates. One can get more accurate estimates by using this option to enable a -calibration cycle. This will cycle through various display levels and USB -device activities and workloads. +calibration cycle. This will cycle through various display levels and +USB device activities and workloads. .TP -\fB\-\-csv[\fR=\fIFILENAME\fR] -generate a CSV report. If a filename is not specified then the -default name "powertop.csv" is used. The CSV report can be -used for reporting and data analysis. +\fB\-\-csv\fR[=\fIfilename\fR] +Generate a CSV report. If a +.I filename +is not specified then the default name +.B powertop.csv +is used. The CSV report can be used for reporting and data analysis. .TP -\fB\-\-debug - run in "debug" mode. +.B \-\-debug +Run in "debug" mode. .TP \fB\-\-extech\fR=\fIdevnode\fR -use the Extech Power Analyzer for measurements. This allows one to +Use the Extech Power Analyzer for measurements. This allows one to specify the serial device node of the serial to USB adaptor connecting to -the Extech Power Analyzer, for example /dev/ttyUSB0. +the Extech Power Analyzer, for example +.IR /dev/ttyUSB0 . .TP -\fB\-\-help - show the help message. +.B \-\-help +Show the help message. .TP -\fB\-\-html[\fR=\fIFILENAME\fR] -generate an HTML report. If a filename is not specified then the -default name "powertop.html" is used. The HTML report can be -sent to others to help diagnose power issues. +\fB\-\-html\fR[=\fIfilename\fR] +Generate an HTML report. If a +.I filename +is not specified then the default name +.B powertop.html +is used. The HTML report can be sent to others to help diagnose power +issues. .TP -\fB\-\-iteration[\fR=\fIiterations\fR] -number of times to run each test. +\fB\-\-iteration\fR[=\fIiterations\fR] +Number of times to run each test. .TP -\fB\-\-quiet - suppress stderr output. +.B \-\-quiet +Suppress stderr output. .TP -\fB\-\-time[\fR=\fIseconds\fR] -generate a report for a specified number of seconds. +\fB\-\-time\fR[=\fIseconds\fR] +Generate a report for a specified number of +.IR seconds . .TP -\fB\-\-version -print version information and exit. +.B \-\-version +Print version information and exit. .SH COMMANDS In interactive mode, the following key bindings are available: -.TP -\fBTab -Show next tab -.TP -\fBBackTab -Show previous tab -.TP -\fBRight Arrow -Scroll to the right -.TP -\fBLeft Arrow -Scroll to the left -.TP -\fBUp Arrow, PageUp -Scroll up or select previous item -.TP -\fBDown Arrow, PageDown -Scroll down or select next item -.TP -\fBSpace, Return -Activate current item -.TP -\fBs -Set refresh timeout -.TP -\fBr -Refresh window -.TP -\fBq, Ctrl-C, Escape -Exit powertop +.IP +.TS +tab(@); +l l. +\fBTab\fR(a)Show next tab +\fBBackTab\fR(a)Show previous tab +\fBRight Arrow\fR(a)Scroll to the right +\fBLeft Arrow\fR(a)Scroll to the left +\fBUp Arrow\fR, \fBPageUp\fR(a)Scroll up or select previous item +\fBDown Arrow\fR, \fBPageDown\fR(a)Scroll down or select next item +\fBSpace\fR, \fBReturn\fR(a)Activate current item +\fBs\fR(a)Set refresh timeout +\fBr\fR(a)Refresh window +\fBq\fR, \fBCtrl-C\fR, \fBEscape\fR(a)Exit powertop +.TE .SH BUGS -Send bug reports to <powertop(a)lists.01.org> +Send bug reports to +.MT powertop(a)lists.01.org +.ME .SH SEE ALSO -The program is more fully described at https://01.org/powertop +The program is more fully described at +.UR https://01.org/powertop +.UE .SH AUTHOR -powertop was written by Arjan van de Ven <arjan(a)linux.intel.com>, and is currently maintained by Chris E Ferron <chris.e.ferron(a)linux.intel.com>. +powertop was written by +.MT arjan@\:linux.\:intel.\:com +Arjan van de Ven +.ME , +and is currently maintained by +.MT chris.\:e.\:ferron@\:linux.\:intel.\:com +Chris E Ferron +.ME .
Signature · 1 line
2.1.0
Sami Kerola
PATCH v3 11/15 fix couple typos
In reply to Sami KerolaFound with misspell-check.
--- src/tuning/nl80211.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
src/tuning/nl80211.h +2 -2
@@ -828,7 +828,7 @@ enum nl80211_commands {* bit. Depending on which antennas are selected in the bitmap, 802.11n * drivers can derive which chainmasks to use (if all antennas belonging to * a particular chain are disabled this chain should be disabled) and if -* a chain has diversity antennas wether diversity should be used or not. +* a chain has diversity antennas whether diversity should be used or not. * HT capabilities (STBC, TX Beamforming, Antenna selection) can be * derived from the available chains after applying the antenna mask. * Non-802.11n drivers can derive wether to use diversity or not.
@@ -855,7 +855,7 @@ enum nl80211_commands {* @__NL80211_ATTR_AFTER_LAST: internal use */ enum nl80211_attrs { -/* don't change the order or add anything inbetween, this is ABI! */ +/* don't change the order or add anything between, this is ABI! */ NL80211_ATTR_UNSPEC ,NL80211_ATTR_WIPHY ,
Signature · 1 line
2.1.0
Sami Kerola
PATCH v3 12/15 wrap lines in README.traceevent
In reply to Sami Kerola--- README.traceevent | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-)
README.traceevent +13 -8
@@ -1,15 +1,20 @@ traceevent: -The traceevent library being built in PowerTOP is really a effort by Steven Rostedt. -The long term intent is for Steven to push the trace event library to distributions, and consume it externally. Right now the PowerTOP project is keeping in sync with his code posted in the Linux kernel git under tools/lib/traceevent. -We will not take patches into the traceevent code directly, rather we will be re-basing -against that code base. +The traceevent library being built in PowerTOP is really a effort by +Steven Rostedt. The long term intent is for Steven to push the trace +event library to distributions, and consume it externally. Right now the +PowerTOP project is keeping in sync with his code posted in the Linux +kernel git under tools/lib/traceevent. We will not take patches into the +traceevent code directly, rather we will be re-basing against that code +base. If you find a bug in the trace event code, you should to one of two things. -1. Send a patch to the PowerTOP mailing list, which will get forwared to Steven if appropriate. -2. Send a patch to the PowerTOP mailing list, cc <Steven Rostedt> rostedt(a)goodmis.org +1. Send a patch to the PowerTOP mailing list, which will get forwared to + Steven if appropriate. +2. Send a patch to the PowerTOP mailing list, and + CC: Steven Rostedt <rostedt(a)goodmis.org> -Please do use the PowerTOP mailing list to discuss topics about traceevent as its used with PowerTOP. - +Please do use the PowerTOP mailing list to discuss topics about +traceevent as its used with PowerTOP.
Signature · 1 line
2.1.0
Sami Kerola
PATCH v3 13/15 clean up .gitignore file
In reply to Sami KerolaKeep the regular expressions, directories, and individual files separate understandable way.
--- .gitignore | 111 +++++++++++++++++++++++++++---------------------------------- 1 file changed, 49 insertions(+), 62 deletions(-)
.gitignore +49 -62
@@ -1,66 +1,53 @@ -*~ -*.o +# regular expressions *.a -*.html *.csv -*.powertop -ChangeLog -Makefile.in -aclocal.m4 -config.guess -config.h.in -config.rpath -config.sub -configure -depcomp -install-sh -ltmain.sh -missing -stamp-h1 -Makefile -config.h -config.log -config.status -libtool -pevent/.deps/ -pevent/Makefile -pevent/Makefile.in -po/Makefile -po/Makevars.template -po/POTFILES -po/Rules-quot -po/boldquot.sed -po/en(a)boldquot.header -po/en(a)quot.header -po/insert-header.sin -po/quot.sed -po/remove-potcdate.sin -po/*.gmo -po/stamp-po -src/powertop -src/css.h -src/Makefile.in -src/.deps/ -src/Makefile -src/calibrate/.deps/ -src/cpu/.deps/ -src/cpu/rapl/.deps -src/devices/.deps/ -src/measurement/.deps/ -src/parameters/.deps/ -src/perf/.deps/ -src/process/.deps/ -src/tuning/.deps/ -src/report/.deps/ -m4 *.dirstamp -*.lo +*.html *.la -autom4te.cache -remove-potcdate.sed -compile -stamp-po -ABOUT-NLS -ar-lib -traceevent/.deps/ -traceevents/.libs/ +*.lo +*.o +*.powertop +*~ +.deps +/po/*.gmo +Makefile +Makefile.in + +# directories +/m4/ + +# individual files +/ABOUT-NLS +/ChangeLog +/aclocal.m4 +/ar-lib +/autom4te.cache +/compile +/config.guess +/config.h +/config.h.in +/config.log +/config.rpath +/config.status +/config.sub +/configure +/depcomp +/install-sh +/libtool +/ltmain.sh +/missing +/po/Makevars.template +/po/POTFILES +/po/Rules-quot +/po/boldquot.sed +/po/en(a)boldquot.header +/po/en(a)quot.header +/po/insert-header.sin +/po/quot.sed +/po/remove-potcdate.sin +/po/stamp-po +/remove-potcdate.sed +/src/css.h +/src/powertop +/stamp-h1 +/stamp-po
Signature · 1 line
2.1.0
Sami Kerola
PATCH v3 14/15 add --auto-tune and --workload to manual page
In reply to Sami KerolaOptions in manual page are now in same order as in usage output, and they include short options when aplicable.
--- doc/powertop.8 | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-)
doc/powertop.8 +19 -11
@@ -12,7 +12,10 @@ experiment with various power management settings. When invoking powertop without arguments powertop starts in interactive mode. .SH OPTIONS .TP -.B \-\-calibrate +.B \-\-auto\-tune +Set all tunable options to their good setting without interaction. +.TP +.BR \-c ", " \-\-calibrate Runs powertop in calibration mode. When running on battery, powertop can track power consumption as well as system activity. When there are enough measurements, powertop can start to report power estimates. One
@@ -20,7 +23,7 @@ can get more accurate estimates by using this option to enable a calibration cycle. This will cycle through various display levels and USB device activities and workloads. .TP -\fB\-\-csv\fR[=\fIfilename\fR] +\fB\-C\fR, \fB\-\-csv\fR[=\fIfilename\fR] Generate a CSV report. If a .I filename is not specified then the default name
@@ -28,7 +31,7 @@ is not specified then the default name is used. The CSV report can be used for reporting and data analysis. .TP .B \-\-debug -Run in "debug" mode. +Run in debug mode. .TP \fB\-\-extech\fR=\fIdevnode\fR Use the Extech Power Analyzer for measurements. This allows one to
@@ -36,10 +39,7 @@ specify the serial device node of the serial to USB adaptor connecting to the Extech Power Analyzer, for example .IR /dev/ttyUSB0 . .TP -.B \-\-help -Show the help message. -.TP -\fB\-\-html\fR[=\fIfilename\fR] +\fB\-r\fR, \fB\-\-html\fR[=\fIfilename\fR] Generate an HTML report. If a .I filename is not specified then the default name
@@ -47,18 +47,26 @@ is not specified then the default name is used. The HTML report can be sent to others to help diagnose power issues. .TP -\fB\-\-iteration\fR[=\fIiterations\fR] +\fB\-i\fR, \fB\-\-iteration\fR[=\fIiterations\fR] Number of times to run each test. .TP -.B \-\-quiet +.BR \-q ", " \-\-quiet Suppress stderr output. .TP -\fB\-\-time\fR[=\fIseconds\fR] +\fB\-t\fR, \fB\-\-time\fR[=\fIseconds\fR] Generate a report for a specified number of .IR seconds . .TP -.B \-\-version +\fB\-w\fR, \fB\-\-workload\fR[=\fIworkload\fR] +Execute +.I workload +file as a part of calibration before making a report. +.TP +.BR \-V ", " \-\-version Print version information and exit. +.TP +.BR \-h ", " \-\-help +Show the help message and exit. .SH COMMANDS In interactive mode, the following key bindings are available: .IP
Signature · 1 line
2.1.0
Sami Kerola
PATCH v3 15/15 allow none-ncurses messaging with ui_notify_user()
In reply to Sami KerolaThe ui_notify_user() is made to be a function pointer, and depending on need it will either send messages using ncurses functions or simply print to console. At the moment the ui_notify_user_console() is not reachable, but that might change in future.
Proposed-by: Sergey Senozhatsky <sergey.senozhatsky(a)gmail.com>
Signed-off-by: Sami Kerola <kerolasa(a)iki.fi>
--- src/lib.cpp | 11 ++++++++++- src/lib.h | 4 +++- src/main.cpp | 4 +++- 3 files changed, 16 insertions(+), 3 deletions(-)
src/lib.cpp +10 -1
@@ -531,7 +531,7 @@ int write_msr(int cpu, uint64_t offset, uint64_t value) #define UI_NOTIFY_BUFF_SZ 2048 -void ui_notify_user(const char *frmt, ...) +void ui_notify_user_ncurses(const char *frmt, ...) { char notify[UI_NOTIFY_BUFF_SZ]; va_list list;
@@ -548,3 +548,12 @@ void ui_notify_user(const char *frmt, ...) mvprintw(1, 0, notify); attroff(COLOR_PAIR(1)); } + +void ui_notify_user_console(const char *frmt, ...) +{ + va_list list; + + va_start(list, frmt); + vprintf(frmt, list); + va_end(list); +}
src/lib.h +3 -1
@@ -83,5 +83,7 @@ extern int write_msr(int cpu, uint64_t offset, uint64_t value);extern void align_string (char *buffer,size_t min_sz,size_t max_sz); -extern void ui_notify_user (const char *frmt, ...); +extern void ui_notify_user_ncurses (const char *frmt, ...); +extern void ui_notify_user_console (const char *frmt, ...); +extern void (*ui_notify_user) (const char *frmt, ...);#endif
src/main.cpp +3 -1
@@ -68,6 +68,7 @@ int debug_learning = 0; unsigned time_out = 20; int leave_powertop = 0; +void (*ui_notify_user) (const char *frmt, ...); enum { OPT_AUTO_TUNE = CHAR_MAX + 1,
@@ -384,7 +385,7 @@ int main(int argc, char **argv) bindtextdomain (PACKAGE, LOCALEDIR); textdomain (PACKAGE); #endif - + ui_notify_user = ui_notify_user_ncurses; while (1) { /* parse commandline options */ c = getopt_long(argc, argv, "cC:r:i:qt:w:Vh", long_options, &option_index); /* Detect the end of the options. */
@@ -394,6 +395,7 @@ int main(int argc, char **argv) case OPT_AUTO_TUNE: auto_tune = 1; leave_powertop = 1; + ui_notify_user = ui_notify_user_console; break; case 'c': powertop_init();
Signature · 1 line
2.1.0
Sami Kerola
Quoted 1 line · Sami Kerola
The following 15 patches are re-submission.
[snip]
Quoted 17 lines
are available in the git repository at:
git://github.com/kerolasa/powertop.gitsamifor you to fetch changes up to
295c86c4f5fa22024792e8e850f303eec7f4b6a3:allow none-ncurses messaging with
ui_notify_user()(2014-09-07 21:52:48 +0100)----------------------------------------------------------------
Sami Kerola (15):
configure: use vertical lists
configure: preferAS_IFmacro rather than shell if statement add src/cpu/rapl/.deps to .gitignore
clean up Makefile.am files
fix clang++ compilation errors
remove unnecessary assignments
remove unnecessary code reported by cppcheck
Quoted 8 lines
add short options to usage, and reorder options in code do not use ncurses with --auto-tune
improve manual groff syntax
fix couple typos
wrap lines in README.traceevent
clean up .gitignore file
add --auto-tune and --workload to manual page allow none-ncurses messaging withui_notify_user()
Good evening,
It's been a while since I sent the patches & pull. Getting either feedback, merge, or reject would be nice.
Signature · 2 lines
Sami Kerola http://www.iki.fi/kerolasa/
Alexandra Yates
Quoted 151 lines
Hello,
The following 15 patches are re-submission. Reply indicators are related to feedback from:
https://lists.01.org/pipermail/powertop/2014-August/001495.html
Quoted 5 lines
0- When creating your patches modify the patch set subject using: git
format-patch --cover-letter --subject-prefix="PATCH Vx"... Where x
is
the next version for your patches. For your next version use v3. This very useful for sorting purposes on my inbox.That makes sense. Done.
Quoted 5 lines
1- Every time you make changes to your patches you would need to send
the entire set of patches with an updated version. This link explains patch best practices that we follow on PowerTOP and across the Linux kernel community:
http://kernelnewbies.org/OPWfirstpatch#head-067c0e555973ae364180b2e3fbe90544e6aa378eAre you sure kernel newbies page is telling to resubmit long patch sets when there is only modest change is some in middle? IMHO resubmitting individual patches that has changed when combined with a git remote repository containing the full patch set is good way to do keep noise level low.
But then again all projects has some habits that I don't understand/agree with which shouldn't really be a problem. I will keep on resubmitting patch sets when requested to do so (and protest a bit by having the git remote available ;-)
Quoted 3 lines
3- It is a good practice to add the names of the people who reviewed
your patches, at the commit paragraph Reviewed_by:[the name of the person].Done.
Quoted 4 lines
Here is my review to the 14 patches you sent on v2 of your code:
P1, P2, P4, P5, P6, P10, P11, P12, P13, and P14:
-Look good.Great.
Quoted 5 lines
P3:
- Change the subject line to something more descriptive. Add a description of why are you making this change, and how it benefits PowerTOP. The subject lines and descriptions are very useful when bisecting the tree for debugging purposes.Done: add src/cpu/rapl/.deps to .gitignore
Quoted 2 lines
P7:
- Please add a description to this patch. (Same reasoning as on P3)See the patch 0007.
Quoted 7 lines
P8:
- I have a problem naming -h --html and -u --help. Please change -h to --help, and use another letter for --html for instance: r as of report would be more fitting. New users will want to do powertop -h and see the help not the html report and get totally lost. It is just matter of reusing the already established usability metaphors.
I did change -h to --help, which is ABI change to undocumented interface, which may or may not better than having unconventional short option assignment. BTW I think it would be good to add this change to release notes, just that no-one can later tell breaking changes happen without noise.
Quoted 2 lines
P9:
- Please abbreviate the subject and add a description to this patch.Done.
Quoted 7 lines
- To make this a feature-complete Sergey's feedback should be
implemented: "...to extendui_notify_user()so it can cover both
cases: initialised ncurses -- callingmvprintw(), and uninitialised ncurses -- printf (to stdout). this will change a bit 'powertop --auto-tune' behaviour, since by default user will now see a 'list' of commands executed by powertop, but it's really easy to silent powertop via stdout redirection".As Sergey mentioned the
mvprintw()avoidance is not needed. But since I figured out how to make both cases, ncurses and console, work without pain a patch 0014 was added to the change set. At the moment one can say usefulness of the change is close to zero, as theui_notify_user()is not reached in case of --auto-tune, but perhaps that changes in future. And then it's nice to have a facility in place that just works.The following changes since commit
cdff23d6e40e31a68286a51e3c94c8a901a74091:powertop: remove temporary file (2014-08-22 09:18:34 -0700)
are available in the git repository at:
git://github.com/kerolasa/powertop.gitsamifor you to fetch changes up to
295c86c4f5fa22024792e8e850f303eec7f4b6a3:allow none-ncurses messaging with
ui_notify_user()(2014-09-07 21:52:48
+0100)----------------------------------------------------------------
Sami Kerola (15):
configure: use vertical lists
configure: preferAS_IFmacro rather than shell if statement add src/cpu/rapl/.deps to .gitignore
clean up Makefile.am files
fix clang++ compilation errors
remove unnecessary assignments
remove unnecessary code reported by cppcheck
add short options to usage, and reorder options in code do not use ncurses with --auto-tune
improve manual groff syntax
fix couple typos
wrap lines in README.traceevent
clean up .gitignore file
add --auto-tune and --workload to manual page allow none-ncurses messaging withui_notify_user().gitignore | 110 ++++++++++------------- Makefile.am | 14 ++- README.traceevent | 21 +++-- configure.ac | 102 ++++++++++++++++----- doc/powertop.8 | 149 ++++++++++++++++--------------- src/Makefile.am | 193 +++++++++++++++++++++++++++++++--------- src/cpu/cpu.cpp | 18 ++-- src/cpu/rapl/rapl_interface.cpp | 4 +- src/devices/ahci.cpp | 3 +- src/devices/alsa.cpp | 1 - src/devices/device.cpp | 6 +- src/devlist.cpp | 3 +- src/display.cpp | 9 +- src/lib.cpp | 19 ++-- src/lib.h | 4 +- src/main.cpp | 181 +++++++++++++++++++------------------ src/process/do_process.cpp | 11 ++- src/report/report.cpp | 3 +- src/tuning/nl80211.h | 4 +- src/tuning/runtime.cpp | 4 - src/tuning/tuning.cpp | 11 +-- 21 files changed, 533 insertions(+), 337 deletions(-)
Quoted 8 lines
--
2.1.0_______________________________________________
PowerTop mailing list
PowerTop(a)lists.01.org
https://lists.01.org/mailman/listinfo/powertop
Hi Sami,
Thank you very much for your patches they made it today to our upstream tree.
Thank you,
Alexandra.