drm/i915: Make HDMI 12bpc actually work
Subsystems (2)
cover drm/i915: Make HDMI 12bpc actually work
From: Ville Syrjälä <[email protected]>
We were missing all kinds of important stuff for HDMI 12bpc support. No idea how it could have worked for anyone when we didn't even send the GCP infoframes. This series fixes things enough to make it work on my IVB machine.
I was too lazy to look at what might be missing for IBX and DDI. If anyone else wants to check those they're welcome to do so. If not, I'll get to them eventually but at the moment I have biger fish to fry.
Ville Syrjälä (3):
drm/i915: Implement WaEnableHDMI8bpcBefore12bpc:snb,ivb drm/i915: Send GCP infoframes for deep color HDMI sinks drm/i915: Enable default_phase in GCP when possible
drivers/gpu/drm/i915/i915_reg.h | 4 + drivers/gpu/drm/i915/intel_hdmi.c | 177 +++++++++++++++++++++++++++++++++++++- 2 files changed, 180 insertions(+), 1 deletion(-)
Signature · 6 lines
2.0.4 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 1/3 drm/i915: Implement WaEnableHDMI8bpcBefore12bpc:snb, ivb
From: Ville Syrjälä <[email protected]>
CPT/PPT require a specific procedure for enabling 12bpc HDMI. Implement it, and to keep things neat pull the code into a function.
--- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_hdmi.c | 55 ++++++++++++++++++++++++++++++++++++++- 2 files changed, 55 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_reg.h +1 -0
@@ -5399,6 +5399,7 @@ enum punit_power_well {#define _TRANSA_CHICKEN1 0xf0060#define _TRANSB_CHICKEN1 0xf1060#define TRANS_CHICKEN1 (pipe) _PIPE(pipe, _TRANSA_CHICKEN1, _TRANSB_CHICKEN1) +#define TRANS_CHICKEN1_HDMI_GC_DISABLE (1<<10)#define TRANS_CHICKEN1_DP0UNIT_GC_DISABLE (1<<4)#define _TRANSA_CHICKEN2 0xf0064#define _TRANSB_CHICKEN2 0xf1064
drivers/gpu/drm/i915/intel_hdmi.c +54 -1
67 lines not on this page · raw message
Signature · 6 lines
2.0.4 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/3 drm/i915: Send GCP infoframes for deep color HDMI sinks
In reply to [email protected]From: Ville Syrjälä <[email protected]>
GCP infoframes are required to inform the HDMI sink about the color depth.
Send the GCP infoframe whenever the sink supports any deep color modes since such sinks must anyway be capable of receiving them. For sinks that don't support deep color let's skip the GCP in case it might confuse the sink, although HDMI 1.4 spec does say all sinks must be capable of reciving them. In theory we could skip the GCP infoframe for deep color sinks in 8bpc mode as well since sinks must fall back to 8bpc whenever GCP isn't received for some time.
BSpec says we should disable GCP after disabling the port, so do that as well.
--- drivers/gpu/drm/i915/i915_reg.h | 3 ++ drivers/gpu/drm/i915/intel_hdmi.c | 74 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 77 insertions(+)
drivers/gpu/drm/i915/i915_reg.h +3 -0
@@ -5260,6 +5260,9 @@ enum punit_power_well {#define _VIDEO_DIP_CTL_A 0xe0200#define _VIDEO_DIP_DATA_A 0xe0208#define _VIDEO_DIP_GCP_A 0xe0210 +#define GCP_COLOR_INDICATION (1 << 2) +#define GCP_DEFAULT_PHASE_ENABLE (1 << 1) +#define GCP_AV_MUTE (1 << 0)#define _VIDEO_DIP_CTL_B 0xe1200#define _VIDEO_DIP_DATA_B 0xe1208
drivers/gpu/drm/i915/intel_hdmi.c +74 -0
110 lines not on this page · raw message
Signature · 6 lines
2.0.4 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 3/3 drm/i915: Enable default_phase in GCP when possible
In reply to [email protected]From: Ville Syrjälä <[email protected]>
When the video timings are suitably aligned so that all different periods start at phase 0 (ie. none of the periods start mid-pixel) we can inform the sink about this. Supposedly the sink can then optimize certain things. Obviously this is only relevant when outputting >8bpc data since otherwise there are no mid-pixel phases.
--- drivers/gpu/drm/i915/intel_hdmi.c | 48 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+)
drivers/gpu/drm/i915/intel_hdmi.c +48 -0
@@ -493,6 +493,49 @@ static bool hdmi_sink_is_deep_color(struct drm_encoder *encoder)return false; } +/* +* Determine if default_phase=1 can be indicated in the GCP infoframe. +* +* From HDMI specification 1.4a: +* - The first pixel of each Video Data Period shall always have a pixel packing phase of 0 +* - The first pixel following each Video Data Period shall have a pixel packing phase of 0 +* - The PP bits shall be constant for all GCPs and will be equal to the last packing phase +* - The first pixel following every transition of HSYNC or VSYNC shall have a pixel packing +* phase of 0 +*/ +static bool gcp_default_phase_possible (int pipe_bpp, +const struct drm_display_mode *mode) +{ +unsigned int pixels_per_group; + +switch (pipe_bpp) { +case 30 : +/* 4 pixels in 5 clocks */ + pixels_per_group =4 ; +break ; +case 36 : +/* 2 pixels in 3 clocks */ + pixels_per_group =2 ; +break ; +case 48 : +/* 1 pixel in 2 clocks */ + pixels_per_group =1 ; +break ; +default : +/* phase information not relevant for 8bpc */ +return false; + } + +return mode->crtc_hdisplay % pixels_per_group ==0 && + mode->crtc_htotal % pixels_per_group ==0 && + mode->crtc_hblank_start % pixels_per_group ==0 && + mode->crtc_hblank_end % pixels_per_group ==0 && + mode->crtc_hsync_start % pixels_per_group ==0 && + mode->crtc_hsync_end % pixels_per_group ==0 && + ((mode->flags &DRM_MODE_FLAG_INTERLACE ) ==0 || + mode->crtc_htotal/2 % pixels_per_group ==0 ); +} +static bool intel_set_gcp_infoframe (struct drm_encoder *encoder) {struct drm_i915_private *dev_priv = encoder->dev->dev_private;
@@ -512,6 +555,11 @@ static bool intel_set_gcp_infoframe(struct drm_encoder *encoder)if (hdmi_sink_is_deep_color (encoder)) val |=GCP_COLOR_INDICATION ; +/* Enable default_phase whenever the display mode is suitably aligned */ +if (gcp_default_phase_possible (crtc->config.pipe_bpp, + &crtc->config.adjusted_mode)) + val |=GCP_DEFAULT_PHASE_ENABLE ; +I915_WRITE (reg, val);return val !=0 ;
Signature · 6 lines
2.0.4 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx