mfd: intel_quark_i2c_gpio: Add Intel Quark X1000 I2C-GPIO MFD Driver
cover mfd: intel_quark_i2c_gpio: Add Intel Quark X1000 I2C-GPIO MFD Driver
From: "Tan, Raymond" <[email protected]>
Hi,
This patch is for enabling support of Intel Quark X1000 I2C controller and GPIO controller. In Quark X1000, the platform exports a single PCI device with both I2C and GPIO functions.
This MFD driver will split the 2 devices for their respective drivers.
Raymond Tan (1):
mfd: intel_quark_i2c_gpio: Add Intel Quark X1000 I2C-GPIO MFD Driver
drivers/mfd/Kconfig | 11 ++ drivers/mfd/Makefile | 1 + drivers/mfd/intel_quark_i2c_gpio.c | 298 ++++++++++++++++++++++++++++++++++++ 3 files changed, 310 insertions(+) create mode 100644 drivers/mfd/intel_quark_i2c_gpio.c
Signature · 1 line
1.7.9.5
PATCH 1/1 mfd: intel_quark_i2c_gpio: Add Intel Quark X1000 I2C-GPIO MFD Driver
In Quark X1000, there's a single PCI device that provides both an I2C controller and a GPIO controller. This MFD driver will split the 2 devices for their respective drivers.
This patch is based on Josef Ahmad's initial work for Quark enabling.
--- drivers/mfd/Kconfig | 11 ++ drivers/mfd/Makefile | 1 + drivers/mfd/intel_quark_i2c_gpio.c | 298 ++++++++++++++++++++++++++++++++++++ 3 files changed, 310 insertions(+) create mode 100644 drivers/mfd/intel_quark_i2c_gpio.c
drivers/mfd/Kconfig +11 -0
@@ -219,6 +219,17 @@ config HTC_I2CPLD This device provides input and output GPIOs through an I2C interface to one or more sub-chips. +config MFD_INTEL_QUARK_I2C_GPIO + tristate "Intel Quark MFD I2C GPIO" + depends on PCI && X86 + depends on COMMON_CLK + select MFD_CORE + help + This MFD provides support for I2C and GPIO that exist only + in a single PCI device. It splits the 2 IO devices to + their respective IO driver. + The GPIO exports a total amount of 8 interrupt-capable GPIOs. + config LPC_ICH tristate "Intel ICH LPC" depends on PCI
drivers/mfd/Makefile +1 -0
@@ -133,6 +133,7 @@ obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o obj-$(CONFIG_PMIC_ADP5520) += adp5520.o obj-$(CONFIG_MFD_KEMPLD) += kempld-core.o +obj-$(CONFIG_MFD_INTEL_QUARK_I2C_GPIO) += intel_quark_i2c_gpio.o obj-$(CONFIG_LPC_SCH) += lpc_sch.o obj-$(CONFIG_LPC_ICH) += lpc_ich.o obj-$(CONFIG_MFD_RDC321X) += rdc321x-southbridge.o
drivers/mfd/intel_quark_i2c_gpio.c new file +298 -0
298 lines not on this page · raw message
Signature · 1 line
1.7.9.5
Quoted 5 lines · Raymond Tan
In Quark X1000, there's a single PCI device that provides both an I2C controller and a GPIO controller. This MFD driver will split the 2 devices for their respective drivers.
This patch is based on Josef Ahmad's initial work for Quark enabling.
Few comments below.
After addressing take my
Quoted 109 lines
Signed-off-by Weike Chen <[email protected]>Signed-off-by Raymond Tan <[email protected]>--- drivers/mfd/Kconfig | 11 ++ drivers/mfd/Makefile | 1 + drivers/mfd/intel_quark_i2c_gpio.c | 298 ++++++++++++++++++++++++++++++++++++ 3 files changed, 310 insertions(+) create mode 100644 drivers/mfd/intel_quark_i2c_gpio.cdrivers/mfd/Kconfig +11
-0@@ -219,6 +219,17 @@ config HTC_I2CPLD This device provides input and output GPIOs through an I2C interface to one or more sub-chips. +config MFD_INTEL_QUARK_I2C_GPIO + tristate "Intel Quark MFD I2C GPIO" + depends on PCI && X86 + depends on COMMON_CLK + select MFD_CORE + help + This MFD provides support for I2C and GPIO that exist only + in a single PCI device. It splits the 2 IO devices to + their respective IO driver. + The GPIO exports a total amount of 8 interrupt-capable GPIOs. + config LPC_ICH tristate "Intel ICH LPC" depends on PCIdrivers/mfd/Makefile +1
-0@@ -133,6 +133,7 @@ obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o obj-$(CONFIG_PMIC_ADP5520) += adp5520.o obj-$(CONFIG_MFD_KEMPLD) += kempld-core.o +obj-$(CONFIG_MFD_INTEL_QUARK_I2C_GPIO) += intel_quark_i2c_gpio.o obj-$(CONFIG_LPC_SCH) += lpc_sch.o obj-$(CONFIG_LPC_ICH) += lpc_ich.o obj-$(CONFIG_MFD_RDC321X) += rdc321x-southbridge.odrivers/mfd/intel_quark_i2c_gpio.c new file +59
-0@@ -0,0 +1,298 @@ +/* +* Intel Quark MFD PCI driver for I2C & GPIO +* +* Copyright(c) 2014 Intel Corporation. +* +* This program is free software; you can redistribute it and/or modify it +* under the terms and conditions of the GNU General Public License, +* version 2, as published by the Free Software Foundation. +* +* This program is distributed in the hope it will be useful, but WITHOUT +* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +* more details. +* +* Intel Quark PCI device for I2C and GPIO controller sharing the same +* PCI function. This PCI driver will split the 2 devices into their +* respective drivers. +*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/mfd/core.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/dmi.h> +#include <linux/platform_data/gpio-dwapb.h> +#include <linux/platform_data/i2c-designware.h> + +/* PCI BAR for register base address */ +#define MFD_I2C_BAR 0 +#define MFD_GPIO_BAR 1 + +/* The base GPIO number under GPIOLIB framework */ +#define INTEL_QUARK_MFD_GPIO_BASE 8 + +/* The default number of South-Cluster GPIO on Quark. */ +#define INTEL_QUARK_MFD_NGPIO 8 + +/* The DesignWare GPIO ports on Quark. */ +#define INTEL_QUARK_GPIO_NPORTS 1 + +#define INTEL_QUARK_IORES_MEM 0 +#define INTEL_QUARK_IORES_IRQ 1 + +#define INTEL_QUARK_I2C_CONTROLLER_CLK "i2c_designware.0" + +/* The Quark I2C controller source clock */ +#define INTEL_QUARK_I2C_CLK_HZ 33000000 + +#define INTEL_QUARK_I2C_NCLK 1 + +struct clk *intel_quark_i2c_clk; +struct clk_lookup *intel_quark_i2c_clk_lookups; + +struct i2c_mode_info { +const char *name; +unsigned int i2c_scl_freq; +};
drivers/mfd/intel_quark_i2c_gpio.c line 69
Quoted 10 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +10
-0+ +static const struct i2c_mode_info platform_i2c_mode_info[] = { + { + .name ="Galileo" , + .i2c_scl_freq =100000 , + }, + { + .name ="GalileoGen2" , + .i2c_scl_freq =400000 , + },
You can decrease indentation level if you want to by using
= {{
}, {
}};
Though I don't know if Lee likes it :-)
At least you may use }, { at one line I think.
Quoted 22 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +22
-0+}; + +static struct resource intel_quark_i2c_res[] = { + [INTEL_QUARK_IORES_MEM ] = { + .flags =IORESOURCE_MEM , + }, + [INTEL_QUARK_IORES_IRQ ] = { + .flags =IORESOURCE_IRQ , + }, +}; + +static struct resource intel_quark_gpio_res[] = { + [INTEL_QUARK_IORES_MEM ] = { + .flags =IORESOURCE_MEM , + }, +}; + +static struct mfd_cell intel_quark_mfd_cells[] = { + { + .id =MFD_I2C_BAR , + .name ="i2c_designware" , + .num_resources =ARRAY_SIZE (intel_quark_i2c_res),
drivers/mfd/intel_quark_i2c_gpio.c line 101
Quoted 10 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +10
-0+ .resources = intel_quark_i2c_res, + .ignore_resource_conflicts = true, + }, + { + .id = MFD_GPIO_BAR, + .name = "gpio-dwapb", + .num_resources = ARRAY_SIZE(intel_quark_gpio_res), + .resources = intel_quark_gpio_res, + .ignore_resource_conflicts = true, + },
Ditto.
Quoted 62 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +62
-0+}; + +static const struct pci_device_id intel_quark_mfd_ids[] = { + {PCI_VDEVICE (INTEL ,0x0934 ), }, + {0 ,} +}; +MODULE_DEVICE_TABLE (pci, intel_quark_mfd_ids); + +static struct dwapb_platform_data * +intel_quark_prepare_pdata (struct pci_dev *pdev) +{ +struct dwapb_platform_data *pdata; +struct device *dev = &pdev->dev; + + pdata =devm_kzalloc (dev,sizeof (*pdata),GFP_KERNEL ); +if (!pdata) +return ERR_PTR (-ENOMEM ); + +/* For intel quark x1000, it has only one port: portA */ + pdata->nports =INTEL_QUARK_GPIO_NPORTS ; + pdata->properties =devm_kcalloc (dev, pdata->nports, +sizeof (*pdata->properties), +GFP_KERNEL ); +if (!pdata->properties) +return ERR_PTR (-ENOMEM ); + +/* Set the properties for portA */ + pdata->properties->node =NULL ; + pdata->properties->name ="intel-quark-x1000-gpio-portA" ; + pdata->properties->idx =0 ; + pdata->properties->ngpio =INTEL_QUARK_MFD_NGPIO ; + pdata->properties->gpio_base =INTEL_QUARK_MFD_GPIO_BASE ; + pdata->properties->irq = pdev->irq; + pdata->properties->irq_shared = true; + +return pdata; +} + +static struct dw_i2c_platform_data * +intel_quark_get_i2c_mode (struct pci_dev *pdev) +{ +const char *board_name =dmi_get_system_info (DMI_BOARD_NAME ); +struct dw_i2c_platform_data *pdata; +struct device *dev = &pdev->dev; +unsigned int i; + + pdata =devm_kzalloc (dev,sizeof (*pdata),GFP_KERNEL ); +if (!pdata) +return ERR_PTR (-ENOMEM ); + +/* Fast mode by default */ + pdata->i2c_scl_freq =400000 ; + +for (i =0 ; i <ARRAY_SIZE (platform_i2c_mode_info); i++) +if (!strcmp (board_name, platform_i2c_mode_info[i].name)) + pdata->i2c_scl_freq + = platform_i2c_mode_info[i].i2c_scl_freq; + +return pdata; +} + +static int intel_quark_register_i2c_clk (struct pci_dev *pdev)
drivers/mfd/intel_quark_i2c_gpio.c line 173
Quoted 10 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +10
-0+{ + intel_quark_i2c_clk =clk_register_fixed_rate ( + &pdev->dev,INTEL_QUARK_I2C_CONTROLLER_CLK ,NULL , +CLK_IS_ROOT ,INTEL_QUARK_I2C_CLK_HZ ); + + intel_quark_i2c_clk_lookups =devm_kcalloc ( + &pdev->dev,INTEL_QUARK_I2C_NCLK , +sizeof (*intel_quark_i2c_clk_lookups),GFP_KERNEL ); + +if (!intel_quark_i2c_clk_lookups)
Potential leak here since you didn't call clk_unregister(). Maybe you move the memory allocation upper?
Quoted 125 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +125
-0+return -ENOMEM ; + + intel_quark_i2c_clk_lookups[0 ].dev_id =INTEL_QUARK_I2C_CONTROLLER_CLK ; + +return clk_register_clkdevs (intel_quark_i2c_clk, + intel_quark_i2c_clk_lookups,INTEL_QUARK_I2C_NCLK ); +} + +static void intel_quark_unregister_i2c_clk (void ) +{ +if (!intel_quark_i2c_clk || !intel_quark_i2c_clk_lookups) +return ; + +clkdev_drop (intel_quark_i2c_clk_lookups); +clk_unregister (intel_quark_i2c_clk); +} + +static int intel_quark_i2c_setup (struct pci_dev *pdev,struct mfd_cell *cell) +{ +struct dw_i2c_platform_data *pdata; +struct resource *res = (struct resource *)cell->resources; +int retval; + + res[INTEL_QUARK_IORES_MEM ].start = +pci_resource_start (pdev,MFD_I2C_BAR ); + res[INTEL_QUARK_IORES_MEM ].end = +pci_resource_end (pdev,MFD_I2C_BAR ); + + res[INTEL_QUARK_IORES_IRQ ].start = pdev->irq; + res[INTEL_QUARK_IORES_IRQ ].end = pdev->irq; + + retval =intel_quark_register_i2c_clk (pdev); +if (retval) { +dev_err (&pdev->dev,"Fixed clk register failed: %d\n" , retval); +return retval; + } + + pdata =intel_quark_get_i2c_mode (pdev); +if (IS_ERR (pdata)) +return PTR_ERR (pdata); + + cell->platform_data = pdata; + cell->pdata_size =sizeof (*pdata); + +return 0 ; +} + +static int intel_quark_gpio_setup (struct pci_dev *pdev,struct mfd_cell *cell) +{ +struct dwapb_platform_data *pdata; +struct resource *res = (struct resource *)cell->resources; + + res[INTEL_QUARK_IORES_MEM ].start = +pci_resource_start (pdev,MFD_GPIO_BAR ); + res[INTEL_QUARK_IORES_MEM ].end = +pci_resource_end (pdev,MFD_GPIO_BAR ); + + pdata =intel_quark_prepare_pdata (pdev); +if (IS_ERR (pdata)) +return PTR_ERR (pdata); + + cell->platform_data = pdata; + cell->pdata_size =sizeof (*pdata); + +return 0 ; +} + +struct intel_quark_mfd_dev { +int (*setup)(struct pci_dev *pdev,struct mfd_cell *cell); +struct mfd_cell *cell; +}; + +static struct intel_quark_mfd_dev intel_quark_mfd_devs[] = { + { + .cell = &intel_quark_mfd_cells[MFD_I2C_BAR ], + .setup = intel_quark_i2c_setup, + }, + { + .cell = &intel_quark_mfd_cells[MFD_GPIO_BAR ], + .setup = intel_quark_gpio_setup, + }, + { +/* terminator */ + }, +}; + +static int intel_quark_mfd_probe (struct pci_dev *pdev, +const struct pci_device_id *id) +{ +struct intel_quark_mfd_dev *mfd_dev; +int retval; + + retval =pcim_enable_device (pdev); +if (retval) +return retval; + +for (mfd_dev = intel_quark_mfd_devs; mfd_dev->cell; mfd_dev++) +if (mfd_dev->setup) { + retval = mfd_dev->setup (pdev, mfd_dev->cell); +if (retval) +return retval; + } + +return mfd_add_devices (&pdev->dev,0 , intel_quark_mfd_cells, +ARRAY_SIZE (intel_quark_mfd_cells),NULL ,0 ,NULL ); +} + +static void intel_quark_mfd_remove (struct pci_dev *pdev) +{ +intel_quark_unregister_i2c_clk (); +mfd_remove_devices (&pdev->dev); +} + +static struct pci_driver intel_quark_mfd_driver = { + .name ="intel_quark_mfd_i2c_gpio" , + .id_table = intel_quark_mfd_ids, + .probe = intel_quark_mfd_probe, + .remove = intel_quark_mfd_remove, +}; + +module_pci_driver (intel_quark_mfd_driver); + +MODULE_AUTHOR ("Raymond Tan <[email protected]>" ); +MODULE_DESCRIPTION ("Intel Quark MFD PCI driver for I2C & GPIO" ); +MODULE_LICENSE ("GPL v2" );
Signature · 2 lines
Andy Shevchenko <[email protected]> Intel Finland Oy
Quoted 11 lines · Andy Shevchenko
Quoted 5 lines · Raymond Tan
In Quark X1000, there's a single PCI device that provides both an I2C controller and a GPIO controller. This MFD driver will split the 2 devices for their respective drivers.
This patch is based on Josef Ahmad's initial work for Quark enabling.
Few comments below.
After addressing take my
Reviewed-by Andy Shevchenko <[email protected]>
[...]
Quoted 12 lines
drivers/mfd/intel_quark_i2c_gpio.c line 69
Quoted 9 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +9
-0+static const struct i2c_mode_info platform_i2c_mode_info[] = { + { + .name ="Galileo" , + .i2c_scl_freq =100000 , + }, + { + .name ="GalileoGen2" , + .i2c_scl_freq =400000 , + },You can decrease indentation level if you want to by using
Quoted 5 lines
= {{
}, {
}};Though I don't know if Lee likes it :-)
No, please don't do that.
[...]
Signature · 4 lines
Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
Hi Andy,
Thanks for your review. I've made the changes and will resend the patch v2.
Warm Regards,
Raymond Tan
Software Engineer
Malaysia IT Flex Services
INET: 8-253-0075
Flex Website: http://flexservices.intel.com
Quoted 390 lines
-----Original Message-----
From: Andy Shevchenko [mailto:[email protected]]
Sent: Monday, November 03, 2014 5:12 PM
To: Tan, Raymond
Cc: Lee Jones; Samuel Ortiz; [email protected]; Chen, Alvin
Subject: Re: [PATCH 1/1] mfd:intel_quark_i2c_gpio: Add Intel Quark X1000 I2C-GPIO MFD DriverQuoted 5 lines · Raymond Tan
In Quark X1000, there's a single PCI device that provides both an I2C controller and a GPIO controller. This MFD driver will split the 2 devices for their respective drivers.
This patch is based on Josef Ahmad's initial work for Quark enabling.
Few comments below.
After addressing take my
Reviewed-by Andy Shevchenko <[email protected]>drivers/mfd/Makefile obj-$(CONFIG_AB8500_CORE) += ab8500-
Quoted 38 lines
Signed-off-by Weike Chen <[email protected]>Signed-off-by Raymond Tan <[email protected]>--- drivers/mfd/Kconfig | 11 ++ drivers/mfd/Makefile | 1 + drivers/mfd/intel_quark_i2c_gpio.c | 298 ++++++++++++++++++++++++++++++++++++ 3 files changed, 310 insertions(+) create mode 100644 drivers/mfd/intel_quark_i2c_gpio.cdrivers/mfd/Kconfig index renamed from drivers/mfd/Kconfig +0
-0b7c74a7..d01d042 100644
drivers/mfd/Kconfig +11
-0@@ -219,6 +219,17 @@ config HTC_I2CPLD This device provides input and output GPIOs through an I2C interface to one or more sub-chips. +config MFD_INTEL_QUARK_I2C_GPIO + tristate "Intel Quark MFD I2C GPIO" + depends on PCI && X86 + depends on COMMON_CLK + select MFD_CORE + help + This MFD provides support for I2C and GPIO that exist only + in a single PCI device. It splits the 2 IO devices to + their respective IO driver. + The GPIO exports a total amount of 8 interrupt-capable GPIOs. + config LPC_ICH tristate "Intel ICH LPC" depends on PCIdrivers/mfd/Makefile index renamed from drivers/mfd/Makefile +0
-08a28dc9..d42652d 100644
drivers/mfd/Makefile +0
-0@@ -133,6 +133,7 @@ obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o
drivers/mfd/Makefile obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o
Quoted 4 lines
drivers/mfd/Makefile +1
-0obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o obj-$(CONFIG_PMIC_ADP5520) += adp5520.o obj-$(CONFIG_MFD_KEMPLD) += kempld-core.o +obj-$(CONFIG_MFD_INTEL_QUARK_I2C_GPIO) +=intel_quark_i2c_gpio.o
Quoted 13 lines
drivers/mfd/Makefile +0
-0obj-$(CONFIG_LPC_SCH) += lpc_sch.o obj-$(CONFIG_LPC_ICH) += lpc_ich.o obj-$(CONFIG_MFD_RDC321X) += rdc321x-southbridge.odrivers/mfd/intel_quark_i2c_gpio.c new file +3
-0@@ -0,0 +1,298 @@ +/* +* Intel Quark MFD PCI driver for I2C & GPIO +* drivers/mfd/intel_quark_i2c_gpio.c line 13
Quoted 10 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +10
-0+* Copyright(c) 2014 Intel Corporation. +* +* This program is free software; you can redistribute it and/or +modify it +* under the terms and conditions of the GNU General Public License, +* version 2, as published by the Free Software Foundation. +* +* This program is distributed in the hope it will be useful, but +WITHOUT +* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
Quoted 51 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +51
-0+or +* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public +License for +* more details. +* +* Intel Quark PCI device for I2C and GPIO controller sharing the +same +* PCI function. This PCI driver will split the 2 devices into their +* respective drivers. +*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/mfd/core.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/dmi.h> +#include <linux/platform_data/gpio-dwapb.h> +#include <linux/platform_data/i2c-designware.h> + +/* PCI BAR for register base address */ +#define MFD_I2C_BAR 0 +#define MFD_GPIO_BAR 1 + +/* The base GPIO number under GPIOLIB framework */ +#define INTEL_QUARK_MFD_GPIO_BASE 8 + +/* The default number of South-Cluster GPIO on Quark. */ +#define INTEL_QUARK_MFD_NGPIO 8 + +/* The DesignWare GPIO ports on Quark. */ +#define INTEL_QUARK_GPIO_NPORTS 1 + +#define INTEL_QUARK_IORES_MEM 0 +#define INTEL_QUARK_IORES_IRQ 1 + +#define INTEL_QUARK_I2C_CONTROLLER_CLK "i2c_designware.0" + +/* The Quark I2C controller source clock */ +#define INTEL_QUARK_I2C_CLK_HZ 33000000 + +#define INTEL_QUARK_I2C_NCLK 1 + +struct clk *intel_quark_i2c_clk; +struct clk_lookup *intel_quark_i2c_clk_lookups; + +struct i2c_mode_info { +const char *name; +unsigned int i2c_scl_freq; +};drivers/mfd/intel_quark_i2c_gpio.c line 69
Quoted 10 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +10
-0+ +static const struct i2c_mode_info platform_i2c_mode_info[] = { + { + .name ="Galileo" , + .i2c_scl_freq =100000 , + }, + { + .name ="GalileoGen2" , + .i2c_scl_freq =400000 , + },You can decrease indentation level if you want to by using
= {{
}, {
}};Though I don't know if Lee likes it :-)
At least you may use }, { at one line I think.
Quoted 22 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +22
-0+}; + +static struct resource intel_quark_i2c_res[] = { + [INTEL_QUARK_IORES_MEM ] = { + .flags =IORESOURCE_MEM , + }, + [INTEL_QUARK_IORES_IRQ ] = { + .flags =IORESOURCE_IRQ , + }, +}; + +static struct resource intel_quark_gpio_res[] = { + [INTEL_QUARK_IORES_MEM ] = { + .flags =IORESOURCE_MEM , + }, +}; + +static struct mfd_cell intel_quark_mfd_cells[] = { + { + .id =MFD_I2C_BAR , + .name ="i2c_designware" , + .num_resources =ARRAY_SIZE (intel_quark_i2c_res),drivers/mfd/intel_quark_i2c_gpio.c line 101
Quoted 10 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +10
-0+ .resources = intel_quark_i2c_res, + .ignore_resource_conflicts = true, + }, + { + .id = MFD_GPIO_BAR, + .name = "gpio-dwapb", + .num_resources = ARRAY_SIZE(intel_quark_gpio_res), + .resources = intel_quark_gpio_res, + .ignore_resource_conflicts = true, + },Ditto.
Quoted 30 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +30
-0+}; + +static const struct pci_device_id intel_quark_mfd_ids[] = { + {PCI_VDEVICE (INTEL ,0x0934 ), }, + {0 ,} +}; +MODULE_DEVICE_TABLE (pci, intel_quark_mfd_ids); + +static struct dwapb_platform_data * +intel_quark_prepare_pdata (struct pci_dev *pdev) { +struct dwapb_platform_data *pdata; +struct device *dev = &pdev->dev; + + pdata =devm_kzalloc (dev,sizeof (*pdata),GFP_KERNEL ); +if (!pdata) +return ERR_PTR (-ENOMEM ); + +/* For intel quark x1000, it has only one port: portA */ + pdata->nports =INTEL_QUARK_GPIO_NPORTS ; + pdata->properties =devm_kcalloc (dev, pdata->nports, +sizeof (*pdata->properties), +GFP_KERNEL ); +if (!pdata->properties) +return ERR_PTR (-ENOMEM ); + +/* Set the properties for portA */ + pdata->properties->node =NULL ; + pdata->properties->name ="intel-quark-x1000-gpio-portA" ; + pdata->properties->idx =0 ; + pdata->properties->ngpio =INTEL_QUARK_MFD_NGPIO ;drivers/mfd/intel_quark_i2c_gpio.c
Quoted 10 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +10
-0+ pdata->properties->gpio_base =INTEL_QUARK_MFD_GPIO_BASE ; + pdata->properties->irq = pdev->irq; + pdata->properties->irq_shared = true; + +return pdata; +} + +static struct dw_i2c_platform_data * +intel_quark_get_i2c_mode (struct pci_dev *pdev) { + const char *board_name =
dmi_get_system_info(DMI_BOARD_NAME);Quoted 19 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +19
-0+struct dw_i2c_platform_data *pdata; +struct device *dev = &pdev->dev; +unsigned int i; + + pdata =devm_kzalloc (dev,sizeof (*pdata),GFP_KERNEL ); +if (!pdata) +return ERR_PTR (-ENOMEM ); + +/* Fast mode by default */ + pdata->i2c_scl_freq =400000 ; + +for (i =0 ; i <ARRAY_SIZE (platform_i2c_mode_info); i++) +if (!strcmp (board_name, platform_i2c_mode_info[i].name)) + pdata->i2c_scl_freq + = platform_i2c_mode_info[i].i2c_scl_freq; + +return pdata; +} +drivers/mfd/intel_quark_i2c_gpio.c line 173
Quoted 10 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +10
-0+static int intel_quark_register_i2c_clk (struct pci_dev *pdev) { + intel_quark_i2c_clk =clk_register_fixed_rate ( + &pdev->dev,INTEL_QUARK_I2C_CONTROLLER_CLK ,NULL , +CLK_IS_ROOT ,INTEL_QUARK_I2C_CLK_HZ ); + + intel_quark_i2c_clk_lookups =devm_kcalloc ( + &pdev->dev,INTEL_QUARK_I2C_NCLK , +sizeof (*intel_quark_i2c_clk_lookups),GFP_KERNEL ); + +if (!intel_quark_i2c_clk_lookups)Potential leak here since you didn't call
clk_unregister(). Maybe you move the memory allocation upper?Quoted 24 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +24
-0+return -ENOMEM ; + + intel_quark_i2c_clk_lookups[0 ].dev_id = +INTEL_QUARK_I2C_CONTROLLER_CLK ; + +return clk_register_clkdevs (intel_quark_i2c_clk, + intel_quark_i2c_clk_lookups,INTEL_QUARK_I2C_NCLK ); } + +static void intel_quark_unregister_i2c_clk (void ) +{ +if (!intel_quark_i2c_clk || !intel_quark_i2c_clk_lookups) +return ; + +clkdev_drop (intel_quark_i2c_clk_lookups); +clk_unregister (intel_quark_i2c_clk); +} + +static int intel_quark_i2c_setup (struct pci_dev *pdev,struct +mfd_cell *cell) { +struct dw_i2c_platform_data *pdata; +struct resource *res = (struct resource *)cell->resources; +int retval; + + res[INTEL_QUARK_IORES_MEM].start =drivers/mfd/intel_quark_i2c_gpio.c
Quoted 10 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +10
-0+pci_resource_start (pdev,MFD_I2C_BAR ); + res[INTEL_QUARK_IORES_MEM ].end = +pci_resource_end (pdev,MFD_I2C_BAR ); + + res[INTEL_QUARK_IORES_IRQ ].start = pdev->irq; + res[INTEL_QUARK_IORES_IRQ ].end = pdev->irq; + + retval =intel_quark_register_i2c_clk (pdev); +if (retval) { + dev_err(&pdev->dev, "Fixed clk register failed: %d\n",retval);
Quoted 86 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +86
-0+return retval; + } + + pdata =intel_quark_get_i2c_mode (pdev); +if (IS_ERR (pdata)) +return PTR_ERR (pdata); + + cell->platform_data = pdata; + cell->pdata_size =sizeof (*pdata); + +return 0 ; +} + +static int intel_quark_gpio_setup (struct pci_dev *pdev,struct +mfd_cell *cell) { +struct dwapb_platform_data *pdata; +struct resource *res = (struct resource *)cell->resources; + + res[INTEL_QUARK_IORES_MEM ].start = +pci_resource_start (pdev,MFD_GPIO_BAR ); + res[INTEL_QUARK_IORES_MEM ].end = +pci_resource_end (pdev,MFD_GPIO_BAR ); + + pdata =intel_quark_prepare_pdata (pdev); +if (IS_ERR (pdata)) +return PTR_ERR (pdata); + + cell->platform_data = pdata; + cell->pdata_size =sizeof (*pdata); + +return 0 ; +} + +struct intel_quark_mfd_dev { +int (*setup)(struct pci_dev *pdev,struct mfd_cell *cell); +struct mfd_cell *cell; +}; + +static struct intel_quark_mfd_dev intel_quark_mfd_devs[] = { + { + .cell = &intel_quark_mfd_cells[MFD_I2C_BAR ], + .setup = intel_quark_i2c_setup, + }, + { + .cell = &intel_quark_mfd_cells[MFD_GPIO_BAR ], + .setup = intel_quark_gpio_setup, + }, + { +/* terminator */ + }, +}; + +static int intel_quark_mfd_probe (struct pci_dev *pdev, +const struct pci_device_id *id) +{ +struct intel_quark_mfd_dev *mfd_dev; +int retval; + + retval =pcim_enable_device (pdev); +if (retval) +return retval; + +for (mfd_dev = intel_quark_mfd_devs; mfd_dev->cell; mfd_dev++) +if (mfd_dev->setup) { + retval = mfd_dev->setup (pdev, mfd_dev->cell); +if (retval) +return retval; + } + +return mfd_add_devices (&pdev->dev,0 , intel_quark_mfd_cells, +ARRAY_SIZE (intel_quark_mfd_cells),NULL ,0 ,NULL ); } + +static void intel_quark_mfd_remove (struct pci_dev *pdev) { +intel_quark_unregister_i2c_clk (); +mfd_remove_devices (&pdev->dev); +} + +static struct pci_driver intel_quark_mfd_driver = { + .name ="intel_quark_mfd_i2c_gpio" , + .id_table = intel_quark_mfd_ids, + .probe = intel_quark_mfd_probe, + .remove = intel_quark_mfd_remove, +}; + +module_pci_driver (intel_quark_mfd_driver); +
Quoted 8 lines
drivers/mfd/intel_quark_i2c_gpio.c line 298
Quoted 3 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +3
-0+MODULE_AUTHOR ("Raymond Tan <[email protected]>" ); +MODULE_DESCRIPTION ("Intel Quark MFD PCI driver for I2C & GPIO" ); +MODULE_LICENSE ("GPL v2" );--
Andy Shevchenko <[email protected]> Intel Finland Oy
���{.n�+�������+%�����ݶ��w��{.n�+����{��G�����{ay�ʇڙ�,j��f���h��������z_�(�階�ݢj"���m������G������?����&���~��iO��z��v�^�m����������?�I�
Quoted 5 lines · Raymond Tan
In Quark X1000, there's a single PCI device that provides both an I2C controller and a GPIO controller. This MFD driver will split the 2 devices for their respective drivers.
This patch is based on Josef Ahmad's initial work for Quark enabling.
Hi Raymond.
I see support for interrupts on GPIO input has been dropped. In fact it doesn't appear you have any IRQ support here at all.
Could you detail the reasons why ?
Bryan
Quoted 5 lines · Bryan O'Donoghue
Quoted 4 lines · Raymond Tan
In Quark X1000, there's a single PCI device that provides both an I2C controller and a GPIO controller. This MFD driver will split the 2 devices for their respective drivers.
Quoted 8 lines
Quoted 1 line
This patch is based on Josef Ahmad's initial work for Quark enabling.
Hi Raymond.
I see support for interrupts on GPIO input has been dropped. In fact it doesn't appear you have any IRQ support here at all.
Could you detail the reasons why ?
In general the MFD drivers are just dispatchers which split an original compound device by its slices.
Signature · 13 lines
Andy Shevchenko <[email protected]> Intel Finland Oy --------------------------------------------------------------------- Intel Finland Oy Registered Address: PL 281, 00181 Helsinki Business Identity Code: 0357606 - 4 Domiciled in Helsinki This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. ���{.n�+�������+%�����ݶ��w��{.n�+����{��G�����{ay�ʇڙ�,j��f���h��������z_�(�階�ݢj"���m������G������?����&���~��iO��z��v�^�m����������?�I�
Quoted 10 lines · Andriy
Quoted 9 lines · Bryan O'Donoghue
Quoted 5 lines · Raymond Tan
In Quark X1000, there's a single PCI device that provides both an I2C controller and a GPIO controller. This MFD driver will split the 2 devices for their respective drivers.
This patch is based on Josef Ahmad's initial work for Quark enabling.
Hi Raymond.
Quoted 7 lines
Quoted 4 lines
I see support for interrupts on GPIO input has been dropped. In fact it doesn't appear you have any IRQ support here at all.
Could you detail the reasons why ?
In general the MFD drivers are just dispatchers which split an original compound device by its slices.
+1
That's a really nice way of putting it.
Signature · 4 lines
Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
drivers/mfd/intel_quark_i2c_gpio.c line 135
Quoted 2 lines · Raymond Tan
drivers/mfd/intel_quark_i2c_gpio.c new file +2
-0+ pdata->properties->irq = pdev->irq; + pdata->properties->irq_shared = true;
OK I see it.
Thanks.
My question is. How extensively have edge triggered interrupts been tested on the GPIO block ?
The BSP reference code is quite explicit about not missing edge interrupts.
Have you tested GPIO input in edge mode ?
+irqreturn_t intel_qrk_gpio_isr(int irq, void *dev_id) +{
+ irqreturn_t ret = IRQ_NONE;
+ u32 pending = 0, gpio = 0;
+ void __iomem *reg_pending = reg_base + PORTA_INT_STATUS;
+ void __iomem *reg_eoi = reg_base + PORTA_INT_EOI;
+
+ /* Which pin (if any) triggered the interrupt */
+ while ((pending = ioread32(reg_pending))) {
+ /*
+ * Acknowledge all the asserted GPIO interrupt lines before
+ * serving them, so that we don't lose an edge.
+ * This has only effect on edge-triggered interrupts.
+ */
+ iowrite32(pending, reg_eoi);
+
+ /* Serve each asserted interrupt */
+ do {
+ gpio = __ffs(pending);
+ generic_handle_irq(
+ gpio_to_irq(INTEL_QRK_GIP_GPIO_BASE + gpio));
+ pending &= ~BIT(gpio);
+ ret = IRQ_HANDLED;
+ } while(pending);
+ }
+
+ return ret;
+}
Quoted 7 lines · Raymond Tan
drivers/mfd/intel_quark_i2c_gpio.c line 135
Quoted 2 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +2
-0+ pdata->properties->irq = pdev->irq; + pdata->properties->irq_shared = true;OK I see it.
Quoted 8 lines
Thanks.
My question is. How extensively have edge triggered interrupts been tested on the GPIO block ?
The BSP reference code is quite explicit about not missing edge interrupts.
Have you tested GPIO input in edge mode ?
We indeed test edge mode. Now all are moved to gpio-dwapb module which has been accepted by maintainer. The BSP code doesn't meet the requirement of upstream, so we totally re-implement this feature in gpio-dwapb. This patch only passes the necessary parameters and registers the platform devices.
Quoted 28 lines
(quoted diff) +27
-0+irqreturn_t intel_qrk_gpio_isr(int irq, void *dev_id) { + irqreturn_t ret = IRQ_NONE; + u32 pending = 0, gpio = 0; + void __iomem *reg_pending = reg_base + PORTA_INT_STATUS; + void __iomem *reg_eoi = reg_base + PORTA_INT_EOI; + + /* Which pin (if any) triggered the interrupt */ + while ((pending = ioread32(reg_pending))) { + /* + * Acknowledge all the asserted GPIO interrupt lines before + * serving them, so that we don't lose an edge. + * This has only effect on edge-triggered interrupts. + */ + iowrite32(pending, reg_eoi); + + /* Serve each asserted interrupt */ + do { + gpio = __ffs(pending); + generic_handle_irq( + gpio_to_irq(INTEL_QRK_GIP_GPIO_BASE + gpio)); + pending &= ~BIT(gpio); + ret = IRQ_HANDLED; + } while(pending); + } + + return ret; +}
Quoted 22 lines
-----Original Message-----
From: Chen, Alvin
Sent: Tuesday, November 4, 2014 8:46 AM
To: 'Bryan O'Donoghue'; Tan, Raymond; Lee Jones; Samuel Ortiz
Cc: [email protected]; Shevchenko, Andriy
Subject: RE: [PATCH 1/1] mfd:intel_quark_i2c_gpio: Add Intel Quark X1000 I2C-GPIO MFD DriverQuoted 14 lines · Raymond Tan
drivers/mfd/intel_quark_i2c_gpio.c line 135
Quoted 2 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +2
-0+ pdata->properties->irq = pdev->irq; + pdata->properties->irq_shared = true;OK I see it.
Thanks.
My question is. How extensively have edge triggered interrupts been tested on the GPIO block ?
The BSP reference code is quite explicit about not missing edge interrupts.
Quoted 9 lines
Quoted 1 line
Have you tested GPIO input in edge mode ?
We indeed test edge mode. Now all are moved to gpio-dwapb module which has been accepted by maintainer.
The BSP code doesn't meet the requirement of upstream, so we totally re-implement this feature in gpio-dwapb.
This patch only passes the necessary parameters and registers the platform devices.
Just double check, the support of Quark designware GPIO has been in 3.18-rc2.
Quoted 17 lines · Alvin
Quoted 17 lines
-----Original Message-----
From: Chen, Alvin
Sent: Tuesday, November 4, 2014 8:46 AM
To: 'Bryan O'Donoghue'; Tan, Raymond; Lee Jones; Samuel Ortiz
Cc: [email protected]; Shevchenko, Andriy
Subject: RE: [PATCH 1/1] mfd:intel_quark_i2c_gpio: Add Intel Quark X1000 I2C-GPIO MFD DriverQuoted 9 lines · Raymond Tan
drivers/mfd/intel_quark_i2c_gpio.c line 135
Quoted 2 lines
drivers/mfd/intel_quark_i2c_gpio.c new file +2
-0+ pdata->properties->irq = pdev->irq; + pdata->properties->irq_shared = true;OK I see it.
Thanks.
Quoted 8 lines
Quoted 8 lines
Quoted 6 lines
My question is. How extensively have edge triggered interrupts been tested on the GPIO block ?
The BSP reference code is quite explicit about not missing edge interrupts.
Have you tested GPIO input in edge mode ?
We indeed test edge mode. Now all are moved to gpio-dwapb module which has been accepted by maintainer.
OK then good enough for me.