Skip to contentSkip to conversation

drm/i915: Convert pxvid to extvid lookup table

PATCH In review Mika Kuoppala 6 participants 9 messages Nov 27, 2014 – Dec 3, 2014

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/i915: Convert pxvid to extvid lookup table

to a procedural to save space.

---
 drivers/gpu/drm/i915/intel_pm.c | 155 +++++-----------------------------------
 1 file changed, 18 insertions(+), 137 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +18 -137
index 9af0af4..78911e2 100644
@@ -5681,146 +5681,27 @@ unsigned long i915_mch_val(struct drm_i915_private *dev_priv)
 	return ((m * x) / 127) - b;
 }
 
-static u16 pvid_to_extvid(struct drm_i915_private *dev_priv, u8 pxvid)
+static int _pxvid_to_vd(u8 pxvid)
+{
+	if (pxvid == 0)
+		return 0;
+
+	if (pxvid >= 8 && pxvid < 31)
+		pxvid = 31;
+
+	return (pxvid + 2) * 125;
+}
+
+static u32 pvid_to_extvid(struct drm_i915_private *dev_priv, u8 pxvid)
 {
 	struct drm_device *dev = dev_priv->dev;
-	static const struct v_table {
-		u16 vd; /* in .1 mil */
-		u16 vm; /* in .1 mil */
-	} v_table[] = {
-		{ 0, 0, },
-		{ 375, 0, },
-		{ 500, 0, },
-		{ 625, 0, },
-		{ 750, 0, },
-		{ 875, 0, },
-		{ 1000, 0, },
-		{ 1125, 0, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4250, 3125, },
-		{ 4375, 3250, },
-		{ 4500, 3375, },
-		{ 4625, 3500, },
-		{ 4750, 3625, },
-		{ 4875, 3750, },
-		{ 5000, 3875, },
-		{ 5125, 4000, },
-		{ 5250, 4125, },
-		{ 5375, 4250, },
-		{ 5500, 4375, },
-		{ 5625, 4500, },
-		{ 5750, 4625, },
-		{ 5875, 4750, },
-		{ 6000, 4875, },
-		{ 6125, 5000, },
-		{ 6250, 5125, },
-		{ 6375, 5250, },
-		{ 6500, 5375, },
-		{ 6625, 5500, },
-		{ 6750, 5625, },
-		{ 6875, 5750, },
-		{ 7000, 5875, },
-		{ 7125, 6000, },
-		{ 7250, 6125, },
-		{ 7375, 6250, },
-		{ 7500, 6375, },
-		{ 7625, 6500, },
-		{ 7750, 6625, },
-		{ 7875, 6750, },
-		{ 8000, 6875, },
-		{ 8125, 7000, },
-		{ 8250, 7125, },
-		{ 8375, 7250, },
-		{ 8500, 7375, },
-		{ 8625, 7500, },
-		{ 8750, 7625, },
-		{ 8875, 7750, },
-		{ 9000, 7875, },
-		{ 9125, 8000, },
-		{ 9250, 8125, },
-		{ 9375, 8250, },
-		{ 9500, 8375, },
-		{ 9625, 8500, },
-		{ 9750, 8625, },
-		{ 9875, 8750, },
-		{ 10000, 8875, },
-		{ 10125, 9000, },
-		{ 10250, 9125, },
-		{ 10375, 9250, },
-		{ 10500, 9375, },
-		{ 10625, 9500, },
-		{ 10750, 9625, },
-		{ 10875, 9750, },
-		{ 11000, 9875, },
-		{ 11125, 10000, },
-		{ 11250, 10125, },
-		{ 11375, 10250, },
-		{ 11500, 10375, },
-		{ 11625, 10500, },
-		{ 11750, 10625, },
-		{ 11875, 10750, },
-		{ 12000, 10875, },
-		{ 12125, 11000, },
-		{ 12250, 11125, },
-		{ 12375, 11250, },
-		{ 12500, 11375, },
-		{ 12625, 11500, },
-		{ 12750, 11625, },
-		{ 12875, 11750, },
-		{ 13000, 11875, },
-		{ 13125, 12000, },
-		{ 13250, 12125, },
-		{ 13375, 12250, },
-		{ 13500, 12375, },
-		{ 13625, 12500, },
-		{ 13750, 12625, },
-		{ 13875, 12750, },
-		{ 14000, 12875, },
-		{ 14125, 13000, },
-		{ 14250, 13125, },
-		{ 14375, 13250, },
-		{ 14500, 13375, },
-		{ 14625, 13500, },
-		{ 14750, 13625, },
-		{ 14875, 13750, },
-		{ 15000, 13875, },
-		{ 15125, 14000, },
-		{ 15250, 14125, },
-		{ 15375, 14250, },
-		{ 15500, 14375, },
-		{ 15625, 14500, },
-		{ 15750, 14625, },
-		{ 15875, 14750, },
-		{ 16000, 14875, },
-		{ 16125, 15000, },
-	};
+	const int vd = _pxvid_to_vd(pxvid);
+	const int vm = vd - 1125;
+
 	if (INTEL_INFO(dev)->is_mobile)
-		return v_table[pxvid].vm;
-	else
-		return v_table[pxvid].vd;
+		return vm > 0 ? vm : 0;
+
+	return vd;
 }
 
 static void __i915_update_gfx_val(struct drm_i915_private *dev_priv)
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Tested-by on v1 1/1
#1 lore raw

-------------------------------------Summary-------------------------------------
Platform Delta drm-intel-nightly Series Applied
PNV -1 364/364 363/364
ILK +1-9 365/366 357/366

SNB                                  450/450              450/450
IVB                                  498/498              498/498
BYT                                  289/289              289/289

HSW -1 564/564 563/564
BDW 417/417 417/417
-------------------------------------Detailed-------------------------------------
Platform Test drm-intel-nightly Series Applied

*PNV  igt_gem_concurrent_blit_gpu-bcs-gpu-read-after-write      PASS(2, M25M23)      NO_RESULT(1, M23)
*ILK  igt_kms_flip_nonblocking-read      PASS(2, M26)      DMESG_WARN(1, M26)
 ILK  igt_kms_flip_nonexisting-fb      DMESG_WARN(1, M26)PASS(2, M26)      DMESG_WARN(1, M26)
*ILK  igt_kms_flip_rcs-flip-vs-panning-interruptible      PASS(2, M26)      DMESG_WARN(1, M26)
 ILK  igt_kms_flip_rcs-wf_vblank-vs-dpms-interruptible      DMESG_WARN(1, M26)PASS(1, M26)      DMESG_WARN(1, M26)
*ILK  igt_kms_flip_blocking-absolute-wf_vblank-interruptible      NSPT(1, M26)PASS(1, M26)      DMESG_WARN(1, M26)
*ILK  igt_kms_flip_plain-flip-fb-recreate-interruptible      PASS(2, M26)      NSPT(1, M26)
*ILK  igt_kms_flip_plain-flip-ts-check-interruptible      PASS(2, M26)      DMESG_WARN(1, M26)
*ILK  igt_kms_flip_vblank-vs-hang      PASS(2, M26)      DMESG_WARN(1, M26)
 ILK  igt_kms_flip_wf_vblank-ts-check      DMESG_WARN(2, M26)PASS(2, M26M37)      PASS(1, M26)
 ILK  igt_kms_flip_wf_vblank-vs-modeset-interruptible      DMESG_WARN(1, M26)PASS(2, M26)      DMESG_WARN(1, M26)
*HSW  igt_kms_fence_pin_leak      PASS(2, M19M20)      DMESG_WARN(1, M20)

Note: You need to pay more attention to line start with '*'
_______________________________________________
Intel-gfx mailing list [email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reviewed-by on v1 1/1
#2 lore raw
In reply to Mika Kuoppala
Quoted 16 lines · Mika Kuoppala

to a procedural to save space.

---
 drivers/gpu/drm/i915/intel_pm.c | 155 +++++-----------------------------------
 1 file changed, 18 insertions(+), 137 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +0 -1
index 9af0af4..78911e2 100644
@@ -5681,146 +5681,27 @@ unsigned long i915_mch_val(struct drm_i915_private *dev_priv)
 	return ((m * x) / 127) - b;
 }
 
-static u16 pvid_to_extvid(struct drm_i915_private *dev_priv, u8 pxvid)

drivers/gpu/drm/i915/intel_pm.c unsigned long i915_mch_val(struct drm_i915_private *dev_priv) · line 5693

Quoted 10 lines
drivers/gpu/drm/i915/intel_pm.c +10 -0
+static int _pxvid_to_vd(u8 pxvid)
+{
+	if (pxvid == 0)
+		return 0;
+
+	if (pxvid >= 8 && pxvid < 31)
+		pxvid = 31;
+
+	return (pxvid + 2) * 125;
+}

Seems simple enough as a function. I copy pasted the stuff into a small c program and it confirmed that we get identical values from the old and new code. So looks good.

Quoted 157 lines
drivers/gpu/drm/i915/intel_pm.c +8 -136
+
+static u32 pvid_to_extvid(struct drm_i915_private *dev_priv, u8 pxvid)
 {
 	struct drm_device *dev = dev_priv->dev;
-	static const struct v_table {
-		u16 vd; /* in .1 mil */
-		u16 vm; /* in .1 mil */
-	} v_table[] = {
-		{ 0, 0, },
-		{ 375, 0, },
-		{ 500, 0, },
-		{ 625, 0, },
-		{ 750, 0, },
-		{ 875, 0, },
-		{ 1000, 0, },
-		{ 1125, 0, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4250, 3125, },
-		{ 4375, 3250, },
-		{ 4500, 3375, },
-		{ 4625, 3500, },
-		{ 4750, 3625, },
-		{ 4875, 3750, },
-		{ 5000, 3875, },
-		{ 5125, 4000, },
-		{ 5250, 4125, },
-		{ 5375, 4250, },
-		{ 5500, 4375, },
-		{ 5625, 4500, },
-		{ 5750, 4625, },
-		{ 5875, 4750, },
-		{ 6000, 4875, },
-		{ 6125, 5000, },
-		{ 6250, 5125, },
-		{ 6375, 5250, },
-		{ 6500, 5375, },
-		{ 6625, 5500, },
-		{ 6750, 5625, },
-		{ 6875, 5750, },
-		{ 7000, 5875, },
-		{ 7125, 6000, },
-		{ 7250, 6125, },
-		{ 7375, 6250, },
-		{ 7500, 6375, },
-		{ 7625, 6500, },
-		{ 7750, 6625, },
-		{ 7875, 6750, },
-		{ 8000, 6875, },
-		{ 8125, 7000, },
-		{ 8250, 7125, },
-		{ 8375, 7250, },
-		{ 8500, 7375, },
-		{ 8625, 7500, },
-		{ 8750, 7625, },
-		{ 8875, 7750, },
-		{ 9000, 7875, },
-		{ 9125, 8000, },
-		{ 9250, 8125, },
-		{ 9375, 8250, },
-		{ 9500, 8375, },
-		{ 9625, 8500, },
-		{ 9750, 8625, },
-		{ 9875, 8750, },
-		{ 10000, 8875, },
-		{ 10125, 9000, },
-		{ 10250, 9125, },
-		{ 10375, 9250, },
-		{ 10500, 9375, },
-		{ 10625, 9500, },
-		{ 10750, 9625, },
-		{ 10875, 9750, },
-		{ 11000, 9875, },
-		{ 11125, 10000, },
-		{ 11250, 10125, },
-		{ 11375, 10250, },
-		{ 11500, 10375, },
-		{ 11625, 10500, },
-		{ 11750, 10625, },
-		{ 11875, 10750, },
-		{ 12000, 10875, },
-		{ 12125, 11000, },
-		{ 12250, 11125, },
-		{ 12375, 11250, },
-		{ 12500, 11375, },
-		{ 12625, 11500, },
-		{ 12750, 11625, },
-		{ 12875, 11750, },
-		{ 13000, 11875, },
-		{ 13125, 12000, },
-		{ 13250, 12125, },
-		{ 13375, 12250, },
-		{ 13500, 12375, },
-		{ 13625, 12500, },
-		{ 13750, 12625, },
-		{ 13875, 12750, },
-		{ 14000, 12875, },
-		{ 14125, 13000, },
-		{ 14250, 13125, },
-		{ 14375, 13250, },
-		{ 14500, 13375, },
-		{ 14625, 13500, },
-		{ 14750, 13625, },
-		{ 14875, 13750, },
-		{ 15000, 13875, },
-		{ 15125, 14000, },
-		{ 15250, 14125, },
-		{ 15375, 14250, },
-		{ 15500, 14375, },
-		{ 15625, 14500, },
-		{ 15750, 14625, },
-		{ 15875, 14750, },
-		{ 16000, 14875, },
-		{ 16125, 15000, },
-	};
+	const int vd = _pxvid_to_vd(pxvid);
+	const int vm = vd - 1125;
+
 	if (INTEL_INFO(dev)->is_mobile)
-		return v_table[pxvid].vm;
-	else
-		return v_table[pxvid].vd;
+		return vm > 0 ? vm : 0;
+
+	return vd;
 }
 
 static void __i915_update_gfx_val(struct drm_i915_private *dev_priv)
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 6 lines
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw
Quoted 2 lines · Ville Syrjälä
Quoted 1 line · Mika Kuoppala

to a procedural to save space.

I really don't like this style of changelog (run on sentences from the subject). For the benefit of verbosity, could you measure the impact of the change in data/txt size.
-Chris

Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw
Quoted 7 lines · Chris Wilson
Quoted 2 lines · Ville Syrjälä
Quoted 1 line · Mika Kuoppala

to a procedural to save space.

I really don't like this style of changelog (run on sentences from the subject). For the benefit of verbosity, could you measure the impact of the change in data/txt size.

Yeah those stats would be nice to add to the commit message. Merged meanwhile, but please follow up.

Thanks, Daniel

Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
maintainer
#5 lore raw
In reply to Chris Wilson
Quoted 6 lines · Chris Wilson
Quoted 2 lines · Ville Syrjälä
Quoted 1 line · Mika Kuoppala

to a procedural to save space.

I really don't like this style of changelog (run on sentences from the subject).

Agreed. In general, the commit message should make sense on its own, without the subject line.

BR,
Jani.

Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#6 lore raw

PATCH 1/1 drm/i915: Convert pxvid to extvid lookup table to a function

In reply to Chris Wilson

From: Mika Kuoppala <[email protected]>

The conversion table can be replaced with simple enough function.

text data bss dec hex filename

 839688	  10987	     24	 850699	  cfb0b	drivers/gpu/drm/i915/i915.ko
 839224	  10987	     24	 850235	  cf93b	drivers/gpu/drm/i915/i915.ko

Result is 494 saved bytes (.05525%).

v2: - no run on sentences from subject (Chris, Jani)
- be verbose about the savings (Chris, Daniel)

---
 drivers/gpu/drm/i915/intel_pm.c | 155 +++++-----------------------------------
 1 file changed, 18 insertions(+), 137 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +18 -137
index 9af0af4..78911e2 100644
@@ -5681,146 +5681,27 @@ unsigned long i915_mch_val(struct drm_i915_private *dev_priv)
 	return ((m * x) / 127) - b;
 }
 
-static u16 pvid_to_extvid(struct drm_i915_private *dev_priv, u8 pxvid)
+static int _pxvid_to_vd(u8 pxvid)
+{
+	if (pxvid == 0)
+		return 0;
+
+	if (pxvid >= 8 && pxvid < 31)
+		pxvid = 31;
+
+	return (pxvid + 2) * 125;
+}
+
+static u32 pvid_to_extvid(struct drm_i915_private *dev_priv, u8 pxvid)
 {
 	struct drm_device *dev = dev_priv->dev;
-	static const struct v_table {
-		u16 vd; /* in .1 mil */
-		u16 vm; /* in .1 mil */
-	} v_table[] = {
-		{ 0, 0, },
-		{ 375, 0, },
-		{ 500, 0, },
-		{ 625, 0, },
-		{ 750, 0, },
-		{ 875, 0, },
-		{ 1000, 0, },
-		{ 1125, 0, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4125, 3000, },
-		{ 4250, 3125, },
-		{ 4375, 3250, },
-		{ 4500, 3375, },
-		{ 4625, 3500, },
-		{ 4750, 3625, },
-		{ 4875, 3750, },
-		{ 5000, 3875, },
-		{ 5125, 4000, },
-		{ 5250, 4125, },
-		{ 5375, 4250, },
-		{ 5500, 4375, },
-		{ 5625, 4500, },
-		{ 5750, 4625, },
-		{ 5875, 4750, },
-		{ 6000, 4875, },
-		{ 6125, 5000, },
-		{ 6250, 5125, },
-		{ 6375, 5250, },
-		{ 6500, 5375, },
-		{ 6625, 5500, },
-		{ 6750, 5625, },
-		{ 6875, 5750, },
-		{ 7000, 5875, },
-		{ 7125, 6000, },
-		{ 7250, 6125, },
-		{ 7375, 6250, },
-		{ 7500, 6375, },
-		{ 7625, 6500, },
-		{ 7750, 6625, },
-		{ 7875, 6750, },
-		{ 8000, 6875, },
-		{ 8125, 7000, },
-		{ 8250, 7125, },
-		{ 8375, 7250, },
-		{ 8500, 7375, },
-		{ 8625, 7500, },
-		{ 8750, 7625, },
-		{ 8875, 7750, },
-		{ 9000, 7875, },
-		{ 9125, 8000, },
-		{ 9250, 8125, },
-		{ 9375, 8250, },
-		{ 9500, 8375, },
-		{ 9625, 8500, },
-		{ 9750, 8625, },
-		{ 9875, 8750, },
-		{ 10000, 8875, },
-		{ 10125, 9000, },
-		{ 10250, 9125, },
-		{ 10375, 9250, },
-		{ 10500, 9375, },
-		{ 10625, 9500, },
-		{ 10750, 9625, },
-		{ 10875, 9750, },
-		{ 11000, 9875, },
-		{ 11125, 10000, },
-		{ 11250, 10125, },
-		{ 11375, 10250, },
-		{ 11500, 10375, },
-		{ 11625, 10500, },
-		{ 11750, 10625, },
-		{ 11875, 10750, },
-		{ 12000, 10875, },
-		{ 12125, 11000, },
-		{ 12250, 11125, },
-		{ 12375, 11250, },
-		{ 12500, 11375, },
-		{ 12625, 11500, },
-		{ 12750, 11625, },
-		{ 12875, 11750, },
-		{ 13000, 11875, },
-		{ 13125, 12000, },
-		{ 13250, 12125, },
-		{ 13375, 12250, },
-		{ 13500, 12375, },
-		{ 13625, 12500, },
-		{ 13750, 12625, },
-		{ 13875, 12750, },
-		{ 14000, 12875, },
-		{ 14125, 13000, },
-		{ 14250, 13125, },
-		{ 14375, 13250, },
-		{ 14500, 13375, },
-		{ 14625, 13500, },
-		{ 14750, 13625, },
-		{ 14875, 13750, },
-		{ 15000, 13875, },
-		{ 15125, 14000, },
-		{ 15250, 14125, },
-		{ 15375, 14250, },
-		{ 15500, 14375, },
-		{ 15625, 14500, },
-		{ 15750, 14625, },
-		{ 15875, 14750, },
-		{ 16000, 14875, },
-		{ 16125, 15000, },
-	};
+	const int vd = _pxvid_to_vd(pxvid);
+	const int vm = vd - 1125;
+
 	if (INTEL_INFO(dev)->is_mobile)
-		return v_table[pxvid].vm;
-	else
-		return v_table[pxvid].vd;
+		return vm > 0 ? vm : 0;
+
+	return vd;
 }
 
 static void __i915_update_gfx_val(struct drm_i915_private *dev_priv)
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#7 lore raw

Re: [PATCH] drm/i915: Convert pxvid to extvid lookup table to a function

Quoted 8 lines · Mika Kuoppala

From: Mika Kuoppala <[email protected]>

The conversion table can be replaced with simple enough function.

text data bss dec hex filename

 839688	  10987	     24	 850699	  cfb0b	drivers/gpu/drm/i915/i915.ko
 839224	  10987	     24	 850235	  cf93b	drivers/gpu/drm/i915/i915.ko
Quoted 7 lines

Result is 494 saved bytes (.05525%).

v2: - no run on sentences from subject (Chris, Jani)
- be verbose about the savings (Chris, Daniel)

Updated the patch, thanks for the revised commit message. -Daniel

Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Tested-by on v1 1/1
#8 lore raw

Re: [PATCH] drm/i915: Convert pxvid to extvid lookup table to a function

In reply to Mika Kuoppala

-------------------------------------Summary-------------------------------------
Platform Delta drm-intel-nightly Series Applied
PNV -1 364/364 363/364
ILK +1-9 365/366 357/366

SNB                                  450/450              450/450
IVB                                  498/498              498/498
BYT                                  289/289              289/289

HSW -1 564/564 563/564
BDW 417/417 417/417
-------------------------------------Detailed-------------------------------------
Platform Test drm-intel-nightly Series Applied

*PNV  igt_gem_concurrent_blit_gpu-bcs-gpu-read-after-write      PASS(2, M25M23)      NO_RESULT(1, M23)
*ILK  igt_kms_flip_nonblocking-read      PASS(2, M26)      DMESG_WARN(1, M26)
 ILK  igt_kms_flip_nonexisting-fb      DMESG_WARN(1, M26)PASS(2, M26)      DMESG_WARN(1, M26)
*ILK  igt_kms_flip_rcs-flip-vs-panning-interruptible      PASS(3, M26)      DMESG_WARN(1, M26)
 ILK  igt_kms_flip_rcs-wf_vblank-vs-dpms-interruptible      DMESG_WARN(1, M26)PASS(1, M26)      DMESG_WARN(1, M26)
*ILK  igt_kms_flip_blocking-absolute-wf_vblank-interruptible      NSPT(1, M26)PASS(2, M26)      DMESG_WARN(1, M26)
*ILK  igt_kms_flip_plain-flip-fb-recreate-interruptible      PASS(3, M26)      NSPT(1, M26)
 ILK  igt_kms_flip_plain-flip-ts-check-interruptible      DMESG_WARN(2, M26)PASS(3, M26)      DMESG_WARN(1, M26)
 ILK  igt_kms_flip_vblank-vs-hang      DMESG_WARN(1, M26)PASS(3, M26)      DMESG_WARN(1, M26)
 ILK  igt_kms_flip_wf_vblank-ts-check      DMESG_WARN(2, M26)PASS(10, M26M37)      PASS(1, M26)
 ILK  igt_kms_flip_wf_vblank-vs-modeset-interruptible      DMESG_WARN(2, M26)PASS(3, M26)      DMESG_WARN(1, M26)
*HSW  igt_kms_fence_pin_leak      PASS(3, M19M20)      DMESG_WARN(1, M20)

Note: You need to pay more attention to line start with '*'
_______________________________________________
Intel-gfx mailing list [email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx