Skip to contentSkip to conversation

drm/i915: Enabling RC6 immediately instead of enabling via delayed work item

PATCH In review [email protected] 3 participants 5 messages Dec 1, 2014

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 drm/i915: Enabling RC6 immediately instead of enabling via delayed work item

From: Sagar Kamble <[email protected]>

RC6 was getting enabled through deferred work item which was scheduled after 1s. This will keep render and media well ON for 1s. Since RC6 enabling does not involve PCU communication, processing time in intel_enable_gt_powersave will not be increased. Enabling RC6 immediately will help power gate render and media well immediately that will save power.

---
 drivers/gpu/drm/i915/intel_pm.c | 88 ++++++++++++++++++++++++++++-------------
 1 file changed, 61 insertions(+), 27 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +61 -27
index 9af0af4..1fb3084 100644
@@ -5276,11 +5276,11 @@ static void valleyview_cleanup_gt_powersave(struct drm_device *dev)
 	valleyview_cleanup_pctx(dev);
 }
 
-static void cherryview_enable_rps(struct drm_device *dev)
+static void cherryview_enable_rc6(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_engine_cs *ring;
-	u32 gtfifodbg, val, rc6_mode = 0, pcbr;
+	u32 gtfifodbg, rc6_mode = 0, pcbr;
 	int i;
 
 	WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
@@ -5294,10 +5294,10 @@ static void cherryview_enable_rps(struct drm_device *dev)
 
 	cherryview_check_pctx(dev_priv);
 
-	/* 1a & 1b: Get forcewake during program sequence. Although the driver
-	 * hasn't enabled a state yet where we need forcewake, BIOS may have.*/
-	gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL);
-
+	/*
+	 * Assuming RC6 disabled by uncore_sanitize we dont need to do
+	 * force wake get/put here.
+	 */
 	/* 2a: Program RC6 thresholds.*/
 	I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16);
 	I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); /* 12500 * 1280ns */
@@ -5324,6 +5324,18 @@ static void cherryview_enable_rps(struct drm_device *dev)
 		rc6_mode = GEN6_RC_CTL_EI_MODE(1);
 
 	I915_WRITE(GEN6_RC_CONTROL, rc6_mode);
+}
+
+static void cherryview_enable_rps(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 val;
+
+	WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
+
+	/* 1a & 1b: Get forcewake during program sequence. Although the driver
+	 * hasn't enabled a state yet where we need forcewake, BIOS may have.*/
+	gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL);
 
 	/* 4 Program defaults and thresholds for RPS*/
 	I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400);
@@ -5367,11 +5379,11 @@ static void cherryview_enable_rps(struct drm_device *dev)
 	gen6_gt_force_wake_put(dev_priv, FORCEWAKE_ALL);
 }
 
-static void valleyview_enable_rps(struct drm_device *dev)
+static void valleyview_enable_rc6(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_engine_cs *ring;
-	u32 gtfifodbg, val, rc6_mode = 0;
+	u32 gtfifodbg, rc6_mode = 0;
 	int i;
 
 	WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
@@ -5384,25 +5396,10 @@ static void valleyview_enable_rps(struct drm_device *dev)
 		I915_WRITE(GTFIFODBG, gtfifodbg);
 	}
 
-	/* If VLV, Forcewake all wells, else re-direct to regular path */
-	gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL);
-
-	I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400);
-	I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000);
-	I915_WRITE(GEN6_RP_UP_EI, 66000);
-	I915_WRITE(GEN6_RP_DOWN_EI, 350000);
-
-	I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
-	I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 0xf4240);
-
-	I915_WRITE(GEN6_RP_CONTROL,
-		   GEN6_RP_MEDIA_TURBO |
-		   GEN6_RP_MEDIA_HW_NORMAL_MODE |
-		   GEN6_RP_MEDIA_IS_GFX |
-		   GEN6_RP_ENABLE |
-		   GEN6_RP_UP_BUSY_AVG |
-		   GEN6_RP_DOWN_IDLE_CONT);
-
+	/*
+	 * Assuming RC6 disabled by uncore_sanitize we dont need to do
+	 * force wake get/put here.
+	 */
 	I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 0x00280000);
 	I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000);
 	I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25);
@@ -5425,6 +5422,32 @@ static void valleyview_enable_rps(struct drm_device *dev)
 	intel_print_rc6_info(dev, rc6_mode);
 
 	I915_WRITE(GEN6_RC_CONTROL, rc6_mode);
+}
+
+static void valleyview_enable_rps(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 val;
+
+	WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
+
+	gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL);
+
+	I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400);
+	I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000);
+	I915_WRITE(GEN6_RP_UP_EI, 66000);
+	I915_WRITE(GEN6_RP_DOWN_EI, 350000);
+
+	I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
+	I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 0xf4240);
+
+	I915_WRITE(GEN6_RP_CONTROL,
+		   GEN6_RP_MEDIA_TURBO |
+		   GEN6_RP_MEDIA_HW_NORMAL_MODE |
+		   GEN6_RP_MEDIA_IS_GFX |
+		   GEN6_RP_ENABLE |
+		   GEN6_RP_UP_BUSY_AVG |
+		   GEN6_RP_DOWN_IDLE_CONT);
 
 	val = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS);
 
@@ -6295,6 +6318,17 @@ void intel_enable_gt_powersave(struct drm_device *dev)
 		mutex_unlock(&dev->struct_mutex);
 	} else if (INTEL_INFO(dev)->gen >= 6) {
 		/*
+		 * Enabling RC6 for VLV & CHV here itself and only deferring turbo
+		 * enabling.
+		 */
+		mutex_lock(&dev_priv->rps.hw_lock);
+		if (IS_CHERRYVIEW(dev))
+			cherryview_enable_rc6(dev);
+		else if (IS_VALLEYVIEW(dev))
+			valleyview_enable_rc6(dev);
+		mutex_unlock(&dev_priv->rps.hw_lock);
+
+		/*
 		 * PCU communication is slow and this doesn't need to be
 		 * done at any specific time, so do this out of our fast path
 		 * to make resume and init faster.
Signature · 6 lines
1.8.5

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH 2/2 drm/i915: Deferring uncore early sanitize, sanitize, disable pc8 to resume

From: Sagar Kamble <[email protected]>

Due to disabling of RC6 in uncore_sanitize in early resume, power is drained till it RC6 is re-enabled post resume.
With this change RC6 disabling will be done at beginning of resume only. This helps yield additional power benefits.

---
 drivers/gpu/drm/i915/i915_drv.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +7 -6
index 71be3c9..0e08ec0 100644
@@ -675,6 +675,13 @@ static int i915_drm_resume(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
+	intel_uncore_early_sanitize(dev, true);
+
+	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
+		hsw_disable_pc8(dev_priv);
+
+	intel_uncore_sanitize(dev);
+
 	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
 		mutex_lock(&dev->struct_mutex);
 		i915_gem_restore_gtt_mappings(dev);
@@ -761,12 +768,6 @@ static int i915_drm_resume_early(struct drm_device *dev)
 	if (ret)
 		DRM_ERROR("Resume prepare failed: %d,Continuing resume\n", ret);
 
-	intel_uncore_early_sanitize(dev, true);
-
-	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
-		hsw_disable_pc8(dev_priv);
-
-	intel_uncore_sanitize(dev);
 	intel_power_domains_init_hw(dev_priv);
 
 	return ret;
Signature · 6 lines
1.8.5

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by Takashi Iwai on v1 2/2
#2 lore raw

Re: [PATCH v1 2/2] drm/i915: Deferring uncore early sanitize, sanitize, disable pc8 to resume

Quoted 9 lines · On Mon, Dec 01, 2014 at 12:28:05PM +0530, [email protected] wrote:

From: Sagar Kamble <[email protected]>

Due to disabling of RC6 in uncore_sanitize in early resume, power is drained till it RC6 is re-enabled post resume.
With this change RC6 disabling will be done at beginning of resume only. This helps yield additional power benefits.

A bit of git blame turns up

commit 76c4b250080fff6e4befaa3619942422fd0ea380

Author: Imre Deak <[email protected]>
Date:   Tue Apr 1 19:55:22 2014 +0300

drm/i915: move power domain init earlier during system resume

During resume the intel hda audio driver depends on the i915 driver reinitializing the audio power domain. Since the order of calling the i915 resume handler wrt. that of the audio driver is not guaranteed, move the power domain reinitialization step to the resume_early handler. This is guaranteed to run before the resume handler of any other driver.

The power domain initialization in turn requires us to enable the i915 pci device first, so move that part earlier too.

Accordingly disabling of the i915 pci device should happen after the audio suspend handler ran. So move the disabling later from the i915 resume handler to the resume_late handler.

v2:
- move intel_uncore_sanitize/early_sanitize earlier too, so they don't get reordered wrt. intel_power_domains_init_hw()

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76152

[danvet: Add cc: stable and loud comments that this is just a hack.]

[danvet: Fix "Should it be static?" sparse warning reported by Wu Fengguang's kbuilder.]

How does this patch not break stuff?

And a general rule of thumb: If you change anything in the driver load sequence please digg around in the git historly (with git log --pickaxe and git blame) to gather evidence for your changes and make sure you don't break anything.

Thanks, Daniel

Quoted 42 lines
---
 drivers/gpu/drm/i915/i915_drv.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +7 -6
index 71be3c9..0e08ec0 100644
@@ -675,6 +675,13 @@ static int i915_drm_resume(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
+	intel_uncore_early_sanitize(dev, true);
+
+	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
+		hsw_disable_pc8(dev_priv);
+
+	intel_uncore_sanitize(dev);
+
 	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
 		mutex_lock(&dev->struct_mutex);
 		i915_gem_restore_gtt_mappings(dev);
@@ -761,12 +768,6 @@ static int i915_drm_resume_early(struct drm_device *dev)
 	if (ret)
 		DRM_ERROR("Resume prepare failed: %d,Continuing resume\n", ret);
 
-	intel_uncore_early_sanitize(dev, true);
-
-	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
-		hsw_disable_pc8(dev_priv);
-
-	intel_uncore_sanitize(dev);
 	intel_power_domains_init_hw(dev_priv);
 
 	return ret;
Signature · 6 lines
1.8.5

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

Re: [PATCH v1 2/2] drm/i915: Deferring uncore early sanitize, sanitize, disable pc8 to resume

Thanks Daniel.
This particular commit is moving power_domain_init into resume early. Does not have details about ordering with uncore early sanitize and uncore sanitize.

Imre,
Can you please clarify why this ordering with power domain init was done?

Thanks,
Sagar

Quoted 90 lines · Daniel Vetter
Quoted 9 lines · On Mon, Dec 01, 2014 at 12:28:05PM +0530, [email protected] wrote:

From: Sagar Kamble <[email protected]>

Due to disabling of RC6 in uncore_sanitize in early resume, power is drained till it RC6 is re-enabled post resume.
With this change RC6 disabling will be done at beginning of resume only. This helps yield additional power benefits.

A bit of git blame turns up

commit 76c4b250080fff6e4befaa3619942422fd0ea380

Author: Imre Deak <[email protected]>
Date:   Tue Apr 1 19:55:22 2014 +0300

drm/i915: move power domain init earlier during system resume

During resume the intel hda audio driver depends on the i915 driver reinitializing the audio power domain. Since the order of calling the i915 resume handler wrt. that of the audio driver is not guaranteed, move the power domain reinitialization step to the resume_early handler. This is guaranteed to run before the resume handler of any other driver.

The power domain initialization in turn requires us to enable the i915 pci device first, so move that part earlier too.

Accordingly disabling of the i915 pci device should happen after the audio suspend handler ran. So move the disabling later from the i915 resume handler to the resume_late handler.

v2:
- move intel_uncore_sanitize/early_sanitize earlier too, so they don't get reordered wrt. intel_power_domains_init_hw()

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76152

[danvet: Add cc: stable and loud comments that this is just a hack.]

[danvet: Fix "Should it be static?" sparse warning reported by Wu Fengguang's kbuilder.]

How does this patch not break stuff?

And a general rule of thumb: If you change anything in the driver load sequence please digg around in the git historly (with git log --pickaxe and git blame) to gather evidence for your changes and make sure you don't break anything.

Thanks, Daniel

Quoted 34 lines
---
 drivers/gpu/drm/i915/i915_drv.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +7 -6
index 71be3c9..0e08ec0 100644
@@ -675,6 +675,13 @@ static int i915_drm_resume(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
+	intel_uncore_early_sanitize(dev, true);
+
+	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
+		hsw_disable_pc8(dev_priv);
+
+	intel_uncore_sanitize(dev);
+
 	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
 		mutex_lock(&dev->struct_mutex);
 		i915_gem_restore_gtt_mappings(dev);
@@ -761,12 +768,6 @@ static int i915_drm_resume_early(struct drm_device *dev)
 	if (ret)
 		DRM_ERROR("Resume prepare failed: %d,Continuing resume\n", ret);
 
-	intel_uncore_early_sanitize(dev, true);
-
-	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
-		hsw_disable_pc8(dev_priv);
-
-	intel_uncore_sanitize(dev);
 	intel_power_domains_init_hw(dev_priv);
 
Quoted 9 lines
Quoted 8 lines
drivers/gpu/drm/i915/i915_drv.c +0 -0
 	return ret;
Signature · 6 lines
1.8.5

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

#4 lore raw

Re: [PATCH v1 2/2] drm/i915: Deferring uncore early sanitize, sanitize, disable pc8 to resume

Quoted 8 lines · Sagar Arun Kamble

Thanks Daniel.
This particular commit is moving power_domain_init into resume early. Does not have details about ordering with uncore early sanitize and uncore sanitize.

Imre,
Can you please clarify why this ordering with power domain init was done?

We call intel_uncore_early_sanitize() and intel_uncore_sanitize() before any other HW access. They are called from i915_drm_resume_early() since the hda driver's resume handler can run before i915_drm_resume() is called. The hda resume handler can in turn request the display power well resulting in an i915 HW access.

Quoted 106 lines

Thanks,
Sagar

Quoted 90 lines · Daniel Vetter
Quoted 9 lines · On Mon, Dec 01, 2014 at 12:28:05PM +0530, [email protected] wrote:

From: Sagar Kamble <[email protected]>

Due to disabling of RC6 in uncore_sanitize in early resume, power is drained till it RC6 is re-enabled post resume.
With this change RC6 disabling will be done at beginning of resume only. This helps yield additional power benefits.

A bit of git blame turns up

commit 76c4b250080fff6e4befaa3619942422fd0ea380

Author: Imre Deak <[email protected]>
Date:   Tue Apr 1 19:55:22 2014 +0300

drm/i915: move power domain init earlier during system resume

During resume the intel hda audio driver depends on the i915 driver reinitializing the audio power domain. Since the order of calling the i915 resume handler wrt. that of the audio driver is not guaranteed, move the power domain reinitialization step to the resume_early handler. This is guaranteed to run before the resume handler of any other driver.

The power domain initialization in turn requires us to enable the i915 pci device first, so move that part earlier too.

Accordingly disabling of the i915 pci device should happen after the audio suspend handler ran. So move the disabling later from the i915 resume handler to the resume_late handler.

v2:
- move intel_uncore_sanitize/early_sanitize earlier too, so they don't get reordered wrt. intel_power_domains_init_hw()

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76152

[danvet: Add cc: stable and loud comments that this is just a hack.]

[danvet: Fix "Should it be static?" sparse warning reported by Wu Fengguang's kbuilder.]

How does this patch not break stuff?

And a general rule of thumb: If you change anything in the driver load sequence please digg around in the git historly (with git log --pickaxe and git blame) to gather evidence for your changes and make sure you don't break anything.

Thanks, Daniel

Quoted 34 lines
---
 drivers/gpu/drm/i915/i915_drv.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +7 -6
index 71be3c9..0e08ec0 100644
@@ -675,6 +675,13 @@ static int i915_drm_resume(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
+	intel_uncore_early_sanitize(dev, true);
+
+	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
+		hsw_disable_pc8(dev_priv);
+
+	intel_uncore_sanitize(dev);
+
 	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
 		mutex_lock(&dev->struct_mutex);
 		i915_gem_restore_gtt_mappings(dev);
@@ -761,12 +768,6 @@ static int i915_drm_resume_early(struct drm_device *dev)
 	if (ret)
 		DRM_ERROR("Resume prepare failed: %d,Continuing resume\n", ret);
 
-	intel_uncore_early_sanitize(dev, true);
-
-	if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
-		hsw_disable_pc8(dev_priv);
-
-	intel_uncore_sanitize(dev);
 	intel_power_domains_init_hw(dev_priv);
 
Quoted 9 lines
Quoted 8 lines
drivers/gpu/drm/i915/i915_drv.c +0 -0
 	return ret;
Signature · 6 lines
1.8.5

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx