Skip to contentSkip to conversation

clocksource: kona: fix __iomem annotation

PATCH In review Olof Johansson 2 participants 2 messages Dec 8, 2014

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 clocksource: kona: fix __iomem annotation

It makes no sense to hide the __iomem annotation from the function that uses it, especially since it causes a sparse warning:

drivers/clocksource/bcm_kona_timer.c:118:38: warning: incorrect type in argument 1 (different address spaces)
drivers/clocksource/bcm_kona_timer.c:118:38: expected void *timer_base
drivers/clocksource/bcm_kona_timer.c:118:38: got void [noderef] <asn:2>*static [toplevel] tmr_regs

---
 drivers/clocksource/bcm_kona_timer.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/clocksource/bcm_kona_timer.c +4 -5
index 0595dc6..f1e33d0 100644
@@ -68,9 +68,8 @@ static void kona_timer_disable_and_clear(void __iomem *base)
 }
 
 static void
-kona_timer_get_counter(void *timer_base, uint32_t *msw, uint32_t *lsw)
+kona_timer_get_counter(void __iomem *timer_base, uint32_t *msw, uint32_t *lsw)
 {
-	void __iomem *base = IOMEM(timer_base);
 	int loop_limit = 4;
 
 	/*
@@ -86,9 +85,9 @@ kona_timer_get_counter(void *timer_base, uint32_t *msw, uint32_t *lsw)
 	 */
 
 	while (--loop_limit) {
-		*msw = readl(base + KONA_GPTIMER_STCHI_OFFSET);
-		*lsw = readl(base + KONA_GPTIMER_STCLO_OFFSET);
-		if (*msw == readl(base + KONA_GPTIMER_STCHI_OFFSET))
+		*msw = readl(timer_base + KONA_GPTIMER_STCHI_OFFSET);
+		*lsw = readl(timer_base + KONA_GPTIMER_STCLO_OFFSET);
+		if (*msw == readl(timer_base + KONA_GPTIMER_STCHI_OFFSET))
 			break;
 	}
 	if (!loop_limit) {
Signature · 1 line
1.7.10.4
Acked-by on v1 1/1
#1 lore raw
Quoted 8 lines · Olof Johansson

It makes no sense to hide the __iomem annotation from the function that uses it, especially since it causes a sparse warning:

drivers/clocksource/bcm_kona_timer.c:118:38: warning: incorrect type in argument 1 (different address spaces)
drivers/clocksource/bcm_kona_timer.c:118:38: expected void *timer_base
drivers/clocksource/bcm_kona_timer.c:118:38: got void [noderef] <asn:2>*static [toplevel] tmr_regs

Quoted 33 lines
---
 drivers/clocksource/bcm_kona_timer.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/clocksource/bcm_kona_timer.c +4 -5
index 0595dc6..f1e33d0 100644
@@ -68,9 +68,8 @@ static void kona_timer_disable_and_clear(void __iomem *base)
 }
 
 static void
-kona_timer_get_counter(void *timer_base, uint32_t *msw, uint32_t *lsw)
+kona_timer_get_counter(void __iomem *timer_base, uint32_t *msw, uint32_t *lsw)
 {
-	void __iomem *base = IOMEM(timer_base);
 	int loop_limit = 4;
 
 	/*
@@ -86,9 +85,9 @@ kona_timer_get_counter(void *timer_base, uint32_t *msw, uint32_t *lsw)
 	 */
 
 	while (--loop_limit) {
-		*msw = readl(base + KONA_GPTIMER_STCHI_OFFSET);
-		*lsw = readl(base + KONA_GPTIMER_STCLO_OFFSET);
-		if (*msw == readl(base + KONA_GPTIMER_STCHI_OFFSET))
+		*msw = readl(timer_base + KONA_GPTIMER_STCHI_OFFSET);
+		*lsw = readl(timer_base + KONA_GPTIMER_STCLO_OFFSET);
+		if (*msw == readl(timer_base + KONA_GPTIMER_STCHI_OFFSET))
 			break;
 	}
 	if (!loop_limit) {