fdfe0739876: Failed to mount
FYI, we noticed the below changes on
After the commit, the file system failed to mount as in stderr file attached.
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4.git dev
commit fdfe073987619ec375da8d8a2701ab271d1b1339 ("ext4: fix potential use after free during resize")
testbox/testcase/testparams: nhm4/fsmark/performance-1x-32t-1HDD-ext4-16MB-60G-NoSync-16d-256fpd
2f2d74ef698b163a fdfe073987619ec375da8d8a27
---------------- --------------------------
fail:runs %reproduction fail:runs
| | |
:20 80% 16:20 stderr.mount:wrong_fs_type,bad_option,bad_superblock_on/dev/sda1
:20 80% 16:20 stderr.missing_codepage_or_helper_program,or_other_error
:20 80% 16:20 stderr.In_some_cases_useful_info_is_found_in_syslog-try
:20 80% 16:20 stderr.dmesg|tail_or_so
:20 80% 16:20 last_state.fs.exit_code.32
:20 80% 16:20 last_state.has_stderr
:20 15% 3:20 last_state.running
4:20 -20% :20 last_state.bootingnhm4: Nehalem
Memory: 4G
To reproduce:
apt-get install ruby ruby-oj
git clone git://git.kernel.org/pub/scm/linux/kernel/git/wfg/lkp-tests.git
cd lkp-tests
bin/setup-local job.yaml # the job file attached in this email
bin/run-local job.yaml
Disclaimer:
Results have been estimated based on internal Intel analysis and are provided for informational purposes only. Any difference in system hardware or software design or configuration may affect actual performance.
Thanks,
Fengguang
_______________________________________________
LKP mailing list
LKP(a)linux.intel.com
---
testcase: fsmarkdefault_monitors:
wait: pre-test
uptime:
iostat:
vmstat:
numa-numastat:
numa-vmstat:
numa-meminfo:
proc-vmstat:
proc-stat:
meminfo:
slabinfo:
interrupts:
lock_stat:
latency_stats:
softirqs:
bdi_dev_mapping:
diskstats:
cpuidle:
cpufreq:
turbostat:
sched_debug:
interval: 10
pmeter:default_watchdogs:
watch-oom:
watchdog:cpufreq_governor:
- performance
commit: 8191d07dbb16ae88cc2bc475584b9f185f02795f
model: Nehalemnr_cpu: 8
memory: 4Ghdd_partitions: "/dev/disk/by-id/ata-WDC_WD1003FBYZ-010FB0_WD-WCAW36812041-part1"swap_partitions: "/dev/disk/by-id/ata-WDC_WD1003FBYZ-010FB0_WD-WCAW36812041-part2"rootfs_partition: "/dev/disk/by-id/ata-WDC_WD1003FBYZ-010FB0_WD-WCAW36812041-part3"
iterations: 1xnr_threads: 32t
disk: 1HDD
fs:
- ext4
fs2:
-
fsmark:
filesize: 16MB
test_size: 60G
sync_method:
- NoSync
nr_directories: 16d
nr_files_per_directory: 256fpd
testbox: nhm4tbox_group: nhm4
kconfig: x86_64-rhelenqueue_time: 2014-12-05 21:42:14.918960219 +08:00head_commit: 8191d07dbb16ae88cc2bc475584b9f185f02795fbase_commit: 009d0431c3914de64666bec0d350e54fdd59df6a
branch: next/master
kernel: "/kernel/x86_64-rhel/8191d07dbb16ae88cc2bc475584b9f185f02795f/vmlinuz-3.18.0-rc7-next-20141205-g8191d07"
user: lkp
queue: cyclic
rootfs: debian-x86_64.cgzresult_root: "/result/nhm4/fsmark/performance-1x-32t-1HDD-ext4-16MB-60G-NoSync-16d-256fpd/debian-x86_64.cgz/x86_64-rhel/8191d07dbb16ae88cc2bc475584b9f185f02795f/0"job_file: "/lkp/scheduled/nhm4/cyclic_fsmark-performance-1x-32t-1HDD-ext4-16MB-60G-NoSync-16d-256fpd-x86_64-rhel-HEAD-8191d07dbb16ae88cc2bc475584b9f185f02795f-0.yaml"dequeue_time: 2014-12-06 11:57:08.327465988 +08:00job_state: failed
loadavg: 0.24 0.06 0.02 1/146 1789start_time: ''end_time: '1417838258'
version: "/lkp/lkp/.src-20141206-060219"
echo performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu5/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu6/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu7/cpufreq/scaling_governor mkfs -t ext4 -q -F /dev/sda1
mount -t ext4 /dev/sda1 /fs/sda1
mount: wrong fs type, bad option, bad superblock on /dev/sda1,
missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so
Quoted 6 lines · Huang Ying
FYI, we noticed the below changes on
After the commit, the file system failed to mount as in stderr file attached.
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4.gitdev
commitfdfe073987619ec375da8d8a2701ab271d1b1339("ext4: fix potential use after free during resize")
This was dropped from the ext4 dev branch a few days ago....
- Ted