Skip to contentSkip to conversation

ipmi: Cleanup DEBUG_TIMING ifdef usage

RFC PATCH Superseded John Stultz 3 participants 8 messages Jan 7, 2015 – Jan 9, 2015 IPMI

lore
Share & tools
lore
#0 lore raw

RFC PATCH 1/2 ipmi: Cleanup DEBUG_TIMING ifdef usage

The driver uses #ifdef DEBUG_TIMING in order to conditionally print out timestamped debug messages. Unfortunately it adds the ifdefs all over the usage sites.

This patch cleans it up by adding a debug_timestamp() function which is compiled out if DEBUG_TIMING isn't present. This cleans up all the ugly ifdefs in the function logic.

---
 drivers/char/ipmi/ipmi_si_intf.c | 58 +++++++++++++++-------------------------
 1 file changed, 21 insertions(+), 37 deletions(-)
drivers/char/ipmi/ipmi_si_intf.c +21 -37
index 967b73a..cc3a07d 100644
@@ -321,6 +321,18 @@ static int try_smi_init(struct smi_info *smi);
 static void cleanup_one_si(struct smi_info *to_clean);
 static void cleanup_ipmi_si(void);
 
+#ifdef DEBUG_TIMING
+void debug_timestamp(char *msg)
+{
+	struct timeval t;
+
+	do_gettimeofday(&t);
+	pr_debug("**%s: %d.%9.9d\n", msg, t.tv_sec, t.tv_usec);
+}
+#else
+#define debug_timestamp(x)
+#endif
+
 static ATOMIC_NOTIFIER_HEAD(xaction_notifier_list);
 static int register_xaction_notifier(struct notifier_block *nb)
 {
@@ -370,10 +382,7 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info)
 
 		smi_info->curr_msg = smi_info->waiting_msg;
 		smi_info->waiting_msg = NULL;
-#ifdef DEBUG_TIMING
-		do_gettimeofday(&t);
-		printk(KERN_DEBUG "**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec);
-#endif
+		debug_timestamp("Start2");
 		err = atomic_notifier_call_chain(&xaction_notifier_list,
 				0, smi_info);
 		if (err & NOTIFY_STOP_MASK) {
@@ -582,12 +591,8 @@ static void check_bt_irq(struct smi_info *smi_info, bool irq_on)
 static void handle_transaction_done(struct smi_info *smi_info)
 {
 	struct ipmi_smi_msg *msg;
-#ifdef DEBUG_TIMING
-	struct timeval t;
 
-	do_gettimeofday(&t);
-	printk(KERN_DEBUG "**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec);
-#endif
+	debug_timestamp("Done");
 	switch (smi_info->si_state) {
 	case SI_NORMAL:
 		if (!smi_info->curr_msg)
@@ -929,17 +934,11 @@ static void sender(void                *send_info,
 	struct smi_info   *smi_info = send_info;
 	enum si_sm_result result;
 	unsigned long     flags;
-#ifdef DEBUG_TIMING
-	struct timeval    t;
-#endif
 
 	BUG_ON(smi_info->waiting_msg);
 	smi_info->waiting_msg = msg;
 
-#ifdef DEBUG_TIMING
-	do_gettimeofday(&t);
-	printk("**Enqueue: %d.%9.9d\n", t.tv_sec, t.tv_usec);
-#endif
+	debug_timestamp("Enqueue");
 
 	if (smi_info->run_to_completion) {
 		/*
@@ -1128,15 +1127,10 @@ static void smi_timeout(unsigned long data)
 	unsigned long     jiffies_now;
 	long              time_diff;
 	long		  timeout;
-#ifdef DEBUG_TIMING
-	struct timeval    t;
-#endif
 
 	spin_lock_irqsave(&(smi_info->si_lock), flags);
-#ifdef DEBUG_TIMING
-	do_gettimeofday(&t);
-	printk(KERN_DEBUG "**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec);
-#endif
+	debug_timestamp("Timer");
+
 	jiffies_now = jiffies;
 	time_diff = (((long)jiffies_now - (long)smi_info->last_timeout_jiffies)
 		     * SI_USEC_PER_JIFFY);
@@ -1173,18 +1167,13 @@ static irqreturn_t si_irq_handler(int irq, void *data)
 {
 	struct smi_info *smi_info = data;
 	unsigned long   flags;
-#ifdef DEBUG_TIMING
-	struct timeval  t;
-#endif
 
 	spin_lock_irqsave(&(smi_info->si_lock), flags);
 
 	smi_inc_stat(smi_info, interrupts);
 
-#ifdef DEBUG_TIMING
-	do_gettimeofday(&t);
-	printk(KERN_DEBUG "**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec);
-#endif
+	debug_timestamp("Interrupt");
+
 	smi_event_handler(smi_info, 0);
 	spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 	return IRQ_HANDLED;
@@ -2038,18 +2027,13 @@ static u32 ipmi_acpi_gpe(acpi_handle gpe_device,
 {
 	struct smi_info *smi_info = context;
 	unsigned long   flags;
-#ifdef DEBUG_TIMING
-	struct timeval t;
-#endif
 
 	spin_lock_irqsave(&(smi_info->si_lock), flags);
 
 	smi_inc_stat(smi_info, interrupts);
 
-#ifdef DEBUG_TIMING
-	do_gettimeofday(&t);
-	printk("**ACPI_GPE: %d.%9.9d\n", t.tv_sec, t.tv_usec);
-#endif
+	debug_timestamp("ACPI_GPE");
+
 	smi_event_handler(smi_info, 0);
 	spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 
Signature · 1 line
1.9.1
#1 lore raw

RFC PATCH 2/2 ipmi: Update timespec usage to timespec64

As part of the internal y2038 cleanup, this patch removes timespec usage in the ipmi driver, replacing it timespec64

---
 drivers/char/ipmi/ipmi_si_intf.c | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)
drivers/char/ipmi/ipmi_si_intf.c +13 -12
index cc3a07d..814ba98 100644
@@ -324,10 +324,10 @@ static void cleanup_ipmi_si(void);
 #ifdef DEBUG_TIMING
 void debug_timestamp(char *msg)
 {
-	struct timeval t;
+	struct timespec64 t;
 
-	do_gettimeofday(&t);
-	pr_debug("**%s: %d.%9.9d\n", msg, t.tv_sec, t.tv_usec);
+	do_getnstimeofday64(&t);
+	pr_debug("**%s: %lld.%9.9d\n", msg, (long long) t.tv_sec, t.tv_usec);
 }
 #else
 #define debug_timestamp(x)
@@ -988,18 +988,18 @@ static void set_run_to_completion(void *send_info, bool i_run_to_completion)
  * we are spinning in kipmid looking for something and not delaying
  * between checks
  */
-static inline void ipmi_si_set_not_busy(struct timespec *ts)
+static inline void ipmi_si_set_not_busy(struct timespec64 *ts)
 {
 	ts->tv_nsec = -1;
 }
-static inline int ipmi_si_is_busy(struct timespec *ts)
+static inline int ipmi_si_is_busy(struct timespec64 *ts)
 {
 	return ts->tv_nsec != -1;
 }
 
 static inline int ipmi_thread_busy_wait(enum si_sm_result smi_result,
 					const struct smi_info *smi_info,
-					struct timespec *busy_until)
+					struct timespec64 *busy_until)
 {
 	unsigned int max_busy_us = 0;
 
@@ -1008,12 +1008,13 @@ static inline int ipmi_thread_busy_wait(enum si_sm_result smi_result,
 	if (max_busy_us == 0 || smi_result != SI_SM_CALL_WITH_DELAY)
 		ipmi_si_set_not_busy(busy_until);
 	else if (!ipmi_si_is_busy(busy_until)) {
-		getnstimeofday(busy_until);
-		timespec_add_ns(busy_until, max_busy_us*NSEC_PER_USEC);
+		getnstimeofday64(busy_until);
+		timespec64_add_ns(busy_until, max_busy_us*NSEC_PER_USEC);
 	} else {
-		struct timespec now;
-		getnstimeofday(&now);
-		if (unlikely(timespec_compare(&now, busy_until) > 0)) {
+		struct timespec64 now;
+
+		getnstimeofday64(&now);
+		if (unlikely(timespec64_compare(&now, busy_until) > 0)) {
 			ipmi_si_set_not_busy(busy_until);
 			return 0;
 		}
@@ -1036,7 +1037,7 @@ static int ipmi_thread(void *data)
 	struct smi_info *smi_info = data;
 	unsigned long flags;
 	enum si_sm_result smi_result;
-	struct timespec busy_until;
+	struct timespec64 busy_until;
 
 	ipmi_si_set_not_busy(&busy_until);
 	set_user_nice(current, MAX_NICE);
Signature · 1 line
1.9.1
#2 lore raw

Re: [PATCH 2/2][RFC] ipmi: Update timespec usage to timespec64

Quoted 8 lines · On Wednesday 07 January 2015 12:51:50 John Stultz wrote:

As part of the internal y2038 cleanup, this patch removes timespec usage in the ipmi driver, replacing it timespec64

In other drivers, we tended to use ktime_t and monotonic time, but your approach is definitely simpler because it doesn't have to rework the ipmi_si_is_busy logic and just do a s/timespec/timespec64/ conversion.

Do you think it makes sense to use ktime_get_ts64 instead of getnstimeofday64 to get a monotonic time? The advantage would be to have the code work slightly better when racing against settimeofday, the downside would be that the debug printk shows the changed time base, but that would hopefully be irrelevant to someone debugging the code.

Arnd

#3 lore raw

Re: [PATCH 2/2][RFC] ipmi: Update timespec usage to timespec64

Quoted 15 lines · Arnd Bergmann
Quoted 8 lines · On Wednesday 07 January 2015 12:51:50 John Stultz wrote:

As part of the internal y2038 cleanup, this patch removes timespec usage in the ipmi driver, replacing it timespec64

In other drivers, we tended to use ktime_t and monotonic time, but your approach is definitely simpler because it doesn't have to rework the ipmi_si_is_busy logic and just do a s/timespec/timespec64/ conversion.

Quoted 6 lines

Do you think it makes sense to use ktime_get_ts64 instead of getnstimeofday64 to get a monotonic time? The advantage would be to have the code work slightly better when racing against settimeofday, the downside would be that the debug printk shows the changed time base, but that would hopefully be irrelevant to someone debugging the code.

So here they were explicitly printing wall-time in sec/usec, so I was somewhat hoping not to create any major behavioral changes.

But looking at this again, I see I sent a stale patch which has a build bug (using tv_usec w/ a timespec64)... so let me redo this anyway.

thanks
-john

#4 lore raw

PATCH v2 1/2 ipmi: Cleanup DEBUG_TIMING ifdef usage

In reply to John Stultz

The driver uses #ifdef DEBUG_TIMING in order to conditionally print out timestamped debug messages. Unfortunately it adds the ifdefs all over the usage sites.

This patch cleans it up by adding a debug_timestamp() function which is compiled out if DEBUG_TIMING isn't present. This cleans up all the ugly ifdefs in the function logic.

---
v2: Caught a missed DEBUG_TIMING ifdef

 drivers/char/ipmi/ipmi_si_intf.c | 61 ++++++++++++++--------------------------
 1 file changed, 21 insertions(+), 40 deletions(-)
drivers/char/ipmi/ipmi_si_intf.c +21 -40
index 967b73a..e54c02b 100644
@@ -321,6 +321,18 @@ static int try_smi_init(struct smi_info *smi);
 static void cleanup_one_si(struct smi_info *to_clean);
 static void cleanup_ipmi_si(void);
 
+#ifdef DEBUG_TIMING
+void debug_timestamp(char *msg)
+{
+	struct timeval t;
+
+	do_gettimeofday(&t);
+	pr_debug("**%s: %d.%9.9d\n", msg, t.tv_sec, t.tv_usec);
+}
+#else
+#define debug_timestamp(x)
+#endif
+
 static ATOMIC_NOTIFIER_HEAD(xaction_notifier_list);
 static int register_xaction_notifier(struct notifier_block *nb)
 {
@@ -358,9 +370,6 @@ static void return_hosed_msg(struct smi_info *smi_info, int cCode)
 static enum si_sm_result start_next_msg(struct smi_info *smi_info)
 {
 	int              rv;
-#ifdef DEBUG_TIMING
-	struct timeval t;
-#endif
 
 	if (!smi_info->waiting_msg) {
 		smi_info->curr_msg = NULL;
@@ -370,10 +379,7 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info)
 
 		smi_info->curr_msg = smi_info->waiting_msg;
 		smi_info->waiting_msg = NULL;
-#ifdef DEBUG_TIMING
-		do_gettimeofday(&t);
-		printk(KERN_DEBUG "**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec);
-#endif
+		debug_timestamp("Start2");
 		err = atomic_notifier_call_chain(&xaction_notifier_list,
 				0, smi_info);
 		if (err & NOTIFY_STOP_MASK) {
@@ -582,12 +588,8 @@ static void check_bt_irq(struct smi_info *smi_info, bool irq_on)
 static void handle_transaction_done(struct smi_info *smi_info)
 {
 	struct ipmi_smi_msg *msg;
-#ifdef DEBUG_TIMING
-	struct timeval t;
 
-	do_gettimeofday(&t);
-	printk(KERN_DEBUG "**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec);
-#endif
+	debug_timestamp("Done");
 	switch (smi_info->si_state) {
 	case SI_NORMAL:
 		if (!smi_info->curr_msg)
@@ -929,17 +931,11 @@ static void sender(void                *send_info,
 	struct smi_info   *smi_info = send_info;
 	enum si_sm_result result;
 	unsigned long     flags;
-#ifdef DEBUG_TIMING
-	struct timeval    t;
-#endif
 
 	BUG_ON(smi_info->waiting_msg);
 	smi_info->waiting_msg = msg;
 
-#ifdef DEBUG_TIMING
-	do_gettimeofday(&t);
-	printk("**Enqueue: %d.%9.9d\n", t.tv_sec, t.tv_usec);
-#endif
+	debug_timestamp("Enqueue");
 
 	if (smi_info->run_to_completion) {
 		/*
@@ -1128,15 +1124,10 @@ static void smi_timeout(unsigned long data)
 	unsigned long     jiffies_now;
 	long              time_diff;
 	long		  timeout;
-#ifdef DEBUG_TIMING
-	struct timeval    t;
-#endif
 
 	spin_lock_irqsave(&(smi_info->si_lock), flags);
-#ifdef DEBUG_TIMING
-	do_gettimeofday(&t);
-	printk(KERN_DEBUG "**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec);
-#endif
+	debug_timestamp("Timer");
+
 	jiffies_now = jiffies;
 	time_diff = (((long)jiffies_now - (long)smi_info->last_timeout_jiffies)
 		     * SI_USEC_PER_JIFFY);
@@ -1173,18 +1164,13 @@ static irqreturn_t si_irq_handler(int irq, void *data)
 {
 	struct smi_info *smi_info = data;
 	unsigned long   flags;
-#ifdef DEBUG_TIMING
-	struct timeval  t;
-#endif
 
 	spin_lock_irqsave(&(smi_info->si_lock), flags);
 
 	smi_inc_stat(smi_info, interrupts);
 
-#ifdef DEBUG_TIMING
-	do_gettimeofday(&t);
-	printk(KERN_DEBUG "**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec);
-#endif
+	debug_timestamp("Interrupt");
+
 	smi_event_handler(smi_info, 0);
 	spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 	return IRQ_HANDLED;
@@ -2038,18 +2024,13 @@ static u32 ipmi_acpi_gpe(acpi_handle gpe_device,
 {
 	struct smi_info *smi_info = context;
 	unsigned long   flags;
-#ifdef DEBUG_TIMING
-	struct timeval t;
-#endif
 
 	spin_lock_irqsave(&(smi_info->si_lock), flags);
 
 	smi_inc_stat(smi_info, interrupts);
 
-#ifdef DEBUG_TIMING
-	do_gettimeofday(&t);
-	printk("**ACPI_GPE: %d.%9.9d\n", t.tv_sec, t.tv_usec);
-#endif
+	debug_timestamp("ACPI_GPE");
+
 	smi_event_handler(smi_info, 0);
 	spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 
Signature · 1 line
1.9.1
#5 lore raw

PATCH v2 2/2 ipmi: Update timespec usage to timespec64

As part of the internal y2038 cleanup, this patch removes timespec usage in the ipmi driver, replacing it timespec64

---
v2: Include build fixes I mistakenly left out of v1

 drivers/char/ipmi/ipmi_si_intf.c | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)
drivers/char/ipmi/ipmi_si_intf.c +13 -12
index e54c02b..9db736a 100644
@@ -324,10 +324,10 @@ static void cleanup_ipmi_si(void);
 #ifdef DEBUG_TIMING
 void debug_timestamp(char *msg)
 {
-	struct timeval t;
+	struct timespec64 t;
 
-	do_gettimeofday(&t);
-	pr_debug("**%s: %d.%9.9d\n", msg, t.tv_sec, t.tv_usec);
+	getnstimeofday64(&t);
+	pr_debug("**%s: %lld.%9.9ld\n", msg, (long long) t.tv_sec, t.tv_nsec);
 }
 #else
 #define debug_timestamp(x)
@@ -985,18 +985,18 @@ static void set_run_to_completion(void *send_info, bool i_run_to_completion)
  * we are spinning in kipmid looking for something and not delaying
  * between checks
  */
-static inline void ipmi_si_set_not_busy(struct timespec *ts)
+static inline void ipmi_si_set_not_busy(struct timespec64 *ts)
 {
 	ts->tv_nsec = -1;
 }
-static inline int ipmi_si_is_busy(struct timespec *ts)
+static inline int ipmi_si_is_busy(struct timespec64 *ts)
 {
 	return ts->tv_nsec != -1;
 }
 
 static inline int ipmi_thread_busy_wait(enum si_sm_result smi_result,
 					const struct smi_info *smi_info,
-					struct timespec *busy_until)
+					struct timespec64 *busy_until)
 {
 	unsigned int max_busy_us = 0;
 
@@ -1005,12 +1005,13 @@ static inline int ipmi_thread_busy_wait(enum si_sm_result smi_result,
 	if (max_busy_us == 0 || smi_result != SI_SM_CALL_WITH_DELAY)
 		ipmi_si_set_not_busy(busy_until);
 	else if (!ipmi_si_is_busy(busy_until)) {
-		getnstimeofday(busy_until);
-		timespec_add_ns(busy_until, max_busy_us*NSEC_PER_USEC);
+		getnstimeofday64(busy_until);
+		timespec64_add_ns(busy_until, max_busy_us*NSEC_PER_USEC);
 	} else {
-		struct timespec now;
-		getnstimeofday(&now);
-		if (unlikely(timespec_compare(&now, busy_until) > 0)) {
+		struct timespec64 now;
+
+		getnstimeofday64(&now);
+		if (unlikely(timespec64_compare(&now, busy_until) > 0)) {
 			ipmi_si_set_not_busy(busy_until);
 			return 0;
 		}
@@ -1033,7 +1034,7 @@ static int ipmi_thread(void *data)
 	struct smi_info *smi_info = data;
 	unsigned long flags;
 	enum si_sm_result smi_result;
-	struct timespec busy_until;
+	struct timespec64 busy_until;
 
 	ipmi_si_set_not_busy(&busy_until);
 	set_user_nice(current, MAX_NICE);
Signature · 1 line
1.9.1
#6 lore raw
In reply to John Stultz
Quoted 7 lines · John Stultz

The driver uses #ifdef DEBUG_TIMING in order to conditionally print out timestamped debug messages. Unfortunately it adds the ifdefs all over the usage sites.

This patch cleans it up by adding a debug_timestamp() function which is compiled out if DEBUG_TIMING isn't present. This cleans up all the ugly ifdefs in the function logic.

Yes, this is much better. I had looked at this recently and planned to do something
with it. Queued for 3.20, unless you need it sooner.

Thanks,

-corey

Quoted 149 lines

---
v2: Caught a missed DEBUG_TIMING ifdef

 drivers/char/ipmi/ipmi_si_intf.c | 61 ++++++++++++++--------------------------
 1 file changed, 21 insertions(+), 40 deletions(-)
drivers/char/ipmi/ipmi_si_intf.c +21 -40
index 967b73a..e54c02b 100644
@@ -321,6 +321,18 @@ static int try_smi_init(struct smi_info *smi);
 static void cleanup_one_si(struct smi_info *to_clean);
 static void cleanup_ipmi_si(void);
 
+#ifdef DEBUG_TIMING
+void debug_timestamp(char *msg)
+{
+	struct timeval t;
+
+	do_gettimeofday(&t);
+	pr_debug("**%s: %d.%9.9d\n", msg, t.tv_sec, t.tv_usec);
+}
+#else
+#define debug_timestamp(x)
+#endif
+
 static ATOMIC_NOTIFIER_HEAD(xaction_notifier_list);
 static int register_xaction_notifier(struct notifier_block *nb)
 {
@@ -358,9 +370,6 @@ static void return_hosed_msg(struct smi_info *smi_info, int cCode)
 static enum si_sm_result start_next_msg(struct smi_info *smi_info)
 {
 	int              rv;
-#ifdef DEBUG_TIMING
-	struct timeval t;
-#endif
 
 	if (!smi_info->waiting_msg) {
 		smi_info->curr_msg = NULL;
@@ -370,10 +379,7 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info)
 
 		smi_info->curr_msg = smi_info->waiting_msg;
 		smi_info->waiting_msg = NULL;
-#ifdef DEBUG_TIMING
-		do_gettimeofday(&t);
-		printk(KERN_DEBUG "**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec);
-#endif
+		debug_timestamp("Start2");
 		err = atomic_notifier_call_chain(&xaction_notifier_list,
 				0, smi_info);
 		if (err & NOTIFY_STOP_MASK) {
@@ -582,12 +588,8 @@ static void check_bt_irq(struct smi_info *smi_info, bool irq_on)
 static void handle_transaction_done(struct smi_info *smi_info)
 {
 	struct ipmi_smi_msg *msg;
-#ifdef DEBUG_TIMING
-	struct timeval t;
 
-	do_gettimeofday(&t);
-	printk(KERN_DEBUG "**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec);
-#endif
+	debug_timestamp("Done");
 	switch (smi_info->si_state) {
 	case SI_NORMAL:
 		if (!smi_info->curr_msg)
@@ -929,17 +931,11 @@ static void sender(void                *send_info,
 	struct smi_info   *smi_info = send_info;
 	enum si_sm_result result;
 	unsigned long     flags;
-#ifdef DEBUG_TIMING
-	struct timeval    t;
-#endif
 
 	BUG_ON(smi_info->waiting_msg);
 	smi_info->waiting_msg = msg;
 
-#ifdef DEBUG_TIMING
-	do_gettimeofday(&t);
-	printk("**Enqueue: %d.%9.9d\n", t.tv_sec, t.tv_usec);
-#endif
+	debug_timestamp("Enqueue");
 
 	if (smi_info->run_to_completion) {
 		/*
@@ -1128,15 +1124,10 @@ static void smi_timeout(unsigned long data)
 	unsigned long     jiffies_now;
 	long              time_diff;
 	long		  timeout;
-#ifdef DEBUG_TIMING
-	struct timeval    t;
-#endif
 
 	spin_lock_irqsave(&(smi_info->si_lock), flags);
-#ifdef DEBUG_TIMING
-	do_gettimeofday(&t);
-	printk(KERN_DEBUG "**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec);
-#endif
+	debug_timestamp("Timer");
+
 	jiffies_now = jiffies;
 	time_diff = (((long)jiffies_now - (long)smi_info->last_timeout_jiffies)
 		     * SI_USEC_PER_JIFFY);
@@ -1173,18 +1164,13 @@ static irqreturn_t si_irq_handler(int irq, void *data)
 {
 	struct smi_info *smi_info = data;
 	unsigned long   flags;
-#ifdef DEBUG_TIMING
-	struct timeval  t;
-#endif
 
 	spin_lock_irqsave(&(smi_info->si_lock), flags);
 
 	smi_inc_stat(smi_info, interrupts);
 
-#ifdef DEBUG_TIMING
-	do_gettimeofday(&t);
-	printk(KERN_DEBUG "**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec);
-#endif
+	debug_timestamp("Interrupt");
+
 	smi_event_handler(smi_info, 0);
 	spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 	return IRQ_HANDLED;
@@ -2038,18 +2024,13 @@ static u32 ipmi_acpi_gpe(acpi_handle gpe_device,
 {
 	struct smi_info *smi_info = context;
 	unsigned long   flags;
-#ifdef DEBUG_TIMING
-	struct timeval t;
-#endif
 
 	spin_lock_irqsave(&(smi_info->si_lock), flags);
 
 	smi_inc_stat(smi_info, interrupts);
 
-#ifdef DEBUG_TIMING
-	do_gettimeofday(&t);
-	printk("**ACPI_GPE: %d.%9.9d\n", t.tv_sec, t.tv_usec);
-#endif
+	debug_timestamp("ACPI_GPE");
+
 	smi_event_handler(smi_info, 0);
 	spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 
#7 lore raw
Quoted 5 lines · Corey Minyard
Quoted 4 lines · John Stultz

The driver uses #ifdef DEBUG_TIMING in order to conditionally print out timestamped debug messages. Unfortunately it adds the ifdefs all over the usage sites.

Quoted 7 lines
Quoted 3 lines

This patch cleans it up by adding a debug_timestamp() function which is compiled out if DEBUG_TIMING isn't present. This cleans up all the ugly ifdefs in the function logic.

Yes, this is much better. I had looked at this recently and planned to do something
with it. Queued for 3.20, unless you need it sooner.

Nope, no rush. Just wanted to make sure it gets off my queue. :)

thanks
-john