drm/panel: Add support for AUO b101ean01 panel
Subsystems (3)
PATCH v3 1/1 drm/panel: Add support for AUO b101ean01 panel
The AUO b101ean01 panel is a 10.1" 1280x800 panel, which can be supported by the simple panel driver.
---
Changes in v3:
- changed moving auo_b101ean01 definitions under auo_b101aw03
drivers/gpu/drm/panel/panel-simple.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
drivers/gpu/drm/panel/panel-simple.c +26 -0
@@ -345,6 +345,29 @@ static const struct panel_desc auo_b101aw03 = { }, }; +static const struct drm_display_mode auo_b101ean01_mode = { + .clock =72500 , + .hdisplay =1280 , + .hsync_start =1280 +147 , + .hsync_end =1280 +147 +32 , + .htotal =1280 +147 +32 +21 , + .vdisplay =800 , + .vsync_start =800 +4 , + .vsync_end =800 +4 +4 , + .vtotal =800 +4 +4 +8 , + .vrefresh =60 , +}; + +static const struct panel_desc auo_b101ean01 = { + .modes = &auo_b101ean01_mode, + .num_modes =1 , + .bpc =6 , + .size = { + .width =217 , + .height =136 , + }, +}; +static const struct drm_display_mode auo_b101xtn01_mode = { .clock =72000 , .hdisplay =1366 ,
@@ -727,6 +750,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "auo,b101aw03", .data = &auo_b101aw03, }, { + .compatible = "auo,b101ean01", + .data = &auo_b101ean01, + }, { .compatible = "auo,b101xtn01", .data = &auo_b101xtn01, }, {
Signature · 1 line
1.9.1
Quoted 4 lines · huang lin
The AUO b101ean01 panel is a 10.1" 1280x800 panel, which can be supported by the simple panel driver.
Signed-off-by huang lin <[email protected]>
Quoted 57 lines
---
Changes in v3:
- changed movingauo_b101ean01definitions underauo_b101aw03drivers/gpu/drm/panel/panel-simple.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)drivers/gpu/drm/panel/panel-simple.c +26
-1@@ -345,6 +345,29 @@ static const struct panel_desc auo_b101aw03 = { }, }; +static const struct drm_display_mode auo_b101ean01_mode = { + .clock =72500 , + .hdisplay =1280 , + .hsync_start =1280 +147 , + .hsync_end =1280 +147 +32 , + .htotal =1280 +147 +32 +21 , + .vdisplay =800 , + .vsync_start =800 +4 , + .vsync_end =800 +4 +4 , + .vtotal =800 +4 +4 +8 , + .vrefresh =60 , +}; + +static const struct panel_desc auo_b101ean01 = { + .modes = &auo_b101ean01_mode, + .num_modes =1 , + .bpc =6 , + .size = { + .width =217 , + .height =136 , + }, +}; +static const struct drm_display_mode auo_b101xtn01_mode = { .clock =72000 , .hdisplay =1366 ,@@ -727,6 +750,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "auo,b101aw03", .data = &auo_b101aw03, }, { + .compatible = "auo,b101ean01", + .data = &auo_b101ean01, + }, { .compatible = "auo,b101xtn01", .data = &auo_b101xtn01, }, { --1.9.1
Quoted 7 lines · Daniel Kurtz
Quoted 4 lines · huang lin
The AUO b101ean01 panel is a 10.1" 1280x800 panel, which can be supported by the simple panel driver.
Signed-off-by huang lin <[email protected]>
Thierry is going to point out that this patch is missing devicetree documentation, so I'll beat him to the punch :-).
Please add an "auo,b101ean01" entry to:
Documentation/devicetree/bindings/panel/
With the above documentation this is:
Quoted 50 lines
Quoted 50 lines
---
Changes in v3:
- changed movingauo_b101ean01definitions underauo_b101aw03drivers/gpu/drm/panel/panel-simple.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)drivers/gpu/drm/panel/panel-simple.c +25
-0@@ -345,6 +345,29 @@ static const struct panel_desc auo_b101aw03 = { }, }; +static const struct drm_display_mode auo_b101ean01_mode = { + .clock =72500 , + .hdisplay =1280 , + .hsync_start =1280 +147 , + .hsync_end =1280 +147 +32 , + .htotal =1280 +147 +32 +21 , + .vdisplay =800 , + .vsync_start =800 +4 , + .vsync_end =800 +4 +4 , + .vtotal =800 +4 +4 +8 , + .vrefresh =60 , +}; + +static const struct panel_desc auo_b101ean01 = { + .modes = &auo_b101ean01_mode, + .num_modes =1 , + .bpc =6 , + .size = { + .width =217 , + .height =136 , + }, +}; +static const struct drm_display_mode auo_b101xtn01_mode = { .clock =72000 , .hdisplay =1366 ,@@ -727,6 +750,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "auo,b101aw03", .data = &auo_b101aw03, }, { + .compatible = "auo,b101ean01", + .data = &auo_b101ean01,
Quoted 8 lines
Quoted 8 lines
drivers/gpu/drm/panel/panel-simple.c +1
-1+ }, { .compatible = "auo,b101xtn01", .data = &auo_b101xtn01, }, { --1.9.1
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel