Skip to contentSkip to conversation

toshiba_acpi: Add support for USB Sleep functions

PATCH Applied Azael Avalos 3 participants 9 messages Jan 19, 2015 – Jan 21, 2015

Subsystems (2)
lore
Share & tools
lore

Azael Avalos

author maintainer
#0 lore raw

v2 cover toshiba_acpi: Add support for USB Sleep functions

The following patches add support to several USB Sleep functions found on newer Toshiba laptops, allowing to use the USB ports while the laptop is asleep or turned off.

Changes since v1:
- Changed accepted parameters on first patch and added a short description of what the auto and alternate charging modes mean
- Some misc format and typo changes

Azael Avalos (4):
toshiba_acpi: Add support for USB Sleep and Charge function
toshiba_acpi: Add support for USB Sleep functions under battery
toshiba_acpi: Add support for USB Rapid Charge
toshiba_acpi: Add support for USB Sleep and Music

 drivers/platform/x86/toshiba_acpi.c | 455 ++++++++++++++++++++++++++++++++++++
 1 file changed, 455 insertions(+)
Signature · 1 line
2.2.1
author maintainer
#1 lore raw

PATCH v2 1/4 toshiba_acpi: Add support for USB Sleep and Charge function

Newer Toshiba models now come with a feature called Sleep and Charge, where the computer USB ports remain powered when the computer is asleep or turned off.

This patch adds support to such feature, creating a sysfs entry called "usb_sleep_charge" to set the desired charging mode or to disable it.

The sysfs entry accepts three parameters, 0, 1 and 2, beign disabled, alternate and auto respectively.

The auto mode stands for USB conformant devices (which most are), and the alternate mode stands for those non USB conformant devices that require more power.

---
 drivers/platform/x86/toshiba_acpi.c | 118 ++++++++++++++++++++++++++++++++++++
 1 file changed, 118 insertions(+)
drivers/platform/x86/toshiba_acpi.c +118 -0
index 71ac7c12..cf2faca 100644
@@ -122,6 +122,7 @@ MODULE_LICENSE("GPL");
 #define HCI_ECO_MODE			0x0097
 #define HCI_ACCELEROMETER2		0x00a6
 #define SCI_ILLUMINATION		0x014e
+#define SCI_USB_SLEEP_CHARGE		0x0150
 #define SCI_KBD_ILLUM_STATUS		0x015c
 #define SCI_TOUCHPAD			0x050e
 
@@ -146,6 +147,10 @@ MODULE_LICENSE("GPL");
 #define SCI_KBD_MODE_ON			0x8
 #define SCI_KBD_MODE_OFF		0x10
 #define SCI_KBD_TIME_MAX		0x3c001a
+#define SCI_USB_CHARGE_MODE_MASK	0xff
+#define SCI_USB_CHARGE_DISABLED		0x30000
+#define SCI_USB_CHARGE_ALTERNATE	0x30009
+#define SCI_USB_CHARGE_AUTO		0x30021
 
 struct toshiba_acpi_dev {
 	struct acpi_device *acpi_dev;
@@ -177,6 +182,7 @@ struct toshiba_acpi_dev {
 	unsigned int touchpad_supported:1;
 	unsigned int eco_supported:1;
 	unsigned int accelerometer_supported:1;
+	unsigned int usb_sleep_charge_supported:1;
 	unsigned int sysfs_created:1;
 
 	struct mutex mutex;
@@ -761,6 +767,53 @@ static int toshiba_accelerometer_get(struct toshiba_acpi_dev *dev,
 	return 0;
 }
 
+/* Sleep (Charge and Music) utilities support */
+static int toshiba_usb_sleep_charge_get(struct toshiba_acpi_dev *dev,
+					u32 *mode)
+{
+	u32 result;
+
+	if (!sci_open(dev))
+		return -EIO;
+
+	result = sci_read(dev, SCI_USB_SLEEP_CHARGE, mode);
+	sci_close(dev);
+	if (result == TOS_FAILURE) {
+		pr_err("ACPI call to set USB S&C mode failed\n");
+		return -EIO;
+	} else if (result == TOS_NOT_SUPPORTED) {
+		pr_info("USB Sleep and Charge not supported\n");
+		return -ENODEV;
+	} else if (result == TOS_INPUT_DATA_ERROR) {
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int toshiba_usb_sleep_charge_set(struct toshiba_acpi_dev *dev,
+					u32 mode)
+{
+	u32 result;
+
+	if (!sci_open(dev))
+		return -EIO;
+
+	result = sci_write(dev, SCI_USB_SLEEP_CHARGE, mode);
+	sci_close(dev);
+	if (result == TOS_FAILURE) {
+		pr_err("ACPI call to set USB S&C mode failed\n");
+		return -EIO;
+	} else if (result == TOS_NOT_SUPPORTED) {
+		pr_info("USB Sleep and Charge not supported\n");
+		return -ENODEV;
+	} else if (result == TOS_INPUT_DATA_ERROR) {
+		return -EIO;
+	}
+
+	return 0;
+}
+
 /* Bluetooth rfkill handlers */
 
 static u32 hci_get_bt_present(struct toshiba_acpi_dev *dev, bool *present)
@@ -1314,6 +1367,12 @@ static ssize_t toshiba_touchpad_show(struct device *dev,
 static ssize_t toshiba_position_show(struct device *dev,
 				     struct device_attribute *attr,
 				     char *buf);
+static ssize_t toshiba_usb_sleep_charge_show(struct device *dev,
+					     struct device_attribute *attr,
+					     char *buf);
+static ssize_t toshiba_usb_sleep_charge_store(struct device *dev,
+					      struct device_attribute *attr,
+					      const char *buf, size_t count);
 
 static DEVICE_ATTR(kbd_backlight_mode, S_IRUGO | S_IWUSR,
 		   toshiba_kbd_bl_mode_show, toshiba_kbd_bl_mode_store);
@@ -1325,6 +1384,9 @@ static DEVICE_ATTR(kbd_backlight_timeout, S_IRUGO | S_IWUSR,
 static DEVICE_ATTR(touchpad, S_IRUGO | S_IWUSR,
 		   toshiba_touchpad_show, toshiba_touchpad_store);
 static DEVICE_ATTR(position, S_IRUGO, toshiba_position_show, NULL);
+static DEVICE_ATTR(usb_sleep_charge, S_IRUGO | S_IWUSR,
+		   toshiba_usb_sleep_charge_show,
+		   toshiba_usb_sleep_charge_store);
 
 static struct attribute *toshiba_attributes[] = {
 	&dev_attr_kbd_backlight_mode.attr,
@@ -1333,6 +1395,7 @@ static struct attribute *toshiba_attributes[] = {
 	&dev_attr_kbd_backlight_timeout.attr,
 	&dev_attr_touchpad.attr,
 	&dev_attr_position.attr,
+	&dev_attr_usb_sleep_charge.attr,
 	NULL,
 };
 
@@ -1550,6 +1613,56 @@ static ssize_t toshiba_position_show(struct device *dev,
 	return sprintf(buf, "%d %d %d\n", x, y, z);
 }
 
+static ssize_t toshiba_usb_sleep_charge_show(struct device *dev,
+					     struct device_attribute *attr,
+					     char *buf)
+{
+	struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
+	u32 mode;
+	int ret;
+
+	ret = toshiba_usb_sleep_charge_get(toshiba, &mode);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%x\n", mode & SCI_USB_CHARGE_MODE_MASK);
+}
+
+static ssize_t toshiba_usb_sleep_charge_store(struct device *dev,
+					      struct device_attribute *attr,
+					      const char *buf, size_t count)
+{
+	struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
+	u32 mode;
+	int state;
+	int ret;
+
+	ret = kstrtoint(buf, 0, &state);
+	if (ret)
+		return ret;
+	/* Check for supported values, where:
+	 * 0 - Disabled
+	 * 1 - Alternate (Non USB conformant devices that require more power)
+	 * 2 - Auto (USB conformant devices)
+	 */
+	if (state != 0 && state != 1 && state != 2)
+		return -EINVAL;
+
+	/* Set the USB charging mode to internal value */
+	if (state == 0)
+		mode = SCI_USB_CHARGE_DISABLED;
+	else if (state == 1)
+		mode = SCI_USB_CHARGE_ALTERNATE;
+	else if (state == 2)
+		mode = SCI_USB_CHARGE_AUTO;
+
+	ret = toshiba_usb_sleep_charge_set(toshiba, mode);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
 static umode_t toshiba_sysfs_is_visible(struct kobject *kobj,
 					struct attribute *attr, int idx)
 {
@@ -1565,6 +1678,8 @@ static umode_t toshiba_sysfs_is_visible(struct kobject *kobj,
 		exists = (drv->touchpad_supported) ? true : false;
 	else if (attr == &dev_attr_position.attr)
 		exists = (drv->accelerometer_supported) ? true : false;
+	else if (attr == &dev_attr_usb_sleep_charge.attr)
+		exists = (drv->usb_sleep_charge_supported) ? true : false;
 
 	return exists ? attr->mode : 0;
 }
@@ -1974,6 +2089,9 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
 	ret = toshiba_accelerometer_supported(dev);
 	dev->accelerometer_supported = !ret;
 
+	ret = toshiba_usb_sleep_charge_get(dev, &dummy);
+	dev->usb_sleep_charge_supported = !ret;
+
 	/* Determine whether or not BIOS supports fan and video interfaces */
 
 	ret = get_video_status(dev, &dummy);
Signature · 1 line
2.2.1
author maintainer
#2 lore raw

PATCH v2 2/4 toshiba_acpi: Add support for USB Sleep functions under battery

In reply to Azael Avalos

Toshiba laptops supporting USB Sleep and Charge also come with a feature called "USB functions under battery", which what it does when enabled, is allows the USB Sleep functions when the computer is under battery power.

This patch adds support to that function, creating a sysfs entry named "sleep_functions_on_battery", accepting values from 0-100, where zero disables the function and 1-100 sets the battery level at which point the USB Sleep functions will be disabled, and printing the current state of the functon and also the battery level currently set.

---
 drivers/platform/x86/toshiba_acpi.c | 133 ++++++++++++++++++++++++++++++++++++
 1 file changed, 133 insertions(+)
drivers/platform/x86/toshiba_acpi.c +133 -0
index cf2faca..3b6e952 100644
@@ -151,6 +151,10 @@ MODULE_LICENSE("GPL");
 #define SCI_USB_CHARGE_DISABLED		0x30000
 #define SCI_USB_CHARGE_ALTERNATE	0x30009
 #define SCI_USB_CHARGE_AUTO		0x30021
+#define SCI_USB_CHARGE_BAT_MASK		0x7
+#define SCI_USB_CHARGE_BAT_LVL_OFF	0x1
+#define SCI_USB_CHARGE_BAT_LVL_ON	0x4
+#define SCI_USB_CHARGE_BAT_LVL		0x0200
 
 struct toshiba_acpi_dev {
 	struct acpi_device *acpi_dev;
@@ -169,6 +173,7 @@ struct toshiba_acpi_dev {
 	int kbd_type;
 	int kbd_mode;
 	int kbd_time;
+	int usbsc_bat_level;
 
 	unsigned int illumination_supported:1;
 	unsigned int video_supported:1;
@@ -814,6 +819,61 @@ static int toshiba_usb_sleep_charge_set(struct toshiba_acpi_dev *dev,
 	return 0;
 }
 
+static int toshiba_sleep_functions_status_get(struct toshiba_acpi_dev *dev,
+					      u32 *mode)
+{
+	u32 in[TCI_WORDS] = { SCI_GET, SCI_USB_SLEEP_CHARGE, 0, 0, 0, 0 };
+	u32 out[TCI_WORDS];
+	acpi_status status;
+
+	if (!sci_open(dev))
+		return -EIO;
+
+	in[5] = SCI_USB_CHARGE_BAT_LVL;
+	status = tci_raw(dev, in, out);
+	sci_close(dev);
+	if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+		pr_err("ACPI call to get USB S&C battery level failed\n");
+		return -EIO;
+	} else if (out[0] == TOS_NOT_SUPPORTED) {
+		pr_info("USB Sleep and Charge not supported\n");
+		return -ENODEV;
+	} else if (out[0] == TOS_INPUT_DATA_ERROR) {
+		return -EIO;
+	}
+
+	*mode = out[2];
+
+	return 0;
+}
+
+static int toshiba_sleep_functions_status_set(struct toshiba_acpi_dev *dev,
+					      u32 mode)
+{
+	u32 in[TCI_WORDS] = { SCI_SET, SCI_USB_SLEEP_CHARGE, 0, 0, 0, 0 };
+	u32 out[TCI_WORDS];
+	acpi_status status;
+
+	if (!sci_open(dev))
+		return -EIO;
+
+	in[2] = mode;
+	in[5] = SCI_USB_CHARGE_BAT_LVL;
+	status = tci_raw(dev, in, out);
+	sci_close(dev);
+	if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+		pr_err("ACPI call to set USB S&C battery level failed\n");
+		return -EIO;
+	} else if (out[0] == TOS_NOT_SUPPORTED) {
+		pr_info("USB Sleep and Charge not supported\n");
+		return -ENODEV;
+	} else if (out[0] == TOS_INPUT_DATA_ERROR) {
+		return -EIO;
+	}
+
+	return 0;
+}
+
 /* Bluetooth rfkill handlers */
 
 static u32 hci_get_bt_present(struct toshiba_acpi_dev *dev, bool *present)
@@ -1373,6 +1433,12 @@ static ssize_t toshiba_usb_sleep_charge_show(struct device *dev,
 static ssize_t toshiba_usb_sleep_charge_store(struct device *dev,
 					      struct device_attribute *attr,
 					      const char *buf, size_t count);
+static ssize_t sleep_functions_on_battery_show(struct device *dev,
+					       struct device_attribute *attr,
+					       char *buf);
+static ssize_t sleep_functions_on_battery_store(struct device *dev,
+						struct device_attribute *attr,
+						const char *buf, size_t count);
 
 static DEVICE_ATTR(kbd_backlight_mode, S_IRUGO | S_IWUSR,
 		   toshiba_kbd_bl_mode_show, toshiba_kbd_bl_mode_store);
@@ -1387,6 +1453,9 @@ static DEVICE_ATTR(position, S_IRUGO, toshiba_position_show, NULL);
 static DEVICE_ATTR(usb_sleep_charge, S_IRUGO | S_IWUSR,
 		   toshiba_usb_sleep_charge_show,
 		   toshiba_usb_sleep_charge_store);
+static DEVICE_ATTR(sleep_functions_on_battery, S_IRUGO | S_IWUSR,
+		   sleep_functions_on_battery_show,
+		   sleep_functions_on_battery_store);
 
 static struct attribute *toshiba_attributes[] = {
 	&dev_attr_kbd_backlight_mode.attr,
@@ -1396,6 +1465,7 @@ static struct attribute *toshiba_attributes[] = {
 	&dev_attr_touchpad.attr,
 	&dev_attr_position.attr,
 	&dev_attr_usb_sleep_charge.attr,
+	&dev_attr_sleep_functions_on_battery.attr,
 	NULL,
 };
 
@@ -1663,6 +1733,67 @@ static ssize_t toshiba_usb_sleep_charge_store(struct device *dev,
 	return count;
 }
 
+static ssize_t sleep_functions_on_battery_show(struct device *dev,
+					       struct device_attribute *attr,
+					       char *buf)
+{
+	struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
+	u32 state;
+	int bat_lvl;
+	int status;
+	int ret;
+	int tmp;
+
+	ret = toshiba_sleep_functions_status_get(toshiba, &state);
+	if (ret < 0)
+		return ret;
+
+	/* Determine the status: 0x4 - Enabled | 0x1 - Disabled */
+	tmp = state & SCI_USB_CHARGE_BAT_MASK;
+	status = (tmp == 0x4) ? 1 : 0;
+	/* Determine the battery level set */
+	bat_lvl = state >> HCI_MISC_SHIFT;
+
+	return sprintf(buf, "%d %d\n", status, bat_lvl);
+}
+
+static ssize_t sleep_functions_on_battery_store(struct device *dev,
+						struct device_attribute *attr,
+						const char *buf, size_t count)
+{
+	struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
+	u32 status;
+	int value;
+	int ret;
+	int tmp;
+
+	ret = kstrtoint(buf, 0, &value);
+	if (ret)
+		return ret;
+
+	/* Set the status of the function:
+	 * 0 - Disabled
+	 * 1-100 - Enabled
+	 */
+	if (value < 0 || value > 100)
+		return -EINVAL;
+
+	if (value == 0) {
+		tmp = toshiba->usbsc_bat_level << HCI_MISC_SHIFT;
+		status = tmp | SCI_USB_CHARGE_BAT_LVL_OFF;
+	} else {
+		tmp = value << HCI_MISC_SHIFT;
+		status = tmp | SCI_USB_CHARGE_BAT_LVL_ON;
+	}
+	ret = toshiba_sleep_functions_status_set(toshiba, status);
+	if (ret < 0)
+		return ret;
+
+	toshiba->usbsc_bat_level = status >> HCI_MISC_SHIFT;
+
+	return count;
+}
+
 static umode_t toshiba_sysfs_is_visible(struct kobject *kobj,
 					struct attribute *attr, int idx)
 {
@@ -1680,6 +1811,8 @@ static umode_t toshiba_sysfs_is_visible(struct kobject *kobj,
 		exists = (drv->accelerometer_supported) ? true : false;
 	else if (attr == &dev_attr_usb_sleep_charge.attr)
 		exists = (drv->usb_sleep_charge_supported) ? true : false;
+	else if (attr == &dev_attr_sleep_functions_on_battery.attr)
+		exists = (drv->usb_sleep_charge_supported) ? true : false;
 
 	return exists ? attr->mode : 0;
 }
Signature · 1 line
2.2.1
author maintainer
#3 lore raw

PATCH v2 3/4 toshiba_acpi: Add support for USB Rapid Charge

In reply to Azael Avalos

Newer Toshiba laptops equipped with USB 3.0 ports now have the functionality of rapid charging devices connected to their USB hubs.

This patch adds support to use such feature by creating a sysfs entry named "usb_rapid_charge", accepting only two values, 0 to disable and 1 to enable, however, the machine needs a restart everytime the function is toggled.

---
 drivers/platform/x86/toshiba_acpi.c | 107 ++++++++++++++++++++++++++++++++++++
 1 file changed, 107 insertions(+)
drivers/platform/x86/toshiba_acpi.c +107 -0
index 3b6e952..ab08d00 100644
@@ -155,6 +155,7 @@ MODULE_LICENSE("GPL");
 #define SCI_USB_CHARGE_BAT_LVL_OFF	0x1
 #define SCI_USB_CHARGE_BAT_LVL_ON	0x4
 #define SCI_USB_CHARGE_BAT_LVL		0x0200
+#define SCI_USB_CHARGE_RAPID_DSP	0x0300
 
 struct toshiba_acpi_dev {
 	struct acpi_device *acpi_dev;
@@ -188,6 +189,7 @@ struct toshiba_acpi_dev {
 	unsigned int eco_supported:1;
 	unsigned int accelerometer_supported:1;
 	unsigned int usb_sleep_charge_supported:1;
+	unsigned int usb_rapid_charge_supported:1;
 	unsigned int sysfs_created:1;
 
 	struct mutex mutex;
@@ -874,6 +876,60 @@ static int toshiba_sleep_functions_status_set(struct toshiba_acpi_dev *dev,
 	return 0;
 }
 
+static int toshiba_usb_rapid_charge_get(struct toshiba_acpi_dev *dev,
+					u32 *state)
+{
+	u32 in[TCI_WORDS] = { SCI_GET, SCI_USB_SLEEP_CHARGE, 0, 0, 0, 0 };
+	u32 out[TCI_WORDS];
+	acpi_status status;
+
+	if (!sci_open(dev))
+		return -EIO;
+
+	in[5] = SCI_USB_CHARGE_RAPID_DSP;
+	status = tci_raw(dev, in, out);
+	sci_close(dev);
+	if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+		pr_err("ACPI call to get USB S&C battery level failed\n");
+		return -EIO;
+	} else if (out[0] == TOS_NOT_SUPPORTED ||
+		   out[0] == TOS_INPUT_DATA_ERROR) {
+		pr_info("USB Sleep and Charge not supported\n");
+		return -ENODEV;
+	}
+
+	*state = out[2];
+
+	return 0;
+}
+
+static int toshiba_usb_rapid_charge_set(struct toshiba_acpi_dev *dev,
+					u32 state)
+{
+	u32 in[TCI_WORDS] = { SCI_SET, SCI_USB_SLEEP_CHARGE, 0, 0, 0, 0 };
+	u32 out[TCI_WORDS];
+	acpi_status status;
+
+	if (!sci_open(dev))
+		return -EIO;
+
+	in[2] = state;
+	in[5] = SCI_USB_CHARGE_RAPID_DSP;
+	status = tci_raw(dev, in, out);
+	sci_close(dev);
+	if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
+		pr_err("ACPI call to set USB S&C battery level failed\n");
+		return -EIO;
+	} else if (out[0] == TOS_NOT_SUPPORTED) {
+		pr_info("USB Sleep and Charge not supported\n");
+		return -ENODEV;
+	} else if (out[0] == TOS_INPUT_DATA_ERROR) {
+		return -EIO;
+	}
+
+	return 0;
+}
+
 /* Bluetooth rfkill handlers */
 
 static u32 hci_get_bt_present(struct toshiba_acpi_dev *dev, bool *present)
@@ -1439,6 +1495,12 @@ static ssize_t sleep_functions_on_battery_show(struct device *dev,
 static ssize_t sleep_functions_on_battery_store(struct device *dev,
 						struct device_attribute *attr,
 						const char *buf, size_t count);
+static ssize_t toshiba_usb_rapid_charge_show(struct device *dev,
+					     struct device_attribute *attr,
+					     char *buf);
+static ssize_t toshiba_usb_rapid_charge_store(struct device *dev,
+					      struct device_attribute *attr,
+					      const char *buf, size_t count);
 
 static DEVICE_ATTR(kbd_backlight_mode, S_IRUGO | S_IWUSR,
 		   toshiba_kbd_bl_mode_show, toshiba_kbd_bl_mode_store);
@@ -1456,6 +1518,9 @@ static DEVICE_ATTR(usb_sleep_charge, S_IRUGO | S_IWUSR,
 static DEVICE_ATTR(sleep_functions_on_battery, S_IRUGO | S_IWUSR,
 		   sleep_functions_on_battery_show,
 		   sleep_functions_on_battery_store);
+static DEVICE_ATTR(usb_rapid_charge, S_IRUGO | S_IWUSR,
+		   toshiba_usb_rapid_charge_show,
+		   toshiba_usb_rapid_charge_store);
 
 static struct attribute *toshiba_attributes[] = {
 	&dev_attr_kbd_backlight_mode.attr,
@@ -1466,6 +1531,7 @@ static struct attribute *toshiba_attributes[] = {
 	&dev_attr_position.attr,
 	&dev_attr_usb_sleep_charge.attr,
 	&dev_attr_sleep_functions_on_battery.attr,
+	&dev_attr_usb_rapid_charge.attr,
 	NULL,
 };
 
@@ -1794,6 +1860,42 @@ static ssize_t sleep_functions_on_battery_store(struct device *dev,
 	return count;
 }
 
+static ssize_t toshiba_usb_rapid_charge_show(struct device *dev,
+					     struct device_attribute *attr,
+					     char *buf)
+{
+	struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
+	u32 state;
+	int ret;
+
+	ret = toshiba_usb_rapid_charge_get(toshiba, &state);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d\n", state);
+}
+
+static ssize_t toshiba_usb_rapid_charge_store(struct device *dev,
+					      struct device_attribute *attr,
+					      const char *buf, size_t count)
+{
+	struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
+	int state;
+	int ret;
+
+	ret = kstrtoint(buf, 0, &state);
+	if (ret)
+		return ret;
+	if (state != 0 && state != 1)
+		return -EINVAL;
+
+	ret = toshiba_usb_rapid_charge_set(toshiba, state);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
 static umode_t toshiba_sysfs_is_visible(struct kobject *kobj,
 					struct attribute *attr, int idx)
 {
@@ -1813,6 +1915,8 @@ static umode_t toshiba_sysfs_is_visible(struct kobject *kobj,
 		exists = (drv->usb_sleep_charge_supported) ? true : false;
 	else if (attr == &dev_attr_sleep_functions_on_battery.attr)
 		exists = (drv->usb_sleep_charge_supported) ? true : false;
+	else if (attr == &dev_attr_usb_rapid_charge.attr)
+		exists = (drv->usb_rapid_charge_supported) ? true : false;
 
 	return exists ? attr->mode : 0;
 }
@@ -2225,6 +2329,9 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
 	ret = toshiba_usb_sleep_charge_get(dev, &dummy);
 	dev->usb_sleep_charge_supported = !ret;
 
+	ret = toshiba_usb_rapid_charge_get(dev, &dummy);
+	dev->usb_rapid_charge_supported = !ret;
+
 	/* Determine whether or not BIOS supports fan and video interfaces */
 
 	ret = get_video_status(dev, &dummy);
Signature · 1 line
2.2.1
author maintainer
#4 lore raw

PATCH v2 4/4 toshiba_acpi: Add support for USB Sleep and Music

In reply to Azael Avalos

Newer Toshiba laptops now come with a feature called USB Sleep and Music, where the laptop speakers remain powered and the line-in jack is used to connect an external device to use the laptop speakers when the computer is asleep or turned off.

This patchs adds support to such feature, by creating a sysfs entry named "usb_sleep_music", accepting only two values, 0 to disable and 1 to enable.

---
 drivers/platform/x86/toshiba_acpi.c | 97 +++++++++++++++++++++++++++++++++++++
 1 file changed, 97 insertions(+)
drivers/platform/x86/toshiba_acpi.c +97 -0
index ab08d00..4811a90 100644
@@ -124,6 +124,7 @@ MODULE_LICENSE("GPL");
 #define SCI_ILLUMINATION		0x014e
 #define SCI_USB_SLEEP_CHARGE		0x0150
 #define SCI_KBD_ILLUM_STATUS		0x015c
+#define SCI_USB_SLEEP_MUSIC		0x015e
 #define SCI_TOUCHPAD			0x050e
 
 /* field definitions */
@@ -190,6 +191,7 @@ struct toshiba_acpi_dev {
 	unsigned int accelerometer_supported:1;
 	unsigned int usb_sleep_charge_supported:1;
 	unsigned int usb_rapid_charge_supported:1;
+	unsigned int usb_sleep_music_supported:1;
 	unsigned int sysfs_created:1;
 
 	struct mutex mutex;
@@ -930,6 +932,50 @@ static int toshiba_usb_rapid_charge_set(struct toshiba_acpi_dev *dev,
 	return 0;
 }
 
+static int toshiba_usb_sleep_music_get(struct toshiba_acpi_dev *dev, u32 *state)
+{
+	u32 result;
+
+	if (!sci_open(dev))
+		return -EIO;
+
+	result = sci_read(dev, SCI_USB_SLEEP_MUSIC, state);
+	sci_close(dev);
+	if (result == TOS_FAILURE) {
+		pr_err("ACPI call to set USB S&C mode failed\n");
+		return -EIO;
+	} else if (result == TOS_NOT_SUPPORTED) {
+		pr_info("USB Sleep and Charge not supported\n");
+		return -ENODEV;
+	} else if (result == TOS_INPUT_DATA_ERROR) {
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int toshiba_usb_sleep_music_set(struct toshiba_acpi_dev *dev, u32 state)
+{
+	u32 result;
+
+	if (!sci_open(dev))
+		return -EIO;
+
+	result = sci_write(dev, SCI_USB_SLEEP_MUSIC, state);
+	sci_close(dev);
+	if (result == TOS_FAILURE) {
+		pr_err("ACPI call to set USB S&C mode failed\n");
+		return -EIO;
+	} else if (result == TOS_NOT_SUPPORTED) {
+		pr_info("USB Sleep and Charge not supported\n");
+		return -ENODEV;
+	} else if (result == TOS_INPUT_DATA_ERROR) {
+		return -EIO;
+	}
+
+	return 0;
+}
+
 /* Bluetooth rfkill handlers */
 
 static u32 hci_get_bt_present(struct toshiba_acpi_dev *dev, bool *present)
@@ -1501,6 +1547,12 @@ static ssize_t toshiba_usb_rapid_charge_show(struct device *dev,
 static ssize_t toshiba_usb_rapid_charge_store(struct device *dev,
 					      struct device_attribute *attr,
 					      const char *buf, size_t count);
+static ssize_t toshiba_usb_sleep_music_show(struct device *dev,
+					    struct device_attribute *attr,
+					    char *buf);
+static ssize_t toshiba_usb_sleep_music_store(struct device *dev,
+					     struct device_attribute *attr,
+					     const char *buf, size_t count);
 
 static DEVICE_ATTR(kbd_backlight_mode, S_IRUGO | S_IWUSR,
 		   toshiba_kbd_bl_mode_show, toshiba_kbd_bl_mode_store);
@@ -1521,6 +1573,9 @@ static DEVICE_ATTR(sleep_functions_on_battery, S_IRUGO | S_IWUSR,
 static DEVICE_ATTR(usb_rapid_charge, S_IRUGO | S_IWUSR,
 		   toshiba_usb_rapid_charge_show,
 		   toshiba_usb_rapid_charge_store);
+static DEVICE_ATTR(usb_sleep_music, S_IRUGO | S_IWUSR,
+		   toshiba_usb_sleep_music_show,
+		   toshiba_usb_sleep_music_store);
 
 static struct attribute *toshiba_attributes[] = {
 	&dev_attr_kbd_backlight_mode.attr,
@@ -1532,6 +1587,7 @@ static struct attribute *toshiba_attributes[] = {
 	&dev_attr_usb_sleep_charge.attr,
 	&dev_attr_sleep_functions_on_battery.attr,
 	&dev_attr_usb_rapid_charge.attr,
+	&dev_attr_usb_sleep_music.attr,
 	NULL,
 };
 
@@ -1896,6 +1952,42 @@ static ssize_t toshiba_usb_rapid_charge_store(struct device *dev,
 	return count;
 }
 
+static ssize_t toshiba_usb_sleep_music_show(struct device *dev,
+					    struct device_attribute *attr,
+					    char *buf)
+{
+	struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
+	u32 state;
+	int ret;
+
+	ret = toshiba_usb_sleep_music_get(toshiba, &state);
+	if (ret < 0)
+		return ret;
+
+	return sprintf(buf, "%d\n", state);
+}
+
+static ssize_t toshiba_usb_sleep_music_store(struct device *dev,
+					     struct device_attribute *attr,
+					     const char *buf, size_t count)
+{
+	struct toshiba_acpi_dev *toshiba = dev_get_drvdata(dev);
+	int state;
+	int ret;
+
+	ret = kstrtoint(buf, 0, &state);
+	if (ret)
+		return ret;
+	if (state != 0 && state != 1)
+		return -EINVAL;
+
+	ret = toshiba_usb_sleep_music_set(toshiba, state);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
 static umode_t toshiba_sysfs_is_visible(struct kobject *kobj,
 					struct attribute *attr, int idx)
 {
@@ -1917,6 +2009,8 @@ static umode_t toshiba_sysfs_is_visible(struct kobject *kobj,
 		exists = (drv->usb_sleep_charge_supported) ? true : false;
 	else if (attr == &dev_attr_usb_rapid_charge.attr)
 		exists = (drv->usb_rapid_charge_supported) ? true : false;
+	else if (attr == &dev_attr_usb_sleep_music.attr)
+		exists = (drv->usb_sleep_music_supported) ? true : false;
 
 	return exists ? attr->mode : 0;
 }
@@ -2332,6 +2426,9 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
 	ret = toshiba_usb_rapid_charge_get(dev, &dummy);
 	dev->usb_rapid_charge_supported = !ret;
 
+	ret = toshiba_usb_sleep_music_get(dev, &dummy);
+	dev->usb_sleep_music_supported = !ret;
+
 	/* Determine whether or not BIOS supports fan and video interfaces */
 
 	ret = get_video_status(dev, &dummy);
Signature · 1 line
2.2.1
Applied
#5 lore raw
In reply to Azael Avalos
Quoted 9 lines · Azael Avalos

The following patches add support to several USB Sleep functions found on newer Toshiba laptops, allowing to use the USB ports while the laptop is asleep or turned off.

Changes since v1:
- Changed accepted parameters on first patch and added a short description of what the auto and alternate charging modes mean
- Some misc format and typo changes

Quoted 8 lines

Azael Avalos (4):
toshiba_acpi: Add support for USB Sleep and Charge function
toshiba_acpi: Add support for USB Sleep functions under battery
toshiba_acpi: Add support for USB Rapid Charge
toshiba_acpi: Add support for USB Sleep and Music

 drivers/platform/x86/toshiba_acpi.c | 455 ++++++++++++++++++++++++++++++++++++
 1 file changed, 455 insertions(+)

Queued for 3.20, thanks Azael.

Signature · 2 lines
Darren Hart
Intel Open Source Technology Center
#6 lore raw
In reply to Azael Avalos
Quoted 3 lines · Azael Avalos

The following patches add support to several USB Sleep functions found on newer Toshiba laptops, allowing to use the USB ports while the laptop is asleep or turned off.

Hi,

this is most interesting. But the interface is terrible. If possible we would like to have a generic interface for this, which should not depend on the specific platform in use and would have to be per bus or even per port (for example the ports on a Thunderbolt dock would not work with your module).
Do you think we could provide a hook from generic code into platform code to detect the capability for power control?

Regards
Oliver

author maintainer
#7 lore raw

Hi there,

Sorry for the late reply.

2015-01-20 4:15 GMT-07:00 Oliver Neukum <[email protected]>:

Quoted 8 lines · Azael Avalos
Quoted 3 lines

The following patches add support to several USB Sleep functions found on newer Toshiba laptops, allowing to use the USB ports while the laptop is asleep or turned off.

Hi,

this is most interesting. But the interface is terrible. If

Well, I'm just providing the on/off switch on Toshiba specific hardware, but I'm unaware/unfamiliar with how other vendors implement this feature.

Quoted 4 lines

possible we would like to have a generic interface for this, which should not depend on the specific platform in use and would have to be per bus or even per port (for example the ports on a Thunderbolt dock would not work with your module).

Sounds good, as not all ports carry such functionality, on my current laptop only two ports provide this, the other two are just normal USB 2/3 ports (configurable ;-) ).

Quoted 2 lines

Do you think we could provide a hook from generic code into platform code to detect the capability for power control?

If there's an existing API already, I'll be glad to modify the code to use it, if it doesn't exist yet, I'll simply adapt the code to the chosen standard whenever becomes available.

Quoted 6 lines

Regards
Oliver

Cheers
Azael

Signature · 1 line
-- El mundo apesta y vosotros apestais tambien --
#8 lore raw
Quoted 27 lines · Azael Avalos

Hi there,

Sorry for the late reply.

2015-01-20 4:15 GMT-07:00 Oliver Neukum <[email protected]>:

Quoted 8 lines · Azael Avalos
Quoted 3 lines

The following patches add support to several USB Sleep functions found on newer Toshiba laptops, allowing to use the USB ports while the laptop is asleep or turned off.

Hi,

this is most interesting. But the interface is terrible. If

Well, I'm just providing the on/off switch on Toshiba specific hardware, but I'm unaware/unfamiliar with how other vendors implement this feature.

Quoted 4 lines

possible we would like to have a generic interface for this, which should not depend on the specific platform in use and would have to be per bus or even per port (for example the ports on a Thunderbolt dock would not work with your module).

Sounds good, as not all ports carry such functionality, on my current laptop only two ports provide this, the other two are just normal USB 2/3 ports (configurable ;-) ).

Quoted 6 lines
Quoted 2 lines

Do you think we could provide a hook from generic code into platform code to detect the capability for power control?

If there's an existing API already, I'll be glad to modify the code to use it, if it doesn't exist yet, I'll simply adapt the code to the chosen standard whenever becomes available.

Given the ACPI calls which are platform specific, a general purpose driver doesn't seem likely. I'm keeping this queued as is unless you ask me to drop it Azael.

Signature · 2 lines
Darren Hart
Intel Open Source Technology Center