usb: serial: add register map for F81232

index c5dc233..efd45a7 100644
@@ -23,6 +23,8 @@
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/version.h>
 
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1934, 0x0706) },

@@ -37,19 +39,197 @@ MODULE_DEVICE_TABLE(usb, id_table);
 #define UART_STATE_TRANSIENT_MASK	0x74
 #define UART_DCD			0x01
 #define UART_DSR			0x02
-#define UART_BREAK_ERROR		0x04
 #define UART_RING			0x08
-#define UART_FRAME_ERROR		0x10
-#define UART_PARITY_ERROR		0x20
-#define UART_OVERRUN_ERROR		0x40
 #define UART_CTS			0x80
 
+#define UART_BREAK_ERROR		0x10
+#define UART_FRAME_ERROR		0x08
+#define UART_PARITY_ERROR		0x04
+#define UART_OVERRUN_ERROR		0x02
+#define  SERIAL_EVEN_PARITY         (UART_LCR_PARITY | UART_LCR_EPAR)
+
+#define REGISTER_REQUEST 0xA0
+#define GET_REGISTER 0xc0
+#define SET_REGISTER 0x40
+#define F81232_USB_TIMEOUT 1000
+#define F81232_USB_RETRY 20
+
+#define SERIAL_BASE_ADDRESS	   (0x0120)
+#define RECEIVE_BUFFER_REGISTER    (0x00 + SERIAL_BASE_ADDRESS)
+#define TRANSMIT_HOLDING_REGISTER  (0x00 + SERIAL_BASE_ADDRESS)
+#define INTERRUPT_ENABLE_REGISTER  (0x01 + SERIAL_BASE_ADDRESS)
+#define INTERRUPT_IDENT_REGISTER   (0x02 + SERIAL_BASE_ADDRESS)
+#define FIFO_CONTROL_REGISTER      (0x02 + SERIAL_BASE_ADDRESS)
+#define LINE_CONTROL_REGISTER      (0x03 + SERIAL_BASE_ADDRESS)
+#define MODEM_CONTROL_REGISTER     (0x04 + SERIAL_BASE_ADDRESS)
+#define LINE_STATUS_REGISTER       (0x05 + SERIAL_BASE_ADDRESS)
+#define MODEM_STATUS_REGISTER      (0x06 + SERIAL_BASE_ADDRESS)
+
 struct f81232_private {
 	spinlock_t lock;
 	u8 line_control;
 	u8 line_status;
+
+	struct work_struct int_worker;
+	struct usb_serial_port *port;
 };
 
+static inline int calc_baud_divisor(u32 baudrate)
+{
+	u32 divisor, rem;
+
+	divisor = 115200L / baudrate;
+	rem = 115200L % baudrate;
+
+	/* Round to nearest divisor */
+	if (((rem * 2) >= baudrate) && (baudrate != 110))
+		divisor++;
+
+	return divisor;
+}
+
+
+static inline int f81232_get_register(struct usb_device *dev,
+							  u16 reg, u8 *data)
+{
+	int status;
+	int i = F81232_USB_RETRY;
+
+	while (i--) {
+		status = usb_control_msg(dev,
+				 usb_rcvctrlpipe(dev, 0),
+				 REGISTER_REQUEST,
+				 GET_REGISTER,
+				 reg,
+				 0,
+				 data,
+				 sizeof(*data),
+				 F81232_USB_TIMEOUT);
+
+		if (status < 0) {
+			dev_dbg(&dev->dev,
+				"f81232_get_register status: %d, fail:%d\n",
+				status, i);
+		} else
+			break;
+	}
+
+	return status;
+}
+
+
+static inline int f81232_set_register(struct usb_device *dev,
+							  u16 reg, u8 data)
+{
+	int status;
+	int i = F81232_USB_RETRY;
+
+	while (i--) {
+		status = usb_control_msg(dev,
+				 usb_sndctrlpipe(dev, 0),
+				 REGISTER_REQUEST,
+				 SET_REGISTER,
+				 reg,
+				 0,
+				 &data,
+				 1,
+				 F81232_USB_TIMEOUT);
+
+		if (status < 0)
+			dev_dbg(&dev->dev,
+				"f81232_set_register status: %d, fail:%d\n",
+				status, i);
+		else
+			break;
+	}
+
+	return status;
+}
+
+static void f81232_read_msr(struct f81232_private *priv)
+{
+	unsigned long flags;
+	u8 current_msr, old_msr;
+	struct usb_device *dev = priv->port->serial->dev;
+
+	f81232_get_register(dev, MODEM_STATUS_REGISTER, &current_msr);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	old_msr = priv->line_status;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+
+	if ((current_msr & 0xf0) ^ (old_msr & 0xf0)) {
+		if (priv->port->port.tty)
+			usb_serial_handle_dcd_change(priv->port,
+				priv->port->port.tty,
+				current_msr & UART_MSR_DCD);
+
+		spin_lock_irqsave(&priv->lock, flags);
+		priv->line_status = current_msr;
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+
+	dev_dbg(&dev->dev, "f81232_read_msr: %x\n", priv->line_status);
+}
+
+
+static inline int update_mctrl(struct f81232_private *port_priv,
+					   unsigned int set, unsigned int clear)
+{
+	struct usb_device *dev = port_priv->port->serial->dev;
+	u8 urb_value;
+	int status;
+	unsigned long flags;
+
+	if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
+		dev_dbg(&dev->dev, "update_mctrl fail - DTR|RTS %d\n",
+			__LINE__);
+		return 0;	/* no change */
+	}
+
+
+	clear &= ~set;	/* 'set' takes precedence over 'clear' */
+	urb_value = 8 | port_priv->line_control;
+
+
+	if (clear & TIOCM_DTR) {
+		urb_value &= ~UART_MCR_DTR;
+		dev_dbg(&dev->dev, "clear DTR\n");
+	}
+
+	if (clear & TIOCM_RTS) {
+		urb_value &= ~UART_MCR_RTS;
+		dev_dbg(&dev->dev, "clear RTS\n");
+	}
+
+	if (set & TIOCM_DTR) {
+		urb_value |= UART_MCR_DTR;
+		dev_dbg(&dev->dev, "set DTR\n");
+	}
+
+	if (set & TIOCM_RTS) {
+		urb_value |= UART_MCR_RTS;
+		dev_dbg(&dev->dev, "set RTS\n");
+	}
+
+	dev_dbg(&dev->dev, "update_mctrl n:%x o:%x\n", urb_value,
+			port_priv->line_control);
+
+	status = f81232_set_register(dev, MODEM_CONTROL_REGISTER, urb_value);
+
+	if (status < 0) {
+		dev_dbg(&dev->dev, "MODEM_CONTROL_REGISTER < 0\n");
+	} else {
+		spin_lock_irqsave(&port_priv->lock, flags);
+		port_priv->line_control = urb_value;
+		spin_unlock_irqrestore(&port_priv->lock, flags);
+	}
+
+	f81232_read_msr(port_priv);
+
+	return status;
+}
 static void f81232_update_line_status(struct usb_serial_port *port,
 				      unsigned char *data,
 				      unsigned int actual_length)

@@ -201,8 +381,8 @@ static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (result) {
-		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
-			" error %d\n", __func__, result);
+		dev_err(&port->dev, "failed submitting interrupt urb, error %d\n",
+			result);
 		return result;
 	}
 

@@ -241,6 +421,7 @@ static void f81232_dtr_rts(struct usb_serial_port *port, int on)
 static int f81232_carrier_raised(struct usb_serial_port *port)
 {
 	struct f81232_private *priv = usb_get_serial_port_data(port);
+
 	if (priv->line_status & UART_DCD)
 		return 1;
 	return 0;

@@ -254,13 +435,18 @@ static int f81232_ioctl(struct tty_struct *tty,
 
 	switch (cmd) {
 	case TIOCGSERIAL:
-		memset(&ser, 0, sizeof ser);
-		ser.type = PORT_16654;
+		memset(&ser, 0, sizeof(ser));
+		ser.flags		= ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
+		ser.xmit_fifo_size	= port->bulk_out_size;
+		ser.close_delay		= 5*HZ;
+		ser.closing_wait	= 30*HZ;
+
+		ser.type = PORT_16550A;
 		ser.line = port->minor;
 		ser.port = port->port_number;
-		ser.baud_base = 460800;
+		ser.baud_base = 115200;
 
-		if (copy_to_user((void __user *)arg, &ser, sizeof ser))
+		if (copy_to_user((void __user *)arg, &ser, sizeof(ser)))
 			return -EFAULT;
 
 		return 0;

@@ -270,6 +456,17 @@ static int f81232_ioctl(struct tty_struct *tty,
 	return -ENOIOCTLCMD;
 }
 
+
+
+
+static void f81232_int_work_wq(struct work_struct *work)
+{
+	struct f81232_private *priv =
+		container_of(work, struct f81232_private, int_worker);
+
+	f81232_read_msr(priv);
+}
+
 static int f81232_port_probe(struct usb_serial_port *port)
 {
 	struct f81232_private *priv;

@@ -279,10 +476,11 @@ static int f81232_port_probe(struct usb_serial_port *port)
 		return -ENOMEM;
 
 	spin_lock_init(&priv->lock);
+	INIT_WORK(&priv->int_worker, f81232_int_work_wq);
 
 	usb_set_serial_port_data(port, priv);
 
-	port->port.drain_delay = 256;
+	priv->port = port;
 
 	return 0;
 }

@@ -304,11 +502,11 @@ static struct usb_serial_driver f81232_device = {
 	},
 	.id_table =		id_table,
 	.num_ports =		1,
-	.bulk_in_size =		256,
-	.bulk_out_size =	256,
+	.bulk_in_size =		64,
+	.bulk_out_size =	64,
 	.open =			f81232_open,
 	.close =		f81232_close,
-	.dtr_rts = 		f81232_dtr_rts,
+	.dtr_rts =		f81232_dtr_rts,
 	.carrier_raised =	f81232_carrier_raised,
 	.ioctl =		f81232_ioctl,
 	.break_ctl =		f81232_break_ctl,

@@ -330,5 +528,6 @@ static struct usb_serial_driver * const serial_drivers[] = {
 module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver");
-MODULE_AUTHOR("Greg Kroah-Hartman <[email protected]");
+MODULE_AUTHOR("Greg Kroah-Hartman <[email protected]>");
+MODULE_AUTHOR("Peter Hong <[email protected]>");
 MODULE_LICENSE("GPL v2");