Versatile AB/PB clocksource support
Subsystems (2)
Rob Herring
maintainercover Versatile AB/PB clocksource support
The Versatile clocksource driver can also be used on Versatile AB and PB platforms, not just Versatile Express. This series adds support for those boards.
I've split this off from the rest of the Versatile DT and multi-platform support as I'm not going to get it in place for 3.20. This part is fairly trivial and is ready to go.
Daniel, Can you please take the whole series.
Rob
Rob Herring (3):
dt/bindings: Add binding for Versatile system registers
clocksource: versatile: adapt for Versatile AB and PB boards
dts: versatile: add sysregs node
Documentation/devicetree/bindings/arm/versatile-sysreg.txt | 10 ++++++++++ arch/arm/boot/dts/versatile-ab.dts | 5 +++++ drivers/clocksource/versatile.c | 4 +++- 3 files changed, 18 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/arm/versatile-sysreg.txt
Signature · 1 line
2.1.0
Rob Herring
maintainerPATCH 1/3 dt/bindings: Add binding for Versatile system registers
Add binding for Versatile board system registers found in the FPGA of the Versatile/AB and Versatile/PB boards.
--- Documentation/devicetree/bindings/arm/versatile-sysreg.txt | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/versatile-sysreg.txt
Documentation/devicetree/bindings/arm/versatile-sysreg.txt new file +10 -0
@@ -0,0 +1,10 @@ +ARM Versatile system registers +-------------------------------------- + +This is a system control registers block, providing multiple low level +platform functions like board detection and identification, software +interrupt generation, MMC and NOR Flash control etc. + +Required node properties: +- compatible value : = "arm,versatile-sysreg", "syscon" +- reg : physical base address and the size of the registers window
Signature · 1 line
2.1.0
Rob Herring
maintainerPATCH 2/3 clocksource: versatile: adapt for Versatile AB and PB boards
In reply to Rob HerringThe same 24MHz counter is also present on Versatile AB and PB boards, so add the compatible string for them.
--- drivers/clocksource/versatile.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/clocksource/versatile.c +3 -1
@@ -36,5 +36,7 @@ static void __init versatile_sched_clock_init(struct device_node *node)sched_clock_register (versatile_sys_24mhz_read,32 ,24000000 ); } -CLOCKSOURCE_OF_DECLARE (versatile,"arm,vexpress-sysreg" , +CLOCKSOURCE_OF_DECLARE (vexpress,"arm,vexpress-sysreg" , + versatile_sched_clock_init); +CLOCKSOURCE_OF_DECLARE (versatile,"arm,versatile-sysreg" , versatile_sched_clock_init);
Signature · 1 line
2.1.0
Rob Herring
maintainerPATCH 3/3 dts: versatile: add sysregs node
In reply to Rob HerringThe Versatile boards have the same sysregs as other ARM Ltd boards. Add the nodes in order to enable support for 24MHz counter as sched_clock.
This is a minimal node definition as the existing sub node definition used on VExpress has some issues raised by Linus W.
--- arch/arm/boot/dts/versatile-ab.dts | 5 +++++ 1 file changed, 5 insertions(+)
arch/arm/boot/dts/versatile-ab.dts +5 -0
@@ -252,6 +252,11 @@ #size-cells = <1>; ranges = <0 0x10000000 0x10000>; + sysreg at 0 { + compatible = "arm,versatile-sysreg", "syscon"; + reg = <0x00000 0x1000>; + }; + aaci at 4000 { compatible = "arm,primecell"; reg = <0x4000 0x1000>;
Signature · 1 line
2.1.0
Re: [PATCH 2/3] clocksource: versatile: adapt for Versatile AB and PB boards
In reply to Rob HerringQuoted 18 lines · Rob Herring
The same 24MHz counter is also present on Versatile AB and PB boards, so add the compatible string for them.
Signed-off-by Rob Herring <[email protected]>Cc Liviu Dudau <[email protected]>Cc Sudeep Holla <[email protected]>Cc Lorenzo Pieralisi <[email protected]>Cc Daniel Lezcano <[email protected]>Cc Thomas Gleixner <[email protected]>--- drivers/clocksource/versatile.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)drivers/clocksource/versatile.c +0
-0
drivers/clocksource/versatile.c static void __init versatile_sched_clock_init(struct device_node *node) · line 42
Quoted 8 lines
drivers/clocksource/versatile.c +3
-1@@ -36,5 +36,7 @@ static void __init versatile_sched_clock_init(struct device_node *node)sched_clock_register (versatile_sys_24mhz_read,32 ,24000000 ); } -CLOCKSOURCE_OF_DECLARE (versatile,"arm,vexpress-sysreg" , +CLOCKSOURCE_OF_DECLARE (vexpress,"arm,vexpress-sysreg" , + versatile_sched_clock_init); +CLOCKSOURCE_OF_DECLARE (versatile,"arm,versatile-sysreg" , versatile_sched_clock_init);
Quoted 4 lines
Signature · 1 line
2.1.0
Signature · 8 lines
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
?\_(?)_/?Re: [PATCH 1/3] dt/bindings: Add binding for Versatile system registers
In reply to Rob HerringQuoted 9 lines · Rob Herring
Add binding for Versatile board system registers found in the FPGA of the Versatile/AB and Versatile/PB boards.
Signed-off-by Rob Herring <[email protected]>Cc Pawel Moll <[email protected]>Cc Mark Rutland <[email protected]>Cc Ian Campbell <[email protected]>Cc Kumar Gala <[email protected]>Cc devicetree at vger.kernel.org
Yours,
Linus Walleij
Re: [PATCH 3/3] dts: versatile: add sysregs node
In reply to Rob HerringQuoted 10 lines · Rob Herring
The Versatile boards have the same sysregs as other ARM Ltd boards. Add the nodes in order to enable support for 24MHz counter as
sched_clock.This is a minimal node definition as the existing sub node definition used on VExpress has some issues raised by Linus W.
Signed-off-by Rob Herring <[email protected]>Cc Russell King <[email protected]>Cc Linus Walleij <[email protected]>Cc devicetree at vger.kernel.org
Yours,
Linus Walleij