Skip to contentSkip to conversation

lpfc: Linux lpfc driver doesn't re-establish the link after a cable pull on LPe12002

PATCH In review James Smart 1 participant 1 message Feb 5, 2015

Subsystems (2)
SCSI Emulex/Broadcom lpfc FC/FCoE SCSI driver
lore
Share & tools
lore

James Smart

author
#0 lore raw

PATCH 5/21 lpfc: Linux lpfc driver doesn't re-establish the link after a cable pull on LPe12002

---
 drivers/scsi/lpfc/lpfc_els.c     | 3 +--
 drivers/scsi/lpfc/lpfc_hbadisc.c | 6 ++----
 2 files changed, 3 insertions(+), 6 deletions(-)
drivers/scsi/lpfc/lpfc_els.c +1 -2
index c66088d..6350563 100644
@@ -2243,8 +2243,7 @@ lpfc_adisc_done(struct lpfc_vport *vport)
 	*/
 	if (vport->port_state < LPFC_VPORT_READY) {
 		/* If we get here, there is nothing to ADISC */
-		if (vport->port_type == LPFC_PHYSICAL_PORT)
-			lpfc_issue_clear_la(phba, vport);
+		lpfc_issue_clear_la(phba, vport);
 		if (!(vport->fc_flag & FC_ABORT_DISCOVERY)) {
 			vport->num_disc_nodes = 0;
 			/* go thru NPR list, issue ELS PLOGIs */
drivers/scsi/lpfc/lpfc_hbadisc.c +2 -4
index 5452f1f..b1ad1a0 100644
@@ -5070,8 +5070,7 @@ lpfc_disc_start(struct lpfc_vport *vport)
 	    !(vport->fc_flag & FC_PT2PT) &&
 	    !(vport->fc_flag & FC_RSCN_MODE) &&
 	    (phba->sli_rev < LPFC_SLI_REV4)) {
-		if (vport->port_type == LPFC_PHYSICAL_PORT)
-			lpfc_issue_clear_la(phba, vport);
+		lpfc_issue_clear_la(phba, vport);
 		lpfc_issue_reg_vpi(phba, vport);
 		return;
 	}

@@ -5082,8 +5081,7 @@ lpfc_disc_start(struct lpfc_vport *vport)
 	 */
 	if (vport->port_state < LPFC_VPORT_READY && !clear_la_pending) {
 		/* If we get here, there is nothing to ADISC */
-		if (vport->port_type == LPFC_PHYSICAL_PORT)
-			lpfc_issue_clear_la(phba, vport);
+		lpfc_issue_clear_la(phba, vport);
 
 		if (!(vport->fc_flag & FC_ABORT_DISCOVERY)) {
 			vport->num_disc_nodes = 0;
Signature · 4 lines
1.7.11.7

Signed-off-by: James Smart <[email protected]>
Signed-off-by: Dick Kennedy <[email protected]>