gxt4500: enable on non-PPC architectures
PATCH 1/1 gxt4500: enable on non-PPC architectures
These chips can be present at least on x86 too - Fire GL2 AGP has GXT6000P but this driver is currently limited to PPC.
Enable it for all architectures and add chip configuration for little-endian.
Tested on x86 with Fire GL2 AGP.
Signed-off-by Ondrej Zary <[email protected]>
--- drivers/video/fbdev/Kconfig | 5 +++-- drivers/video/fbdev/gxt4500.c | 7 +++++++ 2 files changed, 10 insertions(+), 2 deletions(-)
drivers/video/fbdev/Kconfig +3 -2
@@ -2143,7 +2143,7 @@ config FB_UDL config FB_IBM_GXT4500 tristate "Framebuffer support for IBM GXT4000P/4500P/6000P/6500P adaptors" - depends on FB && PPC + depends on FB select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT
@@ -2151,7 +2151,8 @@ config FB_IBM_GXT4500 Say Y here to enable support for the IBM GXT4000P/6000P and GXT4500P/6500P display adaptor based on Raster Engine RC1000, found on some IBM System P (pSeries) machines. This driver - doesn't use Geometry Engine GT1000. + doesn't use Geometry Engine GT1000. This driver also supports + AGP Fire GL2/3/4 cards on x86. config FB_PS3 tristate "PS3 GPU framebuffer driver"
drivers/video/fbdev/gxt4500.c +7 -0
@@ -670,8 +670,15 @@ static int gxt4500_probe(struct pci_dev *pdev, const struct pci_device_id *ent)pci_set_drvdata (pdev, info); +#ifdef __BIG_ENDIAN/* Set byte-swapping for DFA aperture for all pixel sizes */ pci_write_config_dword (pdev,CFG_ENDIAN0 ,0x333300 ); +#else /* __LITTLE_ENDIAN */ +/* not sure what this means but fgl23 driver does that */ +pci_write_config_dword (pdev,CFG_ENDIAN0 ,0x2300 ); +/* pci_write_config_dword(pdev, CFG_ENDIAN0 + 4, 0x400000);*/ +pci_write_config_dword (pdev,CFG_ENDIAN0 +8 ,0x98530000 ); +#endif info->fbops = &gxt4500_ops; info->flags =FBINFO_FLAG_DEFAULT ;
Signature · 1 line
Ondrej Zary