Skip to contentSkip to conversation

lib/plist: Provide plist_add_head() for nodes with the same prio

PATCH Superseded Xunlei Pang 2 participants 5 messages Feb 16, 2015

Subsystems (2)

v4 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

PATCH v4 1/3 lib/plist: Provide plist_add_head() for nodes with the same prio

From: Xunlei Pang <[email protected]>

If there're multiple nodes with the same prio as @node, currently plist_add() will add @node behind all of them. Now we need to add @node before all of these nodes for SMP RT scheduler.

This patch adds a common __plist_add() for adding @node before or behind existing nodes with the same prio, then adds plist_add_head() and plist_add_tail() inline wrapper functions for convenient uses.

Finally, define plist_add() with plist_add_tail() which has the same behaviour as before.

---
 include/linux/plist.h | 30 +++++++++++++++++++++++++++++-
 lib/plist.c           | 15 ++++++++++++---
 2 files changed, 41 insertions(+), 4 deletions(-)
include/linux/plist.h +29 -1
index 9788360..e17bb96 100644
@@ -138,7 +138,35 @@ static inline void plist_node_init(struct plist_node *node, int prio)
 	INIT_LIST_HEAD(&node->node_list);
 }
 
-extern void plist_add(struct plist_node *node, struct plist_head *head);
+extern void __plist_add(struct plist_node *node,
+				struct plist_head *head, bool is_head);
+
+/**
+ * plist_add_head - add @node to @head, before all existing same-prio nodes
+ *
+ * @node:	&struct plist_node pointer
+ * @head:	&struct plist_head pointer
+ */
+static inline
+void plist_add_head(struct plist_node *node, struct plist_head *head)
+{
+	__plist_add(node, head, 1);
+}
+
+/**
+ * plist_add_tail - add @node to @head, after all existing same-prio nodes
+ *
+ * @node:	&struct plist_node pointer
+ * @head:	&struct plist_head pointer
+ */
+static inline
+void plist_add_tail(struct plist_node *node, struct plist_head *head)
+{
+	__plist_add(node, head, 0);
+}
+
+#define plist_add plist_add_tail
+
 extern void plist_del(struct plist_node *node, struct plist_head *head);
 
 extern void plist_requeue(struct plist_node *node, struct plist_head *head);
lib/plist.c +12 -3
index d408e77..0e1f1b3 100644
@@ -67,12 +67,16 @@ static void plist_check_head(struct plist_head *head)
 #endif
 
 /**
- * plist_add - add @node to @head
+ * __plist_add - add @node to @head
  *
  * @node:	&struct plist_node pointer
  * @head:	&struct plist_head pointer
+ * @is_head:	bool
+ *
+ * If there're any nodes with the same prio, add @node
+ * behind or before all of them according to @is_head.
  */
-void plist_add(struct plist_node *node, struct plist_head *head)
+void __plist_add(struct plist_node *node, struct plist_head *head, bool is_head)
 {
 	struct plist_node *first, *iter, *prev = NULL;
 	struct list_head *node_next = &head->node_list;
@@ -97,8 +101,13 @@ void plist_add(struct plist_node *node, struct plist_head *head)
 				struct plist_node, prio_list);
 	} while (iter != first);
 
-	if (!prev || prev->prio != node->prio)
+	if (!prev || prev->prio != node->prio) {
 		list_add_tail(&node->prio_list, &iter->prio_list);
+	} else if (is_head) {
+		list_add(&node->prio_list, &prev->prio_list);
+		list_del_init(&prev->prio_list);
+		node_next = &prev->node_list;
+	}
 ins_node:
 	list_add_tail(&node->node_list, node_next);
 
Signature · 1 line
1.9.1
#1 lore raw

PATCH v4 2/3 sched/rt: Fix wrong SMP scheduler behavior for equal prio cases

From: Xunlei Pang <[email protected]>

Currently, SMP RT scheduler has some trouble in dealing with equal prio cases.

For example, in check_preempt_equal_prio():
When RT1(current task) gets preempted by RT2, if there is a migratable RT3 with same prio, RT3 will be pushed away instead of RT1 afterwards, because RT1 will be enqueued to the tail of the pushable list when going through succeeding put_prev_task_rt() triggered by resched. This broke FIFO.

Furthermore, this is also problematic for normal preempted cases if there're some rt tasks queued with the same prio as current, because current will be put behind these tasks in the pushable queue.

So, if a task is running and gets preempted by a higher priority task (or even with same priority for migrating), this patch ensures that it is put before any existing task with the same priority in the pushable queue.

---
 kernel/sched/rt.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)
kernel/sched/rt.c +16 -7
index f4d4b07..65de40e 100644
@@ -347,11 +347,15 @@ static inline void set_post_schedule(struct rq *rq)
 	rq->post_schedule = has_pushable_tasks(rq);
 }
 
-static void enqueue_pushable_task(struct rq *rq, struct task_struct *p)
+static void enqueue_pushable_task(struct rq *rq,
+				struct task_struct *p, bool head)
 {
 	plist_del(&p->pushable_tasks, &rq->rt.pushable_tasks);
 	plist_node_init(&p->pushable_tasks, p->prio);
-	plist_add(&p->pushable_tasks, &rq->rt.pushable_tasks);
+	if (head)
+		plist_add_head(&p->pushable_tasks, &rq->rt.pushable_tasks);
+	else
+		plist_add_tail(&p->pushable_tasks, &rq->rt.pushable_tasks);
 
 	/* Update the highest prio pushable task */
 	if (p->prio < rq->rt.highest_prio.next)
@@ -373,7 +377,8 @@ static void dequeue_pushable_task(struct rq *rq, struct task_struct *p)
 
 #else
 
-static inline void enqueue_pushable_task(struct rq *rq, struct task_struct *p)
+static inline void enqueue_pushable_task(struct rq *rq,
+					struct task_struct *p, bool head)
 {
 }
 
@@ -1248,7 +1253,7 @@ enqueue_task_rt(struct rq *rq, struct task_struct *p, int flags)
 	enqueue_rt_entity(rt_se, flags & ENQUEUE_HEAD);
 
 	if (!task_current(rq, p) && p->nr_cpus_allowed > 1)
-		enqueue_pushable_task(rq, p);
+		enqueue_pushable_task(rq, p, 0);
 }
 
 static void dequeue_task_rt(struct rq *rq, struct task_struct *p, int flags)
@@ -1494,8 +1499,12 @@ static void put_prev_task_rt(struct rq *rq, struct task_struct *p)
 	 * The previous task needs to be made eligible for pushing
 	 * if it is still active
 	 */
-	if (on_rt_rq(&p->rt) && p->nr_cpus_allowed > 1)
-		enqueue_pushable_task(rq, p);
+	if (on_rt_rq(&p->rt) && p->nr_cpus_allowed > 1) {
+		if (task_running(rq, p) && (preempt_count() & PREEMPT_ACTIVE))
+			enqueue_pushable_task(rq, p, 1);
+		else
+			enqueue_pushable_task(rq, p, 0);
+	}
 }
 
 #ifdef CONFIG_SMP
@@ -1914,7 +1923,7 @@ static void set_cpus_allowed_rt(struct task_struct *p,
 		rq->rt.rt_nr_migratory--;
 	} else {
 		if (!task_current(rq, p))
-			enqueue_pushable_task(rq, p);
+			enqueue_pushable_task(rq, p, 0);
 		rq->rt.rt_nr_migratory++;
 	}
 
Signature · 1 line
1.9.1
#2 lore raw

Re: [PATCH v4 2/3] sched/rt: Fix wrong SMP scheduler behavior for equal prio cases

Quoted 17 lines · On Mon, 16 Feb 2015 17:32:23 +0800 Xunlei Pang <[email protected]> wrote:

From: Xunlei Pang <[email protected]>

Currently, SMP RT scheduler has some trouble in dealing with equal prio cases.

For example, in check_preempt_equal_prio():
When RT1(current task) gets preempted by RT2, if there is a migratable RT3 with same prio, RT3 will be pushed away instead of RT1 afterwards, because RT1 will be enqueued to the tail of the pushable list when going through succeeding put_prev_task_rt() triggered by resched. This broke FIFO.

Furthermore, this is also problematic for normal preempted cases if there're some rt tasks queued with the same prio as current, because current will be put behind these tasks in the pushable queue.

Quoted 6 lines

So, if a task is running and gets preempted by a higher priority task (or even with same priority for migrating), this patch ensures that it is put before any existing task with the same priority in the pushable queue.

I'd love to review this now, but unfortunately I need to get ready for my trip to Linux Collab. I'll get back to this next week. Feel free to ping me then. If I have time, I might review this while at the conference, but don't place any bets that I will.

-- Steve

#3 lore raw

PATCH v4 3/3 sched/rt: Check to push the task when changing its affinity

In reply to Xunlei Pang

From: Xunlei Pang <[email protected]>

We may suffer from extra rt overload rq due to the affinity, so when the affinity of any runnable rt task is changed, we should check to trigger balancing, otherwise it will cause some unnecessary delayed real-time response. Unfortunately, current RT global scheduler doesn't trigger anything.

For example: a 2-cpu system with two runnable FIFO tasks(same rt_priority) bound on CPU0, let's name them rt1(running) and rt2(runnable) respectively; CPU1 has no RTs. Then, someone sets the affinity of rt2 to 0x3(i.e. CPU0 and CPU1), but after this, rt2 still can't be scheduled until rt1 enters schedule(), this definitely causes some/big response latency for rt2.

So, when doing set_cpus_allowed_rt(), if detecting such cases, check to trigger a push behaviour.

---
 kernel/sched/rt.c | 78 ++++++++++++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 68 insertions(+), 10 deletions(-)
kernel/sched/rt.c +68 -10
index 65de40e..2637e23 100644
@@ -1433,10 +1433,9 @@ static struct sched_rt_entity *pick_next_rt_entity(struct rq *rq,
 	return next;
 }
 
-static struct task_struct *_pick_next_task_rt(struct rq *rq)
+static struct task_struct *peek_next_task_rt(struct rq *rq)
 {
 	struct sched_rt_entity *rt_se;
-	struct task_struct *p;
 	struct rt_rq *rt_rq  = &rq->rt;
 
 	do {
@@ -1445,7 +1444,14 @@ static struct task_struct *_pick_next_task_rt(struct rq *rq)
 		rt_rq = group_rt_rq(rt_se);
 	} while (rt_rq);
 
-	p = rt_task_of(rt_se);
+	return rt_task_of(rt_se);
+}
+
+static inline struct task_struct *_pick_next_task_rt(struct rq *rq)
+{
+	struct task_struct *p;
+
+	p = peek_next_task_rt(rq);
 	p->se.exec_start = rq_clock_task(rq);
 
 	return p;
@@ -1895,28 +1901,74 @@ static void set_cpus_allowed_rt(struct task_struct *p,
 				const struct cpumask *new_mask)
 {
 	struct rq *rq;
-	int weight;
+	int old_weight, new_weight;
+	int preempt_push = 0, direct_push = 0;
 
 	BUG_ON(!rt_task(p));
 
 	if (!task_on_rq_queued(p))
 		return;
 
-	weight = cpumask_weight(new_mask);
+	old_weight = p->nr_cpus_allowed;
+	new_weight = cpumask_weight(new_mask);
+
+	rq = task_rq(p);
+
+	if (new_weight > 1 &&
+	    rt_task(rq->curr) &&
+	    !test_tsk_need_resched(rq->curr)) {
+		/*
+		 * We own p->pi_lock and rq->lock. rq->lock might
+		 * get released when doing direct pushing, however
+		 * p->pi_lock is always held, so it's safe to assign
+		 * the new_mask and new_weight to p below.
+		 */
+		if (!task_running(rq, p)) {
+			cpumask_copy(&p->cpus_allowed, new_mask);
+			p->nr_cpus_allowed = new_weight;
+			direct_push = 1;
+		} else if (cpumask_test_cpu(task_cpu(p), new_mask)) {
+			cpumask_copy(&p->cpus_allowed, new_mask);
+			p->nr_cpus_allowed = new_weight;
+			if (!cpupri_find(&rq->rd->cpupri, p, NULL))
+				goto update;
+
+			/*
+			 * At this point, current task gets migratable most
+			 * likely due to the change of its affinity, let's
+			 * figure out if we can migrate it.
+			 *
+			 * Is there any task with the same priority as that
+			 * of current task? If found one, we should resched.
+			 * NOTE: The target may be unpushable.
+			 */
+			if (p->prio == rq->rt.highest_prio.next) {
+				/* One target just in pushable_tasks list. */
+				requeue_task_rt(rq, p, 0);
+				preempt_push = 1;
+			} else if (rq->rt.rt_nr_total > 1) {
+				struct task_struct *next;
+
+				requeue_task_rt(rq, p, 0);
+				next = peek_next_task_rt(rq);
+				if (next != p && next->prio == p->prio)
+					preempt_push = 1;
+			}
+		}
+	}
 
+update:
 	/*
 	 * Only update if the process changes its state from whether it
 	 * can migrate or not.
 	 */
-	if ((p->nr_cpus_allowed > 1) == (weight > 1))
-		return;
-
-	rq = task_rq(p);
+	if ((old_weight > 1) == (new_weight > 1))
+		goto out;
 
 	/*
 	 * The process used to be able to migrate OR it can now migrate
 	 */
-	if (weight <= 1) {
+	if (new_weight <= 1) {
 		if (!task_current(rq, p))
 			dequeue_pushable_task(rq, p);
 		BUG_ON(!rq->rt.rt_nr_migratory);
@@ -1928,6 +1980,12 @@ static void set_cpus_allowed_rt(struct task_struct *p,
 	}
 
 	update_rt_migration(&rq->rt);
+
+out:
+	if (direct_push)
+		push_rt_tasks(rq);
+	else if (preempt_push)
+		resched_curr(rq);
 }
 
 /* Assumes rq->lock is held */
Signature · 1 line
1.9.1
#4 lore raw
In reply to Xunlei Pang
Quoted 31 lines · On Mon, 16 Feb 2015 17:32:22 +0800 Xunlei Pang <[email protected]> wrote:

From: Xunlei Pang <[email protected]>

If there're multiple nodes with the same prio as @node, currently plist_add() will add @node behind all of them. Now we need to add @node before all of these nodes for SMP RT scheduler.

This patch adds a common __plist_add() for adding @node before or behind existing nodes with the same prio, then adds plist_add_head() and plist_add_tail() inline wrapper functions for convenient uses.

Finally, define plist_add() with plist_add_tail() which has the same behaviour as before.

---
 include/linux/plist.h | 30 +++++++++++++++++++++++++++++-
 lib/plist.c           | 15 ++++++++++++---
 2 files changed, 41 insertions(+), 4 deletions(-)
include/linux/plist.h +3 -1
index 9788360..e17bb96 100644
@@ -138,7 +138,35 @@ static inline void plist_node_init(struct plist_node *node, int prio)
 	INIT_LIST_HEAD(&node->node_list);
 }
 
-extern void plist_add(struct plist_node *node, struct plist_head *head);
+extern void __plist_add(struct plist_node *node,
+				struct plist_head *head, bool is_head);
+

include/linux/plist.h static inline void plist_node_init(struct plist_node *node, int prio) · line 153

Quoted 10 lines
include/linux/plist.h +10 -0
+/**
+ * plist_add_head - add @node to @head, before all existing same-prio nodes
+ *
+ * @node:	&struct plist_node pointer
+ * @head:	&struct plist_head pointer
+ */
+static inline
+void plist_add_head(struct plist_node *node, struct plist_head *head)
+{
+	__plist_add(node, head, 1);

is_head is boolean, shouldn't that be "true" instead of "1".

include/linux/plist.h static inline void plist_node_init(struct plist_node *node, int prio) · line 165

Quoted 12 lines
include/linux/plist.h +12 -0
+}
+
+/**
+ * plist_add_tail - add @node to @head, after all existing same-prio nodes
+ *
+ * @node:	&struct plist_node pointer
+ * @head:	&struct plist_head pointer
+ */
+static inline
+void plist_add_tail(struct plist_node *node, struct plist_head *head)
+{
+	__plist_add(node, head, 0);

And "false" here.

Quoted 31 lines
include/linux/plist.h +4 -0
+}
+
+#define plist_add plist_add_tail
+
 extern void plist_del(struct plist_node *node, struct plist_head *head);
 
 extern void plist_requeue(struct plist_node *node, struct plist_head *head);
lib/plist.c +6 -2
index d408e77..0e1f1b3 100644
@@ -67,12 +67,16 @@ static void plist_check_head(struct plist_head *head)
 #endif
 
 /**
- * plist_add - add @node to @head
+ * __plist_add - add @node to @head
  *
  * @node:	&struct plist_node pointer
  * @head:	&struct plist_head pointer
+ * @is_head:	bool
+ *
+ * If there're any nodes with the same prio, add @node
+ * behind or before all of them according to @is_head.
  */
-void plist_add(struct plist_node *node, struct plist_head *head)
+void __plist_add(struct plist_node *node, struct plist_head *head, bool is_head)
 {
 	struct plist_node *first, *iter, *prev = NULL;
 	struct list_head *node_next = &head->node_list;

lib/plist.c void plist_add(struct plist_node *node, struct plist_head *head) · line 109

Quoted 10 lines
lib/plist.c +5 -1
@@ -97,8 +101,13 @@ void plist_add(struct plist_node *node, struct plist_head *head)
 				struct plist_node, prio_list);
 	} while (iter != first);
 
-	if (!prev || prev->prio != node->prio)
+	if (!prev || prev->prio != node->prio) {
 		list_add_tail(&node->prio_list, &iter->prio_list);
+	} else if (is_head) {
+		list_add(&node->prio_list, &prev->prio_list);
+		list_del_init(&prev->prio_list);
+		node_next = &prev->node_list;

The above could use some comments. I would say the entire plist code could use more comments, but that's out of scope with this series. But at least lets add comments when adding new code. Something like:

} else if (is_head) {
/*
* prev has the same priority as the node that is
* being added. It is also the first node for this
* priority, but the new node needs to be added ahead of
* it. To accomplish this, insert node right after prev
* in the prio_list and then remove prev from that list.
* Then set node_next to prev->node_list so that the
* new node gets added before prev and not iter. */

Something like that, because it took me some time to figure out how plist works. It's one of those algorithms that seem to page fault out quickly, and takes some time to page fault back into one's mind.

-- Steve

Quoted 4 lines
lib/plist.c +1 -0
+	}
 ins_node:
 	list_add_tail(&node->node_list, node_next);