Staging: fbtft: fix whitespace errors
Subsystems (2)
PATCH 1/1 Staging: fbtft: fix whitespace errors
From: Matteo Semenzato <[email protected]>
This patch fixes the following errors:
ERROR: space required after that ','
ERROR: trailing whitespace
Signed-off-by Matteo Semenzato <[email protected]>
--- drivers/staging/fbtft/fb_st7735r.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/staging/fbtft/fb_st7735r.c +9 -9
@@ -31,20 +31,20 @@static int default_init_sequence[] = {/* SWRESET - Software reset */ --1 ,0x01 , +-1 ,0x01 ,-2 ,150 ,/* delay */ /* SLPOUT - Sleep out & booster on */ --1 ,0x11 , +-1 ,0x11 ,-2 ,500 ,/* delay */ /* FRMCTR1 - frame rate control: normal mode frame rate = fosc / (1 x 2 + 40) * (LINE + 2C + 2D) */ --1 ,0xB1 ,0x01 ,0x2C ,0x2D , +-1 ,0xB1 ,0x01 ,0x2C ,0x2D ,/* FRMCTR2 - frame rate control: idle mode frame rate = fosc / (1 x 2 + 40) * (LINE + 2C + 2D) */ --1 ,0xB2 ,0x01 ,0x2C ,0x2D , +-1 ,0xB2 ,0x01 ,0x2C ,0x2D ,/* FRMCTR3 - frame rate control - partial mode dot inversion mode, line inversion mode */
@@ -68,7 +68,7 @@ static int default_init_sequence[] = {/* PWCTR4 - Power Control BCLK/2, Opamp current small & Medium low */ --1 ,0xC3 ,0x8A ,0x2A , +-1 ,0xC3 ,0x8A ,0x2A ,/* PWCTR5 - Power Control */ -1, 0xC4, 0x8A, 0xEE,
@@ -91,7 +91,7 @@ static int default_init_sequence[] = {-2 ,10 ,/* delay */ /* end marker */ - -3 + -3 };static void set_addr_win (struct fbtft_par *par,int xs,int ys,int xe,int ye)
@@ -148,21 +148,21 @@ static int set_var(struct fbtft_par *par)#define CURVE (num, idx) curves[num*par->gamma.num_values + idx]static int set_gamma (struct fbtft_par *par,unsigned long *curves) { -int i,j; +int i, j;fbtft_par_dbg (DEBUG_INIT_DISPLAY , par,"%s()\n" , __func__);/* apply mask */ for (i =0 ; i < par->gamma.num_curves; i++)for (j =0 ; j < par->gamma.num_values; j++) -CURVE (i,j) &=0b111111 ; +CURVE (i, j) &=0b111111 ;for (i =0 ; i < par->gamma.num_curves; i++)write_reg (par,0xE0 + i,CURVE (i,0 ),CURVE (i,1 ),CURVE (i,2 ),CURVE (i,3 ),CURVE (i,4 ),CURVE (i,5 ),CURVE (i,6 ),CURVE (i,7 ),CURVE (i,8 ),CURVE (i,9 ),CURVE (i,10 ),CURVE (i,11 ), -CURVE (i,12 ),CURVE (i,13 ),CURVE (i,14 ),CURVE (i,15 )); +CURVE (i,12 ),CURVE (i,13 ),CURVE (i,14 ),CURVE (i,15 ));return 0 ; }
Signature · 1 line
2.3.0
Quoted 7 lines · Matteo Semenzato
From: Matteo Semenzato <[email protected]>
This patch fixes the following errors:
ERROR: space required after that ','
ERROR: trailing whitespaceSigned-off-by Matteo Semenzato <[email protected]>
checkpatch complains - ERROR: Missing Signed-off-by: line(s)
regards
sudip
Quoted 1 line
---
From: Matteo Semenzato <[email protected]>
This patch fixes the following errors:
ERROR: space required after that ','
ERROR: trailing whitespace
--- drivers/staging/fbtft/fb_st7735r.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/staging/fbtft/fb_st7735r.c +9 -9
@@ -31,20 +31,20 @@static int default_init_sequence[] = {/* SWRESET - Software reset */ --1 ,0x01 , +-1 ,0x01 ,-2 ,150 ,/* delay */ /* SLPOUT - Sleep out & booster on */ --1 ,0x11 , +-1 ,0x11 ,-2 ,500 ,/* delay */ /* FRMCTR1 - frame rate control: normal mode frame rate = fosc / (1 x 2 + 40) * (LINE + 2C + 2D) */ --1 ,0xB1 ,0x01 ,0x2C ,0x2D , +-1 ,0xB1 ,0x01 ,0x2C ,0x2D ,/* FRMCTR2 - frame rate control: idle mode frame rate = fosc / (1 x 2 + 40) * (LINE + 2C + 2D) */ --1 ,0xB2 ,0x01 ,0x2C ,0x2D , +-1 ,0xB2 ,0x01 ,0x2C ,0x2D ,/* FRMCTR3 - frame rate control - partial mode dot inversion mode, line inversion mode */
@@ -68,7 +68,7 @@ static int default_init_sequence[] = {/* PWCTR4 - Power Control BCLK/2, Opamp current small & Medium low */ --1 ,0xC3 ,0x8A ,0x2A , +-1 ,0xC3 ,0x8A ,0x2A ,/* PWCTR5 - Power Control */ -1, 0xC4, 0x8A, 0xEE,
@@ -91,7 +91,7 @@ static int default_init_sequence[] = {-2 ,10 ,/* delay */ /* end marker */ - -3 + -3 };static void set_addr_win (struct fbtft_par *par,int xs,int ys,int xe,int ye)
@@ -148,21 +148,21 @@ static int set_var(struct fbtft_par *par)#define CURVE (num, idx) curves[num*par->gamma.num_values + idx]static int set_gamma (struct fbtft_par *par,unsigned long *curves) { -int i,j; +int i, j;fbtft_par_dbg (DEBUG_INIT_DISPLAY , par,"%s()\n" , __func__);/* apply mask */ for (i =0 ; i < par->gamma.num_curves; i++)for (j =0 ; j < par->gamma.num_values; j++) -CURVE (i,j) &=0b111111 ; +CURVE (i, j) &=0b111111 ;for (i =0 ; i < par->gamma.num_curves; i++)write_reg (par,0xE0 + i,CURVE (i,0 ),CURVE (i,1 ),CURVE (i,2 ),CURVE (i,3 ),CURVE (i,4 ),CURVE (i,5 ),CURVE (i,6 ),CURVE (i,7 ),CURVE (i,8 ),CURVE (i,9 ),CURVE (i,10 ),CURVE (i,11 ), -CURVE (i,12 ),CURVE (i,13 ),CURVE (i,14 ),CURVE (i,15 )); +CURVE (i,12 ),CURVE (i,13 ),CURVE (i,14 ),CURVE (i,15 ));return 0 ; }
Signature · 1 line
2.3.0
Greg KH
maintainerQuoted 10 lines · Matteo Semenzato
From: Matteo Semenzato <[email protected]>
This patch fixes the following errors:
ERROR: space required after that ','
ERROR: trailing whitespaceSigned-off-by Matteo Semenzato <[email protected]>--- drivers/staging/fbtft/fb_st7735r.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
Doesn't apply to my tree :(
PATCH v2 1/1 Staging: fbtft: fix whitespace errors
In reply to Matteo SemenzatoFrom: Matteo Semenzato <[email protected]>
This patch fixes the following errors:
ERROR: space required after that ','
ERROR: trailing whitespace
ERROR: code indent should use tabs where possible
V2: The patch should apply now
--- drivers/staging/fbtft/fb_st7735r.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
drivers/staging/fbtft/fb_st7735r.c +12 -12
@@ -26,25 +26,25 @@#define DRVNAME "fb_st7735r"#define DEFAULT_GAMMA "0F 1A 0F 18 2F 28 20 22 1F 1B 23 37 00 07 02 10\n" \ - "0F 1B 0F 17 33 2C 29 2E 30 30 39 3F 00 07 03 10" + "0F 1B 0F 17 33 2C 29 2E 30 30 39 3F 00 07 03 10"static int default_init_sequence[] = {/* SWRESET - Software reset */ --1 ,0x01 , +-1 ,0x01 ,-2 ,150 ,/* delay */ /* SLPOUT - Sleep out & booster on */ --1 ,0x11 , +-1 ,0x11 ,-2 ,500 ,/* delay */ /* FRMCTR1 - frame rate control: normal mode frame rate = fosc / (1 x 2 + 40) * (LINE + 2C + 2D) */ --1 ,0xB1 ,0x01 ,0x2C ,0x2D , +-1 ,0xB1 ,0x01 ,0x2C ,0x2D ,/* FRMCTR2 - frame rate control: idle mode frame rate = fosc / (1 x 2 + 40) * (LINE + 2C + 2D) */ --1 ,0xB2 ,0x01 ,0x2C ,0x2D , +-1 ,0xB2 ,0x01 ,0x2C ,0x2D ,/* FRMCTR3 - frame rate control - partial mode dot inversion mode, line inversion mode */
@@ -68,7 +68,7 @@ static int default_init_sequence[] = {/* PWCTR4 - Power Control BCLK/2, Opamp current small & Medium low */ --1 ,0xC3 ,0x8A ,0x2A , +-1 ,0xC3 ,0x8A ,0x2A ,/* PWCTR5 - Power Control */ -1, 0xC4, 0x8A, 0xEE,
@@ -91,7 +91,7 @@ static int default_init_sequence[] = {-2 ,10 ,/* delay */ /* end marker */ - -3 + -3 };static void set_addr_win (struct fbtft_par *par,int xs,int ys,int xe,int ye)
@@ -119,9 +119,9 @@ static int set_var(struct fbtft_par *par)/* MADCTL - Memory data access control RGB/BGR: 1. Mode selection pin SRGB -RGB H/W pin for color filter setting: 0=RGB, 1=BGR +RGB H/W pin for color filter setting: 0=RGB, 1=BGR 2. MADCTL RGB bit -RGB-BGR ORDER color filter panel: 0=RGB, 1=BGR */ +RGB-BGR ORDER color filter panel: 0=RGB, 1=BGR */ switch (par->info->var.rotate) {case 0 :write_reg (par,0x36 ,MX |MY | (par->bgr <<3 ));
@@ -148,21 +148,21 @@ static int set_var(struct fbtft_par *par)#define CURVE (num, idx) curves[num*par->gamma.num_values + idx]static int set_gamma (struct fbtft_par *par,unsigned long *curves) { -int i,j; +int i, j;fbtft_par_dbg (DEBUG_INIT_DISPLAY , par,"%s()\n" , __func__);/* apply mask */ for (i =0 ; i < par->gamma.num_curves; i++)for (j =0 ; j < par->gamma.num_values; j++) -CURVE (i,j) &=0b111111 ; +CURVE (i, j) &=0b111111 ;for (i =0 ; i < par->gamma.num_curves; i++)write_reg (par,0xE0 + i,CURVE (i,0 ),CURVE (i,1 ),CURVE (i,2 ),CURVE (i,3 ),CURVE (i,4 ),CURVE (i,5 ),CURVE (i,6 ),CURVE (i,7 ),CURVE (i,8 ),CURVE (i,9 ),CURVE (i,10 ),CURVE (i,11 ), -CURVE (i,12 ),CURVE (i,13 ),CURVE (i,14 ),CURVE (i,15 )); +CURVE (i,12 ),CURVE (i,13 ),CURVE (i,14 ),CURVE (i,15 ));return 0 ; }
Signature · 1 line
2.3.1