Skip to contentSkip to conversation

ucm: document some standard values

PATCH Applied [email protected] 2 participants 4 messages Mar 5, 2015

lore
Share & tools
lore

[email protected]

author
#0 lore raw

PATCH v2 1/2 ucm: document some standard values

From: "Lu, Han" <[email protected]>

add standard value JackDev, JackControl and JackHWMute for speaker mute control on jack insertion. These values will be applied on pulseaudio.

Signed-off-by Lu, Han <[email protected]>
include/use-case.h +4 -0
index 697377a..3728906 100644
@@ -284,6 +284,10 @@ int snd_use_case_get_list(snd_use_case_mgr_t *uc_mgr,
  *   PlaybackMixerID	- mixer playback ID
  *   CaptureMixer	- name of capture mixer
  *   CaptureMixerID	- mixer capture ID
+ *   JackDev		- jack device name
+ *   JackControl	- jack control name
+ *   JackHWMute		- indicate if the HW mutes a device on jack insertion
+ *			  or not.
  */
 int snd_use_case_get(snd_use_case_mgr_t *uc_mgr,
                      const char *identifier,
Signature · 1 line
2.1.0
author
#1 lore raw

PATCH v2 2/2 conf/ucm: broadwell-rt286: add ucm config

From: "Bard Liao" <[email protected]>

The configure should apply to all Broadwell-rt286 boards from Intel, like Wilson Beach SDS Ultrabook.

Signed-off-by Lu, Han <[email protected]>
src/conf/ucm/broadwell-rt286/HiFi new file +128 -0
new file mode 100644
index 0000000..08f5c50
@@ -0,0 +1,128 @@
+# Use case Configuration for Nexus 7
+# Adapted to Ubuntu Touch by David Henningsson <[email protected]>
+
+SectionVerb {
+
+	EnableSequence [
+	]
+
+	DisableSequence [
+	]
+
+	# ALSA PCM
+	Value {
+		# ALSA PCM device for HiFi
+		PlaybackPCM "hw:broadwellrt286"
+		CapturePCM "hw:broadwellrt286"
+	}
+}
+
+SectionDevice."Headphones" {
+	Comment "Headphones playback"
+
+	ConflictingDevice [
+		"Speaker"
+	]
+
+	EnableSequence [
+		cdev "hw:broadwellrt286"
+		cset "name='Master Playback Volume' 30"
+		cset "name='HPO L Switch' on"
+		cset "name='HPO R Switch' on"
+		cset "name='Headphone Jack Switch' on"
+		cset "name='DAC0 Playback Volume' 100"
+	]
+
+	DisableSequence [
+		cdev "hw:broadwellrt286"
+		cset "name='Headphone Jack Switch' off"
+		cset "name='HPO L Switch' off"
+		cset "name='HPO R Switch' off"
+	]
+
+	Value {
+		PlaybackChannels "2"
+		JackDev "rt286-jack"
+		JackControl "Headset Jack"
+		JackHWMute "Speaker"
+	}
+}
+
+SectionDevice."Speaker" {
+	Comment "Speaker playback"
+
+	ConflictingDevice [
+		"Headphones"
+	]
+
+	EnableSequence [
+		cdev "hw:broadwellrt286"
+		cset "name='Master Playback Volume' 30"
+		cset "name='DAC0 Playback Volume' 127"
+		cset "name='SPO Switch' on"
+		cset "name='Speaker Playback Switch' on"
+		cset "name='Speaker Switch' on"
+	]
+
+	DisableSequence [
+		cdev "hw:broadwellrt286"
+		cset "name='Speaker Switch' off"
+		cset "name='Speaker Playback Switch' off"
+		cset "name='SPO Switch' 0"
+	]
+
+	Value {
+		PlaybackChannels "2"
+	}
+}
+
+SectionDevice."Handset" {
+	Comment "Handset Microphone"
+
+	ConflictingDevice [
+		"Mainmic"
+	]
+
+	EnableSequence [
+		cdev "hw:broadwellrt286"
+
+		cset "name='ADC 0 Mux' 0"
+		cset "name='ADC0 Capture Switch' on"
+		cset "name='ADC0 Capture Volume' 127"
+		cset "name='AMIC Volume' 1"
+	]
+
+	DisableSequence [
+		cdev "hw:broadwellrt286"
+		cset "name='ADC0 Capture Switch' off"
+	]
+
+	Value {
+		CaptureChannels "2"
+	}
+}
+
+SectionDevice."Mainmic" {
+	Comment "Main Microphone"
+
+	ConflictingDevice [
+		"Handset"
+	]
+
+	EnableSequence [
+		cdev "hw:broadwellrt286"
+
+		cset "name='ADC 0 Mux' 2"
+		cset "name='ADC0 Capture Switch' on"
+		cset "name='ADC0 Capture Volume' 127"
+	]
+
+	DisableSequence [
+		cdev "hw:broadwellrt286"
+		cset "name='ADC0 Capture Switch' off"
+	]
+
+	Value {
+		CaptureChannels "2"
+	}
+}
src/conf/ucm/broadwell-rt286/broadwell-rt286.conf new file +8 -0
new file mode 100644
index 0000000..4a176cd
@@ -0,0 +1,8 @@
+SectionUseCase."HiFi" {
+	File "HiFi"
+	Comment "Play HiFi quality Music"
+}
+
+SectionDefaults [
+	cdev "hw:broadwellrt286"
+]
Signature · 1 line
2.1.0
Applied
#3 lore raw
In reply to [email protected]

At Thu, 5 Mar 2015 08:38:54 +0800,

Quoted 8 lines · [email protected] wrote:

From: "Lu, Han" <[email protected]>

add standard value JackDev, JackControl and JackHWMute for speaker mute control on jack insertion. These values will be applied on pulseaudio.

Signed-off-by Lu, Han <[email protected]>

Applied, thanks.

Takashi

Quoted 24 lines
include/use-case.h +4 -0
index 697377a..3728906 100644
@@ -284,6 +284,10 @@ int snd_use_case_get_list(snd_use_case_mgr_t *uc_mgr,
  *   PlaybackMixerID	- mixer playback ID
  *   CaptureMixer	- name of capture mixer
  *   CaptureMixerID	- mixer capture ID
+ *   JackDev		- jack device name
+ *   JackControl	- jack control name
+ *   JackHWMute		- indicate if the HW mutes a device on jack insertion
+ *			  or not.
  */
 int snd_use_case_get(snd_use_case_mgr_t *uc_mgr,
                      const char *identifier,
Signature · 6 lines
2.1.0

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Applied
#2 lore raw

Re: [PATCH v2 2/2] conf/ucm: broadwell-rt286: add ucm config

In reply to [email protected]

At Thu, 5 Mar 2015 08:38:55 +0800,

Quoted 7 lines · [email protected] wrote:

From: "Bard Liao" <[email protected]>

The configure should apply to all Broadwell-rt286 boards from Intel, like Wilson Beach SDS Ultrabook.

Signed-off-by Lu, Han <[email protected]>

Applied, thanks.

But, Makefile and autoconf change are missing. I fixed it manually.

Takashi

Quoted 157 lines
src/conf/ucm/broadwell-rt286/HiFi new file +128 -0
new file mode 100644
index 0000000..08f5c50
@@ -0,0 +1,128 @@
+# Use case Configuration for Nexus 7
+# Adapted to Ubuntu Touch by David Henningsson <[email protected]>
+
+SectionVerb {
+
+	EnableSequence [
+	]
+
+	DisableSequence [
+	]
+
+	# ALSA PCM
+	Value {
+		# ALSA PCM device for HiFi
+		PlaybackPCM "hw:broadwellrt286"
+		CapturePCM "hw:broadwellrt286"
+	}
+}
+
+SectionDevice."Headphones" {
+	Comment "Headphones playback"
+
+	ConflictingDevice [
+		"Speaker"
+	]
+
+	EnableSequence [
+		cdev "hw:broadwellrt286"
+		cset "name='Master Playback Volume' 30"
+		cset "name='HPO L Switch' on"
+		cset "name='HPO R Switch' on"
+		cset "name='Headphone Jack Switch' on"
+		cset "name='DAC0 Playback Volume' 100"
+	]
+
+	DisableSequence [
+		cdev "hw:broadwellrt286"
+		cset "name='Headphone Jack Switch' off"
+		cset "name='HPO L Switch' off"
+		cset "name='HPO R Switch' off"
+	]
+
+	Value {
+		PlaybackChannels "2"
+		JackDev "rt286-jack"
+		JackControl "Headset Jack"
+		JackHWMute "Speaker"
+	}
+}
+
+SectionDevice."Speaker" {
+	Comment "Speaker playback"
+
+	ConflictingDevice [
+		"Headphones"
+	]
+
+	EnableSequence [
+		cdev "hw:broadwellrt286"
+		cset "name='Master Playback Volume' 30"
+		cset "name='DAC0 Playback Volume' 127"
+		cset "name='SPO Switch' on"
+		cset "name='Speaker Playback Switch' on"
+		cset "name='Speaker Switch' on"
+	]
+
+	DisableSequence [
+		cdev "hw:broadwellrt286"
+		cset "name='Speaker Switch' off"
+		cset "name='Speaker Playback Switch' off"
+		cset "name='SPO Switch' 0"
+	]
+
+	Value {
+		PlaybackChannels "2"
+	}
+}
+
+SectionDevice."Handset" {
+	Comment "Handset Microphone"
+
+	ConflictingDevice [
+		"Mainmic"
+	]
+
+	EnableSequence [
+		cdev "hw:broadwellrt286"
+
+		cset "name='ADC 0 Mux' 0"
+		cset "name='ADC0 Capture Switch' on"
+		cset "name='ADC0 Capture Volume' 127"
+		cset "name='AMIC Volume' 1"
+	]
+
+	DisableSequence [
+		cdev "hw:broadwellrt286"
+		cset "name='ADC0 Capture Switch' off"
+	]
+
+	Value {
+		CaptureChannels "2"
+	}
+}
+
+SectionDevice."Mainmic" {
+	Comment "Main Microphone"
+
+	ConflictingDevice [
+		"Handset"
+	]
+
+	EnableSequence [
+		cdev "hw:broadwellrt286"
+
+		cset "name='ADC 0 Mux' 2"
+		cset "name='ADC0 Capture Switch' on"
+		cset "name='ADC0 Capture Volume' 127"
+	]
+
+	DisableSequence [
+		cdev "hw:broadwellrt286"
+		cset "name='ADC0 Capture Switch' off"
+	]
+
+	Value {
+		CaptureChannels "2"
+	}
+}
src/conf/ucm/broadwell-rt286/broadwell-rt286.conf new file +8 -0
new file mode 100644
index 0000000..4a176cd
@@ -0,0 +1,8 @@
+SectionUseCase."HiFi" {
+	File "HiFi"
+	Comment "Play HiFi quality Music"
+}
+
+SectionDefaults [
+	cdev "hw:broadwellrt286"
+]
Signature · 6 lines
2.1.0

_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel