Skip to contentSkip to conversation

Append recipe LICENCE checksum problem

DISCUSSION p_j_r_m 2 participants 3 messages Mar 5, 2015

lore
Share & tools
lore

p_j_r_m

author
#0 lore raw

I have a layer meta-mycompany where i want to append to the grub_2.00 recipe placed at openembedded-core layer just to add my custom grub.cfg file. Also, I see there is ALREADY a grub-2.00.bbappend file in my BSP layer (meta-montavista-1.4).My layer has highest priority.

So I wrote a recipe called grub-2.00.bbappend like this in my layer:

FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
SRC_URI = "file://grub${MYBOARD}.cfg "
FILES_${PN}_append = "${base_prefix}/boot"

do_install_append() {
if [ ! -d ${D}${base_prefix}/boot/grub ]
then

     install -m 0755 -d ${S}${base_prefix}/boot/grub ${D}${base_prefix}/boot/grub

fi
install -m 0755 ${WORKDIR}/grub${MYBOARD}.cfg ${D}${base_prefix}/boot/grub/grub.cfg
}

$MYBOARD is a custom name just to pick up the proper grub file for each platform.

But when i do a "bitbake grub" I get:

NOTE: Executing RunQueue Tasks
ERROR: Function failed: grub: LIC_FILES_CHKSUM points to an invalid file: /opt/work/tmp/work/x86_64-montavista-linux/grub/2.00-r1.2.2/grub-2.00/COPYING
ERROR: Logfile of failure stored in: /opt/work/tmp/work/x86_64-montavista-linux/grub/2.00-r1.2.2/temp/log.do_configure.628
Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
...
| DEBUG: Python function do_qa_configure finished
| ERROR: Function failed: grub: LIC_FILES_CHKSUM points to an invalid file: /opt/work/tmp/work/x86_64-montavista-linux/grub/2.00-r1.2.2/grub-2.00/COPYING
ERROR: Task 5 (/opt/work/tmp/layers/openembedded-core-1.4-1411101352/openembedded-core-1.4-1411101352/meta/recipes-bsp/grub/grub_2.00.bb, do_configure) failed with exit code '1'

If i take my layer out of my conf/extra-layers.conf ,recipe builds ok.

My layer is:

releases

├── meta-mycompany
│   ├── conf
│   │   └── layer.conf
│   ├── README
│   ├── recipes
│       ├── grub
│       │   ├── files
│       │   │   ├── grubatca.cfg
│       │   │   └── grubmni.cfg
│       │   └── grub_2.00.bbappend
│       ├── images
│          ├── mycompany-atca-image.bb
│          └── mycompany-atca-image-buildcf.bb
├── meta-mycompany.tar.bz2
├── meta-mycompany.tar.bz2.md5

Do you know what is the problem?
Must an .append recipe also provide a LICENCE file? Where?

Thank you

#1 lore raw
Quoted 7 lines · p_j_r_m

I have a layer meta-mycompany where i want to append to the grub_2.00 recipe placed at openembedded-core layer just to add my custom grub.cfg file. Also, I see there is ALREADY a grub-2.00.bbappend file in my BSP layer (meta-montavista-1.4).My layer has highest priority.

So I wrote a recipe called grub-2.00.bbappend like this in my layer:

FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
SRC_URI = "file://grub${MYBOARD}.cfg "

You are overwriting the SRC_URI rather than appending to it. So my guess is that the source isn't getting fetched, which is why it says it can't find the license file.

Quoted 50 lines

FILES_${PN}_append = "${base_prefix}/boot"

do_install_append() {
   if [ ! -d ${D}${base_prefix}/boot/grub ]
   then
      install -m 0755 -d ${S}${base_prefix}/boot/grub ${D}${base_prefix}/boot/grub
   fi
   install -m 0755 ${WORKDIR}/grub${MYBOARD}.cfg ${D}${base_prefix}/boot/grub/grub.cfg
}

$MYBOARD is a custom name just to pick up the proper grub file for each platform.

But when i do a "bitbake grub" I get:

NOTE: Executing RunQueue Tasks
ERROR: Function failed: grub: LIC_FILES_CHKSUM points to an invalid file: /opt/work/tmp/work/x86_64-montavista-linux/grub/2.00-r1.2.2/grub-2.00/COPYING
ERROR: Logfile of failure stored in: /opt/work/tmp/work/x86_64-montavista-linux/grub/2.00-r1.2.2/temp/log.do_configure.628
Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
...
| DEBUG: Python function do_qa_configure finished
| ERROR: Function failed: grub: LIC_FILES_CHKSUM points to an invalid file: /opt/work/tmp/work/x86_64-montavista-linux/grub/2.00-r1.2.2/grub-2.00/COPYING
ERROR: Task 5 (/opt/work/tmp/layers/openembedded-core-1.4-1411101352/openembedded-core-1.4-1411101352/meta/recipes-bsp/grub/grub_2.00.bb, do_configure) failed with exit code '1'

If i take my layer out of my conf/extra-layers.conf ,recipe builds ok.

My layer is:

releases

├── meta-mycompany
│   ├── conf
│   │   └── layer.conf
│   ├── README
│   ├── recipes
│       ├── grub
│       │   ├── files
│       │   │   ├── grubatca.cfg
│       │   │   └── grubmni.cfg
│       │   └── grub_2.00.bbappend
│       ├── images
│          ├── mycompany-atca-image.bb
│          └── mycompany-atca-image-buildcf.bb
├── meta-mycompany.tar.bz2
├── meta-mycompany.tar.bz2.md5

Do you know what is the problem?
Must an .append recipe also provide a LICENCE file? Where?

Thank you

author
#2 lore raw
Quoted 3 lines

You are overwriting the SRC_URI rather than appending to it. So my guess is that the source isn't getting fetched, which is why it says it can't find the license file.

I´ve change that to SRC_URI_append, but it had no effect and it still fails.
My recipe is an .bbappend to a grub recipe, and it has no sources. Should it have a source with a LICENCE file?

El Jueves 5 de marzo de 2015 21:53, Randy Witt <[email protected]> escribió:

Quoted 7 lines · p_j_r_m

I have a layer meta-mycompany where i want to append to the grub_2.00 recipe placed at openembedded-core layer just to add my custom grub.cfg file. Also, I see there is ALREADY a grub-2.00.bbappend file in my BSP layer (meta-montavista-1.4).My layer has highest priority.

So I wrote a recipe called grub-2.00.bbappend like this in my layer:

FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
SRC_URI = "file://grub${MYBOARD}.cfg "

You are overwriting the SRC_URI rather than appending to it. So my guess is that the source isn't getting fetched, which is why it says it can't find the license file.

Quoted 50 lines

FILES_${PN}_append = "${base_prefix}/boot"

do_install_append() {
    if [ ! -d ${D}${base_prefix}/boot/grub ]
    then
      install -m 0755 -d ${S}${base_prefix}/boot/grub ${D}${base_prefix}/boot/grub fi
    install -m 0755 ${WORKDIR}/grub${MYBOARD}.cfg ${D}${base_prefix}/boot/grub/grub.cfg }

$MYBOARD is a custom name just to pick up the proper grub file for each platform.

But when i do a "bitbake grub" I get:

NOTE: Executing RunQueue Tasks
ERROR: Function failed: grub: LIC_FILES_CHKSUM points to an invalid file: /opt/work/tmp/work/x86_64-montavista-linux/grub/2.00-r1.2.2/grub-2.00/COPYING
ERROR: Logfile of failure stored in: /opt/work/tmp/work/x86_64-montavista-linux/grub/2.00-r1.2.2/temp/log.do_configure.628
Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
...
| DEBUG: Python function do_qa_configure finished
| ERROR: Function failed: grub: LIC_FILES_CHKSUM points to an invalid file: /opt/work/tmp/work/x86_64-montavista-linux/grub/2.00-r1.2.2/grub-2.00/COPYING
ERROR: Task 5 (/opt/work/tmp/layers/openembedded-core-1.4-1411101352/openembedded-core-1.4-1411101352/meta/recipes-bsp/grub/grub_2.00.bb, do_configure) failed with exit code '1'

If i take my layer out of my conf/extra-layers.conf ,recipe builds ok.

My layer is:

releases

├── meta-mycompany
│  ├── conf
│  │  └── layer.conf
│  ├── README
│  ├── recipes
│      ├── grub
│      │  ├── files
│      │  │  ├── grubatca.cfg
│      │  │  └── grubmni.cfg
│      │  └── grub_2.00.bbappend
│      ├── images
│          ├── mycompany-atca-image.bb
│          └── mycompany-atca-image-buildcf.bb
├── meta-mycompany.tar.bz2
├── meta-mycompany.tar.bz2.md5

Do you know what is the problem?
Must an .append recipe also provide a LICENCE file? Where?

Thank you

Signature · 4 lines
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto