Raspberry pi 4 recipe and layer issues.
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi AllAny and all help is appreciated. Thanks in advance.
I want to install 6 software packages needed for FPGA Development.These are icestorm, arachne-pnr, yosys, nextpnr, verilator, and zipcpu.I have created 4 of the recipes (icestorm_0.1.bb, arachne-pnr_0.1.bb, yosys_0.1.bb, and nextpnr_0.1.bb)using the recipetool & bitbake-layers, and I added these to a meta-yosys-tools layer.
https://github.com/develone/meta-yosys-tools.git
I can now execute "bitbake icestorm" which is a python and C++ Makefile project.The first time the recipe goes thru the python build and gets an error existing the shell.If I rerun "bitbake icestorm" I get
| iceprog.c:27:10: fatal error: ftdi.h: No such file or directory| 27 | #include <ftdi.h>| | ^~~~~~~~Which is the 2nd C++ program in the Makfile.On the rpi4-64 all that is needed are the following steps to build icestorm git clone https://github.com/cliffordwolf/icestorm.git cd icestorm make real 33m4.774s user 32m39.073s sys 0m19.247s I first tried using the cross compiler with little sucess. This is why I trying to generate the recipes to build using bitbake instead. These are the location of the header files, needed to be added to the cross compiler sdkwhich I installed for rpi4 using the following commands. "bitbake meta-toolchain" "bitbake core-image-sato -c populate_sdk_ext" "./poky-glibc-x86_64-meta-toolchain-aarch64-raspberrypi4-64-toolchain-3.0.1.sh" /usr/include/libftdi1/ftdi.h/usr/include/pcap/usb.h
As root make install which install to /usr/local/bin & /usr/local/share.Creates /usr/local/bin & /usr/local/sharels /usr/local/bin/icebox.py icebox_diff icebox_maps icebram iceprogicebox_asc2hlc icebox_explain icebox_stat icemulti icetimeicebox_chipdb icebox_hlc2asc icebox_vlog icepack iceunpackicebox_colbuf icebox_html iceboxdb.py icepll
ls /usr/local/share/icebox/chipdb-1k.txt chipdb-lm4k.txt timings_lp1k.txt timings_up5k.txtchipdb-384.txt chipdb-u4k.txt timings_lp384.txtchipdb-5k.txt timings_hx1k.txt timings_lp8k.txtchipdb-8k.txt timings_hx8k.txt timings_u4k.txt
When I executed "bitbake nextpnr", I noticed the boost was built first. Since then I have added boost to rpi4-core-image-sato which added quite a bit to the image2420113408 without boost and 2839543808 with boost.
Let me know if I can provide additional information.
Best Regards
Edward Vidal Jr. e-mail [email protected] 915-595-1613
Quoted 9 lines · Ed Vidal
Hi AllAny and all help is appreciated. Thanks in advance.
I want to install 6 software packages needed for FPGA Development.These are icestorm, arachne-pnr, yosys, nextpnr, verilator, and zipcpu.I have created 4 of the recipes (icestorm_0.1.bb, arachne-pnr_0.1.bb, yosys_0.1.bb, and nextpnr_0.1.bb)using the recipetool & bitbake-layers, and I added these to a meta-yosys-tools layer.
https://github.com/develone/meta-yosys-tools.git
I can now execute "bitbake icestorm" which is a python and C++Makefileproject.The first time the recipe goes thru the python build and gets an error existing the shell.If I rerun "bitbake icestorm" I get
| iceprog.c:27:10: fatal error:ftdi.h: No such file or directory| 27 | #include <ftdi.h>| | ^~~~~~~~Which is the 2nd C++ program in the Makfile.On the rpi4-64 all that is needed are the following steps to build icestorm git clone https://github.com/cliffordwolf/icestorm.git cd icestorm make real 33m4.774s user 32m39.073s sys 0m19.247s I first tried using the cross compiler with little sucess. This is why I trying to generate the recipes to build using bitbake instead. These are the location of the header files, needed to be added to the cross compiler sdkwhich I installed for rpi4 using the following commands. "bitbake meta-toolchain" "bitbake core-image-sato -cpopulate_sdk_ext" "./poky-glibc-x86_64-meta-toolchain-aarch64-raspberrypi4-64-toolchain-3.0.1.sh"/usr/include/libftdi1/ftdi.h/usr/include/pcap/usb.h
As root make install which install to/usr/local/bin&/usr/local/share.Creates/usr/local/bin&/usr/local/sharels/usr/local/bin/icebox.pyicebox_difficebox_maps icebram iceprogicebox_asc2hlcicebox_explainicebox_stat icemultiicetimeicebox_chipdbicebox_hlc2ascicebox_vlog icepack iceunpackicebox_colbuficebox_htmliceboxdb.py icepll
ls/usr/local/share/icebox/chipdb-1k.txtchipdb-lm4k.txt timings_lp1k.txt timings_up5k.txtchipdb-384.txt chipdb-u4k.txt timings_lp384.txtchipdb-5k.txt timings_hx1k.txt timings_lp8k.txtchipdb-8k.txt timings_hx8k.txt timings_u4k.txt
When I executed "bitbake nextpnr", I noticed the boost was built first. Since then I have added boost to rpi4-core-image-sato which added quite a bit to the image2420113408 without boost and 2839543808 with boost.
This sounds all very much like you just need to sort out your dependencies. If something needs boost, there should be
DEPENDS = "boost"
in the recipe. If smething needs libftdi, there should be
DEPENDS = "libftdi"
and so on, and so on. Randomly adding things to the image does not solve those issue, for a simple reason: It guarantees that the thing go into the image. It does *not* guarantee that they are already around when some random, other recipe is being built.
So, first and foremost - sort out your dependencies.
There is some introductory information here:
https://youtu.be/IehnEC3GOGU
Greetz
Signature · 20 lines
——————————————— Josef Holzmayr Software Developer Embedded Systems Tel: +49 8444 9204-48 Fax: +49 8444 9204-50 R-S-I Elektrotechnik GmbH & Co. KG Woelkestrasse 11 D-85301 Schweitenkirchen www.rsi-elektrotechnik.de ——————————————— Amtsgericht Ingolstadt – GmbH: HRB 191328 – KG: HRA 170393 Geschäftsführer: Dr.-Ing. Michael Sorg, Dipl.-Ing. Franz Sorg Ust-IdNr: DE 128592548 _____________________________________________________________ Amtsgericht Ingolstadt - GmbH: HRB 191328 - KG: HRA 170363 Geschäftsführer: Dr.-Ing. Michael Sorg, Dipl.-Ing. Franz Sorg USt-IdNr.: DE 128592548