Skip to contentSkip to conversation

drm/i915: Add polish to VLV WM shift+mask operations

PATCH In review [email protected] 4 participants 6 messages Mar 10, 2015 – Mar 11, 2015

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drm/i915: Add polish to VLV WM shift+mask operations

From: Ville Syrjälä <[email protected]>

Wrap the FW register value shift+mask operations into a macro to hide the ugliness a bit. Also might avoid bugs due to typos.

Also rename all the primary/sprite plane low order bit masks to have the _VLV suffix, so that we can use the FW_WM_VLV() macro instead of the FW_WM() macro for them in a consistent manner. Cursor and all the high order bits are left to use the FW_WM() macro as there's no real confusion with them.

---
 drivers/gpu/drm/i915/i915_reg.h | 10 +++---
 drivers/gpu/drm/i915/intel_pm.c | 74 +++++++++++++++++++++++------------------
 2 files changed, 46 insertions(+), 38 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +5 -5
index 495b22b..8ff039d 100644
@@ -4161,25 +4161,25 @@ enum skl_disp_power_wells {
 #define   DSPFW_SPRITED_WM1_SHIFT	24
 #define   DSPFW_SPRITED_WM1_MASK	(0xff<<24)
 #define   DSPFW_SPRITED_SHIFT		16
-#define   DSPFW_SPRITED_MASK		(0xff<<16)
+#define   DSPFW_SPRITED_MASK_VLV	(0xff<<16)
 #define   DSPFW_SPRITEC_WM1_SHIFT	8
 #define   DSPFW_SPRITEC_WM1_MASK	(0xff<<8)
 #define   DSPFW_SPRITEC_SHIFT		0
-#define   DSPFW_SPRITEC_MASK		(0xff<<0)
+#define   DSPFW_SPRITEC_MASK_VLV	(0xff<<0)
 #define DSPFW8_CHV		(VLV_DISPLAY_BASE + 0x700b8)
 #define   DSPFW_SPRITEF_WM1_SHIFT	24
 #define   DSPFW_SPRITEF_WM1_MASK	(0xff<<24)
 #define   DSPFW_SPRITEF_SHIFT		16
-#define   DSPFW_SPRITEF_MASK		(0xff<<16)
+#define   DSPFW_SPRITEF_MASK_VLV	(0xff<<16)
 #define   DSPFW_SPRITEE_WM1_SHIFT	8
 #define   DSPFW_SPRITEE_WM1_MASK	(0xff<<8)
 #define   DSPFW_SPRITEE_SHIFT		0
-#define   DSPFW_SPRITEE_MASK		(0xff<<0)
+#define   DSPFW_SPRITEE_MASK_VLV	(0xff<<0)
 #define DSPFW9_CHV		(VLV_DISPLAY_BASE + 0x7007c) /* wtf #2? */
 #define   DSPFW_PLANEC_WM1_SHIFT	24
 #define   DSPFW_PLANEC_WM1_MASK		(0xff<<24)
 #define   DSPFW_PLANEC_SHIFT		16
-#define   DSPFW_PLANEC_MASK		(0xff<<16)
+#define   DSPFW_PLANEC_MASK_VLV		(0xff<<16)
 #define   DSPFW_CURSORC_WM1_SHIFT	8
 #define   DSPFW_CURSORC_WM1_MASK	(0x3f<<16)
 #define   DSPFW_CURSORC_SHIFT		0
drivers/gpu/drm/i915/intel_pm.c +41 -33

103 lines not on this page · raw message

Signature · 6 lines
2.0.5

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH 1/1 drm/i915: Use FW_WM() macro for older gmch platforms too

From: Ville Syrjälä <[email protected]>

Use the FW_WM() macro from the VLV wm code to polish up the wm code for older gmch platforms.

---
 drivers/gpu/drm/i915/i915_reg.h |  4 ++--
 drivers/gpu/drm/i915/intel_pm.c | 42 +++++++++++++++++++++--------------------
 2 files changed, 24 insertions(+), 22 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +2 -2
index 8ff039d..793ed63 100644
@@ -4121,8 +4121,8 @@ enum skl_disp_power_wells {
 #define   DSPFW_SPRITEB_MASK_VLV	(0xff<<16) /* vlv/chv */
 #define   DSPFW_CURSORA_SHIFT		8
 #define   DSPFW_CURSORA_MASK		(0x3f<<8)
-#define   DSPFW_PLANEC_SHIFT_OLD	0
-#define   DSPFW_PLANEC_MASK_OLD		(0x7f<<0) /* pre-gen4 sprite C */
+#define   DSPFW_PLANEC_OLD_SHIFT	0
+#define   DSPFW_PLANEC_OLD_MASK		(0x7f<<0) /* pre-gen4 sprite C */
 #define   DSPFW_SPRITEA_SHIFT		0
 #define   DSPFW_SPRITEA_MASK		(0x7f<<0) /* g4x */
 #define   DSPFW_SPRITEA_MASK_VLV	(0xff<<0) /* vlv/chv */
drivers/gpu/drm/i915/intel_pm.c +22 -20

107 lines not on this page · raw message

Signature · 6 lines
2.0.5

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v1 1/1
#2 lore raw

Re: [PATCH] drm/i915: Use FW_WM() macro for older gmch platforms too

Quoted 138 lines · On 03/10/2015 08:02 AM, [email protected] wrote:

From: Ville Syrjälä <[email protected]>

Use the FW_WM() macro from the VLV wm code to polish up the wm code for older gmch platforms.

---
 drivers/gpu/drm/i915/i915_reg.h |  4 ++--
 drivers/gpu/drm/i915/intel_pm.c | 42 +++++++++++++++++++++--------------------
 2 files changed, 24 insertions(+), 22 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +2 -2
index 8ff039d..793ed63 100644
@@ -4121,8 +4121,8 @@ enum skl_disp_power_wells {
 #define   DSPFW_SPRITEB_MASK_VLV	(0xff<<16) /* vlv/chv */
 #define   DSPFW_CURSORA_SHIFT		8
 #define   DSPFW_CURSORA_MASK		(0x3f<<8)
-#define   DSPFW_PLANEC_SHIFT_OLD	0
-#define   DSPFW_PLANEC_MASK_OLD		(0x7f<<0) /* pre-gen4 sprite C */
+#define   DSPFW_PLANEC_OLD_SHIFT	0
+#define   DSPFW_PLANEC_OLD_MASK		(0x7f<<0) /* pre-gen4 sprite C */
 #define   DSPFW_SPRITEA_SHIFT		0
 #define   DSPFW_SPRITEA_MASK		(0x7f<<0) /* g4x */
 #define   DSPFW_SPRITEA_MASK_VLV	(0xff<<0) /* vlv/chv */
drivers/gpu/drm/i915/intel_pm.c +20 -20
index 8ac358d0..9ac9a2f 100644
@@ -301,6 +301,9 @@ static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable)
 	mutex_unlock(&dev_priv->rps.hw_lock);
 }
 
+#define FW_WM(value, plane) \
+	(((value) << DSPFW_ ## plane ## _SHIFT) & DSPFW_ ## plane ## _MASK)
+
 void intel_set_memory_cxsr(struct drm_i915_private *dev_priv, bool enable)
 {
 	struct drm_device *dev = dev_priv->dev;
@@ -661,7 +664,7 @@ static void pineview_update_wm(struct drm_crtc *unused_crtc)
 					pixel_size, latency->display_sr);
 		reg = I915_READ(DSPFW1);
 		reg &= ~DSPFW_SR_MASK;
-		reg |= wm << DSPFW_SR_SHIFT;
+		reg |= FW_WM(wm, SR);
 		I915_WRITE(DSPFW1, reg);
 		DRM_DEBUG_KMS("DSPFW1 register is %x\n", reg);
 
@@ -671,7 +674,7 @@ static void pineview_update_wm(struct drm_crtc *unused_crtc)
 					pixel_size, latency->cursor_sr);
 		reg = I915_READ(DSPFW3);
 		reg &= ~DSPFW_CURSOR_SR_MASK;
-		reg |= (wm & 0x3f) << DSPFW_CURSOR_SR_SHIFT;
+		reg |= FW_WM(wm, CURSOR_SR);
 		I915_WRITE(DSPFW3, reg);
 
 		/* Display HPLL off SR */
@@ -680,7 +683,7 @@ static void pineview_update_wm(struct drm_crtc *unused_crtc)
 					pixel_size, latency->display_hpll_disable);
 		reg = I915_READ(DSPFW3);
 		reg &= ~DSPFW_HPLL_SR_MASK;
-		reg |= wm & DSPFW_HPLL_SR_MASK;
+		reg |= FW_WM(wm, HPLL_SR);
 		I915_WRITE(DSPFW3, reg);
 
 		/* cursor HPLL off SR */
@@ -689,7 +692,7 @@ static void pineview_update_wm(struct drm_crtc *unused_crtc)
 					pixel_size, latency->cursor_hpll_disable);
 		reg = I915_READ(DSPFW3);
 		reg &= ~DSPFW_HPLL_CURSOR_MASK;
-		reg |= (wm & 0x3f) << DSPFW_HPLL_CURSOR_SHIFT;
+		reg |= FW_WM(wm, HPLL_CURSOR);
 		I915_WRITE(DSPFW3, reg);
 		DRM_DEBUG_KMS("DSPFW3 register is %x\n", reg);
 
@@ -835,8 +838,6 @@ static bool g4x_compute_srwm(struct drm_device *dev,
 			      display, cursor);
 }
 
-#define FW_WM(value, plane) \
-	(((value) << DSPFW_ ## plane ## _SHIFT) & DSPFW_ ## plane ## _MASK)
 #define FW_WM_VLV(value, plane) \
 	(((value) << DSPFW_ ## plane ## _SHIFT) & DSPFW_ ## plane ## _MASK_VLV)
 
@@ -904,7 +905,6 @@ static void vlv_write_wm_values(struct intel_crtc *crtc,
 	dev_priv->wm.vlv = *wm;
 }
 
-#undef FW_WM
 #undef FW_WM_VLV
 
 static uint8_t vlv_compute_drain_latency(struct drm_crtc *crtc,
@@ -1163,17 +1163,17 @@ static void g4x_update_wm(struct drm_crtc *crtc)
 		      plane_sr, cursor_sr);
 
 	I915_WRITE(DSPFW1,
-		   (plane_sr << DSPFW_SR_SHIFT) |
-		   (cursorb_wm << DSPFW_CURSORB_SHIFT) |
-		   (planeb_wm << DSPFW_PLANEB_SHIFT) |
-		   (planea_wm << DSPFW_PLANEA_SHIFT));
+		   FW_WM(plane_sr, SR) |
+		   FW_WM(cursorb_wm, CURSORB) |
+		   FW_WM(planeb_wm, PLANEB) |
+		   FW_WM(planea_wm, PLANEA));
 	I915_WRITE(DSPFW2,
 		   (I915_READ(DSPFW2) & ~DSPFW_CURSORA_MASK) |
-		   (cursora_wm << DSPFW_CURSORA_SHIFT));
+		   FW_WM(cursora_wm, CURSORA));
 	/* HPLL off in SR has some issues on G4x... disable it */
 	I915_WRITE(DSPFW3,
 		   (I915_READ(DSPFW3) & ~(DSPFW_HPLL_SR_EN | DSPFW_CURSOR_SR_MASK)) |
-		   (cursor_sr << DSPFW_CURSOR_SR_SHIFT));
+		   FW_WM(cursor_sr, CURSOR_SR));
 
 	if (cxsr_enabled)
 		intel_set_memory_cxsr(dev_priv, true);
@@ -1239,19 +1239,21 @@ static void i965_update_wm(struct drm_crtc *unused_crtc)
 		      srwm);
 
 	/* 965 has limitations... */
-	I915_WRITE(DSPFW1, (srwm << DSPFW_SR_SHIFT) |
-		   (8 << DSPFW_CURSORB_SHIFT) |
-		   (8 << DSPFW_PLANEB_SHIFT) |
-		   (8 << DSPFW_PLANEA_SHIFT));
-	I915_WRITE(DSPFW2, (8 << DSPFW_CURSORA_SHIFT) |
-		   (8 << DSPFW_PLANEC_SHIFT_OLD));
+	I915_WRITE(DSPFW1, FW_WM(srwm, SR) |
+		   FW_WM(8, CURSORB) |
+		   FW_WM(8, PLANEB) |
+		   FW_WM(8, PLANEA));
+	I915_WRITE(DSPFW2, FW_WM(8, CURSORA) |
+		   FW_WM(8, PLANEC_OLD));
 	/* update cursor SR watermark */
-	I915_WRITE(DSPFW3, (cursor_sr << DSPFW_CURSOR_SR_SHIFT));
+	I915_WRITE(DSPFW3, FW_WM(cursor_sr, CURSOR_SR));

drivers/gpu/drm/i915/intel_pm.c static void i965_update_wm(struct drm_crtc *unused_crtc) · line 1259

Quoted 10 lines
drivers/gpu/drm/i915/intel_pm.c +2 -0
 
 	if (cxsr_enabled)
 		intel_set_memory_cxsr(dev_priv, true);
 }
 
+#undef FW_WM
+
 static void i9xx_update_wm(struct drm_crtc *unused_crtc)
 {
 	struct drm_device *dev = unused_crtc->dev;

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

#3 lore raw

Re: [PATCH] drm/i915: Use FW_WM() macro for older gmch platforms too

Quoted 143 lines · Jesse Barnes
Quoted 142 lines · On 03/10/2015 08:02 AM, [email protected] wrote:

From: Ville Syrjälä <[email protected]>

Use the FW_WM() macro from the VLV wm code to polish up the wm code for older gmch platforms.

---
 drivers/gpu/drm/i915/i915_reg.h |  4 ++--
 drivers/gpu/drm/i915/intel_pm.c | 42 +++++++++++++++++++++--------------------
 2 files changed, 24 insertions(+), 22 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +2 -2
index 8ff039d..793ed63 100644
@@ -4121,8 +4121,8 @@ enum skl_disp_power_wells {
 #define   DSPFW_SPRITEB_MASK_VLV	(0xff<<16) /* vlv/chv */
 #define   DSPFW_CURSORA_SHIFT		8
 #define   DSPFW_CURSORA_MASK		(0x3f<<8)
-#define   DSPFW_PLANEC_SHIFT_OLD	0
-#define   DSPFW_PLANEC_MASK_OLD		(0x7f<<0) /* pre-gen4 sprite C */
+#define   DSPFW_PLANEC_OLD_SHIFT	0
+#define   DSPFW_PLANEC_OLD_MASK		(0x7f<<0) /* pre-gen4 sprite C */
 #define   DSPFW_SPRITEA_SHIFT		0
 #define   DSPFW_SPRITEA_MASK		(0x7f<<0) /* g4x */
 #define   DSPFW_SPRITEA_MASK_VLV	(0xff<<0) /* vlv/chv */
drivers/gpu/drm/i915/intel_pm.c +20 -20
index 8ac358d0..9ac9a2f 100644
@@ -301,6 +301,9 @@ static void chv_set_memory_pm5(struct drm_i915_private *dev_priv, bool enable)
 	mutex_unlock(&dev_priv->rps.hw_lock);
 }
 
+#define FW_WM(value, plane) \
+	(((value) << DSPFW_ ## plane ## _SHIFT) & DSPFW_ ## plane ## _MASK)
+
 void intel_set_memory_cxsr(struct drm_i915_private *dev_priv, bool enable)
 {
 	struct drm_device *dev = dev_priv->dev;
@@ -661,7 +664,7 @@ static void pineview_update_wm(struct drm_crtc *unused_crtc)
 					pixel_size, latency->display_sr);
 		reg = I915_READ(DSPFW1);
 		reg &= ~DSPFW_SR_MASK;
-		reg |= wm << DSPFW_SR_SHIFT;
+		reg |= FW_WM(wm, SR);
 		I915_WRITE(DSPFW1, reg);
 		DRM_DEBUG_KMS("DSPFW1 register is %x\n", reg);
 
@@ -671,7 +674,7 @@ static void pineview_update_wm(struct drm_crtc *unused_crtc)
 					pixel_size, latency->cursor_sr);
 		reg = I915_READ(DSPFW3);
 		reg &= ~DSPFW_CURSOR_SR_MASK;
-		reg |= (wm & 0x3f) << DSPFW_CURSOR_SR_SHIFT;
+		reg |= FW_WM(wm, CURSOR_SR);
 		I915_WRITE(DSPFW3, reg);
 
 		/* Display HPLL off SR */
@@ -680,7 +683,7 @@ static void pineview_update_wm(struct drm_crtc *unused_crtc)
 					pixel_size, latency->display_hpll_disable);
 		reg = I915_READ(DSPFW3);
 		reg &= ~DSPFW_HPLL_SR_MASK;
-		reg |= wm & DSPFW_HPLL_SR_MASK;
+		reg |= FW_WM(wm, HPLL_SR);
 		I915_WRITE(DSPFW3, reg);
 
 		/* cursor HPLL off SR */
@@ -689,7 +692,7 @@ static void pineview_update_wm(struct drm_crtc *unused_crtc)
 					pixel_size, latency->cursor_hpll_disable);
 		reg = I915_READ(DSPFW3);
 		reg &= ~DSPFW_HPLL_CURSOR_MASK;
-		reg |= (wm & 0x3f) << DSPFW_HPLL_CURSOR_SHIFT;
+		reg |= FW_WM(wm, HPLL_CURSOR);
 		I915_WRITE(DSPFW3, reg);
 		DRM_DEBUG_KMS("DSPFW3 register is %x\n", reg);
 
@@ -835,8 +838,6 @@ static bool g4x_compute_srwm(struct drm_device *dev,
 			      display, cursor);
 }
 
-#define FW_WM(value, plane) \
-	(((value) << DSPFW_ ## plane ## _SHIFT) & DSPFW_ ## plane ## _MASK)
 #define FW_WM_VLV(value, plane) \
 	(((value) << DSPFW_ ## plane ## _SHIFT) & DSPFW_ ## plane ## _MASK_VLV)
 
@@ -904,7 +905,6 @@ static void vlv_write_wm_values(struct intel_crtc *crtc,
 	dev_priv->wm.vlv = *wm;
 }
 
-#undef FW_WM
 #undef FW_WM_VLV
 
 static uint8_t vlv_compute_drain_latency(struct drm_crtc *crtc,
@@ -1163,17 +1163,17 @@ static void g4x_update_wm(struct drm_crtc *crtc)
 		      plane_sr, cursor_sr);
 
 	I915_WRITE(DSPFW1,
-		   (plane_sr << DSPFW_SR_SHIFT) |
-		   (cursorb_wm << DSPFW_CURSORB_SHIFT) |
-		   (planeb_wm << DSPFW_PLANEB_SHIFT) |
-		   (planea_wm << DSPFW_PLANEA_SHIFT));
+		   FW_WM(plane_sr, SR) |
+		   FW_WM(cursorb_wm, CURSORB) |
+		   FW_WM(planeb_wm, PLANEB) |
+		   FW_WM(planea_wm, PLANEA));
 	I915_WRITE(DSPFW2,
 		   (I915_READ(DSPFW2) & ~DSPFW_CURSORA_MASK) |
-		   (cursora_wm << DSPFW_CURSORA_SHIFT));
+		   FW_WM(cursora_wm, CURSORA));
 	/* HPLL off in SR has some issues on G4x... disable it */
 	I915_WRITE(DSPFW3,
 		   (I915_READ(DSPFW3) & ~(DSPFW_HPLL_SR_EN | DSPFW_CURSOR_SR_MASK)) |
-		   (cursor_sr << DSPFW_CURSOR_SR_SHIFT));
+		   FW_WM(cursor_sr, CURSOR_SR));
 
 	if (cxsr_enabled)
 		intel_set_memory_cxsr(dev_priv, true);
@@ -1239,19 +1239,21 @@ static void i965_update_wm(struct drm_crtc *unused_crtc)
 		      srwm);
 
 	/* 965 has limitations... */
-	I915_WRITE(DSPFW1, (srwm << DSPFW_SR_SHIFT) |
-		   (8 << DSPFW_CURSORB_SHIFT) |
-		   (8 << DSPFW_PLANEB_SHIFT) |
-		   (8 << DSPFW_PLANEA_SHIFT));
-	I915_WRITE(DSPFW2, (8 << DSPFW_CURSORA_SHIFT) |
-		   (8 << DSPFW_PLANEC_SHIFT_OLD));
+	I915_WRITE(DSPFW1, FW_WM(srwm, SR) |
+		   FW_WM(8, CURSORB) |
+		   FW_WM(8, PLANEB) |
+		   FW_WM(8, PLANEA));
+	I915_WRITE(DSPFW2, FW_WM(8, CURSORA) |
+		   FW_WM(8, PLANEC_OLD));
 	/* update cursor SR watermark */
-	I915_WRITE(DSPFW3, (cursor_sr << DSPFW_CURSOR_SR_SHIFT));
+	I915_WRITE(DSPFW3, FW_WM(cursor_sr, CURSOR_SR));
 
 	if (cxsr_enabled)
 		intel_set_memory_cxsr(dev_priv, true);
 }
 
Quoted 8 lines

drivers/gpu/drm/i915/intel_pm.c static void i965_update_wm(struct drm_crtc *unused_crtc) · line 1259

Quoted 6 lines
drivers/gpu/drm/i915/intel_pm.c +2 -0
+#undef FW_WM
+
 static void i9xx_update_wm(struct drm_crtc *unused_crtc)
 {
 	struct drm_device *dev = unused_crtc->dev;

Both merged, thanks for patches&review.
-Daniel

Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v1 1/1
#4 lore raw
In reply to [email protected]
Quoted 155 lines · On 03/10/2015 07:16 AM, [email protected] wrote:

From: Ville Syrjälä <[email protected]>

Wrap the FW register value shift+mask operations into a macro to hide the ugliness a bit. Also might avoid bugs due to typos.

Also rename all the primary/sprite plane low order bit masks to have the _VLV suffix, so that we can use the FW_WM_VLV() macro instead of the FW_WM() macro for them in a consistent manner. Cursor and all the high order bits are left to use the FW_WM() macro as there's no real confusion with them.

---
 drivers/gpu/drm/i915/i915_reg.h | 10 +++---
 drivers/gpu/drm/i915/intel_pm.c | 74 +++++++++++++++++++++++------------------
 2 files changed, 46 insertions(+), 38 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +5 -5
index 495b22b..8ff039d 100644
@@ -4161,25 +4161,25 @@ enum skl_disp_power_wells {
 #define   DSPFW_SPRITED_WM1_SHIFT	24
 #define   DSPFW_SPRITED_WM1_MASK	(0xff<<24)
 #define   DSPFW_SPRITED_SHIFT		16
-#define   DSPFW_SPRITED_MASK		(0xff<<16)
+#define   DSPFW_SPRITED_MASK_VLV	(0xff<<16)
 #define   DSPFW_SPRITEC_WM1_SHIFT	8
 #define   DSPFW_SPRITEC_WM1_MASK	(0xff<<8)
 #define   DSPFW_SPRITEC_SHIFT		0
-#define   DSPFW_SPRITEC_MASK		(0xff<<0)
+#define   DSPFW_SPRITEC_MASK_VLV	(0xff<<0)
 #define DSPFW8_CHV		(VLV_DISPLAY_BASE + 0x700b8)
 #define   DSPFW_SPRITEF_WM1_SHIFT	24
 #define   DSPFW_SPRITEF_WM1_MASK	(0xff<<24)
 #define   DSPFW_SPRITEF_SHIFT		16
-#define   DSPFW_SPRITEF_MASK		(0xff<<16)
+#define   DSPFW_SPRITEF_MASK_VLV	(0xff<<16)
 #define   DSPFW_SPRITEE_WM1_SHIFT	8
 #define   DSPFW_SPRITEE_WM1_MASK	(0xff<<8)
 #define   DSPFW_SPRITEE_SHIFT		0
-#define   DSPFW_SPRITEE_MASK		(0xff<<0)
+#define   DSPFW_SPRITEE_MASK_VLV	(0xff<<0)
 #define DSPFW9_CHV		(VLV_DISPLAY_BASE + 0x7007c) /* wtf #2? */
 #define   DSPFW_PLANEC_WM1_SHIFT	24
 #define   DSPFW_PLANEC_WM1_MASK		(0xff<<24)
 #define   DSPFW_PLANEC_SHIFT		16
-#define   DSPFW_PLANEC_MASK		(0xff<<16)
+#define   DSPFW_PLANEC_MASK_VLV		(0xff<<16)
 #define   DSPFW_CURSORC_WM1_SHIFT	8
 #define   DSPFW_CURSORC_WM1_MASK	(0x3f<<16)
 #define   DSPFW_CURSORC_SHIFT		0
drivers/gpu/drm/i915/intel_pm.c +38 -33
index 0e84558..8ac358d0 100644
@@ -835,6 +835,11 @@ static bool g4x_compute_srwm(struct drm_device *dev,
 			      display, cursor);
 }
 
+#define FW_WM(value, plane) \
+	(((value) << DSPFW_ ## plane ## _SHIFT) & DSPFW_ ## plane ## _MASK)
+#define FW_WM_VLV(value, plane) \
+	(((value) << DSPFW_ ## plane ## _SHIFT) & DSPFW_ ## plane ## _MASK_VLV)
+
 static void vlv_write_wm_values(struct intel_crtc *crtc,
 				const struct vlv_wm_values *wm)
 {
@@ -848,50 +853,50 @@ static void vlv_write_wm_values(struct intel_crtc *crtc,
 		   (wm->ddl[pipe].primary << DDL_PLANE_SHIFT));
 
 	I915_WRITE(DSPFW1,
-		   ((wm->sr.plane << DSPFW_SR_SHIFT) & DSPFW_SR_MASK) |
-		   ((wm->pipe[PIPE_B].cursor << DSPFW_CURSORB_SHIFT) & DSPFW_CURSORB_MASK) |
-		   ((wm->pipe[PIPE_B].primary << DSPFW_PLANEB_SHIFT) & DSPFW_PLANEB_MASK_VLV) |
-		   ((wm->pipe[PIPE_A].primary << DSPFW_PLANEA_SHIFT) & DSPFW_PLANEA_MASK_VLV));
+		   FW_WM(wm->sr.plane, SR) |
+		   FW_WM(wm->pipe[PIPE_B].cursor, CURSORB) |
+		   FW_WM_VLV(wm->pipe[PIPE_B].primary, PLANEB) |
+		   FW_WM_VLV(wm->pipe[PIPE_A].primary, PLANEA));
 	I915_WRITE(DSPFW2,
-		   ((wm->pipe[PIPE_A].sprite[1] << DSPFW_SPRITEB_SHIFT) & DSPFW_SPRITEB_MASK_VLV) |
-		   ((wm->pipe[PIPE_A].cursor << DSPFW_CURSORA_SHIFT) & DSPFW_CURSORA_MASK) |
-		   ((wm->pipe[PIPE_A].sprite[0] << DSPFW_SPRITEA_SHIFT) & DSPFW_SPRITEA_MASK_VLV));
+		   FW_WM_VLV(wm->pipe[PIPE_A].sprite[1], SPRITEB) |
+		   FW_WM(wm->pipe[PIPE_A].cursor, CURSORA) |
+		   FW_WM_VLV(wm->pipe[PIPE_A].sprite[0], SPRITEA));
 	I915_WRITE(DSPFW3,
-		   ((wm->sr.cursor << DSPFW_CURSOR_SR_SHIFT) & DSPFW_CURSOR_SR_MASK));
+		   FW_WM(wm->sr.cursor, CURSOR_SR));
 
 	if (IS_CHERRYVIEW(dev_priv)) {
 		I915_WRITE(DSPFW7_CHV,
-			   ((wm->pipe[PIPE_B].sprite[1] << DSPFW_SPRITED_SHIFT) & DSPFW_SPRITED_MASK) |
-			   ((wm->pipe[PIPE_B].sprite[0] << DSPFW_SPRITEC_SHIFT) & DSPFW_SPRITEC_MASK));
+			   FW_WM_VLV(wm->pipe[PIPE_B].sprite[1], SPRITED) |
+			   FW_WM_VLV(wm->pipe[PIPE_B].sprite[0], SPRITEC));
 		I915_WRITE(DSPFW8_CHV,
-			   ((wm->pipe[PIPE_C].sprite[1] << DSPFW_SPRITEF_SHIFT) & DSPFW_SPRITEF_MASK) |
-			   ((wm->pipe[PIPE_C].sprite[0] << DSPFW_SPRITEE_SHIFT) & DSPFW_SPRITEE_MASK));
+			   FW_WM_VLV(wm->pipe[PIPE_C].sprite[1], SPRITEF) |
+			   FW_WM_VLV(wm->pipe[PIPE_C].sprite[0], SPRITEE));
 		I915_WRITE(DSPFW9_CHV,
-			   ((wm->pipe[PIPE_C].primary << DSPFW_PLANEC_SHIFT) & DSPFW_PLANEC_MASK) |
-			   ((wm->pipe[PIPE_C].cursor << DSPFW_CURSORC_SHIFT) & DSPFW_CURSORC_MASK));
+			   FW_WM_VLV(wm->pipe[PIPE_C].primary, PLANEC) |
+			   FW_WM(wm->pipe[PIPE_C].cursor, CURSORC));
 		I915_WRITE(DSPHOWM,
-			   (((wm->sr.plane >> 9) << DSPFW_SR_HI_SHIFT) & DSPFW_SR_HI_MASK) |
-			   (((wm->pipe[PIPE_C].sprite[1] >> 8) << DSPFW_SPRITEF_HI_SHIFT) & DSPFW_SPRITEF_HI_MASK) |
-			   (((wm->pipe[PIPE_C].sprite[0] >> 8) << DSPFW_SPRITEE_HI_SHIFT) & DSPFW_SPRITEE_HI_MASK) |
-			   (((wm->pipe[PIPE_C].primary >> 8) << DSPFW_PLANEC_HI_SHIFT) & DSPFW_PLANEC_HI_MASK) |
-			   (((wm->pipe[PIPE_B].sprite[1] >> 8) << DSPFW_SPRITED_HI_SHIFT) & DSPFW_SPRITED_HI_MASK) |
-			   (((wm->pipe[PIPE_B].sprite[0] >> 8) << DSPFW_SPRITEC_HI_SHIFT) & DSPFW_SPRITEC_HI_MASK) |
-			   (((wm->pipe[PIPE_B].primary >> 8) << DSPFW_PLANEB_HI_SHIFT) & DSPFW_PLANEB_HI_MASK) |
-			   (((wm->pipe[PIPE_A].sprite[1] >> 8) << DSPFW_SPRITEB_HI_SHIFT) & DSPFW_SPRITEB_HI_MASK) |
-			   (((wm->pipe[PIPE_A].sprite[0] >> 8) << DSPFW_SPRITEA_HI_SHIFT) & DSPFW_SPRITEA_HI_MASK) |
-			   (((wm->pipe[PIPE_A].primary >> 8) << DSPFW_PLANEA_HI_SHIFT) & DSPFW_PLANEA_HI_MASK));
+			   FW_WM(wm->sr.plane >> 9, SR_HI) |
+			   FW_WM(wm->pipe[PIPE_C].sprite[1] >> 8, SPRITEF_HI) |
+			   FW_WM(wm->pipe[PIPE_C].sprite[0] >> 8, SPRITEE_HI) |
+			   FW_WM(wm->pipe[PIPE_C].primary >> 8, PLANEC_HI) |
+			   FW_WM(wm->pipe[PIPE_B].sprite[1] >> 8, SPRITED_HI) |
+			   FW_WM(wm->pipe[PIPE_B].sprite[0] >> 8, SPRITEC_HI) |
+			   FW_WM(wm->pipe[PIPE_B].primary >> 8, PLANEB_HI) |
+			   FW_WM(wm->pipe[PIPE_A].sprite[1] >> 8, SPRITEB_HI) |
+			   FW_WM(wm->pipe[PIPE_A].sprite[0] >> 8, SPRITEA_HI) |
+			   FW_WM(wm->pipe[PIPE_A].primary >> 8, PLANEA_HI));
 	} else {
 		I915_WRITE(DSPFW7,
-			   ((wm->pipe[PIPE_B].sprite[1] << DSPFW_SPRITED_SHIFT) & DSPFW_SPRITED_MASK) |
-			   ((wm->pipe[PIPE_B].sprite[0] << DSPFW_SPRITEC_SHIFT) & DSPFW_SPRITEC_MASK));
+			   FW_WM_VLV(wm->pipe[PIPE_B].sprite[1], SPRITED) |
+			   FW_WM_VLV(wm->pipe[PIPE_B].sprite[0], SPRITEC));
 		I915_WRITE(DSPHOWM,
-			   (((wm->sr.plane >> 9) << DSPFW_SR_HI_SHIFT) & DSPFW_SR_HI_MASK) |
-			   (((wm->pipe[PIPE_B].sprite[1] >> 8) << DSPFW_SPRITED_HI_SHIFT) & DSPFW_SPRITED_HI_MASK) |
-			   (((wm->pipe[PIPE_B].sprite[0] >> 8) << DSPFW_SPRITEC_HI_SHIFT) & DSPFW_SPRITEC_HI_MASK) |
-			   (((wm->pipe[PIPE_B].primary >> 8) << DSPFW_PLANEB_HI_SHIFT) & DSPFW_PLANEB_HI_MASK) |
-			   (((wm->pipe[PIPE_A].sprite[1] >> 8) << DSPFW_SPRITEB_HI_SHIFT) & DSPFW_SPRITEB_HI_MASK) |
-			   (((wm->pipe[PIPE_A].sprite[0] >> 8) << DSPFW_SPRITEA_HI_SHIFT) & DSPFW_SPRITEA_HI_MASK) |
-			   (((wm->pipe[PIPE_A].primary >> 8) << DSPFW_PLANEA_HI_SHIFT) & DSPFW_PLANEA_HI_MASK));
+			   FW_WM(wm->sr.plane >> 9, SR_HI) |
+			   FW_WM(wm->pipe[PIPE_B].sprite[1] >> 8, SPRITED_HI) |
+			   FW_WM(wm->pipe[PIPE_B].sprite[0] >> 8, SPRITEC_HI) |
+			   FW_WM(wm->pipe[PIPE_B].primary >> 8, PLANEB_HI) |
+			   FW_WM(wm->pipe[PIPE_A].sprite[1] >> 8, SPRITEB_HI) |
+			   FW_WM(wm->pipe[PIPE_A].sprite[0] >> 8, SPRITEA_HI) |
+			   FW_WM(wm->pipe[PIPE_A].primary >> 8, PLANEA_HI));
 	}
 
 	POSTING_READ(DSPFW1);

drivers/gpu/drm/i915/intel_pm.c static void vlv_write_wm_values(struct intel_crtc *crtc, · line 912

Quoted 9 lines
drivers/gpu/drm/i915/intel_pm.c +3 -0
@@ -899,6 +904,9 @@ static void vlv_write_wm_values(struct intel_crtc *crtc,
 	dev_priv->wm.vlv = *wm;
 }
 
+#undef FW_WM
+#undef FW_WM_VLV
+
 static uint8_t vlv_compute_drain_latency(struct drm_crtc *crtc,
 					 struct drm_plane *plane)
 {

I'd rather see the macros put in the header next to the FW definitions, but that's not a blocker.

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Tested-by on v1 1/1
#5 lore raw
In reply to [email protected]

Task id: 5926 -------------------------------------Summary-------------------------------------
Platform Delta drm-intel-nightly Series Applied
PNV -3 281/281 278/281
ILK 308/308 308/308

SNB                 -1              284/284              283/284
IVB                 -1              375/375              374/375
BYT                                  294/294              294/294
HSW                                  384/384              384/384
BDW                                  315/315              315/315
-------------------------------------Detailed-------------------------------------
Platform  Test                                drm-intel-nightly          Series Applied
*PNV  igt_gen3_render_mixed_blits      PASS(1)      FAIL(2)
 PNV  igt_gen3_render_tiledx_blits      FAIL(1)PASS(1)      FAIL(1)
 PNV  igt_gen3_render_tiledy_blits      FAIL(1)PASS(1)      FAIL(1)
*SNB  igt_gem_flink_bad-flink      PASS(1)      DMESG_WARN(1)PASS(1)
*IVB  igt_gem_storedw_batches_loop_normal      PASS(1)      DMESG_WARN(1)PASS(1)

Note: You need to pay more attention to line start with '*'
_______________________________________________
Intel-gfx mailing list [email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx