iio: adc: Kconfig mcp320x change description Add more ADCs
PATCH 1/2 iio: adc: Kconfig mcp320x change description Add more ADCs
I once submitted patches for adding support for more mcp ADCs
But it seams that not all the patches is in the new kernel, so I try to resubmit
--- drivers/iio/adc/Kconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/iio/adc/Kconfig +3 -2
@@ -186,10 +186,11 @@ config MAX1363 data via the iio dev interface. config MCP320X - tristate "Microchip Technology MCP3204/08" + tristate "Microchip Technology MCP3x01/02/04/08" depends on SPI help - Say yes here to build support for Microchip Technology's MCP3204 or + Say yes here to build support for Microchip Technology's + MCP3001, MCP3002, MCP3004, MCP3008, MCP3201, MCP3202, MCP3204 or MCP3208 analog to digital converter. This driver can also be built as a module. If so, the module will be
Quoted 2 lines · Søren Andersen
I once submitted patches for adding support for more mcp ADCs
But it seams that not all the patches is in the new kernel, so I try to resubmit
I think this came about because as you refined individual patches you sent only those patches. Normal convention is to send a new copy of all of a series with the changed patches included. That way all the patches are grouped together.
Anyhow, applied with this description removed. It isn't relevant information for the git history so should have been below the ---
Applied to the togreg branch of iio.git, initially to be pushed out as testing when I'm not on a train with no internet access.
Jonathan
Quoted 31 lines
Signed-off-by Soeren Andersen <san at rosetechnology.dk>--- drivers/iio/adc/Kconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)drivers/iio/adc/Kconfig +3
-3@@ -186,10 +186,11 @@ config MAX1363 data via the iio dev interface. config MCP320X - tristate "Microchip Technology MCP3204/08" + tristate "Microchip Technology MCP3x01/02/04/08" depends on SPI help - Say yes here to build support for Microchip Technology's MCP3204 or + Say yes here to build support for Microchip Technology's + MCP3001, MCP3002, MCP3004, MCP3008, MCP3201, MCP3202, MCP3204 or MCP3208 analog to digital converter. This driver can also be built as a module. If so, the module will be --To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html