x86: quark: Enable on-chip ethernet controllers
PATCH 1/1 x86: quark: Enable on-chip ethernet controllers
Intel Quark SoC integrates two 10/100 ethernet controllers which can be connected to an external RMII PHY. The MAC IP is from Designware. Enable this support with the existing U-Boot Designware MAC driver so that the ethernet port on Intel Galileo board can be used.
---
arch/x86/cpu/quark/quark.c | 19 +++++++++++++++++++ include/configs/galileo.h | 5 +++++ 2 files changed, 24 insertions(+)
arch/x86/cpu/quark/quark.c +19 -0
@@ -6,6 +6,8 @@#include <common.h> #include <mmc.h> +#include <netdev.h> +#include <phy.h> #include <asm/io.h> #include <asm/pci.h> #include <asm/post.h>
@@ -116,3 +118,20 @@ int cpu_mmc_init(bd_t *bis)return pci_mmc_init ("Quark SDHCI" , mmc_supported,ARRAY_SIZE (mmc_supported)); } + +int cpu_eth_init (bd_t *bis) +{ +u32 base; +int ret0, ret1; + +pci_read_config_dword (QUARK_EMAC0 ,PCI_BASE_ADDRESS_0 , &base); + ret0 =designware_initialize (base,PHY_INTERFACE_MODE_RMII ); + +pci_read_config_dword (QUARK_EMAC1 ,PCI_BASE_ADDRESS_0 , &base); + ret1 =designware_initialize (base,PHY_INTERFACE_MODE_RMII ); + +if (ret0 <0 && ret1 <0 ) +return -1 ; +else +return 0 ; +}
include/configs/galileo.h +5 -0
@@ -57,4 +57,9 @@#define CONFIG_MMC_SDMA #define CONFIG_CMD_MMC +/* 10/100M Ethernet support */ +#define CONFIG_DESIGNWARE_ETH +#define CONFIG_DW_ALTDESCRIPTOR +#define CONFIG_PHYLIB +#endif /* __CONFIG_H */
Signature · 1 line
1.8.2.1
PATCH 1/1 x86: quark: Enable on-chip ethernet controllers
Hi Bin,
Quoted 61 lines · Bin Meng
Intel Quark SoC integrates two 10/100 ethernet controllers which can be connected to an external RMII PHY. The MAC IP is from Designware. Enable this support with the existing U-Boot Designware MAC driver so that the ethernet port on Intel Galileo board can be used.
Signed-off-by Bin Meng <[email protected]>---
arch/x86/cpu/quark/quark.c | 19 +++++++++++++++++++ include/configs/galileo.h | 5 +++++ 2 files changed, 24 insertions(+)arch/x86/cpu/quark/quark.c +19
-0@@ -6,6 +6,8 @@#include <common.h> #include <mmc.h> +#include <netdev.h> +#include <phy.h> #include <asm/io.h> #include <asm/pci.h> #include <asm/post.h> @@ -116,3 +118,20 @@ int cpu_mmc_init(bd_t *bis)return pci_mmc_init ("Quark SDHCI" , mmc_supported,ARRAY_SIZE (mmc_supported)); } + +int cpu_eth_init (bd_t *bis) +{ +u32 base; +int ret0, ret1; + +pci_read_config_dword (QUARK_EMAC0 ,PCI_BASE_ADDRESS_0 , &base); + ret0 =designware_initialize (base,PHY_INTERFACE_MODE_RMII ); + +pci_read_config_dword (QUARK_EMAC1 ,PCI_BASE_ADDRESS_0 , &base); + ret1 =designware_initialize (base,PHY_INTERFACE_MODE_RMII ); + +if (ret0 <0 && ret1 <0 ) +return -1 ; +else +return 0 ; +}include/configs/galileo.h +5
-1@@ -57,4 +57,9 @@#define CONFIG_MMC_SDMA #define CONFIG_CMD_MMC +/* 10/100M Ethernet support */ +#define CONFIG_DESIGNWARE_ETH +#define CONFIG_DW_ALTDESCRIPTOR +#define CONFIG_PHYLIB +#endif /* __CONFIG_H */ --
Quoted 2 lines
1.8.2.1
BTW I expect the driver model Ethernet support to land soon, and I sent a series that moves the Designware Ethernet to driver model. So by the time we come to apply this, we may want to use that. But as things stand it looks good.
Regards,
Simon
PATCH 1/1 x86: quark: Enable on-chip ethernet controllers
Quoted 14 lines · Simon Glass
Hi Bin,
Quoted 11 lines · Bin Meng
Intel Quark SoC integrates two 10/100 ethernet controllers which can be connected to an external RMII PHY. The MAC IP is from Designware. Enable this support with the existing U-Boot Designware MAC driver so that the ethernet port on Intel Galileo board can be used.
Signed-off-by Bin Meng <[email protected]>---
arch/x86/cpu/quark/quark.c | 19 +++++++++++++++++++ include/configs/galileo.h | 5 +++++ 2 files changed, 24 insertions(+)
Since this only affects this new board we may as well apply it now.
Applied to u-boot-x86, thanks!