fs: show locked and lock_ro options in mountinfo
PATCH 1/1 fs: show locked and lock_ro options in mountinfo
I don't see any reasons to hide them. This information can help to understand errors.
And this information is required for correct checkpoint/restore of mount namespaces.
--- fs/proc_namespace.c | 2 ++ 1 file changed, 2 insertions(+)
fs/proc_namespace.c +2 -0
@@ -66,6 +66,8 @@ static void show_mnt_opts(struct seq_file *m, struct vfsmount *mnt) { MNT_NOATIME, ",noatime" }, { MNT_NODIRATIME, ",nodiratime" }, { MNT_RELATIME, ",relatime" }, + { MNT_LOCKED, ",locked" }, + { MNT_LOCK_READONLY, ",lock_ro"}, { 0, NULL } };const struct proc_fs_info *fs_infop;
Signature · 1 line
2.1.0
Quoted 2 lines · Andrey Vagin
I don't see any reasons to hide them. This information can help to understand errors.
Because these flags are set/read only internally by the VFS. In contrast to the other flags shown by mountinfo MNT_LOCKED is not a mount option.
Why does it help to debug errors?
How would a user know that mount() with MS_BIND returns EINVAL because the mount source is MNT_LOCKED? This information is useless for her. If you argue like that you'd have to expose the whole VFS state to userland.
Quoted 2 lines
And this information is required for correct checkpoint/restore of mount namespaces.
Why especially MNT_LOCKED and not all the other flags used by VFS? Say MNT_DOOMED?
Signature · 2 lines
Thanks, //richard
2015-03-28 0:42 GMT+03:00 Richard Weinberger <[email protected]>:
Quoted 6 lines · Andrey Vagin
Quoted 2 lines
I don't see any reasons to hide them. This information can help to understand errors.
Because these flags are set/read only internally by the VFS. In contrast to the other flags shown by mountinfo
MNT_LOCKEDis not a mount option.
But this flag is set as a result of the specified user action, when he unshares userns and mntns. This flag affects visiable behaviour.
Quoted 4 lines
Why does it help to debug errors?
How would a user know thatmount()withMS_BINDreturns EINVAL because the mount source isMNT_LOCKED? This information is useless for her.
If I see lock_ro, I can be sure that mount -o remount,bind,rw /XXX will fail. If I see locked, I know that this mount can't be umounted or moved and can be bind-mounted only recursively.
If a user see these flags, he can check that a mount namespace is configured correctly without security issues.
Sorry but I don't understand why you think that this information is useless for users.
Quoted 1 line
If you argue like that you'd have to expose the whole VFS state to userland.
I have not noticed other MNT_LOCK_* flags. I should think more about what information are a really required for dumping mount namespaces.
Quoted 5 lines
Quoted 3 lines
And this information is required for correct checkpoint/restore of mount namespaces.
Why especially
MNT_LOCKEDand not all the other flags used by VFS?
My goal is to dump enough information about a mount namespace to be able to restore it back later. I don't know how to do this without knowledge about locked mounts. I will think.
Quoted 1 line
Say
MNT_DOOMED?
Mounts with MNT_DOOMED are never shown in mountinfo, are they?
Thank you for looking at this patch.
Quoted 4 lines
--
Thanks,
//richard
Hi!
Am 27.03.2015 um 23:35 schrieb Andrey Wagin:
Quoted 10 lines
2015-03-28 0:42 GMT+03:00 Richard Weinberger <[email protected]>:
Quoted 6 lines · Andrey Vagin
Quoted 2 lines
I don't see any reasons to hide them. This information can help to understand errors.
Because these flags are set/read only internally by the VFS. In contrast to the other flags shown by mountinfo
MNT_LOCKEDis not a mount option.But this flag is set as a result of the specified user action, when he unshares userns and mntns. This flag affects visiable behaviour.
It is a implicit result. Used by the VFS internally.
If you expose it it becomes ABI and changing the behavior will be tricky or impossible.
Quoted 9 lines
Quoted 4 lines
Why does it help to debug errors?
How would a user know thatmount()withMS_BINDreturns EINVAL because the mount source isMNT_LOCKED? This information is useless for her.If I see
lock_ro, I can be sure that mount -o remount,bind,rw /XXX will fail. If I see locked, I know that this mount can't be umounted or moved and can be bind-mounted only recursively.
Quoted 5 lines
If a user see these flags, he can check that a mount namespace is configured correctly without security issues.
Sorry but I don't understand why you think that this information is useless for users.
You can only know if you know how the VFS works internally.
If know that EINVAL from mount(2) with MS_BIND can be caused by MNT_LOCKED because I know the source. I bet you know the source too. But not Joey random admin who looks into mountinfo to figure out why something does not work.
If you expose MNT_LOCKED to userspace you'll have to update also the mount(2) manpage with all glory details of that flag.
Quoted 6 lines
Quoted 1 line
If you argue like that you'd have to expose the whole VFS state to userland.
I have not noticed other MNT_LOCK_* flags. I should think more about what information are a really required for dumping mount namespaces.
Quoted 1 line
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
And this information is required for correct checkpoint/restore of mount namespaces.
Why especially
MNT_LOCKEDand not all the other flags used by VFS?My goal is to dump enough information about a mount namespace to be able to restore it back later. I don't know how to do this without knowledge about locked mounts. I will think.
How do you plan to restore a MNT_LOCKED mount?
IIRC we have currently no way to directly set MNT_LOCKED from userspace.
Quoted 3 lines
Quoted 1 line
Say
MNT_DOOMED?Mounts with
MNT_DOOMEDare never shown in mountinfo, are they?
It was just an example. There are other flags too, did you double check which ones you really need?
To make the story short, my concern is that exposing such flags to userspace has to be well thought. :-)
As long they are just internal we can change them as we like, as soon userspace depends somehow on it the pain begins.
Thanks,
//richard
2015-03-28 1:47 GMT+03:00 Richard Weinberger <[email protected]>:
Quoted 50 lines
Hi!
Am 27.03.2015 um 23:35 schrieb Andrey Wagin:
Quoted 10 lines
2015-03-28 0:42 GMT+03:00 Richard Weinberger <[email protected]>:
Quoted 6 lines · Andrey Vagin
Quoted 2 lines
I don't see any reasons to hide them. This information can help to understand errors.
Because these flags are set/read only internally by the VFS. In contrast to the other flags shown by mountinfo
MNT_LOCKEDis not a mount option.But this flag is set as a result of the specified user action, when he unshares userns and mntns. This flag affects visiable behaviour.
It is a implicit result. Used by the VFS internally.
If you expose it it becomes ABI and changing the behavior will be tricky or impossible.Quoted 9 lines
Quoted 4 lines
Why does it help to debug errors?
How would a user know thatmount()withMS_BINDreturns EINVAL because the mount source isMNT_LOCKED? This information is useless for her.If I see
lock_ro, I can be sure that mount -o remount,bind,rw /XXX will fail. If I see locked, I know that this mount can't be umounted or moved and can be bind-mounted only recursively.Quoted 5 lines
If a user see these flags, he can check that a mount namespace is configured correctly without security issues.
Sorry but I don't understand why you think that this information is useless for users.
You can only know if you know how the VFS works internally.
If know that EINVAL from mount(2) withMS_BINDcan be caused byMNT_LOCKEDbecause I know the source. I bet you know the source too. But not Joey random admin who looks into mountinfo to figure out why something does not work.If you expose
MNT_LOCKEDto userspace you'll have to update also the mount(2) manpage with all glory details of that flag.Quoted 9 lines
Quoted 1 line
If you argue like that you'd have to expose the whole VFS state to userland.
I have not noticed other MNT_LOCK_* flags. I should think more about what information are a really required for dumping mount namespaces.
Quoted 4 lines
Quoted 3 lines
And this information is required for correct checkpoint/restore of mount namespaces.
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
Why especially
MNT_LOCKEDand not all the other flags used by VFS?My goal is to dump enough information about a mount namespace to be able to restore it back later. I don't know how to do this without knowledge about locked mounts. I will think.
How do you plan to restore a
MNT_LOCKEDmount?
IIRC we have currently no way to directly setMNT_LOCKEDfrom userspace.
It's the second question. The first question is how to check that we will be able to restore what we are dumping.
If CRIU meets something what it doesn't know how to restore, it (must) refuses to dump this configuration.
Quoted 5 lines
Quoted 4 lines
Quoted 2 lines
Say
MNT_DOOMED?Mounts with
MNT_DOOMEDare never shown in mountinfo, are they?
Quoted 7 lines
It was just an example. There are other flags too, did you double check which ones you really need?
To make the story short, my concern is that exposing such flags to userspace has to be well thought. :-)
As long they are just internal we can change them as we like, as soon userspace depends somehow on it the pain begins.
I'm agree with you. I'm going to think more about this. Thank you for response.
Quoted 3 lines
Thanks,
//richard
Quoted 57 lines · Andrey Wagin
2015-03-28 1:47 GMT+03:00 Richard Weinberger <[email protected]>:
Quoted 56 lines
Hi!
Am 27.03.2015 um 23:35 schrieb Andrey Wagin:
Quoted 10 lines
2015-03-28 0:42 GMT+03:00 Richard Weinberger <[email protected]>:
Quoted 6 lines · Andrey Vagin
Quoted 2 lines
I don't see any reasons to hide them. This information can help to understand errors.
Because these flags are set/read only internally by the VFS. In contrast to the other flags shown by mountinfo
MNT_LOCKEDis not a mount option.But this flag is set as a result of the specified user action, when he unshares userns and mntns. This flag affects visiable behaviour.
It is a implicit result. Used by the VFS internally.
If you expose it it becomes ABI and changing the behavior will be tricky or impossible.Quoted 9 lines
Quoted 4 lines
Why does it help to debug errors?
How would a user know thatmount()withMS_BINDreturns EINVAL because the mount source isMNT_LOCKED? This information is useless for her.If I see
lock_ro, I can be sure that mount -o remount,bind,rw /XXX will fail. If I see locked, I know that this mount can't be umounted or moved and can be bind-mounted only recursively.Quoted 5 lines
If a user see these flags, he can check that a mount namespace is configured correctly without security issues.
Sorry but I don't understand why you think that this information is useless for users.
You can only know if you know how the VFS works internally.
If know that EINVAL from mount(2) withMS_BINDcan be caused byMNT_LOCKEDbecause I know the source. I bet you know the source too. But not Joey random admin who looks into mountinfo to figure out why something does not work.If you expose
MNT_LOCKEDto userspace you'll have to update also the mount(2) manpage with all glory details of that flag.Quoted 14 lines
Quoted 1 line
If you argue like that you'd have to expose the whole VFS state to userland.
I have not noticed other MNT_LOCK_* flags. I should think more about what information are a really required for dumping mount namespaces.
Quoted 5 lines
Quoted 3 lines
And this information is required for correct checkpoint/restore of mount namespaces.
Why especially
MNT_LOCKEDand not all the other flags used by VFS?My goal is to dump enough information about a mount namespace to be able to restore it back later. I don't know how to do this without knowledge about locked mounts. I will think.
Quoted 8 lines
Quoted 2 lines
How do you plan to restore a
MNT_LOCKEDmount?
IIRC we have currently no way to directly setMNT_LOCKEDfrom userspace.It's the second question. The first question is how to check that we will be able to restore what we are dumping.
If CRIU meets something what it doesn't know how to restore, it (must) refuses to dump this configuration.
As a practical matter if the underlying directory is empty, and will remain empty MNT_LOCKED does not matter.
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
Say
MNT_DOOMED?Mounts with
MNT_DOOMEDare never shown in mountinfo, are they?It was just an example. There are other flags too, did you double check which ones you really need?
Quoted 7 lines
Quoted 4 lines
To make the story short, my concern is that exposing such flags to userspace has to be well thought. :-)
As long they are just internal we can change them as we like, as soon userspace depends somehow on it the pain begins.I'm agree with you. I'm going to think more about this. Thank you for response.
A big question from me is do you have the ability to find the user namespace of a mount namespace. Without that these mount flags do not matter.
I would think getting the user namespace of mount namespace and getting the mount propgation tree correct would precede little things like worrying if the mount propagation state is correct.
Eric