clk: introduce clk_div_mask() helper
Subsystems (8)
PATCH 1/7 clk: introduce clk_div_mask() helper
The patch introduces a helper that gives a divider mask based on register field width.
The sequential patches will replace custom div_mask() macro in the corresponding clock provider modules.
--- include/linux/clk-provider.h | 5 +++++ 1 file changed, 5 insertions(+)
include/linux/clk-provider.h +5 -0
@@ -353,6 +353,11 @@ struct clk_divider {spinlock_t *lock; }; +static inline clk_div_mask(u8 width) +{ +return (1 << width) -1 ; +} +#define CLK_DIVIDER_ONE_BASED BIT(0)#define CLK_DIVIDER_POWER_OF_TWO BIT(1)#define CLK_DIVIDER_ALLOW_ZERO BIT(2)
Signature · 1 line
2.1.4
PATCH 2/7 clk: mmp: switch to clk_div_mask()
Convert the code to use clk_div_mask() helper instead of custom approach.
--- drivers/clk/mmp/clk-mix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/mmp/clk-mix.c +1 -1
@@ -26,7 +26,7 @@static unsigned int _get_maxdiv (struct mmp_clk_mix *mix) { -unsigned int div_mask = (1 << mix->reg_info.width_div) -1 ; +unsigned int div_mask =clk_div_mask (mix->reg_info.width_div);unsigned int maxdiv =0 ;struct clk_div_table *clkt;
Signature · 1 line
2.1.4
PATCH 3/7 clk: divider: switch to clk_div_mask()
In reply to Andy ShevchenkoConvert the code to use clk_div_mask() helper instead of div_mask() macro.
--- drivers/clk/clk-divider.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-)
drivers/clk/clk-divider.c +8 -10
@@ -30,8 +30,6 @@#define to_clk_divider (_hw) container_of(_hw, struct clk_divider, hw) -#define div_mask (width) ((1 << (width)) - 1) -static unsigned int _get_table_maxdiv (const struct clk_div_table *table) {unsigned int maxdiv =0 ;
@@ -58,12 +56,12 @@ static unsigned int _get_maxdiv(const struct clk_div_table *table, u8 width, unsigned long flags) {if (flags &CLK_DIVIDER_ONE_BASED ) -return div_mask (width); +return clk_div_mask (width);if (flags &CLK_DIVIDER_POWER_OF_TWO ) -return 1 <<div_mask (width); +return 1 <<clk_div_mask (width);if (table)return _get_table_maxdiv (table); -return div_mask (width) +1 ; +return clk_div_mask (width) +1 ; } static unsigned int _get_table_div(const struct clk_div_table *table,
@@ -138,7 +136,7 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw,unsigned int val; val =clk_readl (divider->reg) >> divider->shift; - val &=div_mask (divider->width); + val &=clk_div_mask (divider->width);return divider_recalc_rate (hw, parent_rate, val, divider->table, divider->flags);
@@ -350,7 +348,7 @@ static long clk_divider_round_rate(struct clk_hw *hw, unsigned long rate,/* if read only, just return current value */ if (divider->flags &CLK_DIVIDER_READ_ONLY ) { bestdiv =readl (divider->reg) >> divider->shift; - bestdiv &=div_mask (divider->width); + bestdiv &=clk_div_mask (divider->width); bestdiv =_get_div (divider->table, bestdiv, divider->flags);return DIV_ROUND_UP (*prate, bestdiv); }
@@ -372,7 +370,7 @@ int divider_get_val(unsigned long rate, unsigned long parent_rate, value =_get_val (table, div, flags); - return min_t(unsigned int, value, div_mask(width)); + return min_t(unsigned int, value, clk_div_mask(width)); }EXPORT_SYMBOL_GPL (divider_get_val);
@@ -391,10 +389,10 @@ static int clk_divider_set_rate(struct clk_hw *hw, unsigned long rate,spin_lock_irqsave (divider->lock, flags);if (divider->flags &CLK_DIVIDER_HIWORD_MASK ) { - val =div_mask (divider->width) << (divider->shift +16 ); + val =clk_div_mask (divider->width) << (divider->shift +16 ); }else { val =clk_readl (divider->reg); - val &= ~(div_mask (divider->width) << divider->shift); + val &= ~(clk_div_mask (divider->width) << divider->shift); } val |= value << divider->shift;clk_writel (val, divider->reg);
Signature · 1 line
2.1.4
PATCH 4/7 clk: socfpga: switch to clk_div_mask()
In reply to Andy ShevchenkoConvert the code to use clk_div_mask() helper instead of div_mask() macro.
--- drivers/clk/socfpga/clk-gate.c | 2 +- drivers/clk/socfpga/clk-periph.c | 2 +- drivers/clk/socfpga/clk.h | 1 - 3 files changed, 2 insertions(+), 3 deletions(-)
drivers/clk/socfpga/clk-gate.c +1 -1
@@ -110,7 +110,7 @@ static unsigned long socfpga_clk_recalc_rate(struct clk_hw *hwclk, div = socfpgaclk->fixed_div; else if (socfpgaclk->div_reg) { val =readl (socfpgaclk->div_reg) >> socfpgaclk->shift; - val &=div_mask (socfpgaclk->width); + val &=clk_div_mask (socfpgaclk->width);/* Check for GPIO_DB_CLK by its offset */ if ((int ) socfpgaclk->div_reg &SOCFPGA_GPIO_DB_CLK_OFFSET ) div = val +1 ;
drivers/clk/socfpga/clk-periph.c +1 -1
@@ -36,7 +36,7 @@ static unsigned long clk_periclk_recalc_rate(struct clk_hw *hwclk, }else {if (socfpgaclk->div_reg) { val =readl (socfpgaclk->div_reg) >> socfpgaclk->shift; - val &=div_mask (socfpgaclk->width); + val &=clk_div_mask (socfpgaclk->width); parent_rate /= (val +1 ); } div = ((readl (socfpgaclk->hw.reg) &0x1ff ) +1 );
drivers/clk/socfpga/clk.h +0 -1
@@ -27,7 +27,6 @@#define CLKMGR_PERPLL_SRC 0xAC#define SOCFPGA_MAX_PARENTS 3 -#define div_mask (width) ((1 << (width)) - 1)extern void __iomem *clk_mgr_base_addr;
Signature · 1 line
2.1.4
PATCH 5/7 clk: ti: divider: switch to clk_div_mask()
In reply to Andy ShevchenkoConvert the code to use clk_div_mask() helper instead of div_mask() macro.
--- drivers/clk/ti/divider.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-)
drivers/clk/ti/divider.c +8 -10
@@ -28,8 +28,6 @@#define to_clk_divider (_hw) container_of(_hw, struct clk_divider, hw) -#define div_mask (d) ((1 << ((d)->width)) - 1) -static unsigned int _get_table_maxdiv (const struct clk_div_table *table) {unsigned int maxdiv =0 ;
@@ -44,12 +42,12 @@ static unsigned int _get_table_maxdiv(const struct clk_div_table *table)static unsigned int _get_maxdiv (struct clk_divider *divider) {if (divider->flags &CLK_DIVIDER_ONE_BASED ) -return div_mask (divider); +return clk_div_mask (divider);if (divider->flags &CLK_DIVIDER_POWER_OF_TWO ) -return 1 <<div_mask (divider); +return 1 <<clk_div_mask (divider);if (divider->table)return _get_table_maxdiv (divider->table); -return div_mask (divider) +1 ; +return clk_div_mask (divider) +1 ; } static unsigned int _get_table_div(const struct clk_div_table *table,
@@ -103,7 +101,7 @@ static unsigned long ti_clk_divider_recalc_rate(struct clk_hw *hw,unsigned int div, val; val = ti_clk_ll_ops->clk_readl (divider->reg) >> divider->shift; - val &=div_mask (divider); + val &=clk_div_mask (divider); div =_get_div (divider, val);if (!div) {
@@ -225,17 +223,17 @@ static int ti_clk_divider_set_rate(struct clk_hw *hw, unsigned long rate, div =DIV_ROUND_UP (parent_rate, rate); value =_get_val (divider, div); -if (value >div_mask (divider)) - value =div_mask (divider); +if (value >clk_div_mask (divider)) + value =clk_div_mask (divider);if (divider->lock)spin_lock_irqsave (divider->lock, flags);if (divider->flags &CLK_DIVIDER_HIWORD_MASK ) { - val =div_mask (divider) << (divider->shift +16 ); + val =clk_div_mask (divider) << (divider->shift +16 ); }else { val = ti_clk_ll_ops->clk_readl (divider->reg); - val &= ~(div_mask (divider) << divider->shift); + val &= ~(clk_div_mask (divider) << divider->shift); } val |= value << divider->shift; ti_clk_ll_ops->clk_writel (val, divider->reg);
Signature · 1 line
2.1.4
PATCH 6/7 clk: tegra: switch to clk_div_mask()
In reply to Andy ShevchenkoConvert the code to use clk_div_mask() helper instead of div_mask() macro.
--- drivers/clk/tegra/clk-divider.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/clk/tegra/clk-divider.c +3 -4
@@ -24,9 +24,8 @@#include "clk.h" #define pll_out_override (p) (BIT((p->shift - 6))) -#define div_mask (d) ((1 << (d->width)) - 1)#define get_mul (d) (1 << d->frac_width) -#define get_max_div (d) div_mask(d) +#define get_max_div (d) clk_div_mask(d)#define PERIPH_CLK_UART_DIV_ENB BIT(24)
@@ -73,7 +72,7 @@ static unsigned long clk_frac_div_recalc_rate(struct clk_hw *hw,u64 rate = parent_rate; reg =readl_relaxed (divider->reg) >> divider->shift; - div = reg &div_mask (divider); + div = reg &clk_div_mask (divider); mul =get_mul (divider); div += mul;
@@ -120,7 +119,7 @@ static int clk_frac_div_set_rate(struct clk_hw *hw, unsigned long rate,spin_lock_irqsave (divider->lock, flags); val =readl_relaxed (divider->reg); - val &= ~(div_mask (divider) << divider->shift); + val &= ~(clk_div_mask (divider) << divider->shift); val |= div << divider->shift;if (divider->flags &TEGRA_DIVIDER_UART ) {
Signature · 1 line
2.1.4
PATCH 7/7 ARM: imx: switch to clk_div_mask()
In reply to Andy ShevchenkoConvert the code to use clk_div_mask() helper instead of div_mask() macro.
--- arch/arm/mach-imx/clk-fixup-div.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
arch/arm/mach-imx/clk-fixup-div.c +3 -4
@@ -16,7 +16,6 @@#include "clk.h" #define to_clk_div (_hw) container_of(_hw, struct clk_divider, hw) -#define div_mask (d) ((1 << (d->width)) - 1)/** * struct clk_fixup_div - imx integer fixup divider clock
@@ -70,13 +69,13 @@ static int clk_fixup_div_set_rate(struct clk_hw *hw, unsigned long rate,/* Zero based divider */ value = divider -1 ; -if (value >div_mask (div)) - value =div_mask (div); +if (value >clk_div_mask (div)) + value =clk_div_mask (div);spin_lock_irqsave (div->lock, flags); val =readl (div->reg); - val &= ~(div_mask (div) << div->shift); + val &= ~(clk_div_mask (div) << div->shift); val |= value << div->shift; fixup_div->fixup (&val);writel (val, div->reg);
Signature · 1 line
2.1.4