b191f9b106e: -8.8% netperf.time.minor_page_faults
FYI, we noticed the below changes on
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
commit b191f9b106ea1a24a711dbebb2925d3313da5852 ("mm: numa: preserve PTE write permissions across a NUMA hinting fault")
testbox/testcase/testparams: lkp-ne02/netperf/performance-300s-200%-TCP_SENDFILE
bea66fbd11af1ca9 b191f9b106ea1a24a711dbebb2
---------------- --------------------------
%stddev %change %stddev
\ | \
13115 ± 0% -8.8% 11968 ± 0% netperf.time.minor_page_faults
65.63 ± 6% -14.6% 56.05 ± 7% netperf.time.user_time
65.63 ± 6% -14.6% 56.05 ± 7% time.user_time
728886 ± 12% -29.2% 516121 ± 25% proc-vmstat.pgalloc_dma32
259 ± 12% -21.8% 203 ± 19% sched_debug.cfs_rq[10]:/.tg_load_contrib
139 ± 26% -40.9% 82 ± 48% sched_debug.cfs_rq[10]:/.blocked_load_avg
1437779 ± 5% -9.7% 1298979 ± 2% sched_debug.cfs_rq[11]:/.max_vruntime
1437779 ± 5% -9.7% 1298979 ± 2% sched_debug.cfs_rq[11]:/.MIN_vruntime
518 ± 37% -52.1% 248 ± 40% sched_debug.cfs_rq[3]:/.tg_load_contrib
117 ± 6% +13.5% 132 ± 9% sched_debug.cfs_rq[3]:/.load
191 ± 28% +71.7% 328 ± 35% sched_debug.cfs_rq[7]:/.tg_load_contrib
306355 ± 47% -33.0% 205153 ± 1% sched_debug.cpu#11.nr_switches
306423 ± 47% -33.0% 205208 ± 1% sched_debug.cpu#11.sched_count
1050 ± 13% +59.2% 1672 ± 18% sched_debug.cpu#15.curr->pid
1020 ± 6% +35.1% 1379 ± 6% sched_debug.cpu#4.curr->pid
1082 ± 18% +44.5% 1563 ± 28% sched_debug.cpu#5.curr->pid
1215 ± 14% -17.6% 1001 ± 7% sched_debug.cpu#8.curr->pidlkp-ne02: Nehalem-EP
Memory: 5G
netperf.time.minor_page_faults
13400 ++---------------------------------*--------------------------------+
| *.. *.. : |
13200 *+. .. .. *.. .*..*.. : *..*..*..*..*.. .*..*.. |
13000 ++ * *..* *..*. * *..*. *..*
| |
12800 ++ |
| |
12600 ++ |
| |
12400 ++ |
12200 ++ |
| |
12000 O+ O O O O O |
| O O O O O O O O O O O O O O |11800 ++------------------------------------------------------------------+
[*] bisect-good sample
[O] bisect-bad sample
To reproduce:
apt-get install ruby
git clone git://git.kernel.org/pub/scm/linux/kernel/git/wfg/lkp-tests.git
cd lkp-tests
bin/setup-local job.yaml # the job file attached in this email
bin/run-local job.yaml
Disclaimer:
Results have been estimated based on internal Intel analysis and are provided for informational purposes only. Any difference in system hardware or software design or configuration may affect actual performance.
Thanks,
Ying Huang
_______________________________________________
LKP mailing list
LKP(a)linux.intel.com
---
testcase: netperf
default-monitors:
wait: pre-test
uptime:
iostat:
vmstat:
numa-numastat:
numa-vmstat:
numa-meminfo:
proc-vmstat:
proc-stat:
meminfo:
slabinfo:
interrupts:
lock_stat:
latency_stats:
softirqs:
bdi_dev_mapping:
diskstats:
nfsstat:
cpuidle:
cpufreq-stats:
turbostat:
pmeter:
sched_debug:
interval: 10
default-watchdogs:
watch-oom:
watchdog:cpufreq_governor: performance
commit: e42391cd048809d903291d07f86ed3934ce138e9
model: Nehalem-EP
memory: 5Gnr_hdd_partitions: 12hdd_partitions: "/dev/disk/by-id/scsi-35000c5000*part1"swap_partitions: "/dev/disk/by-id/scsi-SATA_ST3500320NS_9QM6YWTY-part2"
runtime: 300snr_threads: 200%
perf-profile:
freq: 800
cluster: cs-localhost
if role server:
netserver:
if role client:
netperf:
test: TCP_SENDFILE
testbox: lkp-ne02tbox_group: lkp-ne02
kconfig: x86_64-rhelenqueue_time: 2015-03-31 11:57:48.297146032 +08:00head_commit: 051d101ddcd268a7429d6892c089c1c0858df20bbase_commit: e42391cd048809d903291d07f86ed3934ce138e9
branch: linux-devel/devel-hourly-2015033109
kernel: "/kernel/x86_64-rhel/e42391cd048809d903291d07f86ed3934ce138e9/vmlinuz-4.0.0-rc6"
user: lkp
queue: cyclic
rootfs: debian-x86_64-2015-02-07.cgzresult_root: "/result/lkp-ne02/netperf/performance-300s-200%-TCP_SENDFILE/debian-x86_64-2015-02-07.cgz/x86_64-rhel/e42391cd048809d903291d07f86ed3934ce138e9/0"node_roles: server clientjob_file: "/lkp/scheduled/lkp-ne02/cyclic_netperf-performance-300s-200%-TCP_SENDFILE-x86_64-rhel-BASE-e42391cd048809d903291d07f86ed3934ce138e9-0-20150331-32956-1uhguoe.yaml"dequeue_time: 2015-03-31 12:29:34.133136287 +08:00nr_cpu: "$(nproc)"max_uptime: 1500modules_initrd: "/kernel/x86_64-rhel/e42391cd048809d903291d07f86ed3934ce138e9/modules.cgz"bm_initrd: "/lkp/benchmarks/turbostat.cgz,/lkp/benchmarks/netperf-debian.cgz,/lkp/benchmarks/netperf.cgz"job_state: finished
loadavg: 34.91 29.35 13.49 1/214 9318start_time: '1427776206'end_time: '1427776507'
version: "/lkp/lkp/.src-20150331-104755"
echo performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu10/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu11/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu12/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu13/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu14/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu15/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu5/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu6/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu7/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu8/cpufreq/scaling_governor echo performance > /sys/devices/system/cpu/cpu9/cpufreq/scaling_governor netserver
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
netperf -t TCP_SENDFILE -c -C -l 300
Quoted 8 lines · Huang Ying
FYI, we noticed the below changes on
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.gitmaster
commitb191f9b106ea1a24a711dbebb2925d3313da5852("mm: numa: preserve PTE write permissions across a NUMA hinting fault")testbox/testcase/testparams: lkp-ne02/netperf/performance-300s-200%-TCP_SENDFILE
Quoted 7 lines
bea66fbd11af1ca9b191f9b106ea1a24a711dbebb2
---------------- --------------------------%stddev %change %stddev \ | \ 13115 ± 0% -8.8% 11968 ± 0% netperf.time.minor_page_faults 65.63 ± 6% -14.6% 56.05 ± 7% netperf.time.user_time 65.63 ± 6% -14.6% 56.05 ± 7% time.user_time
Hmmm, is this a positive report? It looks like it -- fewer faults at least. Lower user_time is ambiguous because the elapsed time is not included in the report and netperf has variable time depending on whether it can get a confident result or not.
Quoted 16 lines · Mel Gorman
Quoted 4 lines · Huang Ying
FYI, we noticed the below changes on
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.gitmaster commitb191f9b106ea1a24a711dbebb2925d3313da5852("mm: numa: preserve PTEwrite permissions across a NUMA hinting fault")
Quoted 3 lines
testbox/testcase/testparams:
lkp-ne02/netperf/performance-300s-200%-TCP_SENDFILE
Quoted 6 lines
bea66fbd11af1ca9b191f9b106ea1a24a711dbebb2
---------------- --------------------------%stddev %change %stddev \ | \ 13115 ± 0% -8.8% 11968 ± 0%
Quoted 6 lines
netperf.time.minor_page_faults
Quoted 2 lines
65.63 ± 6% -14.6% 56.05 ± 7% netperf.time.user_time 65.63 ± 6% -14.6% 56.05 ± 7% time.user_timeHmmm, is this a positive report? It looks like it -- fewer faults at least.
Yes. I think so too.
Quoted 4 lines
Lower
user_timeis ambiguous because the elapsed time is not included in the report and netperf has variable time depending on whether it can get a confident result or not.
elapsed time is not included in the report because there is no enough difference between commits, details are as follow:
2367 ± 0% +0.2% 2371 ± 0% time.system_time
807.50 ± 0% -0.2% 806.00 ± 0%
time.percent_of_cpu_this_job_got
301.06 ± 0% -0.0% 301.05 ± 0% time.elapsed_time
1.00 ± 0% +0.0% 1.00 ± 0% vmstat.cpu.us
95.25 ± 1% +1.8% 97.00 ± 0% vmstat.cpu.sy
2.00 ± 50% -50.0% 1.00 ± 0% vmstat.cpu.id
0.00 ± 0% +NaN% 0.00 vmstat.cpu.waBest Regards,
Huang, Ying