Skip to contentSkip to conversation

pci: iproc: Add Broadcom iProc PCIe support

PATCH In review Ray Jui 2 participants 5 messages Apr 8, 2015

Subsystems (4)

v8 of 9 In review Latest is v9 →

lore
Share & tools
lore

Ray Jui

author maintainer
#0 lore raw

v8 cover pci: iproc: Add Broadcom iProc PCIe support

This patch series adds the support for Broadcom iProc PCIe controller

pcie-iproc.c servers as the common core driver, and front-end bus interface needs to be added to support different bus interfaces

pcie-iproc-pltfm.c contains the support for the platform bus interface

Changes from v7:
- Consolidate iProc PCIe patches and rebase to v4.0-rc1 per request from Bjorn
- Restrict CONFIG_PCIE_IPROC to ARM based platforms
- Spell out 'pltfm' as 'platform'

Changes from v6:
- Fix print formatting
- Fix section mismatch warning by removing __init from the probe function
- Fix Kconfig to force it only compiling for ARM based platforms

Changes from v5:
- Sync code base to v4.0-rc2
- Change export symbols of common PCI functions to GPL only
- Add comment to describe how configuration register access are protected at the higher layer through 'pci_lock'
- Use generic PCI functions for configuration register access and implement 'map_bus' callback to support it
- Move 'pci_fixup_irqs' to before devices are added to the bus
- Remove 'extern' from function prototype declared in the header

Changes from v4:
- iProc PCIe driver module support was not included in patch series v4. This patch series (v5) fixes it

Changes from v3:
- Export symbols of several PCI functions so they can be used by drivers compiled as kernel module
- Add additional support to the Broadcom iProc PCIe driver so it can be installed/uninstalled as kernel loadable module

Changes from v2:
- Major rework of the PCIe driver to factor out common generic code from front-end bus interface. Support for generic platform bus interface is also added
- Adapt to several new PCI APIs that have been introduced lately

Changes from v1:
- Add standard PCI interrupt DT properties "#interrupt-cells", "interrupt-map-mask" and "interrupt-map" so legacy INTx interrupts can be supported by using standard PCI OF IRQ parsing function
- Get rid of custom IRQ mapping function in the driver. Use of_irq_parse_and_map_pci instead

Ray Jui (3):
PCI: Export symbols of PCI functions
PCI: iproc: Add DT docs for Broadcom iProc PCIe driver
pci: iproc: Add Broadcom iProc PCIe support

 .../devicetree/bindings/pci/brcm,iproc-pcie.txt    |   63 +++++
 drivers/pci/host/Kconfig                           |   19 ++
 drivers/pci/host/Makefile                          |    2 +
 drivers/pci/host/pcie-iproc-platform.c             |  108 ++++++++
 drivers/pci/host/pcie-iproc.c                      |  268 ++++++++++++++++++++
 drivers/pci/host/pcie-iproc.h                      |   42 +++
 drivers/pci/pci.c                                  |    1 +
 drivers/pci/probe.c                                |    1 +
 drivers/pci/remove.c                               |    2 +
 drivers/pci/setup-bus.c                            |    1 +
 drivers/pci/setup-irq.c                            |    1 +
 11 files changed, 508 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
 create mode 100644 drivers/pci/host/pcie-iproc-platform.c
 create mode 100644 drivers/pci/host/pcie-iproc.c
 create mode 100644 drivers/pci/host/pcie-iproc.h
Signature · 1 line
1.7.9.5
author maintainer
#1 lore raw

PATCH v8 1/3 PCI: Export symbols of PCI functions

Export symbols of the following PCI functions so they can be referenced by a PCI driver compiled as a kernel loadable module:

pci_common_swizzle
pci_create_root_bus
pci_stop_root_bus
pci_remove_root_bus
pci_assign_unassigned_bus_resources
pci_fixup_irqs

---
 drivers/pci/pci.c       |    1 +
 drivers/pci/probe.c     |    1 +
 drivers/pci/remove.c    |    2 ++
 drivers/pci/setup-bus.c |    1 +
 drivers/pci/setup-irq.c |    1 +
 5 files changed, 6 insertions(+)
drivers/pci/pci.c +1 -0
index 81f06e8..14e7f3c 100644
@@ -2492,6 +2492,7 @@ u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp)
 	*pinp = pin;
 	return PCI_SLOT(dev->devfn);
 }
+EXPORT_SYMBOL_GPL(pci_common_swizzle);
 
 /**
  *	pci_release_region - Release a PCI bar
drivers/pci/probe.c +1 -0
index 8d2f400..f13a78a 100644
@@ -1993,6 +1993,7 @@ err_out:
 	kfree(b);
 	return NULL;
 }
+EXPORT_SYMBOL_GPL(pci_create_root_bus);
 
 int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int bus_max)
 {
drivers/pci/remove.c +2 -0
index 8bd76c9..8a280e9 100644
@@ -139,6 +139,7 @@ void pci_stop_root_bus(struct pci_bus *bus)
 	/* stop the host bridge */
 	device_release_driver(&host_bridge->dev);
 }
+EXPORT_SYMBOL_GPL(pci_stop_root_bus);
 
 void pci_remove_root_bus(struct pci_bus *bus)
 {
@@ -158,3 +159,4 @@ void pci_remove_root_bus(struct pci_bus *bus)
 	/* remove the host bridge */
 	device_unregister(&host_bridge->dev);
 }
+EXPORT_SYMBOL_GPL(pci_remove_root_bus);
drivers/pci/setup-bus.c +1 -0
index e3e17f3..8169597 100644
@@ -1750,3 +1750,4 @@ void pci_assign_unassigned_bus_resources(struct pci_bus *bus)
 	__pci_bus_assign_resources(bus, &add_list, NULL);
 	BUG_ON(!list_empty(&add_list));
 }
+EXPORT_SYMBOL_GPL(pci_assign_unassigned_bus_resources);
drivers/pci/setup-irq.c +1 -0
index 4e2d595..95c225b 100644
@@ -65,3 +65,4 @@ void pci_fixup_irqs(u8 (*swizzle)(struct pci_dev *, u8 *),
 	for_each_pci_dev(dev)
 		pdev_fixup_irq(dev, swizzle, map_irq);
 }
+EXPORT_SYMBOL_GPL(pci_fixup_irqs);
Signature · 1 line
1.7.9.5
author maintainer
#2 lore raw

PATCH v8 2/3 PCI: iproc: Add DT docs for Broadcom iProc PCIe driver

In reply to Ray Jui

Document the Broadcom iProc PCIe platform interface device tree binding

---
 .../devicetree/bindings/pci/brcm,iproc-pcie.txt    |   63 ++++++++++++++++++++
 1 file changed, 63 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt new file +63 -0
new file mode 100644
index 0000000..f7ce50e
@@ -0,0 +1,63 @@
+* Broadcom iProc PCIe controller with the platform bus interface
+
+Required properties:
+- compatible: Must be "brcm,iproc-pcie"
+- reg: base address and length of the PCIe controller I/O register space
+- #interrupt-cells: set to <1>
+- interrupt-map-mask and interrupt-map, standard PCI properties to define the
+  mapping of the PCIe interface to interrupt numbers
+- linux,pci-domain: PCI domain ID. Should be unique for each host controller
+- bus-range: PCI bus numbers covered
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- device_type: set to "pci"
+- ranges: ranges for the PCI memory and I/O regions
+
+Optional properties:
+- phys: phandle of the PCIe PHY device
+- phy-names: must be "pcie-phy"
+
+Example:
+	pcie0: pcie@18012000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18012000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+
+		linux,pci-domain = <0>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x81000000 0 0	  0x28000000 0 0x00010000
+			  0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+
+		phys = <&phy 0 5>;
+		phy-names = "pcie-phy";
+	};
+
+	pcie1: pcie@18013000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18013000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+
+		linux,pci-domain = <1>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x81000000 0 0	  0x48000000 0 0x00010000
+			  0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+
+		phys = <&phy 1 6>;
+		phy-names = "pcie-phy";
+	};
Signature · 1 line
1.7.9.5
author maintainer
#3 lore raw

PATCH v8 3/3 pci: iproc: Add Broadcom iProc PCIe support

In reply to Ray Jui

PCI: iproc: Add Broadcom iProc PCIe support

Add support for the Broadcom iProc PCIe controller.

pcie-iproc.c is the common core driver, and front-end bus interface needs to be added to support different bus interfaces.

pcie-iproc-platform.c contains the support for the platform bus interface.

---
 drivers/pci/host/Kconfig               |   19 +++
 drivers/pci/host/Makefile              |    2 +
 drivers/pci/host/pcie-iproc-platform.c |  108 +++++++++++++
 drivers/pci/host/pcie-iproc.c          |  268 ++++++++++++++++++++++++++++++++
 drivers/pci/host/pcie-iproc.h          |   42 +++++
 5 files changed, 439 insertions(+)
 create mode 100644 drivers/pci/host/pcie-iproc-platform.c
 create mode 100644 drivers/pci/host/pcie-iproc.c
 create mode 100644 drivers/pci/host/pcie-iproc.h
drivers/pci/host/Kconfig +19 -0
index 7b892a9..1dfb567 100644
@@ -106,4 +106,23 @@ config PCI_VERSATILE
 	bool "ARM Versatile PB PCI controller"
 	depends on ARCH_VERSATILE
 
+config PCIE_IPROC
+	tristate "Broadcom iProc PCIe controller"
+	depends on OF && ARM
+	default n
+	help
+	  This enables the iProc PCIe core controller support for Broadcom's
+	  iProc family of SoCs. An appropriate bus interface driver also needs
+	  to be enabled
+
+config PCIE_IPROC_PLATFORM
+	tristate "Broadcom iProc PCIe platform bus driver"
+	depends on ARCH_BCM_IPROC || (ARM && COMPILE_TEST)
+	depends on OF
+	select PCIE_IPROC
+	default ARCH_BCM_IPROC
+	help
+	  Say Y here if you want to use the Broadcom iProc PCIe controller
+	  through the generic platform bus interface
+
 endmenu
drivers/pci/host/Makefile +2 -0
index e61d91c..f733b4e 100644
@@ -13,3 +13,5 @@ obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
 obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
 obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
 obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
+obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
+obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
drivers/pci/host/pcie-iproc-platform.c new file +108 -0

108 lines not on this page · raw message

drivers/pci/host/pcie-iproc.c new file +268 -0

268 lines not on this page · raw message

drivers/pci/host/pcie-iproc.h new file +42 -0

42 lines not on this page · raw message

Signature · 1 line
1.7.9.5
maintainer
#4 lore raw
In reply to Ray Jui
Quoted 5 lines · Ray Jui

This patch series adds the support for Broadcom iProc PCIe controller

pcie-iproc.c servers as the common core driver, and front-end bus interface needs to be added to support different bus interfaces

Quoted 7 lines

pcie-iproc-pltfm.c contains the support for the platform bus interface

Changes from v7:
- Consolidate iProc PCIe patches and rebase to v4.0-rc1 per request from Bjorn
- Restrict CONFIG_PCIE_IPROC to ARM based platforms
- Spell out 'pltfm' as 'platform'

Thanks, I applied this to pci/host-iproc and will merge it to "next" for v4.1 as soon as the build test completes.

Bjorn