Matrox G450 problems with 2.4.0 and xfree
Quoted 4 lines · J Brook
I don't have Windows installed on my machine, but I find that if I
cold boot to 2.2 (RH7) first and start up X (4.0.2 with Matrox driver 1.00.04 compiled in), I am then able to "shutdown -r now" and warm
Yes, they use same secret code... At least I think...
Quoted 6 lines
restart to 2.4 with FB acceleration enabled. This generally works fine for me.
This isn't generally too much of a problem because 2.4.x is so
stable
I don't have to reboot for weeks!
You can reboot any number of times you want. Just do not unplug powercord from computer...
Quoted 1 line
I'm willing to try out some patches if that would be useful.
Problem is that I really do not have any idea what's wrong - as after any change I do to driver, I cannot know for sure whether after boot it works because of I worked around some problem, or because of hardware powered up in `correct' state...
Best regards,
Petr Vandrovec [email protected]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 5 lines · Petr Vandrovec
Quoted 3 lines
I don't have Windows installed on my machine, but I find that if I
cold boot to 2.2 (RH7) first and start up X (4.0.2 with Matrox driver 1.00.04 compiled in), I am then able to "shutdown -r now" and warmYes, they use same secret code... At least I think...
Are you refering to Windows or Red Hat Linux? I can assure you that Red Hat Linux's XFree package doesn't have any secret code in it with 110% certainty. Nor will it have in the future.
Binary only modules are not acceptable in Red Hat Linux and I will not include them in XFree86 unless forced at gunpoint.
----------------------------------------------------------------------
Mike A. Harris - Linux advocate - Free Software advocate
This message is copyright 2001, all rights reserved.
Views expressed are my own, not necessarily shared by my employer.
----------------------------------------------------------------------
"If it isn't source, it isn't software." -- NASA
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/