Skip to contentSkip to conversation

Patch "drm: adv7511: Fix DDC error interrupt handling" has been added to the 3.19-stable tree

PATCH [email protected] 1 participant 1 message May 2, 2015

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

drm: adv7511: Fix DDC error interrupt handling

to the 3.19-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
drm-adv7511-fix-ddc-error-interrupt-handling.patch
and it can be found in the queue-3.19 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From 2e96206c4f952295e11c311fbb2a7aa2105024af Mon Sep 17 00:00:00 2001

From: Laurent Pinchart <[email protected]>
Date: Wed, 18 Feb 2015 15:19:33 +0200
Subject: drm: adv7511: Fix DDC error interrupt handling

From: Laurent Pinchart <[email protected]>

commit 2e96206c4f952295e11c311fbb2a7aa2105024af upstream.

The DDC error interrupt bit is located in REG_INT1, not REG_INT0. Update both the interrupt wait code and the interrupt sources reset code accordingly.

---
 drivers/gpu/drm/i2c/adv7511.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
drivers/gpu/drm/i2c/adv7511.c +10 -4
@@ -467,14 +467,16 @@ static int adv7511_get_edid_block(void *
 				     block);
 			ret = adv7511_wait_for_interrupt(adv7511,
 					ADV7511_INT0_EDID_READY |
-					ADV7511_INT1_DDC_ERROR, 200);
+					(ADV7511_INT1_DDC_ERROR << 8), 200);
 
 			if (!(ret & ADV7511_INT0_EDID_READY))
 				return -EIO;
 		}
 
 		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
-			     ADV7511_INT0_EDID_READY | ADV7511_INT1_DDC_ERROR);
+			     ADV7511_INT0_EDID_READY);
+		regmap_write(adv7511->regmap, ADV7511_REG_INT(1),
+			     ADV7511_INT1_DDC_ERROR);
 
 		/* Break this apart, hopefully more I2C controllers will
 		 * support 64 byte transfers than 256 byte transfers
@@ -528,7 +530,9 @@ static int adv7511_get_modes(struct drm_
 	/* Reading the EDID only works if the device is powered */
 	if (adv7511->dpms_mode != DRM_MODE_DPMS_ON) {
 		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
-			     ADV7511_INT0_EDID_READY | ADV7511_INT1_DDC_ERROR);
+			     ADV7511_INT0_EDID_READY);
+		regmap_write(adv7511->regmap, ADV7511_REG_INT(1),
+			     ADV7511_INT1_DDC_ERROR);
 		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
 				   ADV7511_POWER_POWER_DOWN, 0);
 		adv7511->current_edid_segment = -1;
@@ -563,7 +567,9 @@ static void adv7511_encoder_dpms(struct
 		adv7511->current_edid_segment = -1;
 
 		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
-			     ADV7511_INT0_EDID_READY | ADV7511_INT1_DDC_ERROR);
+			     ADV7511_INT0_EDID_READY);
+		regmap_write(adv7511->regmap, ADV7511_REG_INT(1),
+			     ADV7511_INT1_DDC_ERROR);
 		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
 				   ADV7511_POWER_POWER_DOWN, 0);
 		/*

Patches currently in stable-queue which might be from [email protected] are

queue-3.19/drm-adv7511-fix-ddc-error-interrupt-handling.patch queue-3.19/drm-adv7511-fix-nested-sleep-when-reading-edid.patch