v2 exynos_defconfig: Enable SENSORS_PWM_FAN, SENSORS_INA2XX, LEDS for OdroidXU3

Enable SENSORS_PWM_FAN, SENSORS_INA2XX, LEDS for OdroidXU3 on exynos_defonfig.

-Anand Moon

Enable CONFIG_SENSORS_PWM_FAN on exynos_defconfig to control fan power on Odroidxu3.

---
 arch/arm/configs/exynos_defconfig | 1 +
 1 file changed, 1 insertion(+)

index d034c96..3c2784f 100644
@@ -101,6 +101,7 @@ CONFIG_CHARGER_MAX77693=y
 CONFIG_CHARGER_TPS65090=y
 CONFIG_HWMON=y
 CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_PWM_FAN=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_THERMAL=y
 CONFIG_THERMAL=y

1.9.1

Odroidxu3 board support power monitor sensor.

Below is the output of boot log.

[    3.241438] ina2xx 0-0040: power monitor ina231 (Rshunt = 10000 uOhm)
[    3.248068] ina2xx 0-0041: power monitor ina231 (Rshunt = 10000 uOhm)
[    3.254724] ina2xx 0-0044: power monitor ina231 (Rshunt = 10000 uOhm)
[    3.261354] ina2xx 0-0045: power monitor ina231 (Rshunt = 10000 uOhm)

ina231-i2c-0-40

Adapter: s3c2410-i2c
in0:          +0.00 V
in1:          +1.01 V
power1:      175.00 mW
curr1:        +0.18 A

ina231-i2c-0-41

Adapter: s3c2410-i2c
in0:          +0.00 V
in1:          +1.21 V
power1:       50.00 mW
curr1:        +0.04 A

ina231-i2c-0-44

Adapter: s3c2410-i2c
in0:          +0.00 V
in1:          +1.02 V
power1:       50.00 mW
curr1:        +0.04 A

ina231-i2c-0-45

Adapter: s3c2410-i2c
in0:          +0.00 V
in1:          +1.04 V
power1:       75.00 mW
curr1:        +0.07 A

---
 arch/arm/configs/exynos_defconfig | 1 +
 1 file changed, 1 insertion(+)

index 3c2784f..300678a 100644
@@ -102,6 +102,7 @@ CONFIG_CHARGER_TPS65090=y
 CONFIG_HWMON=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_PWM_FAN=y
+CONFIG_SENSORS_INA2XX=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_THERMAL=y
 CONFIG_THERMAL=y

1.9.1

Enable CONFIG_LEDS_GPIO, CONFIG_LEDS_TRIGGERS, CONFIG_LEDS_TRIGGER_HEARTBEAT.

---
 arch/arm/configs/exynos_defconfig | 3 +++
 1 file changed, 3 insertions(+)

index 300678a..21411c5 100644
@@ -179,6 +179,9 @@ CONFIG_MMC_SDHCI_S3C_DMA=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_IDMAC=y
 CONFIG_MMC_DW_EXYNOS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_MAX77686=y
 CONFIG_RTC_DRV_MAX77802=y

1.9.1

s/Odroidxu3/Odroid XU3/ (or Odroid-XU3, just capitalize the symbol).

Please go back to default length of wrapping commit messages. This one exceeds it. Default is 75 characters so git log or git show output would fit in 80 characters terminal.

With these changes you can add my tag:

Best regards,
Krzysztof

1. s/Odroidxu3/Odroid XU3/ (or Odroid-XU3, just capitalize the symbol).
2. Remove the trailing stop (dot) from commit title.

With these changes you can add my tag:

Best regards,
Krzysztof

1. Remove the trailing stop (dot) from commit title.
2. Please go back to default length of wrapping commit messages. This one exceeds it. Default is 75 characters so git log or git show output would fit in 80 characters terminal.
3. It would be nice to see here WHY you are enabling these configs (what is the benefit). One sentence would be enough.

With these changes you can add my tag:

Best regards,
Krzysztof